HUYETT.COM • 785-392-3017

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

128For detailed specifications and tolerances, visi t Huyett.com.

Description How to IdentifyPerhaps the most popular and widely used radial retaining ring is the E-clip (so named because it is shaped like the letter “E”). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

DIN 6799****EXTERNAL – E-CLIP METRIC

Additional attribute data on adjacent page.

Item#

Nominal Size

Shaft Diameter Groove Size Ring Size & Weight Item#

Clearance Supplementary Data Use with ApplicatorDiameter Width Thickness2 Gap Weight Free Outside

DiameterInstalled in Groove

Edge Margin Thrust Load Ring3

Thrust Load Groove (smallest listed Ds)

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM LimitsStandard Material

Dg Ds Dg Tol. W Tol. T Tol. A Tol. kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

Ds' R/Ch Max.

P'r kNfrom to

DE-008 0.8 1.0 1.4 0.8 -0.040 0.24+0.04/-0.00

0.2 ±0.02 0.58 ±0.040 0.003 DE-008 1.95 2.25 0.4 0.08 0.03 1.2 0.3 0.04 50,000 RRA-708

DE-012 1.2 1.4 2.0 1.2 -0.060 0.34 0.3 ±0.02 1.01 ±0.040 0.009 DE-012 2.90 3.25 0.6 0.12 0.04 1.5 0.4 0.06 47,000 RRA-712

DE-015 1.5 2.0 2.5 1.5 -0.060 0.44 0.4 ±0.02 1.28 ±0.040 0.021 DE-015 3.90 4.25 0.8 0.22 0.07 2.0 0.6 0.11 42,000 RRA-715

DE-019 1.9 2.5 3.0 1.9 -0.060 0.54

+0.05/-0.00

0.5 ±0.02 1.61 ±0.040 0.040 DE-019 4.40 4.80 1.0 0.35 0.10 2.5 0.7 0.17 40,000 RRA-719

DE-023 2.3 3.0 4.0 2.3 -0.060 0.64 0.6 ±0.02 1.94 ±0.040 0.069 DE-023 5.90 6.30 1.0 0.50 0.15 3.0 0.9 0.24 38,000 RRA-723

DE-032 3.2 4.0 5.0 3.2 -0.075 0.64 0.6 ±0.02 2.70 ±0.040 0.088 DE-032 6.90 7.30 1.0 0.65 0.22 4.0 0.9 0.32 35,000 RRA-310

DE-040 4.0 5.0 7.0 4.0 -0.075 0.74 0.7 ±0.02 3.34 ±0.048 0.158 DE-040 8.85 9.30 1.2 0.95 0.25 5.0 1.0 0.47 32,000 RRA-340

DE-050 5.0 6.0 8.0 5.0 -0.075 0.74 0.7 ±0.02 4.11 ±0.048 0.236 DE-050 10.85 11.30 1.2 1.15 0.90 7.0 1.0 0.60 28,000 RRA-605

DE-060 6.0 7.0 9.0 6.0 -0.075 0.74 0.7 ±0.02 5.26 ±0.048 0.255 DE-060 11.80 12.30 1.2 1.35 1.10 8.0 1.1 0.70 25,000 RRA-606

DE-070 7.0 8.0 11.0 7.0 -0.090 0.94 0.9 ±0.02 5.84 ±0.048 0.474 DE-070 13.80 14.30 1.5 1.80 1.25 9.0 1.3 1.00 22,000 RRA-607

DE-080 8.0 9.0 12.0 8.0 -0.09 1.05

+0.08/-0.00

1.00 ±0.03 6.52 ±0.058 0.660 DE-080 15.75 16.3 1.8 2.50 1.42 10.0 1.5 1.25 20,000 RRA-608

DE-090 9.0 10.0 14.0 9.0 -0.09 1.15 1.10 ±0.03 7.63 ±0.058 1.090 DE-090 18.20 18.8 2.0 3.00 1.60 11.0 1.6 1.50 17,000 RRA-609

DE-100 10.0 11.0 15.0 10.0 -0.09 1.25 1.20 ±0.03 8.32 ±0.058 1.250 DE-100 19.70 20.4 2.0 3.50 1.70 12.0 1.8 1.75 15,000 RRA-610

DE-120 12.0 13.0 18.0 12.0 -0.11 1.35 1.30 ±0.03 10.45 ±0.070 1.630 DE-120 22.70 23.4 2.5 4.70 3.10 15.0 1.9 2.30 13,000 RRA-612

DE-150 15.0 16.0 24.0 15.0 -0.11 1.55 1.50 ±0.03 12.61 ±0.070 3.370 DE-150 28.70 29.4 3.0 7.80 7.00 20.0 2.2 3.30 11,000 RRA-615

DE-190 19.0 20.0 31.0 19.0 -0.13 1.80 1.75 ±0.03 15.92 ±0.070 6.420 DE-190 36.50 37.6 3.5 11 10.00 25.0 2.5 3.60 7,600 RRA-619

DE-240 24.0 25.0 38.0 24.0 -0.13 2.05 2.00 ±0.03 21.88 ±0.084 8.550 DE-240 43.50 44.6 4.0 15 13.00 30.0 3.0 4.00 5,500 –

DE-300 30.0 32.0 42.0 30.0 -0.13 2.55 2.50 ±0.03 25.80 ±0.084 13.50 DE-300 51.30 52.6 4.5 23 16.50 36.0 3.5 5.30 4,200 –

DE

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -BC • -SS • -ZD • -Z3

T

W

DsDg

d

GA

L2

Dg

1. Verify E-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.

Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions

T

W

DsDg

d

GA

Visit huyett.com to download Material, Compliance, and RoHS/REACH Certifications* in your Account Order History.* Some exclusions apply

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

SALES@HUYETT.COM

129

Suffix Material/Finish

For detailed specifications and tolerances, visi t Huyett.com.

All dimensions in millimeters.

For hardness specifications, see page 131.

**** DIN 6799 only defines rings in carbon steel. Rings in other materials are dimensioned as defined in technical prints, contact sales@huyett.com for details.

2 For plated rings add 0.05 mm to the listed maximum thickness. Maximum ring thickness will be a minimum of 0.005 mm less than the listed groove width (W) minimum.

3 Sharp corner abutment.

Item#

Nominal Size

Shaft Diameter Groove Size Ring Size & Weight Item#

Clearance Supplementary Data Use with ApplicatorDiameter Width Thickness2 Gap Weight Free Outside

DiameterInstalled in Groove

Edge Margin Thrust Load Ring3

Thrust Load Groove (smallest listed Ds)

Allowable Radii &

Chamfers

Max. Loadw/R Max.

or Ch Max.

RPM LimitsStandard Material

Dg Ds Dg Tol. W Tol. T Tol. A Tol. kg/ 1,000

G Ref.

L2 Max.

Y Min.

Pr kN

PgkN

Ds' R/Ch Max.

P'r kNfrom to

DE-008 0.8 1.0 1.4 0.8 -0.040 0.24+0.04/-0.00

0.2 ±0.02 0.58 ±0.040 0.003 DE-008 1.95 2.25 0.4 0.08 0.03 1.2 0.3 0.04 50,000 RRA-708

DE-012 1.2 1.4 2.0 1.2 -0.060 0.34 0.3 ±0.02 1.01 ±0.040 0.009 DE-012 2.90 3.25 0.6 0.12 0.04 1.5 0.4 0.06 47,000 RRA-712

DE-015 1.5 2.0 2.5 1.5 -0.060 0.44 0.4 ±0.02 1.28 ±0.040 0.021 DE-015 3.90 4.25 0.8 0.22 0.07 2.0 0.6 0.11 42,000 RRA-715

DE-019 1.9 2.5 3.0 1.9 -0.060 0.54

+0.05/-0.00

0.5 ±0.02 1.61 ±0.040 0.040 DE-019 4.40 4.80 1.0 0.35 0.10 2.5 0.7 0.17 40,000 RRA-719

DE-023 2.3 3.0 4.0 2.3 -0.060 0.64 0.6 ±0.02 1.94 ±0.040 0.069 DE-023 5.90 6.30 1.0 0.50 0.15 3.0 0.9 0.24 38,000 RRA-723

DE-032 3.2 4.0 5.0 3.2 -0.075 0.64 0.6 ±0.02 2.70 ±0.040 0.088 DE-032 6.90 7.30 1.0 0.65 0.22 4.0 0.9 0.32 35,000 RRA-310

DE-040 4.0 5.0 7.0 4.0 -0.075 0.74 0.7 ±0.02 3.34 ±0.048 0.158 DE-040 8.85 9.30 1.2 0.95 0.25 5.0 1.0 0.47 32,000 RRA-340

DE-050 5.0 6.0 8.0 5.0 -0.075 0.74 0.7 ±0.02 4.11 ±0.048 0.236 DE-050 10.85 11.30 1.2 1.15 0.90 7.0 1.0 0.60 28,000 RRA-605

DE-060 6.0 7.0 9.0 6.0 -0.075 0.74 0.7 ±0.02 5.26 ±0.048 0.255 DE-060 11.80 12.30 1.2 1.35 1.10 8.0 1.1 0.70 25,000 RRA-606

DE-070 7.0 8.0 11.0 7.0 -0.090 0.94 0.9 ±0.02 5.84 ±0.048 0.474 DE-070 13.80 14.30 1.5 1.80 1.25 9.0 1.3 1.00 22,000 RRA-607

DE-080 8.0 9.0 12.0 8.0 -0.09 1.05

+0.08/-0.00

1.00 ±0.03 6.52 ±0.058 0.660 DE-080 15.75 16.3 1.8 2.50 1.42 10.0 1.5 1.25 20,000 RRA-608

DE-090 9.0 10.0 14.0 9.0 -0.09 1.15 1.10 ±0.03 7.63 ±0.058 1.090 DE-090 18.20 18.8 2.0 3.00 1.60 11.0 1.6 1.50 17,000 RRA-609

DE-100 10.0 11.0 15.0 10.0 -0.09 1.25 1.20 ±0.03 8.32 ±0.058 1.250 DE-100 19.70 20.4 2.0 3.50 1.70 12.0 1.8 1.75 15,000 RRA-610

DE-120 12.0 13.0 18.0 12.0 -0.11 1.35 1.30 ±0.03 10.45 ±0.070 1.630 DE-120 22.70 23.4 2.5 4.70 3.10 15.0 1.9 2.30 13,000 RRA-612

DE-150 15.0 16.0 24.0 15.0 -0.11 1.55 1.50 ±0.03 12.61 ±0.070 3.370 DE-150 28.70 29.4 3.0 7.80 7.00 20.0 2.2 3.30 11,000 RRA-615

DE-190 19.0 20.0 31.0 19.0 -0.13 1.80 1.75 ±0.03 15.92 ±0.070 6.420 DE-190 36.50 37.6 3.5 11 10.00 25.0 2.5 3.60 7,600 RRA-619

DE-240 24.0 25.0 38.0 24.0 -0.13 2.05 2.00 ±0.03 21.88 ±0.084 8.550 DE-240 43.50 44.6 4.0 15 13.00 30.0 3.0 4.00 5,500 –

DE-300 30.0 32.0 42.0 30.0 -0.13 2.55 2.50 ±0.03 25.80 ±0.084 13.50 DE-300 51.30 52.6 4.5 23 16.50 36.0 3.5 5.30 4,200 –

DIN 6799**** EXTERNAL – E-CLIP METRIC

Additional attribute data on adjacent page.

DE

### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Y

*The radius “Br” on the load side must not exceed 0.1T

R Max

Ch Max

Br*

Maximum Corner Radius (R Max) & Chamfer (Ch Max)

for Retained Part

*The radius “Br” on the load side must not exceed 0.1T

Edge Margin (Y)

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

STACKED OPTIONS AVAILABLE, SEE HUYETT.COM FOR MORE DETAILS

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

SALES@HUYETT.COM

Also Available AT

DON'T SEE WHAT YOU'RE LOOKING FOR?

Give our Sales Team a call today.

Grease Fittings & Accessories

Machine Keys & Key Stock

Hose Clamps

Engineered Fasteners

Wave & Spring WashersBlind Threaded Inserts

Pins & Wireforms

131For detailed specifications and tolerances, visi t Huyett.com.

Hardness Ranges: JE-clips

Material Size Range ScaleRockwell Hardness

(blank)Carbon Steel,(SAE 1060-1090)

0.8 – 2.53 – 910 – 24

15N30NC

82.5 – 8763 – 7144 – 53

-SSStainless Steel,(PH 15-7 Mo)

0.8 – 2.53 – 910 – 24

15N30NC

82.5 – 86 ♦♦

63 – 69.544 – 51

-BC Beryllium Copper0.8 – 2.53 – 910 – 24

15N30NC

79 – 82 ♦♦

56.5 – 6237 – 43

♦♦ Hardness cannot be checked with any degree of accuracy directly on these rings.

HARDNESS – E-CLIP METRIC

JE

Hardness Ranges: DE-clips

Material Size RangeHardness

HV HRC Lower Scale♦ 15N 30N

(blank)Carbon Steel,(SAE 1060-1090)

0.8 – 1.51.92.3 – 910 – 30

460 – 580460 – 580460 – 580460 – 580

46 – 5446 – 5446 – 5446 – 54

83.5 – 87.5 HR15N♦♦

83.5 – 87.5 HR15N65 – 72 HR30N –

– –

-SSStainless Steel,(PH 15-7 Mo)

0.8 – 1.51.92.3 – 910 – 30

435 – 530435 – 530435 – 530435 – 530

44 – 5144 – 5144 – 5144 – 51

82.5 – 86 HR15N♦♦

82.5 – 86 HR15N63 – 69.5 HR30N –

– –

-SSStainless Steel,(DIN 1.4122 X39CrMo17)

All 470 – 580 47 – 54 – 84 – 87.5 66 – 72

-BC Beryllium Copper

0.8 – 1.51.92.3 – 910 – 30

360 – 415360 – 415360 – 415360 – 415

37 – 4337 – 4337 – 4337 – 43

79 – 82 HR15N♦♦

79 – 82 HR15N56.5 – 62 HR30N –

– –

♦ Where Applicable♦♦ Hardness cannot be checked with any degree of accuracy directly on these rings.

DE

Installation tools available,

see page 256