2
EXPLOSION PROOF GRP SOUNDER/BEACON Audible Signals The EXSB0002 electronic combined sounder beacon series has been approved for use in potentially explosive atmospheres and very harsh environmental conditions. Typical applications are Oil and Gas, On-shore and Offshore, Chemical, locations etc. The unit incorporates a four stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation. In addition, the unit also incorporates a visual warning signal with a choice of two types of light source: either xenon (strobe) with or an LED array with three status type indication options. The units also have the ability to be and can be used as the second ring output indicator for telephones when installed in very noisy environments. The design allows for termination inside the enclosure. The unit can be Explosion Proof Sounder/Beacon > GRP EXSB0002 Series Product overview EXSB0002 Series > Ordering Information IP 66/67 Kg 6.5 -40+70 C APPROVALS and Cable Entry Telephone Initiated SB150-1 Beacon Type Power (Xenon)* Follow the chart (right) to generate your part code. A B C = 1 / 2 NPT D = 3 / 4 NPT O = Other Y = Yes N = No Beacon Type X = Xenon L = LED Duty Label Tag Label** Lens Guard** Y = Yes Y = Yes Y = Yes N = No N = No Power (Xenon)* 02 = 2J 05 = 5J 10 = 10J 15 = 15J 21 = 21J R = Red Y = Amber B = Blue G = Green C = Clear SB150-1 + Lens Colour Lens Colour ** These accessories need to be ordered separately. ** These accessories need to be ordered separately. Approved by ATEX and CQST ATEX: II 2G Exd IIC T4 - T6 Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54 360 0 light output around the vertical axis Volume control Voltage DC 12 ~ 48v AC1 12 ~ 48v AC2 100-240v MODEL CONFIGURATOR (By using the table above, complete this box sequence to select your required sounder beacon). MARINE INDUSTRIAL dB 115 Duty Label Tag Label** Cable Entry Finish Colour Telephone Initiated Voltage Y Lens Guard * Choose either Xenon power or LED power only Power (LED)* 05 = 10 = Power (LED)* Finish Colour RD = Red YW = Yellow BU = Blue BL OR = Other GRP Standard Product Selection

Explosion Proof Sounder/Beacon > GRP EXSB0002 Series · GRP SOUNDER/BEACON Audible Signals The EXSB0002 electronic combined sounder beacon series has been approved for use in potentially

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Explosion Proof Sounder/Beacon > GRP EXSB0002 Series · GRP SOUNDER/BEACON Audible Signals The EXSB0002 electronic combined sounder beacon series has been approved for use in potentially

EXPLOSION PROOFGRP SOUNDER/BEACON

Audible Signals

The EXSB0002 electronic combinedsounder beacon series has beenapproved for use in potentiallyexplosive atmospheres and veryharsh environmental conditions.

Typical applications are Oil and Gas,On-shore and Offshore, Chemical,����������� �����������������locations etc.

The unit incorporates a four stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer.

All tones can be pre-set duringinstallation. In addition, the unit alsoincorporates a visual warning signalwith a choice of two types of lightsource: either xenon (strobe) with����������������������������������or an LED array with three status type indication options.

The units also have the ability to be�������������������������������������and can be used as the second ringoutput indicator for telephones when installed in very noisy environments.

The design allows for terminationinside the enclosure. The unit can be ��������������������

Explosion Proof Sounder/Beacon > GRP EXSB0002 SeriesProduct overview

EXSB0002 Series > Ordering Information

IP 66/67Kg 6.5 -40+70�C

APPROVALS and !"#$"��%&%'*

Cable Entry Telephone Initiated

SB150-1

Beacon Type

Power (Xenon)*

Follow the chart (right) togenerate your part code.

A 3��89

B 3��8;

C = 1/2 NPT

D = 3/4 NPT

O = Other

Y =

Yes

N =

No

Beacon Type

X =

Xenon

L =

LED

Duty Label

Tag Label**

Lens Guard**

Y =

Yes

Y =

Yes

Y =

Yes

N =

No

N =

No

Power (Xenon)*

02 = 2J

05 = 5J

10 = 10J

15 = 15J

21 = 21J

R = Red

Y = Amber

B = Blue

G = Green

C = Clear

SB150-1 +

Lens Colour

Lens Colour

** These accessories need to be ordered separately.

** These accessories need to be ordered separately.

������������ ������

Approved by ATEX and CQST � @�%�'&�"�����%'!'H�K������M

ATEX: II 2G Exd IIC T4 - T6 � K������������%%U���%%WM

Z�����[�8 ��Z�����8[�88�K������M

Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54

3600 light output around the vertical axis

Volume control

]�����������^�����������

Voltage

DC 12 ~ 48v

AC1 12 ~ 48v

AC2 100-240v

#���`�U�������������������������������������������!���������������������������������������������������������� �����j���������������������������������������������������k����������������������

MODEL CONFIGURATOR (By using the table above, complete this box sequence to select your required sounder beacon).

MARINE INDUSTRIALdB 115

DutyLabel

Tag Label**

Cable Entry

Finish Colour

Telephone Initiated

Voltage

YLens

Guard* Choose either Xenon power or LED power only

Power (LED)*

05 =

;^

10 =

[9^

Power (LED)*

Finish Colour

RD = Red

YW = Yellow

BU = Blue

BL�3�W����

OR = Other

GRP

StandardProduct

Selection

Page 2: Explosion Proof Sounder/Beacon > GRP EXSB0002 Series · GRP SOUNDER/BEACON Audible Signals The EXSB0002 electronic combined sounder beacon series has been approved for use in potentially

XENOExplosion Proof Sounder/Beacon > GRP EXSB0002 SeriesGeneral InformationEX CODE: Exd IIC T4 - T6

CERTIFICATION: ATEX, CQSTTYPE:� H��������z']�U����������{�����*�����^������]�|��SOUNDER: 4 Stage alarm with 63 Selectable tones�"^'���U&%#�`� ;j89�^�����U���������SOUND OUTPUT: Up to 115 dB at 1 metre

��z&%�z�%#��$U!&"��$"��!"z"��']�z'#*'*`Yellow (Amber) x 0.51, Red x 0.15, Blue x 0.12, Green x 0.49, Clear x 0

���������������� �������U&'�%Uz` Enclosure: GRP (Glass Reinforced Plastic)� W������`�*��������*������[������z���`�&������������LENS COLOURS: Yellow (Amber), Red, Blue, Green, Clear or Other (specify)ENCLOSURE COLOUR: Red (RAL3001), Yellow (RAL1003)� W����K�Uz;99;M �W�����K�Uz�99�MU�W%'#&�&'��'�U&��'`� -40 to +70���%]%&�`� ���;����^'%��&̀ � 6.5 Kg / 14.3 Ib]%�'#*%"#*`� Length: 413mm / 16.4” No Lens Guard Fitted See outline drawing for other dimensionsINGRESS PROTECTION: %����������

���������������� ������ �"^'��*���z�`� 12-48v Dc, 12-48v Ac or 100-240v Ac&'��%#U&%"#` U��������������8�;2 incorporating rising clamp protectorsCABLE ENTRY: ��k��89 ��8; �[�8�#�& �����#�&����"�����K*�����M!���'#&�!"#*���&%"#`� *�������8;9�U�j�[;99�U�KU��������������������������M

��������������������

&���z�����K*������M 05/50070110229

Telephone Initiated PCB 05/50110105201

Lens Guard 05/50060110109

�89�k�[�;Blind Plug * 05/55100110920

�8;�k�[�;Blind Plug *

05/55100110925

1/2” NPTBlind Plug * 05/55100110821

3/4” NPTBlind Plug * 05/55100110843

�89�*��������*����Exd Blind Plug 05/55100110920

* Ex Stainless Steel Blind Plug (Selectable or Specify)

EXSB0002 Series > ������!�����������^������!������

��������� ������� �������� �������� ����������^�K��kM [9�^�K��kM [;�^�K��kM 89�^�K��kM 8;�^�K��kM

�����

!�"�������#�����$�*������`�;j89^���z']`�;^ %��&��'��������$ *������`�8;9�U�j�[;99�U���z']`�889�U�K��kM

��������� ������� �������� �������� ��������160 mA 320 mA 650 mA [U�K��kM [��U�K��kM

�����

������%��&��'������ ������(�������'�����)��� *���������������9j[�9�$����������������

!�"���)����' 2.5 JK�^M���k

5 JK[9^M���k

10 JK[;^M���k

15 JK89^M���k

21 JK8;^M���k

�**����+�����,��� 67 109 293 395 424

.�3�%��&��'������ .�3�(�������'��)������'�������������)��� *���������������9j[89�$����������������

)��������)��� *���������������9j[89���|�����������������

���������,� Permanently ON (ie Steady)

!�"���)����' ;�^�**����+�����,��� 128