13
Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson , Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier, Jerome Bendotti 29-30/11/12 Small wheel MM, Frascati

Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Embed Size (px)

Citation preview

Page 1: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Experience with 1 x 1m2 and 2 x 1 m2 MM

assemblyCERN/PH/DT

Hans Danielsson , Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier, Jerome Bendotti

29-30/11/12Small wheel MM, Frascati

Page 2: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

ContentDesign

Material

Assembly

Conclusion

29-30/11/12

Page 3: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Principle layout

29-30/11/12

Jörk Wotschack

Page 4: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

1 x 1 m2 sketch (closed)

Stiffening panel

Rohacell

29-30/11/12

5.00

PCB1 PCB2

Jörk Wotschack

Page 5: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Experience with the 1x1m2

Photos

29-30/11/12

2 MM of 1m x 0.5mglued to the Rohacell panel

Stiffening panel

Page 6: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Design 2x1m2

4 Micromegas PCBs

~2 m

~1m

29-30/11/12

Page 7: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Material 2x1m2

Aluminum honeycombAlloy 3003 - cell size 9mm - density 2.6 - dim.

1250x2500 mm T10 mmAlloy 3003 - cell size 9mm - density 2.6 - dim.

1250x2500 mm T15 mm

Aluminum in closeouts, gas distribution and spacer between drift and MM

Glass-fiber reinforced plastics (GFRP)for the skins

Araldite: gluing at room temperature

29-30/11/12

Page 8: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Assembly of a test panel ~0.2m x 2m

Uniform thickness skins (10-20mm)

Calibrated spacers

29-30/11/12

Page 9: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati 29-30/11/12

Page 10: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Validation • Laser device mounted on an

optical bench• It measures the distance

relative to a known reference

29-30/11/12

Page 11: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Results (example)

X

Distance (mm)

29-30/11/12

Page 12: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Conclusion A first attempt has been made to assembly flat panels using a

flat table (flatness 15 mm)

The first results are promising and the next step is to make the first full size 2m x 1m panels (10 mm and 15 mm).The first panel this week and the second beginning of next week. The mounting of the mesh is planned for end of next week.

Next steps: Complete the assembly of a single plane

Evaluate the assembly procedures and tooling

Study how to make a complete “multiplet”

Look at alternative procedures and towards series production

29-30/11/12Small wheel MM, Frascati

Page 13: Experience with 1 x 1m 2 and 2 x 1 m 2 MM assembly CERN/PH/DT Hans Danielsson, Francisco Perez Gomez, Philippe Lenoir, Pierre-Ange Giudici, Francois Garnier,

Small wheel MM, Frascati

Spares (discussion)

29-30/11/12