Slide 1

Expand Media Wall & Podium CaseTraining Videos & Instructions

1Contents:Whats in the box

Expand Media WallStep 1: Setting up the Display WallStep 2: Place the Magnetic Bars onto the frameStep 3: Attach Graphic Panels to the Display WallStep 4: Attach Spotlights to the Display Wall

Expand Podium CaseStep 1: Attach the Counter Top to the Podium CaseStep 2: Attach the Plastic Cover to the Podium CaseStep 3: Attach the Graphic onto the Podium CaseStep 4: Insert the Shelves into the Podium Case

How to Pack Expand Podium Case

Whats in the Box:

Remove the Display Wall from the Podium CaseTake the Display Wall and hold both ends.With a throw action, open out the frame.Pull open the Display Wall until the frame clicks into place.Step 1:Setting up the Display Wall

1

4Step 2:Place the Magnetic Bars onto the Frame

2Remove the Magnetic Bars from the Podium CaseBuild the Display Wall frame by placing the magnetic bars into the magnetised node slots as shown.Ensure all Magnetic Bars are clicked into position (including the two rear bars on the reverse of the frame)

23Step 3:Attach Graphic Panels to Display WallRemove the Graphic Panels from the Podium CaseCarefully unroll each Graphic Panel and hook the top of each panel onto the retaining hooks at the top of the frame.Hang the Graphic Panels, starting at one end and secure each panel along the top, lining up the graphics as you go along.Ensure the Graphics line up with the magnetic strips running vertically down each section of the frame.

3Step 4:Attach Spot Lights to the Display WallRemove the Spot lights from the Podium Case.Place the spotlight clamp near the cross-scissor mechanism at the top of the Display Wall frame.Adjust the clamp until it fits securely into place.3

2

This video clip will demonstrate how to set up the Expand Media Wall, simply click on the image below:

8Set Up the Expand Podium Case:

Step 1:Attach the Counter Top to the Podium Case Open the Podium Case and close the clips on each side of the case.Place the folding Counter Top onto the Podium Case.Unfold the Counter Top and fix it with the clips underneath it.

1

3Step 2:Attach the Plastic Cover onto the Podium CasePlace the Plastic Cover around the the bottom of the Podium Case.Fix the Plastic Cover to the Podium Case with the velcro strip.

21Step 3:Attach the Graphic onto the Podium CaseFrom the back of the case, take the graphic wrap and wrap it around the front and around the back.Pull the Graphic tight around the case ensuring there is no slack.Fix the Graphic to the Podium Case with the 4 velcro strips.

1

3Step 2:Insert the Shelves into the Podium CasePlace the four detachable shelves into the Podium Case.

1This video clip will demonstrate how to set up the Expand Podium Case, simply click on the image below:

14How to Pack Expand Podium Case

Step 1:Step 2:Step 3: