1

We are exclusively offering, subject to prior sale:

1 Complete Weaving Mill from Schengen Europe with 80 looms(Airjet and Rapier looms), Warp preparation (Direct Warpers andSizing Machines), Inspection, Winding, Testing, Knotting etc.

Nearest International airport for inspection:

Prague, Czech Republic or Nuremberg, Germany.

Delivery: Immediately

Newsletter 30/12 - Item 4845 Complete Weaving Mill

2

WARP PREPARATION

Item 4845-01

1 BENNINGER DIRECT WARPER, BEN-DIRECT 1000-1800, year 1998working width 1800 mm, max. speed 1200m/min.,withBenninger V-Creel, type: BEN-SENS-546546 creeling positions + reserve, pitch 290 mm

warp accumulator: model FIL-ACUMULATOR

Item 4845-02

1 SUCKER MUELLER SIZING MACHINE (WETSIZE-technology), year 2002roller width 2000 mm, working width 1800 mm / headstock max., comprising out of:

- 2 Beam Creels ANPf for each 12 beams, 1800 mm width between the flanges and flange diam.1000 mm, side movable (motor driven), with pneumatic brakes,

- 1 Unwinding regulation by LOADCELL measuring rollerfrom 0 – 2700 kN

- 1 WETSIZE size box , each with 2 pre-wetting rollers (max. pressure 70 kN), 1 pre-squeezing roller(10 kN) and 2 main squeezing rollers (50 kN) max 40 kN,

- 2 partitioning rods (motor driven)

- 1 PLEVA size application control and regulation (Telecoll)(System SICAM), consisting of:

- software integrated in the PC software- 1 complete PLEVA size application control device type AS 120

- 1 Cylinder dryer with total 11 drying cylinders, consisting of:Z2/2 version (pre-dryer 2 + 2 cylinders) + ZT7 dyrer with 7 drying cylindersmax. diameter 800 mm, pressure 5 bar, built from previously existing sizing machinewith 3 new electronic temperature controls

- 1 partitioning field, 11 rods

- 1 Mahlo “Textometer” type EMC-9 humidity measuring and control devicefor autom. regulation of machine speed in relation to humidity of the warp aat the exit of the cylinderdryer

3

- 1 electronic Headstock WE-10,3200 mm cylinder width, max. beam pipe width 3000 mm,warping width min. 840 – max. 2600 mmfor flange diam. 450 - 1016 mm, max. beam length 2920 mmmachine speed 10 - 125 m/min, with crwal speed abt. 5 m/min

beaming force 400 – 5000 N, pressure 300 – 6000 N- 1 machine process control LOGOS COMSIZE, 380 V/50Hz,process control of steering and adjustments via monitor:in-built PC with 10” monitor and integrated hard disk,option for tele-diagnosis for maintenance, monitoring or trouble-shooting

- 1 Control Panel400 Volts, 50 cycles

- Size Kitchen1 Rotor cooker RK 121, with stainless steel tank 1.000 ltr.

Item 4845-03

1 KARL MAYER SIZING MACHINE, type Rotal, year 1996/98roller and cyl. width 2000 mm, working width 1800 mmmax. working width at headstock 2100 mm, max. speed 120 m/min., consisting of:

- Beam creel, type RN-12-1800/1000 for 12 beams1800 mm between the flanges, max. 1000 mm flange diam., pneum. Brakes, individually controlled

- Size trough, type 18002 x 2 squeezing rollers, 2 diving roller,automatic temperature regulationautomatic dosing of of sizing material

- waxing device

- Cylinder dyer, 11 drying cylindermodernized in 1996

- Warp tension regulation device, type ULN-1800

- partitioning field

- Beaming Machine / Headstock, type ID 2700/1000Cylinder width 2700 mm, max. working width: 2100 mmMax. Flange diam. 1016 mm

4

- Dinax 1 – computer system:Unwinding tension on the stand on warping rollers, regulation of warp and tractiontension, regulation of temperature, funds of delay in tensive zones, regulation ofsqueezing pressure, residual moisture, machine speed, metering of wrapped quantitypossibility of  placing of 60 setting dates in the memory..

RAPIER WEAVING

Item 4845-04

18 SOMET RAPIER WEAVING LOOMS, Thema Super Excel, year 2001working width 1900 mm, 4 colors, Socos,with electronic Fimtextile Dobby, Type RD 860 - 16 Levers installedspeed up to 570 rpm, weight up to 700 g/sqm, weft density 8-200 picks/cm,each loom equipped with :10 – 12 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers4 Weft Feeders LGL Sirio Progress with creel and weft standwith Formia Nuova batcher, Type TCSE 190

UnderOption

5

Item 4845-05

10 SOMET RAPIER WEAVING LOOMS, Thema Super Excel, year 2003working width 2300 mm, 4 weft colors, Socos,with Fimtextile Dobby, Type RD 860 , 16 Levers installedspeed up to 510 rpm, fabric weight up to 700 g/sqm, weft density 8-200 picks/cm,each loom equipped with :10 – 12 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers4 Weft Feeders LGL Sirio Progress with creel and weft standwith Formia Nuova batcher, Type TCSE 230

Item 4845-06

1 SOMET RAPIER WEAVING LOOM, Thema Super Excel-ALPHA, year 2003Working width 2300 mm, 4 weft colours,with electronic Fimtextile Dobby, Type RD 860 - 16 Levers installed ,speed up to 510 rpm, weight up to 700 g/sqm, weft density 8-200 picks/cmequipped with :10 – 12 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers4 Weft Feeders LGL Sirio Progress with creel and weft standwith Formia Nuova Batcher, Type TCSE 230

6

AIR-JET WEAVING

Item 4845-07

18 SOMET AIRJET WEAVING LOOMS, type Mythos, year 2002,working width 1900 mm, 4 weft colors,with electronic Stäubli Dobby, Type 2871 - 12 levers installedeach loom is equipped with :6 - 8 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers4 Weft Feeders ROY ELF with creel and weft stand with Formia Nuova Batcher, Type TCSE 230

Item 4845-08

12 PICANOL AIRJET WEAVING LOOMS, type Delta X-2P, year 2000,working width 1900 mm, 2 colours, speed up to 800 rpmfabric weight up to 500 g/sqm, PFT systemwith positive Stäubli Cam Motion, type 1610, 8 Levers installedDRC2 quick lock, double whip rollerequipped with :6 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers2 Weft Feeders Picanol 2231B with creel and weft standwith Picanol Batcher, PBM

7

Item 4845-09

21 PICANOL AIRJET WEAVING LOOMS, type PAT-A 190, year 1990,Working width 1900 mm, 2 Colorswith Staubli electronic Dobby, Type 2560 - 12 Levers installedeach loom equipped with :8 - 10 heald frames2 warp beams - 1000 mm flange diameter5000 heddles & droppers2 Weft with creel and weft standwith Formia Batcher

Item 4845-10

1 SOHLER TRAVELLING BLOWER, year 2004complete with railway system, … for the better efficiency in the weaving

Item 4845-11

2 KAESER SPIRAL COMPRESSOR , year 2002Type FS 360capacity 2385 m3/hour, pressure 6 bar, el.motor 250 kW equipped with :Cyclone Condensation Damper, Type ZK 08Autom. Steam Trap, Type Eco-Drain 14Micro filter Combination FFG-708DSplitter of Condensation, Type Aquamat 6 Proclima Suction Tube

with2 Kaeser air dryers, year 2002Type TI 751 KECapacity 75 m³/minEl.motor 9,4 kW

8

Item 4780-11

1 cloth inspection machine, make PLM, Rotron ML30 – 1990 /1999with unwinder built 1999, max roller width 2400 mm

Item 4845-122 Classic inspection tables ELITEX

AUXILIARY EQUIPMENT

Item#102511 WARP TYING MACHINE, STÄUBLI TOPMATIC-TPM 200 PC, year 2001computer controlled, with knotting trolley TPF1-25 cm (Item#10250)

Item#99031 WARP TYING MACHINE, STÄUBLI-TOPMATIC TPM 200 PC, year 1999computer controlled, with knotting trolley ww 200 cm

Item#97281 WARP TYING MACHINE, STÄUBLI-TOPMATIC TPM 200 PC,year 1997,computer controlled, with knotting trolley ww 200 cm, year 2003

Item#80341 WARP TYING MACHINE, USTER TOPMATIC - TPM 200,year 1985with knotting trolley ww 200 cm

Item#4 WARP TYING MACHINES, USTER- UMMmech.

9

Item#4845-131 TABLE for maintenance/repair of warp tying machineswith 2 oil-bathes

Item#103401 REED DRAWING-IN MACHINE, make Titan, year 2002type BE-PCwith automatic control. the machine never damages the reed. This machine can work with normal, pro-filed and double reeds. Technical features: The machine calculates and memorise automatically thedent spacing, manual programming of the number of dents.

Item#4478, 4479, 4479, 6156,4 REED DRAWING-IN MACHINES, make USTER,complete with stand, year 1973

Item#101981 REED DRAWING-IN MACHINE, make USTER, year 2001complete with stand

Item#45811 REED CLEANING MACHINE, make Vollenweider, type BBA

Item#100641 CATCH-SELVEDGE WARPER, make Incentrum (CZ), year 2000with creel, 10/12 position, with el. stop motion

Item#74881 SPOOLER / WINDING MACHINE, year 19834 positions

1 DOUBLING SPOOLER / WINDING MACHINE, year 199912 positions, and creel

YARN TESTING LABORATORY

Item#8322COMPLETE USTER TESTER I, with:SpectrographImperfection IndicatorControl UnitMonitor, Keyboard, PrinterBig lot of Spare Parts

Item#101271 USTER TENSORAPID 3, year 2000withSignal Processor, keyboard, printer and Isoinspect

FABRIC STRENGTH TESTING

Item#94771 TEARING STRENGTH TESTERfor fabrics, electronic

10

MATERIAL HANDLING EQUIPMENT

Item#103211 WARP BEAM AND HARNESS TRUCK, make Genkinger, year 2002type KHR 12 GEV, hydraulic, capacity for beam 1.200 kg and for harness 200 kg

Item# 102561 WARP BEAM LIFTING TRUCK with craddle (Mould), Genkinger, year 2001type KHUM 10/10, hydraulic, capacity 1.000 kg, for beams and batches

Item#100415 TRUCKS (MOULDS) FOR BIG BATCHES, year 2.000

Item# 95381 WARP BEAM LIFTING TRUCK with craddle (Mould), Genkinger, year 1996type KHUM 15/10, hydraulic, capacity 1.500 kg, for beams and batches

Item# 9438, 9439, 9441, 102484 WARP BEAM TROLLIES, year (3) 1996, (1)2001hydraulic, for empty beams, capacity 300 kg

Item# 92701 WARP BEAM LIFTING TRUCK, make Genkinger, year 1994type GWB400, hydraulic, capacity 400 kg, light and slim execution

Item# 8140, 81412 WARP BEAM LIFTING TRUCKS, make Genkinger, year 1985/86type KH 58/15, hydraulic, capacity 1.500 kg

FURTHER MACHINERY FOR THE WARP PREPARATION

Item 4845-14

1 AUTOCONER, make Schlafhorst year 1989 modernized in 2005Type: 138-GKU-X-P, 1 x 50 spindles, splicer,with electronic clearers Zellweger Uster D4- MK15

Item 4845-154 AUTOCONERS, make Schlafhorst year 1969 , 2x 1970,1971 , 3 x 50, 1 x 30 spindles

11

Item 4845-16

3 WARPING MACHINE TOTEXYear 1986 (1 wide, 2 narrow), with creel

Item 4845-17

1 DOUBLING MACHINEYear 1988, Type ZR-16/48

Machines are mill floor and are partlyprepared for shipment, delivery immediate

Additonal pictures and prices upon request.

Kindly advise your interest.

With best regards,

Thomas Lebherz TextilmaschinenTextile Machinery, Trade, Spare Parts, Evaluations and technical ServiceFichtenstr. 16D - 91094 LangensendelbachGermany

new office address:Dammstr. 4GD - 91083 BaiersdorfGermany

Tel.   + 49 - (0)9133 - 769 88 - 64Fax.  + 49 - (0)9133 - 769 88 - 65

email info@xtema.deweb: www.xtema.de

Ust-Id / VAT - No.:  DE 812922187