EXCERPT FROM CATALOG ENT UNIDRIVE S III ECO · EXCERPT FROM CATALOG ENT UNIDRIVE® S III ECO Information on events is available on the KARL STORZ website

EXCERPT FROM CATALOG ENT

UNIDRIVE® S III ECO

Information on events is available on the KARL STORZ websitewww.karlstorz.com

© All pictures, photos and product descriptions are the intellectual property of KARL STORZ & Co. KG.Utilisation and copies by third parties have to be authorized. All rights reserved.

3-15

Important Notes:

It is recommended to check the suitability of the product for the intended procedure prior to use.

Endoscopes and accessories contained in this catalog have been designed in part with the cooperation ofphysicians and are manufactured by the KARL STORZ group. If subcontractors are hired to manufactureindividual components, these are made according to proprietary KARL STORZ plans or drawings.Furthermore, these products are subject to strict quality and control guidelines of the KARL STORZ group.Both contractual and general legal provisions prohibit subcontractors from supplying componentsmanufactured by order of KARL STORZ to competitors.

Any assumptions that competitors’ endoscopes and accessories are acquired from the same suppliers as theKARL STORZ products are not correct. Moreover, endoscopes and instruments provided by competitors arenot manufactured according to the design specifications of KARL STORZ. This means it cannot be assumedthat these endoscopes and accessories – even if they look identical on the outside – are constructed in thesame manner and have been tested according to the same criteria.

Standardized Design and Labeling

KARL STORZ participates both in national and international bodies involved in the development of standardsfor endoscopes and endoscopic accessories. Standardized design and development therefore have long beenimplemented consistently by KARL STORZ. The user can rest assured that all products by the KARL STORZgroup have been designed and constructed not only in compliance with strict internal quality guidelines, butalso with international standards. All data relevant for safe use, such as viewing direction, sizes anddiameters, or notes regarding sterilization of telescopes, are applied to the instruments, have been formulatedaccording to international standards, and therefore provide reliable information.

As we constantly seek to improve and modify our products, we reserve the right to make changes in designthat vary from catalog descriptions.

Original or Counterfeit

KARL STORZ products are name brand articles renowned around the world and represent the state of the artin important areas of healthcare. A large number of “copy cat” products are currently being offered in manymarkets. These products are designed intentionally to resemble KARL STORZ products and use marketingstrategies that at least point out their compatibility with KARL STORZ products. These products are by nomeans genuine products, since genuine KARL STORZ products are sold worldwide exclusively under thename of KARL STORZ, which appears on the packaging and the product. In the absence of such labeling,the product is not from KARL STORZ.

KARL STORZ, therefore, is unable to ensure that such products are actually compatible with genuineKARL STORZ products or can be used with them without injury to the patient.

I

1-15

Table of ContentsUNIDRIVE® S III ECO

MOTOR SYSTEMS 3

UNIDRIVE® S III ECO – Recommended Standard Set Configuration 4

UNIDRIVE® S III ECO – System Components 5

Optional Accessories – for UNIDRIVE® S III ECO 6

SHAVER HANDPIECES 7

DrillCut-X® II Shaver Handpieces – Special Features 8

Handle for DrillCut-X® II Shaver Handpieces 9

Shaver Blades 10

Shaver Blades, straight – for Nasal Sinuses and Skull Base Surgery 11, 14

Shaver Blades, curved – for Nasal Sinuses and Skull Base Surgery 12-13, 15-16

Sinus Burrs, curved – for Nasal Sinuses and Skull Base Surgery 17

Larynx Shaver Blades, distally and proximally curved – for larynx surgery 18

EC MICRO MOTOR II 19

INTRA Drill Handpieces – 80,000 rpm, angled 20

INTRA Drill Handpieces – 40,000 rpm, straight 21

INTRA Drill Handpieces – 40,000 rpm, angled 22

Straight Shaft Burrs – Length 12.5 cm 23


Straight Shaft Burrs – Length 7 cm 25


Burrs and Accessories 27

Accessories for Burrs 28

STAMMBERGER-SACHSE Intranasal Drill 29

Micro Saws, oscillating 30

Micro Sagittal Saw, Osseo Scalpel 31

Micro Compass Saws 32

Dermatomes 33

WIRE TRAYS FOR CLEANING AND STERILIZATION 34

II

1-15

CCleaning Adaptor 8, 10, 11, 12, 13

Connecting Cable 19

DDermatome 33

Diamond Straight Shaft Burr 23, 24, 25, 26, 27

DrillCut-X® II N Shaver Handpiece 8

DrillCut-X® II Shaver Handpiece 8, 11, 12, 13, 14, 15, 16, 17, 18

HHandle 9

High-Performance EC Micro Motor II 19

IINTRA Drill Handpiece 20, 21, 22

LLarynx Shaver Attachment 18

LINDEMANN Burr 27

MMetal Bar 26, 28

Micro Compass Saw 32

Micro Sagittal Saw 31

OOscillating Micro Saw 30

Osseo Scalpel, Micro Saw 31

RRack 23, 24, 25, 26, 28

Rapid Diamond Burr 23, 24

Rapid Diamond Straight Shaft Burr 23, 24, 25, 26

Replacement Blade 33

SSaw Blade 30, 31, 32

Shaver Blade with integratedirrigation for DrillCut-X® Handpiece 11, 12, 13, 14, 15, 16

Sinus Burr with integratedirrigation for DrillCut-X® Handpiece 17

Sinus Shaver with integrated irrigationfor DrillCut-X® Handpiece 17

Size Template 27

Spray Nozzle 6

STAMMBERGER-SACHSE Intranasal Drill 29

Standard Straight Shaft Burr 23, 24, 25, 26, 27

Straight Shaft Burr 26

TTemporal Bone Holder 27

Transverse Tungsten Carbide Straight Shaft Burr 25

Tubing Set 6

Tungsten Carbide Straight Shaft Burr 25, 26

UUNIDRIVE® S III ECO 4

Universal Spray 6

WWire Tray 34

IndexUNIDRIVE® S III ECO

III

1-15

Numerical IndexUNIDRIVE® S III ECO

031131-10 6

20711033 19

20711173 19

252570 22

252571 22

252572 22

252573 20

252574 20

252575 20

252590 21

252591 21

252592 21

253000 33

253001 33

253100 33

253101 33

253200 33

253201 33

253300 33

253301 33

254000 30

254024 30

254025 30

254026 30

254027 30

254028 30

254029 30

254030 30

254031 30

254100 31

254170 31

254171 31

254172 31

254173 31

254174 31

254175 31

254200 31

254235 31

254236 31

254237 31

254300 32

254312 32

254313 32

254314 32

254315 32

254316 32

260000 25

260006 25

260007 25

260008 25

260010 25

260014 25

260018 25

260023 25

260027 25

260031 25

260035 25

260040 25

260045 25

260050 25

260060 25

260070 25

261000 25

261006 25

261007 25

261008 25

261010 25

261014 25

261018 25

261023 25

261027 25

261031 25

261035 25

261040 25

261045 25

261050 25

261060 25

261070 25

261114 25

261123 25

261131 25

261140 25

261150 25

261160 25

262000 25

262006 25

262007 25

262008 25

262010 25

262014 25

262018 25

262023 25

262027 25

262031 25

262035 25

262040 25

262045 25

262050 25

262060 25

262070 25

262200 25

262223 25

262227 25

262231 25

262235 25

262240 25

262245 25

262250 25

262260 25

262270 25

262560 27

262561 27

263050 27

263060 27

263070 27

263518 27

263521 27

263523 27

265050 27

265060 27

265070 27

280030 25, 26, 28

280030 K 26, 28

280033 24, 28

280034 23, 28

280035 28

280040 28

280043 28

280053 6

280053 C 6

280090 27

280120 27

39550 A 34

39551 A 34

39552 A 34

39552 B 34

39554 A 34

40701401 4

40712050 8, 11, 12, 13, 14,15, 16, 17, 18

40712055 8

40712090 9

41200 RA 10, 11, 12, 13

41201 GN 11

41201 KK 11

41201 KKSA 11

41201 KKSB 11

41201 KN 11

41201 KSA 11

41201 LN 11

41201 LSA 11

41201 SN 11

41202 KN 12

41203 GNB 13

41203 GNF 13

41203 KKB 13

41203 KKBA 13

41203 KKF 13

41203 KKFA 13

IV

1-15

41203 KNB 13

41203 KNF 13

41204 KKB 12

41204 KKBA 12

41204 KKF 12

41204 KKFA 12

41250 RA 8, 10

41301 GN 14

41301 KK 14

41301 KKSA 14

41301 KKSB 14

41301 KN 14

41301 KSA 14

41301 LN 14

41301 LSA 14

41301 LX 18

41301 LXA 18

41301 SN 14

41302 KN 15

41303 DT 17

41303 GNB 16

41303 GNF 16

41303 KKB 16

41303 KKBA 16

41303 KKF 16

41303 KKFA 16

41303 KNB 16

41303 KNF 16

41303 WN 17

41304 KKB 15

41304 KKBA 15

41304 KKF 15

41304 KKFA 15

41304 W 17

41305 D 17

41305 DN 17

41305 DW 17

41305 RN 17

649600 24

649600 HK 26

649600 K 26

649600 L 23

649614 24

649614 HK 26

649614 K 26

649614 L 23

649614 Q 26

649618 24

649618 HK 26

649618 K 26

649618 L 23

649623 24

649623 HK 26

649623 K 26

649623 L 23

649623 Q 26

649627 24

649627 HK 26

649627 K 26

649627 L 23

649631 24

649631 HK 26

649631 K 26

649631 L 23

649631 Q 26

649635 24

649635 HK 26

649635 K 26

649635 L 23

649640 24

649640 HK 26

649640 K 26

649640 L 23

649640 Q 26

649645 24

649645 HK 26

649645 K 26

649645 L 23

649650 24

649650 HK 26

649650 K 26

649650 L 23

649650 Q 26

649660 24

649660 HK 26

649660 K 26

649660 L 23

649660 Q 26

649670 24

649670 HK 26

649670 K 26

649670 L 23

649700 24

649700 G 24

649700 GK 26

649700 GL 23

649700 K 26

649700 L 23

649714 24

649714 K 26

649714 L 23

649718 24

649718 K 26

649718 L 23

649723 24

649723 G 24

649723 GK 26

649723 GL 23

649723 K 26

649723 L 23

649727 24

649727 G 24

649727 GK 26

649727 GL 23

649727 K 26

649727 L 23

649731 24

649731 G 24

649731 GK 26

649731 GL 23

649731 K 26

649731 L 23

649735 24

649735 G 24

649735 GK 26

649735 GL 23

649735 K 26

649735 L 23

649740 24

649740 G 24

649740 GK 26

649740 GL 23

649740 K 26

649740 L 23

649745 24

649745 G 24

649745 GK 26

649745 GL 23

649745 K 26

649745 L 23

649750 24

649750 G 24

649750 GK 26

649750 GL 23

649750 K 26

649750 L 23

649760 24

649760 G 24

649760 GK 26

649760 GL 23

649760 K 26

649760 L 23

649770 24

649770 G 24

649770 GK 26

649770 GL 23

649770 K 26

649770 L 23

660000 29

Numerical IndexUNIDRIVE® S III ECO

1

MO

TO

R S

YS

TE

MS

SH

AV

ER

HA

ND

PIE

CE

SE

C M

ICR

O M

OT

OR

IIW

IRE

TR

AY

S

1-15


■ MOTOR SYSTEMS


■ SHAVER HANDPIECES

DrillCut-X® Shaver Handpieces

Shaver Blades

Sinus Burrs

■ EC MICRO MOTOR II

INTRA Drill Handpieces

Burrs

STAMMBERGER-SACHSE Intranasal Drill

Micro Saws

Micro Sagittal Saws, Osseo Scalpels

Micro Compass Saws

Dermatomes

■ WIRE TRAYS FOR CLEANINGAND STERILIZATION

3

MO

TO

R S

YS

TE

MS

Motor SystemsUNIDRIVE® S III ECO

The functional and cost-effective motor system

Special Features:● One unit – six functions

– Shaver– Sinus burr– High-performance EC Micro Motor II– STAMMBERGER-SACHSE intranasal drill– Micro saw– Dermatome

● 2 motor connections● Automated motor recognition● Numeric program display● Microprocess-controlled, continuously

adjustable speed range● Integrated irrigation pump

1-15

ECO 3

4

MO

TO

R S

YS

TE

MS

ECO 4

UNIDRIVE® S III ECORecommended Standard Set Configuration

* mtp medical technical promotion gmbh,Take-Off GewerbePark 46, 78579 Neuhausen ob Eck, Germany

40 7014 20

Specifications:

Power supply

Dimensions w x h x d

Weight

100-240 VAC, 50/60 Hz

300 x 165 x 265 mm

4.7 kg

Certified to

Available languages

IEC 60601-1

numerical codes

40 7014 01 UNIDRIVE® S III ECO, motor control unit with two motor outputsand integrated irrigation pump, power supply100 – 240 VAC, 50/60 Hzincluding:Mains CordTwo-Pedal Footswitch, two-stage, with proportional functionSilicone Tubing Set, for irrigation, sterilizableClip Set, for use with Silicone Tubing Set 20 7116 40Single Use Tubing Set*, sterile, package of 3

1-15

Components/Spare Parts see catalog ENT

5

MO

TO

R S

YS

TE

MS

ECO 5

UNIDRIVE® S III ECOSystem Components

20 7116 40

Silicone Tubing Set

U N I T S I D E

P A T I E N T S I D E

Shaver Blade

41305 DN

Shaver Blade, curved

41201 KN

41302 KN

Sinus Burr

Two-Pedal Footswitch

20 0166 30

DrillCut-X® II Shaver Handpiece

40 7120 5040 7120 90

660000

Intranasal Drill

High-performance EC Micro Motor II

20 7110 3320 7111 73

252573 – 252575

INTRA Drill Handpieces, 80,000 rpm

252570 – 252572, 252590 – 252592

INTRA Drill Handpieces, 40,000 rpm

254000 – 254300

Micro Saws

253000 – 253300

Dermatomes

1-15

6

MO

TO

R S

YS

TE

MS

Optional Accessoriesfor UNIDRIVE® S III ECO

* mtp medical technical promotion gmbh,Take-Off GewerbePark 46, 78579 Neuhausen ob Eck, Germany

031131-10* Tubing Set, for irrigation, for single use, sterile,package of 10

280053 C Spray Nozzle, for the reprocessing of INTRA burr handpieces,for use with Universal Spray 280053 B

280053 Universal Spray, 6x 500 ml bottles – HAZARDOUS GOODS – UN 1950including:Spray Nozzle

ECO 6

1-15

7

SH

AV

ER

HA

ND

PIE

CE

S

Shaver Handpieces

ECO 7

1-15

● Straight suction channel andintegrated irrigationpractically eliminates clogging

● Quick coupling mechanismensures safe work

● Easy hygienic processing● Machine washable

● No obtrusive cable whenworking with DrillCut-X® II

● Particularly ergonomic thanksto variable handle

No clogging Safety/hygiene Convenience/ergonomics

DrillCut-X® II combines the proven properties of DrillCut-X® with new functions:

● Enhanced ergonomics● Variable handle allows connection with various

handpieces and enables more comfortable work● Reduced-weight design

● Greater speed: Oscillation mode for shaverattachments, max. 10,000 rpm;rotation mode for sinus burrs, max. 12,000 rpm

● Proven DrillCut-X® shaver blade portfolios canbe used

8

SH

AV

ER

HA

ND

PIE

CE

S

ECO 8

1-15

DrillCut-X® II Shaver HandpiecesSpecial Features

Powerful motor

Absolutely silent running

Enhanced ergonomics

More lightweight design

Oscillation mode for shaver blades, max. 10,000 rpm

Rotation mode for sinus shavers, max. 12,000 rpm

Straight suction channel and integrated irrigation

Quick coupling mechanism facilitates more rapid exchange of work inserts

Use of proven DrillCut-X® blade portfolios possible

Adaption possibilities for navigated Shaver Tracker 40 8001 22

Allows shaver navigation when used NPU 40 8000 01

Variable handle allows connection with various handpieces andenables more comfortable work

Easy hygienic processing, suitable for use in washer andautoclavable at 134° C

Special Features:

●● ●●

●●

●●

●●

●●

●●

●●

●●

●● ●●

– ●●

– ●●

●●

●●

●●

●●

●●

●●

●●

●●

●●

Dri

llCut

-X®II

4071

2050

Dri

llCut

-X®II

N40

7120

55

40 7120 55 DrillCut-X® II N Shaver Handpiece, with adaptionpossibilities for Shaver Tracker 40 8001 22, for usewith UNIDRIVE® S III ECO/ENT/NEURO

40 7120 50 DrillCut-X® II Shaver Handpiece, for usewith UNIDRIVE® S III ECO/ENT/NEURO

40 7120 50

40 7120 55

41250 RA

41250 RA Cleaning Adaptor, LUER-Lock, for cleaningDrillCut-X®/DrillCut-X® II shaver handpieces

Optional accessory:

●●●●

9

SH

AV

ER

HA

ND

PIE

CE

S

Handlefor DrillCut-X® II Shaver Handpieces

40 7120 90

40 7120 90 Handle, adjustable, for use with DrillCut-X® II 40 7120 50and DrillCut-X® II N 40 7120 55

ECO 9

1-15

For use with DrillCut-X® II 40 7120 50 and DrillCut-X® II N 40 7120 55

Special Features:● Ergonomic design● Ultralight construction● Easy handle control allows individual adjustment● Variable mounting options to DrillCut-X® II

or DrillCut-X® II N shaver handpieces

● Easy fixation via rotary lock● Easy hygienic processing, suitable for use

in washer and autoclavable at 134 °C

10

SH

AV

ER

HA

ND

PIE

CE

S

Shaver Blades

Benefits of shaver blades● Reusable or for single use● Straight working inserts, 360° rotatable

Available in various versions:

Cleaning Adaptor for DrillCut-X® II and Reusable Shaver Blades

Cutting window:● smooth● serrated● double serrated

Sheath:● straight● slightly curved 35°/40°● strongly curved 65°

Diameter:● 2 mm● 3 mm● 4 mm

41204 KKB

41250 RA Cleaning Adaptor, LUER-Lock, forcleaning DrillCut-X®/DrillCut-X® IIshaver handpieces

41200 RA Cleaning Adaptor, LUER-Lock,for cleaning the inner and outerblades of DrillCut-X® accessories

ECO 10

1-15

11

SH

AV

ER

HA

ND

PIE

CE

S

Shaver Blades, straightfor Nasal Sinuses and Skull Base Surgery

For use with DrillCut-X® II

41201 GN

40 7120 50 40 7120 55

serrated cutting edge,diameter 4 mm, color code: blue-red

concave cutting edge, obliquecutting window, diameter 4 mm,color code: blue-black

straight cutting edge,diameter 4 mm,color code: blue-blue

serrated cutting edge,diameter 3 mm,color code: blue-red


Shaver Bladelength 12 cmDetail

40 7120 50 DrillCut-X® II Handpiece

41201 KN

41201 KK *

41201 GN

41201 LN

41201 SN

41201 KSA

double serrated cutting edge,diameter 3 mm,color code: blue-yellow

41201 LSA


concave cutting edge, ovalcutting window, diameter 4 mm,color code: blue-green


41201 KKSB

Shaver Blades, straight, sterilizable

for use with

41201 KKSA

41200 RA Cleaning Adaptor, LUER-Lock, for cleaning theinner and outer blades of DrillCut-X® accessories

Optional Accessory:

ECO 11

1-15

Components/Spare Parts see catalog ENT* Can also be used as navigated Shaver Blade with 40 7120 55 DrillCut-X® II N Handpiece

12

SH

AV

ER

HA

ND

PIE

CE

S

Shaver Blades, curvedfor Nasal Sinuses and Skull Base Surgery


41204 KKB

curved 35°, cutting edge serratedbackwards, diameter 4 mm,color code: blue-red

curved 40°, cutting edge serratedbackwards, double serrated, diameter 4 mm,color code: blue-yellow

41202 KN

curved 40°, cutting edge serratedforwards, double serrated, diameter 4 mm,color code: blue-yellow

41204 KKF

41204 KKB *

curved 40°, cutting edge serratedforwards, double serrated,diameter 3 mm,color code: blue-yellow

41204 KKFA

41204 KKBA

curved 40°, cutting edge serratedbackwards, double serrated,diameter 3 mm,color code: blue-yellow



Shaver Blades, curved 35°/40°, sterilizable

for use with

41200 RA Cleaning Adaptor, LUER-Lock, for cleaning theinner and outer blades of DrillCut-X® accessories

Optional accessory:

ECO 12

1-15

Components/Spare Parts see catalog ENT* Can also be used as navigated Shaver Blade with 40 7120 55 DrillCut-X® II N Handpiece

40 7120 50 40 7120 55

13

SH

AV

ER

HA

ND

PIE

CE

S



41203 KKF

curved 65°, cutting edge serratedforwards, diameter 4 mm,color code: blue-red

curved 65°, cutting edge serratedbackwards, diameter 4 mm,color code: blue-red

41203 KNF


41203 KKF

41203 KNB

curved 65°, cutting edge serratedbackwards, double serrated,diameter 4 mm,color code: blue-yellow

curved 65°, concave cutting edge,oval cutting window, forwardopening, diameter 4 mm, color code: blue-green

curved 65°, concave cutting edge,oval cutting window, backwardopening, diameter 4 mm,color code: blue-green

41203 KKB

41203 KKFA

41203 KKBA

41203 GNF

41203 GNB


curved 65°, cutting edge serratedbackwards, double serrated, diameter 3 mm,color code: blue-yellow



Shaver Blades, curved 65°, sterilizable

for use with

41200 RA Cleaning Adaptor, LUER-Lock, for cleaning the inner andouter blades of DrillCut-X® accessories

Optional accessory:

ECO 13

1-15


40 7120 50

14

SH

AV

ER

HA

ND

PIE

CE

S

ECO 14

1-15

41301 KK

Shaver Blades, straightfor Nasal Sinuses and Skull Base Surgery



straight cutting edge,diameter 4 mm,color code: blue-blue





concave cutting edge, ovalcutting window, diameter 4 mm,color code: blue-green

41301 KN

41301 KK

41301 GN

41301 LN

41301 SN

41301 KSA

41301 KKSA

41301 LSA




41301 KKSB

for use with

Shaver Blades, straight, , sterile, package of 5for single use


40 7120 50

15

SH

AV

ER

HA

ND

PIE

CE

S

ECO 15

1-15



41302 KN

for use withShaver Bladelength 12 cmDetail


curved 35°, cutting edgeserrated backwards,diameter 4 mm,color code: blue-red

curved 40°, cutting edgeserrated backwards, doubleserrated, diameter 4 mm,color code: blue-yellow

curved 40°, cutting edgeserrated forwards, doubleserrated, diameter 4 mm,color code: blue-yellow



Shaver Blades, curved 35°/40°, , sterile, package of 5for single use

41302 KN

41304 KKF

41304 KKB

41304 KKFA

41304 KKBA

40 7120 50

16

SH

AV

ER

HA

ND

PIE

CE

S

ECO 16

1-15


41303 KKB


Shaver Blades, curved 65°, , sterile, package of 5for single use

41303 KNF

41303 KKF

41303 KNB

41303 KKB

41303 KKFA

41303 KKBA

41303 GNF

41303 GNB

curved 65°, cutting edgeserrated forwards,diameter 4 mm,color code: blue-red

curved 65°, cutting edgeserrated backwards,diameter 4 mm,color code: blue-red



curved 65°, cutting edgeconcave forwards,oval cutting window,diameter 4 mm,color code: blue-green

curved 65°, cutting edgeconcave backwards,oval cutting window,diameter 4 mm,color code: blue-green


curved 65°, cutting edgeserrated backwards,double serrated,diameter 3 mm,color code: blue-yellow


for use with


40 7120 50

17

SH

AV

ER

HA

ND

PIE

CE

S

ECO 17

1-15

Sinus Burrs, curvedfor Nasal Sinuses and Skull Base Surgery


41305 RN

Sinus Burrs, curved 70°/55°/40°/15°, , sterile, package of 5for single use

41303 WN

41303 DT *

41304 W

41305 RN

41305 DN

41305 D *



for use with

curved 55°, cylindric,drill diameter 3.6 mm,shaft diameter 4 mm,color code: red-blue

curved 15°, bud drill,drill diameter 4 mm,shaft diameter 4 mm,color code: red-black

curved 15°, diamond head,drill diameter 3 mm,shaft diameter 4 mm,color code: red-yellow

curved 70°, diamond head,drill diameter 3.6 mm,shaft diameter 4 mm,color code: red-yellow

curved 40°, cylindric,drill diameter 3 mm,shaft diameter 4 mm,color code: red-blue

curved 15°, diamond head,drill diameter 5 mm,shaft diameter 4 mm,color code: red-yellow

41305 DW *

curved 40°, diamond head, drill diameter 5 mm,shaft diameter 4 mm,color code: red-yellow

* Can also be used as navigated Shaver Blade with 40 7120 55 DrillCut-X® II N Handpiece

40 7120 50 40 7120 55

18

SH

AV

ER

HA

ND

PIE

CE

S

ECO 18

1-15

Larynx Shaver Blades,distally and proximally curvedfor larynx surgery


Shaver Blades, distally curved 18°, proximally curved 30°, ,sterile, package of 5

for single use

41301 LX

41301 LXA

distally curved 18°,proximally curved 30°,oval cutting edge,oval cutting window,diameter 4 mm,color code: blue-green

distally curved 18°,proximally curved 30°,oval cutting edge,oval cutting window,diameter 3 mm,color code: blue-green


for use with


41301LXA 40 7120 50

19

EC

MIC

RO

MO

TO

R II

ECO 19

1-15

High-Performance EC Micro Motor IIwith INTRA Coupling

● Self-cooling, brushless high-performanceEC micro motor

● Smallest possible dimensions● Autoclavable● Can be processed in a cleaning machine● Detachable connecting cable

● INTRA coupling enables a wide variety ofapplications

● Maximum torque 4 Ncm● Number of revolutions can be continuously

adjusted up to 40,000 rpm● Possible to adjust the number of revolutions to

80,000 rpm with the appropriate handle

20 7110 33

20 7110 33 High-Performance EC Micro Motor II, for use withUNIDRIVE® II/UNIDRIVE® ENT/OMFS/NEURO/ECOand Connecting Cable 20 7110 73, or for use withUNIDRIVE® S III ENT/ECO/NEURO andConnecting Cable 20 7111 73

Special Features:

20 7111 73 Connecting Cable, to connect High-Performance EC MicroMotor II 20 7110 33 to UNIDRIVE® S III ENT/ECO/NEURO

20

EC

MIC

RO

MO

TO

R II

ECO 20

1-15

INTRA Drill Handpieces80,000 rpm, angled

Special Features:● Tool-free closing and opening of the drill● Right/left rotation● Max. rotating speed 80,000 rpm● Detachable irrigation tubes● Lightweight construction

● Low-vibration operation● Low maintenance● Can be processed in a cleaning machine● Safe grip

252573 INTRA Drill Handpiece, angled, length 12.5 cm,transmission 1:2 (80,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs

252574 INTRA Drill Handpiece, angled, length 15 cm,transmission 1:2 (80,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs


252574

252575

252573

High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 19

21

EC

MIC

RO

MO

TO

R II

ECO 21

1-15

INTRA Drill Handpieces40,000 rpm, straight



252590 INTRA Drill Handpiece, straight, length 11 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs



252591

252592

252590


22

EC

MIC

RO

MO

TO

R II

252570 INTRA Drill Handpiece, angled, length 12.5 cm,transmission 1:1 (40,000 rpm), for use with high-performance EC micro motor II and straight shaft burrs



252571

252572

252570

INTRA Drill Handpieces40,000 rpm, angled



ECO 22

1-15


23

EC

MIC

RO

MO

TO

R II

Straight Shaft BurrsLength 12.5 cm

280034 Rack, for 36 straight shaft burrs with a length of 12.5 cm, foldable,sterilizable, size 22 x 17 x 2 cm

12.5 cm

SizeDetail Diameterin mm

Standard Diamond Diamond,coarse

014 1.4

018 1.8

023 2.3

027 2.7

031 3.1

035 3.5

040 4

045 4.5

050 5

060 6

649614 L

649618 L

649623 L

649627 L

649631 L

649635 L

649640 L

649645 L

649650 L

649660 L

649714 L –

–649718 L

649723 L

649727 L

649731 L

649735 L

649740 L

649745 L

649750 L

649760 L

649723 GL

649727 GL

649731 GL

649735 GL

649740 GL

649745 GL

649750 GL

649760 GL

070 7 649670 L 649770 L 649770 GL

sterilizable sterilizable sterilizable

649600 L Standard Straight Shaft Burr, stainless, size 014 – 070,length 12.5 cm, set of 11

649700 GL Rapid Diamond Straight Shaft Burr, stainless, with coarsediamond coating for precise drilling and abrasion withouthand pressure and generating minimal heat, sizes 023 – 070,length 12.5 cm, set of 9,color code: gold

649700 L Diamond Straight Shaft Burr, stainless, size 014 – 070,length 12.5 cm, set of 11

For use with INTRA Drill Handpieces 252592, 252572, 252575

ECO 23

1-15

24

EC

MIC

RO

MO

TO

R II



SizeDetail Diameterin mm Standard Diamond Diamond,

coarse

014 1.4

018 1.8

023 2.3

027 2.7

031 3.1

035 3.5

040 4

045 4.5

050 5

060 6

649614

649618

649623

649627

649631

649635

649640

649645

649650

649660

649714 –

–649718

649723

649727

649731

649735

649740

649745

649750

649760

649723 G

649727 G

649731 G

649735 G

649740 G

649745 G

649750 G

649760 G

070 7 649670 649770 649770 G

649700 Diamond Straight Shaft Burr, stainless, size 014 – 070,length 9.5 cm, set of 11

649700 G Rapid Diamond Straight Shaft Burr, stainless, with coarse diamondcoating for precise drilling and abrasion without hand pressure andgenerating minimal heat, size 023 – 070, length 9.5 cm, set of 9,color code: gold

280033 Rack, for 36 straight shaft burrs with a length of 9.5 cm, foldable,sterilizable, size 22 x 14 x 2 cm

9.5 cm

649600 Standard Straight Shaft Burr, stainless, size 014 – 070,length 9.5 cm, set of 11

ECO 24

1-15

25

EC

MIC

RO

MO

TO

R II

Straight Shaft BurrsLength 7 cm

SizeDetail Diameterin mm Standard Tungsten

Carbide

TransverseTungstenCarbide

014 1.4

018 1.8

023 2.3

027 2.7

031 3.1

035 3.5

040 4

045 4.5

050 5

060 6

261014

261018

261023

261027

261031

261035

261040

261045

261050

261060

261123

–

261131

–

261140

–

261150

261160

Diamond Diamond,coarse

007 0.7 261007 – –

008 0.8 261008 – –

010 1 261010 –

261114

–

–

–

–

006 0.6 261006 – –

262223

262227

262231

262235

262240

262245

262250

262260

070 7

260014

260018

260023

260027

260031

260035

260040

260045

260050

260060

260007

260008

260010

260006

260070 261070 –

262014

262007

262008

262010

262006

262018

262023

262027

262031

262035

262040

262045

262050

262060

262070 262270

7 cm

260000 Standard Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15

261000 Tungsten Carbide Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15

262000 Diamond Straight Shaft Burr, stainless, sizes 006 – 070,length 7 cm, set of 15

262200 Rapid Diamond Straight Shaft Burr, stainless, with coarse diamondcoating for precise drilling and abrasion without hand pressure andgenerating minimal heat, sizes 023 – 070, length 7 cm, set of 9,color code: gold


ECO 25

1-15

280030 Rack, for 36 straight shaft burrs with a length of 7 cm, foldable,sterilizable, size 22 x 11.5 x 2 cm

26

EC

MIC

RO

MO

TO

R II

5.7 cm

649600 K Standard Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11

649600 HK Tungsten Carbide Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11

649700 K Diamond Straight Shaft Burr, stainless, sizes 014 – 070,length 5.7 cm, set of 11

649700 GK Rapid Diamond Straight Shaft Burr, stainless, with coarsediamond coating for precise drilling and abrasion withouthand pressure and generating minimal heat, sizes 023 – 070,length 5.7 cm, set of 9,color code: gold



ECO 26

1-15

SizeDetail Diameterin mm Standard Tungsten

Carbide Diamond Diamond,coarse

014 1.4

018 1.8

023 2.3

027 2.7

031 3.1

035 3.5

040 4

045 4.5

050 5

060 6

649614 K

649618 K

649623 K

649627 K

649631 K

649635 K

649640 K

649645 K

649650 K

649660 K

649714 K

649718 K

649723 K

649727 K

649731 K

649735 K

649740 K

649745 K

649750 K

649760 K

649723 GK

–

–

649727 GK

649731 GK

649735 GK

649740 GK

649745 GK

649750 GK

649760 GK

070 7 649670 K

649614 HK

649618 HK

649623 HK

649627 HK

649631 HK

649635 HK

649640 HK

649645 HK

649650 HK

649660 HK

649670 HK

TransverseTungstenCarbide

649614 Q

–

649623 Q

–

649631 Q

–

649640 Q

–

649650 Q

649660 Q

– 649770 K 649770 GK

280030 Rack, for 36 straight shaft burrs with a length of 7 cm, foldable,sterilizable, size 22 x 11.5 x 2 cm

280030 K Metal Bar, for fixation at Rack 280030, to hold 18 burrs with a lengthof 7 cm and 16 burrs with a length of 5.7 cm, size 16 x 2.5 x 1 cm

27

EC

MIC

RO

MO

TO

R II

ECO 27

1-15

Burrs and Accessories

Straight Shaft Burrs, cylindrical, barrel-shaped, and bud-shaped, length 7 cm

LINDEMANN Burrs, conical, stainless, length 7 cm

Size Diameterin mm

conical

018 1.8

021 2.1

023 2.3

263518

263521

263523

sterilizable

Size Diameterin mm cylindrical barrel-shaped bud-shaped

050 5

060 6

070

040

7

4

265050 –

–

–

262561–

020 2 262560 –

–

263050

263060

263070

–

265060

265070

265050 – 265070

280090 280120

280120 Temporal Bone Holder, bowl-shaped, with3 fixation screws for tensioning the petrosal boneand with evacuation tube for irrigation liquid

280090 Size Template, for drills, stainless steel,sterilizable

28

EC

MIC

RO

MO

TO

R II

ECO 28

1-15

Accessories for Burrs

Please note: The burrs displayed are not included in the rack.

280030 Rack, for 36 straight shaft burrs with a length of 7 cm,foldable, sterilizable, size 22 x 11.5 x 2 cm

280030

280033280034

280040280043

280033 Rack, for 36 straight shaft burrs with a length of 9.5 cm,foldable, sterilizable, size 22 x 14 x 2 cm

280034 Rack, for 36 straight shaft burrs with a length of 12.5 cm,foldable, sterilizable, size 22 x 17 x 2 cm

280040 Rack, flat model, to hold 21 straight shaft burrswith a length of up to 6 cm (6 pcs) and 7 cm (15 pcs),foldable, sterilizable, size 17.5 x 9.5 x 1.2 cm

280043 Rack, flat model, to hold 21 straight shaft burrswith a length of 7 cm (6 pcs) and 9.5 cm (15 pcs),foldable, sterilizable, size 17.5 x 11.5 x 1.2 cm

280035

280030 K Metal Bar, for fixation at Rack 280030, to hold 18 burrswith a length of 7 cm and 16 burrs with a length of 5.7 cm,size 16 x 2.5 x 1 cm

280030 K

280035 Rack, for 54 straight shaft burrs with a length of 5 cm (36 pcs)and 7 cm (18 pcs), foldable, sterilizable, size 22 x 12.5 x 3 cm

29

EC

MIC

RO

MO

TO

R II

STAMMBERGER-SACHSE Intranasal Drill

660074 SK

660000 A/T 660074 SK

Special Features:● Allows atraumatic grinding of the osseous canal

of the optic nerve under endoscopic control● Direct endoscopic view of diamond abradors and

operation area● No fixed coupling to the endoscope makes

independent manipulation possible● The abrador is retracted into the guide sheath

for protection of tissue and endoscope duringintroduction

660000 STAMMBERGER-SACHSE Intranasal Drill, for decompression of theoptic nerve and for fine grinding work in ethmoidal skull base area,for use with EC micro motorincluding:Double Ring Sliding Handle, for moving abrador forwards andbackwards in the guiding sheath, with fixed INTRA drill handpieceGuide Sheath, outer diameter 5 mm, with irrigation stopcockDiamond Abrador, delicate, spherical, diameter 2.5 mmDiamond Abrador, delicate, spherical, diameter 3 mmDiamond Abrador, delicate, conical, from diameter 2.5 mmto diameter 3 mm

ica = Arteria carotis internaaep = Arteria ethmoidalis posterior

on = Nervus opticusx = Tuberculum opticum

z = Anulus zinnii

● Pressure on the sliding handle enablescontrolled advance of the abrador and precisegrinding work under endoscopic control

● The guide sheath remains stationary; only theabradors rotate

● No damage to mucous membrane due tounprotected rotating drive mechanisms

660074 SF

660074 SG


20 7110 33/20 7111 73

ECO 29

1-15


30

EC

MIC

RO

MO

TO

R II

Micro Saws, oscillating

254000

Saw Blades, short shaft, for use with 254000

Saw Blades, long shaft, for use with 254000

254000 Oscillating Micro Saw, inbuilt irrigation tube, recommendedmaximum speed 15,000 rpm corresponds to 15,000 oscillations/min.,without saw blades, with fork wrench

254024 Saw Blade, short shaft, blade thickness 0.3 mm,width of blade 6 mm, working length 11 mm,package of 1, for use with 254000

254025 Same, width of blade 10 mm


254030 Same, blade thickness 0.15 mm, width of blade 6 mm



254031 Same, blade thickness 0.15 mm, width of blade 6 mm

254027 Saw Blade, long shaft, blade thickness 0.3 mm, widthof blade 6 mm, working length 26 mm, package of 1,for use with 254000

20 7110 33/20 7111 73

ECO 30

1-15

High-Performance EC Micro Motor II 20 7110 33 and Connecting Cable 20 7111 73 see page 19Components/Spare Parts see catalog ENT

31

EC

MIC

RO

MO

TO

R II

Micro Sagittal Saw, Osseo Scalpel

254100

254200

Saw Blades, for use with 254100


254170 Saw Blade, blade thickness 0.35 mm, width of blade4 mm, working length 10 mm, package of 12, for usewith Micro Sagittal Saw 254100

254171 Same, width of blade 6 mm, working length 10 mm





254200 Osseo Scalpel, Micro Saw, with axial/sagittal cut, pendulum stroke,especially appropriate for 3-dimensional incision guiding, integratedirrigation tube, recommended maximum speed 20,000 rpm, withoutsaw blades, with fork wrench

254235 Saw Blade, blade thickness 0.35 mm, working length12 mm, package of 12, for use with Osseo Scalpel,Micro Saw 254200

254236 Same, working length 18 mm


254100 Micro Sagittal Saw, integrated irrigation tube, recommendedmaximum speed 20,000 rpm, without saw blades, with fork wrench

20 7110 33/20 7111 73

20 7110 33/20 7111 73

ECO 31

1-15


32

EC

MIC

RO

MO

TO

R II

Micro Compass Saws

254300


254300 Micro Compass Saw, detachable irrigation tube, recommendedmaximum speed 15,000 rpm, without saw blades, with fork wrench

254312 Saw Blade, blade thickness 0.25 mm, workinglength 11 mm, package of 12, for use with 254300





20 7110 33/20 7111 73

ECO 32

1-15


33

EC

MIC

RO

MO

TO

R II


Dermatomes

Special Features:● For removing skin and mucosa ● Dermaplaning for obtaining small pieces of skin

from behind the ear● Can be easily adapted to motor● Optimal setting of the incision depth● Lightweight construction

253000 Dermatome, with INTRA coupling, width of incision12 mm, recommended maximum speed 8000 rpm

253001 Replacement Blade, for Dermatome 253000,width of incision 12 mm, sterile, package of 10







253000

253100

253200

253300

20 7110 33/20 7111 73

ECO 33

1-15

34

WIR

E T

RA

YS

Wire Trays for Cleaning and Sterilization

39550 A Wire Tray, provides safe storage ofaccessories for KARL STORZ paranasalsinus shaver systems during cleaningand sterilizationfor storage of:– Up to 7 shaver attachments– Connecting cable

39554 A Wire Tray, provides safe storage ofaccessories for the KARL STORZ dermatomesystem during cleaning and sterilizationfor storage of:– Up to 2 dermatomes– Connecting cable– EC micro motor with INTRA coupling

39551 A Wire Tray, provides safe storage ofaccessories for the KARL STORZ intranasaldrill system during cleaning and sterilizationfor storage of:– Intranasal drill– Connecting cable– EC micro motor– Up to 10 diamond abradors

39552 A Wire Tray, provides safe storage ofaccessories for KARL STORZ drilling/grindingsystems during cleaning and sterilization,includes tray for small parts, for use withRack 280030, rack not includedfor storage of: – Up to 6 drill handpieces– Connecting cable– EC micro motor– Small parts

39552 B Wire Tray, provides safe storage ofaccessories for KARL STORZ drilling/grindingsystems during cleaning and sterilization,includes tray for small parts, for use withRack 280030, rack includedfor storage of: – Up to 6 drill handpieces– Connecting cable– EC micro motor– Up to 36 drill bits and burrs– Small parts

39550 A

39551 A

39552 B

39554 A

Please note: The instruments displayed are not included in the trays.

Tray for small parts included

ECO 34

1-15

Request per Business Reply Cardor per FAX+49 (0)7461 708 404 or one of KARL STORZ distribution companies– checkmark – provide address on back of card – send –

Catalogs, Catalog excerpts

I prefer: Print Version Digital Version (CD, DVD) (please check)

Address:

Hospital/Office

Contact

Street

Postal Code

Town/City

Tel.

E-mail

REPLY

KARL STORZ & Co. KG

Postfach 230

78503 Tuttlingen/Germany

Postagepaid

Please tear off postcard here!


✂

✂

✂

Laparoscopy in Surgery, Gynecology, Urology

- Pediatric Laparoscopy

- Minilaparoscopy

Gynecology

- Fetoscopy

Urology

Proctology

Arthroscopy, Sports Medicine,Spine Surgery

- RECON – Bone and Joint Reconstruction

Microscopy

Pediatric Surgery

KARL STORZ OR1 NEO®

Telepresence

Hygiene

Neurosurgery

Oral and Maxillofacial Surgery

ENT – Esophagoscopy – Bronchoscopy

- Standard Instruments

- Laryngology

- Otology

- Rhinology and Rhinoplasty

- Sinoscopy, Rhinoscopy, Postrhinoscopy

Plastic Surgery

Anesthesiology and Emergency Medicine

- Video Intubation Systems

Endoscopes and Instruments

for Cardiovascular Surgery

Thorax

Gastroenterology

REPLY

KARL STORZ & Co. KG

Postfach 230

78503 Tuttlingen/Germany

Postagepaid



Request per Business Reply Cardor per FAX+49 (0)7461 708 404 or one of KARL STORZ distribution companies– checkmark – provide address on back of card – send –

✂

✂

✂

Catalogs, Catalog excerpts

I prefer: Print Version Digital Version (CD, DVD) (please check)

Address:

Hospital/Office

Contact

Street

Postal Code

Town/City

Tel.

E-mail

Laparoscopy in Surgery, Gynecology, Urology

- Pediatric Laparoscopy

- Minilaparoscopy

Gynecology

- Fetoscopy

Urology

Proctology

Arthroscopy, Sports Medicine,Spine Surgery

- RECON – Bone and Joint Reconstruction

Microscopy

Pediatric Surgery

KARL STORZ OR1 NEO®

Telepresence

Hygiene

Neurosurgery

Oral and Maxillofacial Surgery

ENT – Esophagoscopy – Bronchoscopy

- Standard Instruments

- Laryngology

- Otology

- Rhinology and Rhinoplasty

- Sinoscopy, Rhinoscopy, Postrhinoscopy

Plastic Surgery

Anesthesiology and Emergency Medicine

- Video Intubation Systems

Endoscopes and Instruments

for Cardiovascular Surgery

Thorax

Gastroenterology

© All pictures, photos and product descriptions are the intellectual property of KARL STORZ GmbH & Co. KG.Utilisation and copies by third parties have to be authorized. All rights reserved.

3-15

Important Notes:

It is recommended to check the suitability of the product for the intended procedure prior to use.

Endoscopes and accessories contained in this catalog have been designed in part with the cooperation ofphysicians and are manufactured by the KARL STORZ group. If subcontractors are hired to manufactureindividual components, these are made according to proprietary KARL STORZ plans or drawings.Furthermore, these products are subject to strict quality and control guidelines of the KARL STORZ group.Both contractual and general legal provisions prohibit subcontractors from supplying componentsmanufactured by order of KARL STORZ to competitors.

Any assumptions that competitors’ endoscopes and accessories are acquired from the same suppliers as theKARL STORZ products are not correct. Moreover, endoscopes and instruments provided by competitors arenot manufactured according to the design specifications of KARL STORZ. This means it cannot be assumedthat these endoscopes and accessories – even if they look identical on the outside – are constructed in thesame manner and have been tested according to the same criteria.

Standardized Design and Labeling

KARL STORZ participates both in national and international bodies involved in the development of standardsfor endoscopes and endoscopic accessories. Standardized design and development therefore have long beenimplemented consistently by KARL STORZ. The user can rest assured that all products by the KARL STORZgroup have been designed and constructed not only in compliance with strict internal quality guidelines, butalso with international standards. All data relevant for safe use, such as viewing direction, sizes anddiameters, or notes regarding sterilization of telescopes, are applied to the instruments, have been formulatedaccording to international standards, and therefore provide reliable information.

As we constantly seek to improve and modify our products, we reserve the right to make changes in designthat vary from catalog descriptions.

Original or Counterfeit

KARL STORZ products are name brand articles renowned around the world and represent the state of the artin important areas of healthcare. A large number of “copy cat” products are currently being offered in manymarkets. These products are designed intentionally to resemble KARL STORZ products and use marketingstrategies that at least point out their compatibility with KARL STORZ products. These products are by nomeans genuine products, since genuine KARL STORZ products are sold worldwide exclusively under thename of KARL STORZ, which appears on the packaging and the product. In the absence of such labeling,the product is not from KARL STORZ.

KARL STORZ, therefore, is unable to ensure that such products are actually compatible with genuineKARL STORZ products or can be used with them without injury to the patient.

Information on events is available on the KARL STORZ websitewww.karlstorz.com

Documents

EXCERPT FROM CATALOG ENT UNIDRIVE S III ECO · EXCERPT FROM CATALOG ENT UNIDRIVE® S III ECO Information on events is available on the KARL STORZ website