ExcavatorFilling InstrumentComposite SyringeAmalgam ProductMatrix Retainer / SeparatorContact ProtectorApplicatorRubber Dam ProductEndodontic ProductFiber Cutter

38404444454546475058

3737

39393838

-CDR Type-2-

*Material / Si (Color Ring)

*The edge along with the circle at a tip remove softened dentin and make cavity preparation efficiently.

Str. #1 / Cvd. #1

Str. #2 / Cvd. #2

Str. #3 / Cvd. #3

Description #1 #2 #3 #4L

Str. Cavity preparation for wall and floor.

01605 01606 01607 01608

Cvd.Used for undercut area, narrow rim of an opening and at the cavity angle.

01705 01706 01707 01708

-Round Tip Type-2-

*Material / Si (Color Ring)

1.1m

m1.

5mm

2.0m

m

*Excavator which pursued minimal intervention.

Str. #4L / Cvd. #4L

2.0mm

1.3mm

0.9mm

#1No. 01714

#2No. 01715

#3No. 01716

0.7m

m

Excavator

Efficient Sanitary Complete removal

Point1 Point2 Point3

300°300° wide edge allows efficiently removal of cavity dentine.

Slope working part design allows easy clean of particles.

Carious dentin which is contiguous to dental enamel can be removed without breaking the dental enamel.

Cavity

Cavity#1・#2 #1・#2 #3

*The minimum spoon is effective for micro cavity preparation.*The long shank is designed so it doesn't obstruct the view under microscope.

*The reason why "spoon excavator" doesn't have the risk of excessive excavation.

Dentin

Dentin

Dental enamel

Dental enamel BreakagePear

Shaped

ø2.0mm

ø2.5mm

ø3.5mm

ø3.0mm

ø3.5mm ø3.5mm

ø2.0mm

ø2.0mm

ø2.5mm

#1No. 03001

#6No. 03006

#7ANo. 03015

#13No. 03013

SSW #2No. 03102

#14No. 03014

#4No. 03004

#14ANo. 03016

#13ANo. 03017

#9No. 03009

#7No. 03007

*For efficient filling to proximal, thickness at the tip is thin.

AnteriorNo. 03231

PosteriorNo. 03232

No. 03241

Plastic Filling Instrument

Cement Filling Instrument

Proximal Filling Instrument

-DLC-*Diamond Like Carbon Coating

#1Filling

No. 03381

#2Filling / Carving

No. 03382

#3Filling / Carving

(Mesial and distal of posterior teeth)No. 03383

#4Filling / Carving

(Labial region of anterior teeth)No. 03384

#5Carving

(Pit-and -fissure / Occlusal surface)No. 03385

#6Filling

(Occlusal surface)

No. 03386

*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.

ø1.5mm

ø1.0mm

ø3.5mm

ø2.5mm

ø3.5mm

ø2.2mm

*Thickness / 0.2mm (#2, #3, #4)

#CP3No. 03333

*Teflon Coating

#CP4No. 03334

*Teflon Coating

DLC #2ANo. 23425

*Diamond Like Carbon Coating

DLC #2BNo. 23426

*Diamond Like Carbon Coating

*Thickness / 0.2mm

Composite Filling Instrument Tip (Replaceable Type)

P-A (ø8mm)No. 10201

P-F (ø6mm)No. 10205

P-B (ø8mm)No. 10202

P-C (ø6mm)No. 10203

*Remove all joint parts and replaceable tip before sterilization and disinfection.*For more replaceable type products see P. 201.

-Handle-

-Tip (3 ea.)-

Composite Filling Instrument

41414040

-TMDU 2 (Tokyo Medical Dental University)-

*Thickness / 0.2mm (#1)0.1mm (#2)

*Material / Si (Color Ring)

*Diamond Like Carbon Coating*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.

ø0.9mm

ø3.2mm

ø1.6mm

#1 BlueFilling / Carving

No. 03341

#2 GreenFilling / Flowable regin applying

No. 03342

#3 RedFilling / Carving

No. 03343

#4 SilverRemoval of surplus resin

(Proximal area / Margin area)No. 03344

-TMDU 3 (Tokyo Medical Dental University)-

ø1.5mm

ø0.9mm

ø2.5mm

*Thickness / 0.1mm (#1 & #3 Left)0.2mm (#3 Right)

*Diamond Like Carbon Coating*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.

*Sharp knife edge cuts burr on interproximal areas.

#1Red

[ Contact surface of tooth ]Excellenty thin tip allows

approach narrow proximal area.

[ Anterior lavial side ]Inside curved part is for cervical

area and outside one is for incisal area.

#4 White

[Margin]Remove with scraping

surplus resin after cured.

#3Green

[ Molar occlusal side / Anterior lingual side ]

For Class I cavity, fill cavity wall and cavity floor without bubble.

[ Molar occlusal side ]Adjust shape after filling.Efficient for lingual side of upper central incisal too.

#5Yellow

[Molar occlusal side]Make pit part.

[Molar occlusal side]Form occlusal ridge.

#2Blue

[ Molar occlusal side ]For pit and fissure.

[ Premolar lavial side ]Curved neck part allows it easy to approach over lip.

#4Silver

[Margins]Remove with scraping surplus

resin after cured.

#2Green

[ Cavity Floor /Molar occlusal side ]

Fill flowable resin into tiny cavity.Form occlusal ridge.

[ Molar occlusal side /Anterior lingial side ]

Fill big pit.

#3Red

[ Far end of last molar ]Excellent angle for

approaching,filling distal end of the last molar.

[Anterior lavial side]Inside curved part is for cervical

area and outside one is for incisal area.

#1Blue

[Molar occlusal side / Anterior lingual side]

Fill cavity wall and cavity floor without bubble.

[ Molar and Carrying resin ]Fill molar part and adjust shape

of rejin,carry rejin.

43434242

#1 RedFilling / Carving

No. 03391

#2 BlueFilling / Carving

No. 03392

#3 GreenFilling (Class 1 cavity) / Carving (Occlusal surface)

No. 03393

#4 WhiteRemoval of surplus resin

(Proximal area / Margin area)No. 03394

#5 YellowCarving

(Occlusal surface)No. 03395

*Forming ridge and occulusal fossa.

*Effective design for filling of class 1 cavity wall and line angle.

*Sharp knife edge cuts burr on interproximal areas. *Cavity floor

Composite Filling Instrument

No. Description

13255 Main Body L

13256 Main Body S

13188 Nozzle & Plug L (100 ea.)

13190 Nozzle & Plug S (100 ea.)

13193 Nozzle & Plug L (500 ea.)

13194 Nozzle & Plug S (500 ea.)

L : Main body L / Nozzle & Plug L (100 ea.)S : Main body S / Nozzle & Plug S (100 ea.)

*Material / PPS (Black part)

Nozzle & Plug S(Plug / Green)

Nozzle & Plug L(Plug / Blue)

Main Body

LNo. 13251

SNo. 13252

No. Description

13171 Main Body

13172 Band (10 ea.)

No. 13170

Thickness / 30μm

SNo. 05002

Round HandleNo. 07100

Contents Contents

Individual Parts

Individual Parts

No. 13175 Anterior

Posterior

*Thickness / 50μm*Not sold separately.

*Protect adjacent tooth during the cavity cutting.

ElliotPosterior

No. 13162

IvoryAnterior

No. 13161

Anterior (10 ea.) / Posterior (10 ea.)

*It is used after letting froth pass in a hole.

- How to use -*Stainless Steel Contents

45454444

Main body / Band (10 ea.)

Crown part

Dental neck part

1) The both ends of a matrix retainer band are united and made a ring.

2) The matrix retainer band which became a ring is inserted in a matrix retainer and a fixed screw is tightened.

3) Apply to the target tooth and tightened adjustable screw.

- How to use -

Fixed Screw

Upper Right / Lower Left

Upper Left / Lower Right

Adjustable Screw

Adapter

PlugNozzle- How to use -

*Resin of necessary quantity is filled in a nozzle, and a plug is inserted in and it is used by equipping into Syringe.

Composite Syringe Type-2

Amalgam Carver

Matrix Retainer Set

Amalgam Burnisher

Separator

Contact Protector Set

No. Description Shape

08526 #26 Upper molars A

08501 #201 Upper molars A

08556 #56 Lower molars A

08502 #202 Lower molars B

08506 #206 Premolars A

08507 #207 Premolars B

08527 #26A Premolars B

No. Description Shape

08510 #210 Anterior teeth B

08511 #211 Anterior teeth B

08560 #DR Lower first deciduous molar right A

08561 #DL Lower first deciduous molar left A

08512 #12A Lower molars / Wisdom teeth B

08513 #13A Lower molars / Wisdom teeth B

#210 #211 #DR #DL

#206 #207 #12A #13A

#201 #26 #202 #56

#26A

*#12A / 13A → Serrated jaws and offset jaw height provides stability to partially erupted teeth.*#26 / #26A → Used in pedodontic. In that case, #26 is for deciduous molars and #26A is for deciduous anterior teeth.

BoardNo. 08258

No. 25015

ø1.5mm

1.1mm

ø2.5mm

2.5mm

ø1.5mm

1.1mm

ø2.5mm

2.5mm

F-B #3No. 03203

F-B #4No. 03204

F-B #4No. 03214

F-B #3No. 03213 -Clamp shape-

Fit on gingival margin. (Grasp part curves downward)

Gum is not pressed.(Grasp part is flat)

A

B

Size / W132 x D87mm

*Stainless Steel -Round-

-Octagonal-

- How to use -

47474646

Lining Applicator

Ball-Pointed Applicator

Rubber Dam Clamp

No. 08591

*Material / Si (Green part)

AdultNo. 08101

ChildNo. 08102

Size / W98 x D90mm

Size / W89 x D70mm

Rubber Dum Clamp / Board / Rubber Dam Punch Type-2 / Clamp Forceps YS / Young Frame for Adult / Sterilization Case

Sterilization CaseNo. 24052

YSNo. 08121

BrewerNo. 08120

Hole diameter / ø0.75mmø1.00mmø1.50mmø1.70mmø2.00mm

No. 08111

*Size / 165mm

*Size / 175mm

*Size / 165mm

49494848

Contents

Individual Parts

Rubber Dam Punch Type-2

Clamp Forceps

Young Frame

Rubber Dam Kit Type-2

*Storage capacity / 8 reamers and files*Size / W74 x D10 x H52 mm *Material / POM*Sterilizable with liquid sterilizing solutions.*Product does not include reamers and files.

No. Description

08431 Yellow

08432 Orange

08433 Pink

08434 Blue

08435 Green

*Can be arranged "Reamer Guard" by reamer or file type and size.*Cover will not allow the reamers and files to fall out.*An Engine reamer can be stored with "Bur Guard".

-Holding length-

Up to 12mm

Up to 31mm

*Able to connect each "Reamer Guards".*The cover becomes a stand. *Has a built in gauge to measure stop positions during root canal treatments.

No. 08415

*It is ideal for managing reamers and files for every patients.*Can be autoclave or ultrasonic cleaning with reamers and files.*Lid does not allow reamers and files to fall out.

*Has a build in ruler.

*Storage capacity / 11 reamers and files*Holding length / From 21 to 31mm*Size / W48 x D43 x H47mm*Material / PP (Green part)*Product does not include reamers and files.

*Size / ø45 x H36mm*Product does not include reamers and files.

No. 08423

*During the treatment, can be cleaned reamers and files by paper.

*Set 2 sheets to stabilize reamers for cleaning.

Paper No. 08422(300 sheets)

Contents

Individual Parts

51515050

Reamer Guard Reamer Stand-Safety-

Main Body / Paper (100 sheets)

Clean Pot

Str.No. 13615

Cvd.No. 13617

*Material / PFA (Main body)PP (Trigger)

ø11mm Tapered

ø10mm

*The inside of a root canal is dried by an air current with suction in a root canal.

*Because of drying by an air current, it also becomes saving of a paper point.

Contents

Distal

No. 13150

No. 08064

*Excellent for use in hard-to-reach posterior teeth.*Applicable for root canal treatment of both mesial and distal.

Mesial

No. 21155

4cmNo. 21151

No. 21154 Front side Back side

for Root Canal Therapy #16No. 01316

3ml. Type-2No. 13228

53535252

Main Body / Joint (ø10mm & ø11mm Tapered) / Nozzle (5 ea.) / Cleaning Wire

AdapterNo. 13614

*In case the inside diameter of evacuation tube is 16mm, this adaptor is needed for the use of Evacuation Tip Universal.

*Material / PTFE

NozzleNo. 13616(5 ea.)

Size / 200mm

*Tip outside diameter / ø0.6mm

Cleaning Brush S (ø4mm) No. 13651(12 ea.)

Endodontic Aspirator Type-2

Individual Parts

Sold Separately

Broach Holder

File Holder Type-2

ScaleFinger Ruler

Endodontic Gauge

Cleaning WireNo. 90341

Irrigating Syringe

Explorer

Str.Anterior

No. 18910

*For removal of reamers and files deeper within rood canal.*The tip has a groove to securely hold residual reamer or file.

*Assures firm grip of residual reamer or paper point in root canal.

Cvd.Posterior

No. 18911

MiniNo. 24017

No. 08063

*Size / W91 x D42 x H13mm*Material / Si (Green part)*Product does not include main and accessory points.

*Can be autoclave with points.

0.7m

m

#1No. 11311

#2No. 11312

#3No. 11113

with LockNo. 11316

BeachNo. 11117

Size / 160mm

Size / 160mm

Size / 160mm

Size / 170mm

Size / 161mm

Sleeve (2 ea.) / Gauge (2 ea.)Contents

*Suitable for root canal treatment, accurate examination before placing an implant, checking of calculus quantity and its area.

No. 21157

Sleeve Gauge(1mm by 1mm with hold line every 5mm) - How to use -

*Size / W38 x D48 x H8.5mm (Sleeve)W33 x D45mm (Gauge)

*Material / Si (Sleeve)

X-Ray Gauge

55555454

Gutta Percha Case

Root Forceps Endodontic Tweezers

Stieglitz Root Forceps

#1No. 08026

#2No. 08027

#3No. 08028

*Combination of heat cutter and plugger makes cutting and compacting of extra gutta percha easily.*Heat cutter is designed with a metal heat retention bulb for longer working time.

Heat retention bulb

#2No. 08022

#1No. 08021

#3No. 08023

#1No. 08031

#2No. 08035

ø1.0mm

ø1.0mm

#2Upper

No. 08012

S

L

#0.25SNo. 08032

#0.4SNo. 08033

*Since an elastic metal is used, the root canal which is curving can also be pressurized in accordance with a root wall.

#0.4SNo. 08002

#0.4LNo. 08005

#0.6SNo. 08003

#0.25SNo. 08001

#0.25LNo. 08004

#1 Anterior

No. 08011

*Superelastic Alloy

ø0.25mmø0.4mmø0.6mm

ø0.4mm

ø0.25mmø0.4mm

#0.25SNo. 23551

#0.4SNo. 23552

23m

m

28mm

ø1.3mm

ø1.0mm ø0.7mm

ø1.5mm

ø1.0mm ø0.5mm

ø2.0mm

ø1.3mm

*Heat Cutter*Plugger

Tapered / 3%

Tapered / 3%

Tapered / 3%

-Ultra-

-with Heat Cutter-

P-A (ø8mm)No. 10201

P-F (ø6mm)No. 10205

P-B (ø8mm)No. 10202

P-C (ø6mm)No. 10203

*Remove all joint parts and replaceable tip before sterilization and disinfection.*For more replaceable type products see P. 201.

-Handle-

-Tip (3 ea.)-

-Round-

-Octagonal-

#1-2No. 08030

#3Lower

No. 08013

23mm

57575656

Heat Cutter

Spreader Tip (Replaceable Type)

Spreader Root Canal Plugger

No. 08071

*Easy to cut the fiber post length for your need. *There is no fluff of a cutting plane. *Particulates are not generated.

*Cut fiber can be entered in to the holder.

*Easy to cut the fiber thanks to the gauge on the holder.

(Measurement from 5mm to 15mm)

*Size / 130mm*Material / TPX (Holder)

Main body / Holder / Sleeve Guide (3 ea.)

Problems from using Steal Round Bur, Cutting Disc, Diamond Disc1) Fiber become fluffy.2) Melt the surface because of the friction heat between fiber post and bur.3) Remain the color of bur or disc on the section.

Contents

Fiber Cutter Type2 Nipper Steal Round Bur Cutting Disc Cutting Disc with Diamond

5858

Fiber Cutter Type2