All Equipment. All For Hire. All Areas.MINIEXCAVATOR

1300 ALLCOTTCall Australia Wide www.allcotthire.com.au

Machine model 8018 CTSA Sprocket idler centres mm (ft-in) 1127 (3-8)B U ndercarriage overall length mm (ft-in) 1484 (5-10)C Kingpost clearance mm (ft-in) 394 (1-3½)D Tailswing radius mm (ft-in) 1080 (3-6½)E Overall width of superstructure mm (ft-in) 996 (3-3¼)F Height over cab mm (ft-in) 2318 (7-7) G Ground clearance mm (ft-in) 158 (0-6)H Track gauge mm (ft-in) 750 to 1110 (2-5½ to 3-7¾)I Width over tracks (retracted) mm (ft-in) 980 (3-2½)

Width over tracks (extended) mm (ft-in) 1340 (4-5)J Transport length – Standard dipper mm (ft-in) 3523 (11-6¾)J Transport length – Long dipper mm (ft-in) 3467 (11-4½)J Transport length – Gravemaster dipper mm (ft-in) 3265 (10-8½)K Transport height with FOGS guard mm (ft-in) 2340 (7-8¼)K Transport height without FOGS guard mm (ft-in) 2318 (7-7¼)L Track height mm (ft-in) 366 (1-2)

ENGINEModel 403D-11 Tier IIIFuel DieselCooling Water cooledGross power ISO 14396 kW (hp) @ 2200 rpm 14.7 (19.7)Nett power kW (hp) @ 2200 rpm 14.2 (19)Gross torque ISO 14396 Nm (lbf ft) @ 1600 rpm 66.8 (49.27)Nett torque Nm (lbf ft) @ 1600 rpm 64.2 (47.35)Displacement cc / litres 1131 / 1.131Gradeability degrees 35Starter motor kW (hp) 1.1 (1.48)Battery volt / Ah 12v / 60Alternator amps 40

UNDERCARRIAGENo of bottom rollers 3Track width mm (in) 230 (9)Ground bearing pressure kg/cm² (lb/in²) 0.33 (4.69)Ground clearance mm (in) 158 (6)Track tensioning GreaseTravel speed – low kph (mph) 2.2 (1.37)Travel speed – high kph (mph) 3.9 (2.42)Tractive effort (nominal) kN (lbf) 13.8 (3102)

DOZER BLADEMax height (above ground) mm (ft-in) 168 (0-6½)D ig depth (below ground) mm (ft-in) 454 (1-6)Approach angle degrees 17Width mm (ft-in) 1000 (3-3)Width (extended) mm (ft-in) 1380 (4-6¼)Height mm (ft-in) 248 (0-9¾)Reach in front of tracks mm (ft-in) 404 (1-4)

OPERATOR ENVIRONMENTExternal Internal

Cab/canopy height with FOGS guard mm (ft-in) 2318 (7-7) 2269 (7-5)Cab/canopy height no FOGS guard mm (ft-in) 2304 (7-6½) 2269 (7-5)Cab/canopy length mm (ft-in) 1171 (3-11) 1073 (3-6)Cab/canopy width mm (ft-in) 974 (3-2) 888 (2-11)D istance from seat base to roof mm (ft-in) 1223 (4-0)D oor aperture width mm (ft-in) 624 (2-0½)

SERVICE CAPACITIESFuel tank litres (U S gal) 23.5 (6.2)Engine coolant litres (U S gal) 5 (1.3)Engine oil litres (U S gal) 4 (1.0)Hydraulic system litres (U S gal) 28 (7.4)Hydraulic tank litres (U S gal) 25 (6.6)

STATIC DIMENSIONS

A

B

E D

H

I

J

GLC

F K

All Equipment. All For Hire. All Areas.

All Equipment. All For Hire. All Areas.

MACHINE WEIGHTSOperating weight* kg (lb) 1822 (4016)With canopy kg (lb) -80 (-176)With FOGS guard kg (lb) +25 (+55)With long dipper kg (lb) +2 (+41⁄2)With Gravemaster dipper kg (lb) +7 (+151⁄2)*Operating weight to ISO 6016 including cab, rubber tracks, standard dipper, 300mm (12in) bucket, full tanks and a 75kg (165lb) operator.

EEC NOISE LEVELS (95/27/EC DYNAMIC)Cab external sound dB (Lw A) 93Cab internal sound dB (LpA) 77

STANDARD EQUIPMENT ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, 12v power socket, lifting points, rubber tracks, 2 speed tracking, hydraulically extending undercarriage, ISO servo controls, static seat, boom worklight, double acting auxiliary circuit, triple section gear pump, extendable dozer blade, 1161mm (3ft-10in) dipper, bushed kingpost, steel bushes in dipper nose and bucket link, tilting cab.

OPTIONAL EQUIPMENT ROPS & TOPS certified fully glazed cab with steel lower door (includes heater, interior light, door holdback latch with internal/external release, gas strut assisted front screen), suspension seat, dual pattern controls ( ISO/SAE change-over), cab/canopy mounted worklights, 1261mm (4ft-2in) long dipper, 1500mm (4ft-11in) Gravemaster dipper*, dipper pipework, hand held tool circuit, variable displacement pump, engine fan guard kit, FOPS roof guard, mirror, track pedals, toolkit, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, travel alarm, immobiliser, yellow roof moulding, 9 digging buckets (160mm to 760mm (6in to 30in)), 2 ditching/grading buckets (900mm & 1000mm (35in and 39in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter, rotating or strobe beacon, toolkit and greasegun, heavy-duty track tension, JCB impact protection front screen.

WORKING RANGE

Boom length mm (ft-in) 1807 (5-11¼) 1807 (5-11¼) 1807 (5-11¼)Dipper length mm (ft-in) 1161 (3-10) 1261 (4-2) 1500 (4-11)A Max digging reach mm (ft-in) 4121 (13-6½) 4222 (13-10¼) 4449 (14-7¼)B Max digging reach on ground mm (ft-in) 4073 (13-4¼) 4170 (13-8¼) 4401 (14-5¼)C Max digging depth – dozer up mm (ft-in) 2343 (7-8¼) 2442 (8-0¼) 2682 (8-9½)

Max digging depth – dozer down mm (ft-in) 2736 (8-11¾) 2836 (9-3¾) 3075 (10-1)D Max digging height mm (ft-in) 3555 (11-8) 3620 (11-10½) 3774 (12-4½)E Max dump height mm (ft-in) 2628 (8-7½) 2692 (8-10) 2846 (9-4)F Max height to dipper nose pivot pin mm (ft-in) 3054 (10-0¼) 3118 (10-2¾) 3272 (10-8¾)G Max vertical wallcut depth mm (ft-in) 2053 (6-8¾) 2148 (7-0½) 2376 (7-9½)H Min. front swing radius (no offset) mm (ft-in) 1638 (5-4¼) 1654 (5-5¼) 1693 (5-6¾)

Min. front swing radius (fully offset) mm (ft-in) 1427 (4-8¼) 1442 (4-8¾) 1477 (4-10¼)I Boom swing left degrees 55 55 55J Boom swing right degrees 75 75 75

Bucket rotation degrees 198 198 198D ipper rotation degrees 121 121 121Bucket tearout kN (lbf) 16.2 (3642) 16.2 (3642) 13.7 (3079)D ipper tearout kN (lbf) 9.2 (2068) 8.3 (1866) 7.1 (1596)Slew speed rpm 8.1 8.1 8.1

0246810121416

0

0 2

4

6

8

10

12

14

16

-2

-4

-6

-8

-10

1

2

3

4

-1

-2

-3123

FeetMetres4 -1

-2

5

F

C

E

G

D

BA

H

IJ