EXB12049 Doc mesure - Legrand · PDF fileEXB12049_Doc mesure.indd 1 06/07/12 14:41. Measurement, metering and display, the first step towards sustainable savings ... Legrand has developed

  • Upload
    buidat

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

  • MEASUREMENT, METERING & DISPLAY VIAeCOMMUNICATION

    sustainablesavingsthat can be viewed directly on the internet

    EXB12049_Doc mesure.indd 1 06/07/12 14:41

  • Measurement, metering and display,the first step towards sustainable savings

    Measurement is the basis of all diagnostics.By monitoring your consumption, you can makesavings of 8 to 12%. And by combining this withaction plans, you can optimise performance andcommit to a sustainable development process.Energy efficiency requirements in commercialbuildings will encourage the use of measurementby load type, in each consumer unit, withconsumption displayed as close as possible tothe user (heating, cooling, hot water production,lighting, cooking, power sockets).

    Legrand solutionsIn addition to energy meters, measurement controlunits and the new DX3 or DPX3 protection devicesincorporating measurement functions, Legrand hasdeveloped an ecommunication infrastructure fordisplaying information on reactive power consumption,voltage disturbance, harmonic distortion, etc. according tothe type of building (low consumption/high environmentalquality, whether in use or being refurbished).

    Potential savings for a set of electrically heatedoffices 600 m2

    Installation of 1 web server, 3 electricity meters and1 measurement control unit, combined with corrective actions

    ANNUAL SAVING

    800 ANNUAL SAVING

    Payback 24 months max.(1)

    CO2 equivalent of all polluting gases(CO2, methane, carbon monoxide,fluorinated gases, etc.)

    1300 kg CO2 equivalent

    HEATING/AIR CONDITIONINGElectricity meter at head of row

    ANY APPLICATIONMeasurement control unit(1) at the supplyend of the installation with checking of theelectrical parameters

    (1) Meters and control units are protected upstream by 0.5 A fuses

    LIGHTINGElectricity meter at head of row

    (1) Prices and data for information only valid in France.

    DISPLAY IN

    CENTRALISED

    Measurement, metering & display via ecommunication

    EXB12049_Doc mesure.indd 2 06/07/12 14:41

  • 1

    splay,savings

    DITIONINGf row

    (1) at the supplywith checking of the

    ream by 0.5 A fuses

    f row

    Measurement via ecommunication onPC screen

    Measurement via ecommunication on fixed and mobilescreensDisplay of the measurement on a screen connected to theIP network with web server, displaying data frommeasurement control units and EMDX3 electricity meters.

    Directly on the internet andon tablet computers equippedwith a web browser (iPad,Archos, etc.) or smartphones(iPhone, etc.)

    DISPLAY AS CLOSE AS POSSIBLE TO USERSDISPLAY IN THE CONSUMER UNIT

    CENTRALISED DISPLAY FOR OPERATING MANAGERS

    Remote display, for a set of buildings,of the measurement information fromvarious main LV distribution boards (MB)or secondary boards (SB). One IP addressper consumer unit. Used forthe real-time display,measurement andrecording of consumption.

    EXB12049_Doc mesure.indd 1 06/07/12 14:41

  • 2

    Measurement, metering and display via ecommunication :Each consumer unit has an IP address

    Measurement on each direct outgoing line

    Build an architecturefor measurement viae communication

    Main LV distribution board

    Secondary board SecondaryRS 485/IPconverterCat.No 0 046 88

    DIRECT OUTGOINGLINE FROM 80 A

    EMDX3 modularmeasurement control unit

    DIRECT OUTGOINGLINE FROM 80 A

    DIRECT OUTGOINGLINE FROM 80 A

    IP PROTOCOL - ETHERNRS 485 FIELDBUS

    RS 485 - Fieldbus Pulse link IP protocol - Ethernet bus

    Electronic circuit breaker withmeasurement unitFor measuring consumption, voltage,current, active power, etc.Operates with electronic interfaceCat.No 4 210 75

    EMDX3 Access and Premiummeasurement control unitwith module for temperature measurement,event log, remote control, measurement ofharmonics, etc.

    Essential measurementsNew buildings

    RS 485/IP converterCat.No 0 046 88

    OUTGOING LINE TO AIRCONDITIONING/HEATING

    OUTGOING LINE TO LIGHTING

    OUTGOING LINETO POWER SOCKETS

    OTHER

    RS 485 FIELDBUS

    RS 485 electricity metersFor recharged metering, use MID certified meters

    Extension of mea(positive energyexisting building

    PULSE

    Pulse energy metFor recharged

    EXB12049_Doc mesure.indd 2 06/07/12 14:41

  • 3

    Secondary board

    IP PROTOCOL - ETHERNET BUS

    DIRECT DISPLAY ON SCREEN(WITH SOFTWARE OR WEB SERVER, see page 15)

    SB

    MBFor example ateach outgoing line,display andmeasurementof harmonics,consumption history

    SB

    Consumption historyper previous days,months and years

    ol - Ethernet bus

    485/IP converter046 88

    GOING LINE TO AIRCONDITIONING/HEATING

    GOING LINE TO LIGHTING

    GOING LINEWER SOCKETS

    ified meters

    Extension of measurements,(positive energy buildings),existing buildings

    EMDX3 modularconcentrator

    RS 485/IPconverterCat.No 0 046 88

    RS 485PULSE

    Pulse energy metersFor recharged metering, use MID certified meters

    Each application isdetailed (heating/lighting/measurement can beextended to water and gasmeters).For each one, theconsumption only ismeasured by a pulseenergy meter connected,in groups of 7 meters, to aconcentrator

    For example lowconsumption/high

    environmental qualitybuilding.

    Detailed measurementsfor each application

    EXB12049_Doc mesure.indd 3 06/07/12 14:41

  • 4

    Build an architecturefor measurement viae communication

    RS 485 FIELDBUS

    RS 485 - Fieldbus IP protocol - Ethernet bus

    Essential measurements

    OUTGOING LINE TOAIR CONDITIONING

    OUTGOING LINE TOLIGHTING

    OUTGOING LINETO POWER SOCKETS

    RS 485/IP converterCat.No 0 046 88

    IP PROTOCOLETHERNET BUS

    RS 485 electricity metersFor recharged metering, use MID certified meters

    OTHER

    Measurement, metering & display via ecommunication :Each consumer unit has an IP address

    BOILER ROOMCONSUMER UNITOUTGOING LINE

    GLOBAL

    IP DISPL

    iPad, Arctablet cowith a w

    Web server

    Enables consumption to bedisplayed on all types of screenequipped with a web browser(PC), Smartphone (iPhone, etc.),TV, tablet computer equipped witha web browser (iPad, Archos, etc.)

    Software dedicated tomeasurementFor displaying measurement ormetering on a dedicated PC

    Main LV distribution board

    EXB12049_Doc mesure.indd 4 06/07/12 14:41

  • 5

    GLOBAL IP DISPLAY DIRECTLY ON THE INTERNET WITH THE WEB SERVER

    ecommunication

    ecommunication

    The consumer unit's consumption per applicationis displayed, via the web server, on a screenconnected to the network displaying, as required,all the parameters of the installation:consumption, energy, voltage, etc.

    Measurements from electricitymeters or measurement controlunits (consumption, energy,voltage, etc.) are displayed, viathe dedicated software, on a PCconnected to the company network.

    On PC

    On PC

    On Smartphone* On tablet*On TV*

    IP DISPLAY WITH LEGRAND SOFTWARE

    iPad, Archos, etc. typetablet computer equippedwith a web browser

    onsumption to beed on all types of screen

    equipped with a web browser(PC), Smartphone (iPhone, etc.),

    er equipped withad, Archos, etc.)

    ated to

    or displaying measurement orering on a dedicated PC

    * Direct display on screens equipped with a web browser,using the web server

    EXB12049_Doc mesure.indd 5 06/07/12 14:41

  • 6

    Configure a system for measurement viae communication in 3 steps

    A simple, intuitive application for complete display ofthe consumption of a building

    EXAMPLE OF CONFIGURATION OF THE ELECTRICAL INFRASTRUCTURE OF A BUILDINGBY CREATING CONSUMER UNITS, CIRCUITS AND AREAS

    EXAMPLEOR ELECTRICITY

    2 solutions for displaying the consumption of buildings:Installation of the Measurement application on adedicated PC, or direct connection to a web server.Then, directly configure (in 3 steps) the display of theconsumption of the buildings

    To use remote display with the web server:- If you are on a company network, ask you IT department for a fixed IP address- If you have a box, ask your service provider for a fixed address

    Example of screen for configuring a consumer unit. Repeat the sameoperations from the initial screen to create circuits and areas.

    PC Smartphone*

    * Direct display on screens equipped with a web browser,using the web server

    Tablet* TV*

    EXAMPLE

    4 Display of the saved items

    Set the paramet

    Setting the

    2

    3

    14

    Examples of creating consumer units

    Examples of creating areas

    1

    2

    3

    3

    3

    Add an item to the building:

    Consumer units Circuits (and predefined applications) Areas

    Name the items added:Consumer units

    Circuits (applications)

    Areas

    Main LV distribution board

    Heating

    Lighting

    Building A

    Building B - 2nd floor

    Secondary board

    Save

    Add

    Save

    Save

    SB - Bldg B - 2nd floor - Heating

    EXB12049_Doc mesure.indd 6 06/07/12 14:41

  • 7

    ement via

    A BUILDING

    EXAMPLE OF CONFIGURATION OF DEVICES (MEASUREMENT CONTROL UNITOR ELECTRICITY METER) AND AREAS OF A BUILDING

    Smartphone*

    browser,

    TV*

    EXAMPLE OF CONFIGURATION OF THE GATEWAY* (IP ADDRESS) OF A CONSUMER UNIT

    1

    2

    3

    4

    1

    5

    Enter the IP addressof the consumer unit gateway

    Each consumer unit has its own IP address (via the gateway)

    Set the parameters of an area

    Name the gateway

    Select the assigned consumer unit

    Add a gateway

    10.31.100.93

    Gateway 1

    Main LV distribution bo