Professional Engineer

Summary Report

Name

PROFESSIONAL ENGINEER

Summary Statement

Competency ElementA brief summary of how you have applied the elementParagraph in the career episode(s) where the element is addressed

PE1 KNOWLEDGE BASE

PE1.1 Knowledge of science and engineering fundamentals Interest and expertise in IC design and using the Cadence tool.

C.E.1.2

Classification of the development process Develop a user friendly and faster self service

Analyzing the callers demands and service requests

CE 2.5

CE 2.9,CE 2.17

Gather required information to understanding the Process flow of the application. Understanding the requirements of SCADA

CE 3.1

PE1.2 In-depth technical competence in at least one engineering discipline Design a 4 Bit Ripple Carry Adder using NORA logic which is one of the prominent low power design technique for digital circuits

C.E.1.2, C.E.1.4

Identification of interfacing problems (hardware and software)CE 2.12

Evaluating the Remote AC Traction power system

CE 3.2

PE1.3 Techniques and resources Implemented 4 bit Ripple Carry Adder with a low power design technique

C.E. 1.4, C.E. 1.5

Whole process of design of an IVRS into two sections namely

1. Hardware section

2. Software section

C.E. 2.5

The three parts Host system, Communication Interfaces and Railway Traction Remote Terminal Unit (RTU).

C.E. 3.9

PE1.4 General Knowledge To overcome disadvantages implemented faster and smaller logic gatesC.E. 1.2, C.E. 1.4

Procedures in respect of health, quality, safetyCE 2.10

Knowledge of testing and Testing and involved in various activities

C.E. 3.7, C.E. 3.3

PE2 ENGINEERING ABILITY

PE2.1 Ability to undertake problem identification, formulation, and solution By careful observation and by guidelines of the project supervisor I reduced one transistor from each latch.

C.E. 1.11

Encountered technical difficulties in software support.

Necessary measures for the proper functioning of micro controller . CE 2.12

CE 2.11

Validating the process control

Simulating and analyzing the results of the design.

Analytical in the formulation and solutions of problems

CE 3.5

CE 3.6

PE2.2 Understanding of social, cultural, global, and environmental responsibilities and the need to employ principles of sustainable development Low power circuits reduce the cost of the chip and attract customer to use the technology which plays a vital role in social and economical environment.C.E. 1.8

Knowledge about the various departments, mode of working .

Establishment of coordination between the different teams CE 2.17

CE 2.15

Understand the basic RTU operations and also verify the specifications and its reliable performance.

CE 3.6

PE2.3 Ability to utilise a systems approach to complex problems and to design and operational performance Design each block very carefully in terms of low power.C.E. 1.8 ,C.E. 1.9

Technical factors which can lead to failure

Limitations of IVRS

Resources responsible to support the IVRS CE 2.8, CE 2.9

CE 2.9

CE 2.10

Focus was to discover all the problems identified which undergoing the phases in testing.C.E. 3.7

PE2.4 Proficiency in engineering design Design a 4 Bit Ripple Carry

C.E 1.6

Connection between the telephone line and ring detector

IVRS in internet applications

Development of a visual basic program for transmission of dataCE 2.7

CE 2.9

CE 2.7

Evaluation of the product and the process through a control plan.

Identification of various critical parameters that exist in the Engineering work as a team, plan, conduct good meetings, manage details, gather useful data, analyze the data, communicate the results and implementing changes.

CE 3.15

PE2.5 Ability to conduct an engineering project The assigned project was successfully implemented by me.

C.E.1.12

Usage of audio amplifier as a buffer

CE 2.7, CE 2.8

In depth analysis of RTU

Developing a product with good quality values

CE 3.9

CE 3.10

PE2.6 Understanding of the business environment Done product planning ,implementation distributing work business environmentC.E.1.11,C.E.1.12

Organizational goals, Quality and Customer satisfaction

Benefits of product planning to the final customer

CE 2.11

CE 2.14

Achieved the organizational goals for Quality product

Benefits of product planning CE 3.8

PE3 PROFESSIONAL ATTRIBUTES

PE3.1 Ability to communicate effectively, with the engineering team and with the community at large Discussed with my project supervisor about process variation, time to market, fabricate the chip C.E.1.11

Assigned a specific job and responsibilities

CE 2.15,CE 2.14

Effectively implement various suggestions and ideas of team members for the successful completion of the project

Receive feedback from the team members for further improvements in the way the project was being carried out.

CE 3.11

CE 3.15

PE3.2 Ability to manage information and documentation Had written the whole project report C.E.1.12

Utilization of my writing skills

Synchronization between the two involved teams.

Supporting the team members in integration CE 2.15

CE 2.12

CE 2.8

Identified, documented and communicated changes of Control plans

CE 3.13

PE3.3 Capacity for creativity and innovation Circuit diagram based on low power techniqueC.E. 1.4. ,C.E. 1.6

Programming of micro controller

Best features in both of communication and software these streams.

Introduction of IVRS in mobile systems

.

CE 2.11

CE 2.3

CE 2.2

Enhance quality planning according to the requirement.

Achievement of organizational goals through initiatives taken.

CE 3.7

CE3.3

PE3.4 Understanding of professional and ethical responsibilities, and commitment to them Discussion with project guide and implementing the project successfully C.E. 1.10

Responsibilities in telecommunications

The policy of our organization

Efficient design of Interactive voice response system,

CE 2.1

CE 2.3

CE 2.4

Ability to implement improvements in the discharge of professional duties

Organizational benefiting through technical accomplishment

CE 3.8

CE 3.4

PE3.5 Ability to function effectively as an individual and in multidisciplinary and multicultural teams, as a team leader or manager as well as an effective team member Ability to meet and solve issues

C.E.1.9 ,C.E. 1.16

Coordination of work between the development team and quality assurance team

My duties in development process

CE 2.4

CE 2.7

Ability to coordinate with the other members of the team for the professional execution of the project

Ability to utilize the qualities of the team members for the success of the project.

CE 3.11

CE 3.12

PE3.6 Capacity for lifelong learning and professional development Knowledge of MOSFET, MOS transistors etc

C.E. 1.6, C.E. 1.5

Meeting the demands of its customers

Applications of IVRS in other areas CE 2.17

CE 2.2

Involved in the analysis of determining various errors of a unitCE 3.4

PE3.7 Professional Attitudes Can handle the project alone and dedicatedly

C.E. 1.11, C.E. 1.12

Infrastructure for rapid growth in the organization

Forming a multidiscipline team

Limitations of IVRS.

CE 2.1

CE 2.4

CE 2.9

Ability to work in teams.

Able to support team goals with the organizational goals.

Process flow knowledge involved in the manufacturing process of automotive components.

CE 3.5

CE 3.14

CE 3.5