Embed Size (px)
Citation preview
SPECIALIZED ECU REPAIR
www.ecudoctors.com Page 1 of 1
Your ECU has had it’s Immobilizer function removed. Now you will need to bypass and jump the EWS module in order to start the car.
1. Disconnect the negative side of the battery.2. Find the EWS module behind the glovebox, and disconnect it. (You won’t need the EWS anymore.)3. Use our jumper cable, and connect it fromPin #1 to Pin #3 on the EWS harness.4. Connect the ECU to the car.5. Reconnect the negative side of the battery.6. Start the car.
1-800-328-1425WWW.ECUDOCTORS.COM
941 NE 48TH ST.OAKLAND PARK, FL 33334
EWS 2 Bypass Procedurefor BMWs E34 (’95-3/97), E36 (’96-’99), E38 (’95-9/96*)
Steps to find the EWS module
Connect Jumper Cablefrom Pin 1 to Pin 3
