27
Construction of my Front Cover By Evie Theodore

Evidence of editing and constructing front cover images

Embed Size (px)

Citation preview

Page 1: Evidence of editing and constructing front cover images

Construction of my Front Cover

By Evie Theodore

Page 2: Evidence of editing and constructing front cover images

Creating my background

Page 3: Evidence of editing and constructing front cover images

This is a graffiti wall I took a picture of. I like the colours and the design but the image of the silver surfer is a distraction, so I decided to take it out.

Page 4: Evidence of editing and constructing front cover images

Step 1•I used the lasso tool to select the image of the silver surfer.

Page 5: Evidence of editing and constructing front cover images

Step 2I right clicked the image and selected the fill option then clicked content aware (See Figure 1)

Figure 1

Page 6: Evidence of editing and constructing front cover images

Outcome•I successfully removed the silver surfer image and am now left with the paint backdrop to use as a background to establish the scene on my front cover for a long shot.

Page 7: Evidence of editing and constructing front cover images

Removing the original background

Page 8: Evidence of editing and constructing front cover images

Step 1•Using the magic wand tool ( Figure 2) I selected the background of the image•When I was finished selecting it I deleted it. Then I was able to place the model image over my background

Figure 2

Page 9: Evidence of editing and constructing front cover images

Outcome

Now I was able to create a new image using my new background and my model from the other image to create the long shot. These two images work well together as the wall creates an urban feel and the model’s pose seems as though they are leaning against the wall.

Page 10: Evidence of editing and constructing front cover images

Correcting Flash Mistakes

Page 11: Evidence of editing and constructing front cover images

Step 1•Using the eye dropper tool I selected the same colour of black as the models clothing to make sure the correction of the lighter area the flash effected was not noticeable.•Then I created a new layer and using the paint brush tool I painted over the effected flash area.

Figure 3 Figure 2

Page 12: Evidence of editing and constructing front cover images

Step 2I then decreased the opacity (See Figure 4) so that the colour of the paint was not too dark or noticeable against the model’s costume.Using the Blur tool( See Figure 5) I made sure that the paint carefully blended against the models costume

Figure 4

Figure 5

Page 13: Evidence of editing and constructing front cover images

Outcome

The flash has been successfully removed from the image and the colours have been blended together so it is not visible that there has been a correction made.

Page 14: Evidence of editing and constructing front cover images

Creating my Masthead

Page 15: Evidence of editing and constructing front cover images

Step 1•I typed in my Masthead’s name in black •I then clicked the effects tool (See Figure 6) and began to change the Colour Overlay settings (See Figure 7). I tried to make the colour as close to silver as possible to give the illusion that the Masthead is made from destroyed metal.•I added a Bevel and Emboss to make it seem bigger and more 3D.• Also a black Stroke, Outer Glow and an Inner Glow. to make it stand out against the background. (See Figure 7)Figure 6

Figure 7

Page 16: Evidence of editing and constructing front cover images

Outcome

Now my Masthead appears to give the illusion of faded or damaged metal through the meaning of the name and the visual erosion and colour of the text. It also stands out better against the background colours.

Page 17: Evidence of editing and constructing front cover images

Editing my background

Page 18: Evidence of editing and constructing front cover images

Step 1

•I clicked on the fill/adjustment layer button (Figure 9)•Then I selected the Curves button (Figure 8) to change where the light was directed on the background. It lightened the wall and made it brighter.

Figure 8

Figure 9

Page 19: Evidence of editing and constructing front cover images

Outcome

•The lightening and brightening of the wall has helped the construction of my front cover as the background was quite dark before and it clashed slightly with the models dark costume.

Page 20: Evidence of editing and constructing front cover images

Removing Distractions

Page 21: Evidence of editing and constructing front cover images

Step 1•The grass growing against the wall is a distraction so I decided I should get rid of it to make the image neater. Using the same previous process I used the lasso tool to select the sections I wanted to get rid of.•Then I clicked the fill option (see Figure 1)and selected content aware so that the space will not be empty, instead it will look similar to the rest of the background

Figure 1

Page 22: Evidence of editing and constructing front cover images

OutcomeThe distracting grass has been successfully removed and replaced by an extended version of the wall. Now the audience will be able to see the models shoes more easily now and not become distracted.

Page 23: Evidence of editing and constructing front cover images

Creating Lipstick

Page 24: Evidence of editing and constructing front cover images

Before

Page 25: Evidence of editing and constructing front cover images

Step 1

•I created a new layer and named it ‘Lips’•Then I selected the shade of red that I wanted to use for the lipstick.•I then went over the models lips and painted them

Page 26: Evidence of editing and constructing front cover images

Step 2 •I then reduced the opacity on the layer (Figure 4)•Next I went to the layer adjustments and experimented with the colours on the hue and saturation option (Figure 10)

Figure 4 Figure 10

Page 27: Evidence of editing and constructing front cover images

Outcome

Now the models red lipstick is able to bring some colour to the costume without being too bright or clashing with the prop of the electric guitar.