EVI 3 2017 - · PDF fileALL COILS FEATURE † Heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material † Class H 200°C wire according to IEC 60317-13

ALL COILS FEATURE• Heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material• Class H 200°C wire according to IEC 60317-13• Built-in magnetic yoke made by low carbon iron• Encapsulation with high quality custom designed glass filled nylon or thermoplastic polyester

The use of other materials is possible upon special agreements.

All coils are rated to Class F and IP65 (with connector and suitable seals) and for continuous service.

These coils are designed in accordance to EN 60204.1 and VDE 0580 and are in conformity

with 2014/35/UE directive.

The EVI 3E coil is designed to fit solenoid tubes with Ø=14mm.

The EVI 3P coil is designed to fit solenoid tubes with Ø=16mm.

The EVI 3D coil is designed to fit solenoid tubes with Ø=19mm (3/4 inch).

Types, power ratings and more technical specifications are described in the following pages.

These coils can be manufactured with different powers or characteristics upon customer request.

The flying leads version can be equipped with different connectors upon request.

EVI 3 Coil System

The EVI3 coil system by AMISCO includes a wide range of electrical coils suitable for cartridge valves for mobile hydraulic and pneumatic applications.

The EVI3 coils are designed to fit most of the current applications and offer a choice of electrical terminations like DIN 43650 (EN 175301-803 ISO 4400), Kostal M27x1, AMP Junior, Flying Leads, AMP Superseal, Metripack, Deutsch and ISO 15170.

1

COIL BORING14 = 14 mm

16 = 16 mm

19 = 19 mm

SUPPLY CURRENTA = Alternating current (A.C.)

D = Direct current (D.C.)

R = Rectified alternating current (R.A.C.)

C O I L C O D I N G S P E C I F I C A T I O N S

CODE: X X 9 9 Y K 5 5 5 4 4 **

TYPE3E = EVI 3E

3P = EVI 3P

3D = EVI 3D

ELECTRICAL CONNECTIONA = AMP Junior

C = Flying leads

D = DIN 43650 A

K - Kostal M27x1

T = Deutsch DT04 integrated

S = AMP Superseal integrated

M = Metripack 2 integrated

I = ISO 15170

NOMINAL VOLTAGEExample: 012 = 12V

024 = 24V

WINDING CODE See tables in next pages

MARKINGAM = Standard coil + Amisco logo

ZN = Standard coil (only voltage)

... = Customized marking

2

Alternative possibilities for

CUSTOMER LOGO

EVI 3E/14

Force stroke curve at –10% nominal voltage and

stabilized duty temperature. This graph has to be

intended as an indication. In fact it can change

according to the specific applications.

Coil suitable for hydraulic applications. It can be supplied

with different power consumptions according to specific

requirements. Available with different types of electric

connections. (see side page).

TECHNICAL DATA

Standard power consumption: 21W

Force: see the graph

Duty Cycle: 100% ED (continuous)

Standard operating voltages: 12-24 VDC

Other voltages on request.

Operating voltage range:

max: 10% over the nominal voltage.

min : according to the specific application.

Operating temperature range: -40°C ÷ +50°C

Coil insulation: Class F

GENERAL CONSTRUCTION:

According to EN 60204.1 and DIN VDE 0580

MATERIALS: Wire class H200°C, Encapsulant: glass filled

PA 6-6 or glass filled PBT.

Other materials on request.

ELECTRICAL CONNECTIONS:

Degree of protection: IP 54 (EN 60529 )

With connector and suitable seals it can reach:

DIN 43650 connector IP65

KOSTAL connector ( M27x1 ) IP67

Flying leads IP67

AMP Junior IP65

The specifications and drawings contained herein are believed to be correct and are given in good faith, however no liability is accepted therefore.

Manufacturer reserves the right to modify said specifications and drawings without notice for thecnical or commercial reasons.

STROKE (mm)

FORC

E (N

)

EVI 3E/14

NOMINAL VOLTAGE POWER WINDING CODE

12VDC 21W 01

24VDC 21W 01

0,2 0,5 1,5 2 2,5 3

40

30

20

10

0

1

60

70

50

3

Amisco S.p.A. Tel. el. +39 02.9900181Via Piaggio 70 Fax +39+39 02.9900186020037, Paderno Dugnano (MI) – Italytaly wwwww.amisco.it

UE DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product:

Cooiill type: EVI 3E14Nominal voltage: up to 240V

Nominal PoPower: up to 21W[DC] or 28VA[AC]Ambienent tempt erature: -40 ÷ +50 °C

Tolerance rangenge on nominal values: ±10%

Type of connection and other informatiotion are available on Amisco catalogue or on request.

Is conform to the followiwing directives:2014/35/UE LVV2011/65/UE RoHSS

withh referere nce (if applicable) to the following harmonized ed standards:EN 1N 12100 [2010]EN 6020204/1 0 [2006]

EN 60664/1 [20[2007]VDE 0580 [2011]11]

Filippo RotootondoAmAmisco Technical Division on Manager

Paderno DuDugnano, 20 April 201il 2 6

The data supplipplied in Amisco catalogues are to be consulted, and pertinrtinent accident preventioonn regulations are to be followed duringproduct installattionio and use. Any unauthorized work performed by purchachaser or by third parties can ca impair its functions, and relievesAmisco of all warranranty claims and liability for any resulting damage.

DIN 43650 A

AMP Junior

KOSTAL M27X1

FLYING LEADS

4

5047.2

1.51.5

22 28

18

34

9

4.8

9

14

M3

0.8

Ø 20

Ø 36.5

Ø 20

10

12

Ø 14.1EVI3E/1450

1.5

1.5

47.2

13 MIN34CO

NNEC

TOR

AXIS

0.5

Ø 14.1 20

2028

Ø 36.5

1416

30

0.8

2235

5

8

1.5

47.2

1.5

28

Ø 36.5

34

Ø 14.1

Ø 4

Ø 20

M2

7X

1

14

221010

Ø 20

50

8

28

Ø 36.5

34

14

Ø 20 1.5

47.2

1.5

Ø 20Ø 14.1

50

227

600

4

CODE 3E14D...

CODE 3E14A...

CODE 3E14K...

CODE 3E14C...

M3 Torque 0,4÷0,6Nm

(EN 175301-803 ISO 4400)

600 mm flying leads as a standard

EVI 3P/16


12VDC 26W 01

24VDC 26W 01

EVI 3P/16

Force stroke curve at –10% nominal voltage and stabilized duty

temperature. This graph has to be intended as an indication.

In fact it can change according to the specific applications.





TECHNICAL DATA








min : according to the specific application.





MATERIALS: Wire class H200°C, Encapsulant: glass filled PA

6-6 or glass filled PBT. Other materials on request.

The coil EVI3P16 has been developed originally by Amisco in

1990 and then got a wide diffusion on the market of hydraulic

valves.


Degree of protection: IP 54 ( EN 60529 )


DIN 43650A IP65

KOSTAL (M27X1) IP67

FLYING LEADS IP67

AMP JUNIOR IP65

DEUTSCH DT04 IP69K

AMP SUPERSEAL IP69K

METRIPACK2 IP69K

ISO 15170 IP69K



STROKE (mm)

FORC

E (N

)

80

60

40

20

0

120

100

0,2 0,5 1,5 2 2,5 31

5




CCooiil type: EVI 3P16Nominal voltage: up to 230V

NoNominal Power: up to 26W [DC] Ambiebient temperature: -40 ÷ +50 °C

Tolerance rarange onn nominal values: ±10%

Type of connection and other information aare availar ble on Amisco catalogue or on request.

Is conform to the followinwing directives:2014/35/UE LVV2011/65/UE RoHSS

withh referere nce (if applicable) to the following harmonized d standas rds:EN 12N 12100 [2010]EN 6020204/1 0 [2006]

EN 60664/1 [20[2 07]VDE 0580 [2011011]

Filippo RoRotondoAmisco TeA chnical Divisioision Manager

Paderno DugDugnano, 20 April 20 2016

The data suppliedlied in Amisco catalogues are to be consulted, and pertinennent accident prevention regulatiore ns are to be followed duringproduct installationon and use. Any unauthorized work performed by purchaseaser or by third parties canan impair its functions, and relievesAmisco of all warrantynty claims and liability for any resulting damage.

50

1.5

1.5

47.2

13 MIN34CO

NNEC

TOR

AXIS

0.5

Ø 16.1

Ø 39Ø 20

2028

37.5

1416

30

0.8

255

DIN 43650 A (EN 175301-803 ISO 4400)

6

AMP JUNIOR

ISO 15170

Ø 16.1

Ø 39Ø 20

Ø 20

10 25 2818

M3

37.5

12

94.

8

1.5

1.5

47.2

50

0.8

34

1416


20

28

10

7

Ø 16.5

Ø 16.5Ø 20

3.5

13.5

17.7

1.5

1.5

47.2 50

1531

15.5

11

4

CODE 3P16D...

CODE 3P16I...

CODE 3P16A...

AMP SUPERSEAL

METRIPACK 2

7

DEUTSCH DT04

CO

NN

EC

TOR

AX

IS

TER

MIN

AL

AX

IS

2528

23.6

20

28.5 27.5

56

6

37.5 1.5 1.547.2

50

Ø 39

Ø 1

6.15

Ø 1

6.15

Ø 2

0

Ø 2

0

41.1

38

31.4

31

PIN 2 (-) PIN 1 (+)

CO

NN

EC

TOR

AX

IS

TER

MIN

AL

AX

IS

28

23.6

20

28.5 28.5

57

6

37.5 1.5 1.547.2

50

Ø 39

Ø 1

6.15

Ø 1

6.15

Ø 2

0

Ø 2

0

41.5

38

31.4

25

31

PIN 2 (-) PIN 1 (+)

28

23.6

20

28.5 31.760.2

5.5

37.5 1.5 1.547.2

50

Ø 39

Ø 1

6.15

Ø 1

6.15

Ø 2

0

Ø 2

0

46.3

35.5

25

41.9

PIN 1 (+) PIN 2 (-)

CODE 3P16S...

CODE 3P16M...

CODE 3P16T...

KOSTAL M27X1

8

FLYING LEADS

8

1.5

47.2

1.5

28

34

Ø 16.1

Ø 4

Ø 20

M2

7X

1

251010

Ø 20

50

8

28

34

Ø 20 1.5

47.2

1.5

Ø 20

Ø 16.1

34

257

600

1416

3037.5

Ø 39

50

Ø 39

37.5

1416

30

CODE 3P16C...

CODE 3P16K...

600 mm flying leads as a standard

9

EVI 3D/19


12VDC 30W 01

24VDC 30W 01

EVI 3D/19

Force stroke curve at –10% nominal voltage and stabilized duty

temperature. This graph has to be intended as an indication.

In fact it can change according to the specific applications.





TECHNICAL DATA








min: according to the specific application.





MATERIALS: Wire class H200°C, Encapsulant: glass filled PA

6-6 or glass filled PBT. Other materials on request.


Degree of protection: IP 54 ( EN 60529 )


DIN 43650A IP65

FLYING LEADS IP67



STROKE (mm)

FORC

E (N

)

50

0

250

200

150

100

0,2 0,5 1,5 2 2,5 31




Coiill type: EVI 3D19NoNominal voltage: up to 230V

Nominainal Power: up to 30W [DC]Ambient temtemperature: -40 ÷ +50 °C

Tolerance range onon nominal values: ±10 %

Type of connection and other information are avaivailable on AMISCO catalogue or on request.

Is in conformity with the follollowing directives:2014/35/UE LVV2011/65/UE RoHSS

with refereference (if applicable) to the following harmonized stastandards:EN 1212100 [2010]EN 60204/104 [2006]

EN 60664/1 [20007]0VDE 0580 [2011]1]

Filippo Ro RotondoAmisco Technical Diviivision Manager

Paderno DuDugnano, 20 Aprilil 2012 6

The data ta supplied in AMISCO Catalogues are to be consulted, anand pertinent accident prevprevention regulations are to be followed during produoduct installation and use. Any unauthorized work performermed by purchaser or by ththird parties can impair its functions, and relieves AMISCO ofAM all warranty claims and liability for any resultinlting damage.

(EN 175301-803 ISO 4400)DIN 43650 A

FLYING LEADS

10

CODE 3D19D...

CODE 3D19C...


Ø 23.6

Ø 19.26

Ø 29

610 6 30.7

2.35

2.35

17.5

30

60.7

14.3

45.7

56

43.2

Ø 29

Ø 30.7

2.35

2.35

56

30

18

Ø 23.6 Ø 45.7

Ø 4

3.45

17.7

59

Ø 19.25

M3

60.7

0.03

Tel. +39 02.99.00.181

Fax +39 02.99.00.18.60

[email protected]

AMISCO S.p.a.Via Piaggio, 70

20037 Paderno Dugnano (Mi)

Italy

w w w . a m i s c o . i t

Rev. 03/2017

Documents

EVI 3 2017 - · PDF fileALL COILS FEATURE † Heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material † Class H 200°C wire according to IEC 60317-13