PARTS LIST

3601 Larchmont N.E. • Warren, OH 44483 • Phone: 330-372-3700 • Toll Free: 800-637-7297 • Fax: 330-372-3118info@everettindustries.com • www.everettindustries.com

A Word About Everett Abrasive Cutoff WheelsThe Everett Industries plant in Warren, Ohio houses our own cutoff wheel manufacturing facility. All the wheel grades listed below, for both dry and wet cutting, have been developed and extensively tested to produce quality cuts on a wide range of material alloys, sizes and shapes. By using only premium quality ingredients and exacting manufacturing methods, Everett cutoff wheels provide wheel grades designed for maximum performance on your new Everett cutoff machine.

Resinoid Bond Aluminum Oxidefor Dry Cutting

Rubber Bonded Wheels for Wet Cutting

The following rubber bonded wheelscannot be fiberglass reinforced.

Use only on well guardedmachines with extreme caution

and personal protection.

Fiberglass Reinforced

For general purpose cutting.

For cutting thin wall shapes andthin wall tubing.

Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure.

Excellent for high quality drycuts on stainless tubing andother thin wall tubing.

Woven fiberglass cloth ismolded in the center of thewheel for break resistance.

Woven fiberglass cloth isapplied externally on both sides of wheel for break resistance.

For wet metallurgical sample cutting.Also excellent for high quality wetcuts on hardened material, tubing.Available in most sizes.

Calendered rubber wheel speciallyformulated for general purpose use

General purpose calendered rubberwheel, designed for wet cuttingsolids, heavy wall shapes and tubing.Produces fine cut, excellent for useon wet, power head machines.

General purpose pressed rubber wheel, designed for wet cuttingsolids, heavy wall shapes and tubing.Larger grit sizes generally produce

all sizes.

Designed for cutting nonferrousshapes — copper, brass, etc., rubberbond silicon carbide. Prices same aswet cutting wheels. Available in allsizes.

Woven fiberglass cloth is molded in the wheel for break resistance.

We manufacture other grades of wet and dry abrasive cut-off wheels to meet specific requirements

#141045FG

45FGE

T32FGT32FGE

23020FG23020FGE

GTK-7FGGTK-7FGE

FG

FGE

#1115

#1329

#60

#91

8042

80478040

80438046

8044

8076-W

8077-W

8078-W 8079-W

8041

Fiberglass Internally ReinforcedWoven fiberglass cloth is molded in the center of the wheel for break resistance.

Pressed resin-rubber wheel; excellent for high quality cuts on hardened material, also metallurgical sample cutting. Available in most sizes.

93FG Reinforced Wet Cutting Abrasive Cutoff Wheels

Part No. Description

11201 BASE CASTING W/ BUSHINGS (MITER)11202 SWIVEL ARM11203 TRUNNION STAND11204 ROCKER ARM11205 DOWN STOP BRACKET11206 VISE SCREW BRACKET11207 VISE CLAMP BLOCK11208 VISE FEED SCREW11209 REAR SPARK GUARD11210 WHEEL GUARD11211 WHEEL GUARD, OUTER11214 TRUNNION PIN11215 BASE CABINET11216 INDEX PLATE11216-1 INDEX POINTER11217 DOWN STOP SCREW11218 INNER BELT GUARD11219 OUTER BELT GUARD11224 ARBOR SHAFT KEY11224-A ARBOR SHAFT ASSEMBLY11229 PULLEY SPACER11230T ARBOR PULLEY W/BUSHING11231T MOTOR PULLEY W/BUSHING11232T BELT11233 5HP MOTOR 220/440/3/6011235 SWITCH BRACKET11237 MOTOR ADJUSTMENT EYE BOLT11238 HANDLE WITH GRIP11242 TRUNNION PIN CAP ASSY11243 TRUNNION THRUST WASHER11244 SWIVEL ARM SHAFT11247 BASE CASTING WITH BUSHINGS11248 L TYPE WORKHOLDER VISE11249 DOWN STOP SCREW11250 FRONT SPARK GUARD11252 V VISE11411 CHAIN11415 ARBOR SHAFT NUT11417 DOWN STOP SCREW NUT11436 WRENCH11618 CAM LOCK VISE11618-1 CAM LOCK VISE (RT)11621 VISE CLAMP BLOCK11621-1 VISE CLAMP BLOCK (RT)

12” STRAIGHT CUTOFF

12” MITERING CUTOFF

Part No. Description

11400 BASE CASTING W/BUSHINGS11400-X POWERHEAD BASE CASTING WITH BUSHINGS11401 V VISE11404 TRUNNION BUSHING (2)11405 TRUNNION PIN11411 CHAIN11415 ARBOR SHAFT NUT11416 DOWN STOP SCREW11417 DOWN STOP SCREW NUT11424 ROCKER ARM11424-X POWERHEAD ROCKER ARM11430 PULLEY SPACER 1 X 111430-1 PULLEY SPACER 1 X 5/811432-A ARBOR SHAFT ASSY11436 WRENCH11437 WOODRUFF KEY11438 MOTOR PULLEY W/BUSHING11439 ARBOR PULLEY W/BUSHING11440 BELTS (STR OR DBL MIT)11441 OUTER BELT GUARD11442 INNER BELT GUARD11456 MOTOR 220/460/3/6011457 KEY FOR MOTOR PULLEY11465 HANDLE ASSY W/GRIP11469 WHEEL GUARD11470 WHEEL GUARD BOLT11601 CABINET BASE11602 BASE PLATE11603 INDEX MARKS (4)11604 SWIVEL ARM11605 INDEX POINTER11606 TRUNNION STAND11607 DOWN STOP BRACKET11608 REAR SPARK GUARD11609 ROCKER ARM11610 WORKHOLDER11611 WHEEL GUARD W/HANDLE/GRIP11612 WHEEL GUARD OUTER11614 INNER BELT GUARD11615 OUTER BELT GUARD11617 FRONT SPARK GUARD11618 CAM LOCK VISE11621 VISE CLAMP BLOCK11622 WORK REST BRACKET11626 TRUNNION PIN11630 REAR BELT GUARD BRACKET11632 DOWN STOP SCREW11640 BELTS (MITER)12056 TRUNNION PIN CAP ASSY

14”-16” STRAIGHT CUTOFF

16” MITERING CUTOFF

DOUBLE MITER “COMMON APPEARANCE” PARTS IDENTIFICATIONREFERENCE DESCRIPTION 16” DOUBLE

MITER PART #20” DOUBLEMITER PART #

ABCDEF

1450214522145231452914530

REAR SPARK GUARDWORK HOLDER VISECHAINSWIVEL ARM SHAFTSWIVEL ARMAIR CYLINDER

SWIVEL ARM BEARINGAIR VISE CONTROL VALVEAIR REGULATORDOUBLE MITER CHAIN HOLDERMITER ANGLE INDICATORS

FOR OTHER PART NUMBERS REFER TO THE PARTS LISTOF THE STRAIGHT MODEL OF YOUR SIZE MACHINE

DOUBLE MITER COMMON PARTS

11613 1450711619 1455411455 1145511641 14502-111604 1450311642 14520

NOTE B – Front guard part #11412 bolts to base casting.

Front spark guard part #12010bolts to dust collector cabinet base.

G AIR CYLINDER BRACKET 11651 14528

16” DOUBLEMITERING CUTOFF

20”-22” DOUBLE MITERING CUTOFF

16” WET CUTOFFPart No. Description11400-X BASE CASTING HEAVY DUTY W/

BUSHINGS11401 V VISE11404 TRUNNION BUSHING (2)11405 TRUNNION PIN11411 CHAIN11415 ARBOR SHAFT NUT11416-W DOWN STOP SCREW11417 DOWN STOP SCREW NUT11420-W AIR VISE PILLOW BLOCK11424 ROCKER ARM11424-X POWERHEAD ROCKER ARM11430 PULLEY SPACER 1 X 111432-A ARBOR SHAFT ASSEMBLY11436 WRENCH11437 WOODRUFF KEY11438-W MOTOR PULLEY W/BUSHING11439-W ARBOR PULLEY W/BUSHING11440 BELTS11441 OUTER BELT GUARD11442-W INNER BELT GUARD11448 WET PAN W/STAND11456-W 10 HP MOTOR 220/460/3/6011457-W KEY FOR MOTOR PULLEY11465 HANDLE ASSY W/GRIP11469 WHEEL GUARD11470 WHEEL GUARD BOLT11473 COOLANT PUMP & MOTOR11473-A COOLANT PUMP & TANK11474 COOLANT VALVE11474-A COOLANT VALVE AND

HOSES11493-W AIR CYLINDER BRACKET11495-W AIR VISE SHAFT12056 TRUNNION PIN CAP ASSY13020 AIR CYLINDER BRACKET14511-W AIR VISE ACTUATING ARM14512 AIR CYLINDER CLEVIS14513-W CHAIN ROLLER14520 AIR CYLINDER14520-1 AIR CYLINDER CLEVIS PIN14522 AIR VISE CONTROL VALVE14523 AIR REGULATOR

HYDRAULICPOWERHEAD PARTS

11500 HYDRAULIC CYLINDERTRUNNION

11501 CYLINDER TRUNNIONPILLOW BLOCKS

12686 UP/DOWN LIMIT SWITCH12687 SPEED CONTROL VALVE12688 HYDRAULIC CYLINDER

W/CLEVIS & PIN12694 HYDRAULIC PUMP12694V HYDRAULIC VALVE12694S SOLENOID COILS13021 UP STOP LIMIT SWITCH HOLDERNOTE C12685 16” WET OR DRY12095 20” STRAIGHT DRY13018 20” STRAIGHT WET OR DRY

W/OSCILLATION14545 20” MITER WET OR DRY13017 20” MITER W/OSCILLATION12680 26” DRY12699 26” WET

NOTE A – When ordering parts for operatorcontrol station identify switchtype P.B. (Push Button)

Long or short arm leverAND

Switch function (Start/Stop, HeadUp-Down, oscillation)

ANDMachine size and type.

DOUBLE ACTION AIR VISE PARTS1701 DOUBLE ACTION AIR VISE BASE1703L VISE CLAMP BLOCK LEFT1703R VISE CLAMP BLOCK RIGHT1704L DA AIR CYLINDER LEFT1704R DA AIR CYLINDER RIGHT

Part No. Description11401 V VISE11415 ARBOR SHAFT NUT11417 DOWN STOP SCREW NUT11430 PULLEY SPACER 1 X 111436 WRENCH11437 WOODRUFF KEY11457 KEY FOR MOTOR PULLEY 10HP11457-2 KEY FOR MOTOR PULLEY 20HP12002 WET PAN12003 SPLASH CURTAIN LEFT12004 SPLASH CURTAIN RIGHT12006 BASE PLATE12008 CHAIN12012-W DOWN STOP SCREW12017 ROCKER ARM12017-X POWERHEAD ROCKER ARM12018-A ARBOR SHAFT ASSY.12022-W BELT12026 20HP MOTOR 220/460/3/6012027-W ARBOR PULLEY W/BUSHING12028-W MOTOR PULLEY W/BUSHING12047 HANDLE SOCKET12048 HANDLE W/GRIP12054 OUTER BELT GUARD12055-W INNER BELT GUARD12056 TRUNNION PIN CAP ASSY.12214-W/D OSC COUPLING LINK12601 CHAIN12603 FENCE STATIONARY 90º12604 FENCE SWIVEL 45º

EACH SIDE OF 90º12607 VISE, MOVEABLE HEAD12608 VISE BODY12609 VISE ADJUSTING SCREW12610 OSCILLATING TRUNNION STAND12611 WHEEL GUARD 26”DRY12611-W WHEEL GUARD 26” WET12612 WHEEL GUARD SHIELD12613-A ARBOR SHAFT ASSEMBLY12614 OSCILLATOR COUPLING12614-W/D OSCILLATOR COUPLING LINK12615 OUTER BELT GUARD12616 CABINET BASE12618 ARBOR SHAFT NUT12619 PULLEY SPACER12620 HANDLE SOCKET12625 HANDLE WITH GRIP12626 ROCKER ARM12629 TRUNNION PIN UPPER ARM12630 TRUNNION PIN LOWER OSC.12631 PILLOW BLOCK OSC. TRUNNION12632 ARBOR PULLEY DRY 30HP W/BSHG12632-W ARBOR PULLEY WET 30HP W/BSHG12632-4 ARBOR PULLEY DRY 40HP W/BSHG12632-4W ARBOR PULLEY WET 40HP W/BSHG12633 MOTOR PULLEY DRY 30HP W/BSHG12633-W MOTOR PULLEY WET 30HP W/BSHG12633-4 MOTOR PULLEY DRY 40HP W/BSHG12633-4W MOTOR PULLEY WET 40HP W/BSHG12634 BELT FOR 30HP12634-4 BELT FOR 40HP12635 FRONT BELT GUARD BRACKET12636 REAR BELT GUARD BRACKET12637 30HP MOTOR 220/460/3/6012637-4 40HP MOTOR 220/460/3/6012638 OSCILLATOR MOTOR12639 KEY FOR 30HP MOTOR PULLEY12639-4 KEY FOR 40HP MOTOR PULLEY12640 ARBOR SHAFT KEY12646 V VISE12647 WET PAN12677 INNER BELT GUARD12679 SPLASH CURTAIN LEFT12681 SPLASH CURTAIN RIGHT12692 COOLANT FLOW VALVE12693 COOLANT PUMP12693-A COOLANT PUMP ASSEMBLY13009 WHEEL GUARD13010 WHEEL GUARD SHIELD13020 AIR CYLINDER BRACKET14511 AIR VISE ACTUATING ARM14512 AIR CYLINDER CLEVIS14513 CHAIN ROLLER14515 AIR VISE PILLOW BLOCK BASE14515-1 AIR VISE SHAFT PILLOW BLOCK14515-2 or 6 AIR VISE SHAFT14520 AIR CYLINDER14522 AIR VISE CONTROL VALVE14523 AIR REGULATOR

NOTE A – See page 10

20” - 22” WET CUTOFF

26” DRY CUTOFF26” WET CUTOFF

3601 Larchmont N.E. • Warren, OH 44483 • Phone: 330-372-3700 • Toll Free: 800-637-7297 • Fax: 330-372-3118info@everettindustries.com • www.everettindustries.com

A WORD ABOUT EVERETTABRASIVE CUTOFF WHEELS

The Everett Industries plant in Warren, Ohio houses our owncutoff wheel manufacturing facility. All the wheel grades listedbelow, for both dry and wet cutting have been developed andextensively tested to produce quality cuts on a wide range ofmaterial alloys, sizes and shapes. By using only premium qualityingredients and exacting manufacturing methods, Everett cutoffwheels provide wheel grades designed for maximum performanceon your new Everett cutoff machine.

RESINOID BOND ALUMINUM OXIDEFOR DRY CUTTING

FIBERGLASS REINFORCED - WOVEN FIBERGLASS CLOTH

IS MOLDED IN THE WHEEL FOR BREAK RESISTANCE.

RUBBER BONDED WHEELS FOR WET CUTTING

THE FOLLOWING RUBBER BONDED WHEELS CANNOT BEFIBERGLASS REINFORCED

#1410 For wet metallurgical sample cutting. Also excellent for highquality wet cuts on hardened material and tubing. Available inmost sizes.

#1115 Calendered rubber wheel specially formulated for generalpurpose use on our 10" wet machine.

#1329 General purpose calendered rubber wheel, designed for wetcutting solids, heavy wall shapes and tubing. Produces finecut, excellent for use on wet, power head machines. Availablein 14", 16", 20" and 26".

#60 General purpose pressed rubber wheel, designed for wet cuttingsolids, heavy wall shapes and tubing. Larger grit sizes generallyproduce coarser cut than #1329. Available in all sizes.

#91 Designed for cutting nonferrous shapes - copper, brass, etc.,rubber bond silicon carbide. Prices same as wet cuttingwheels. Available in all sizes.

45FG45 FGE

T32 FGT32 FGE

23020FG23020FGE

GTK-7FGGTK-7FGE

FG

FGE

}

}

}

}}

For general purpose cutting

Woven fiberglass cloth is molded in the center of thewheel for break resistanceWoven fiberglass cloth is applied externally on bothsides of wheel for break resistance

Excellent for high quality dry cuts on stainless tubingand other thin wall tubing

For cutting thin wall shapes and thin wall tubing

Designed for use on machines with POWERHEAD(automatic wheel feed) where free cutting ability isneeded because of constant feed pressure

}WE MANUFACTURE OTHER GRADES OF WET AND DRY ABRASIVE

CUTOFF WHEELS TO MEET SPECIFIC REQUIREMENTS.

REINFORCED WET CUTTINGABRASIVE CUTOFF WHEELS

Fiberglass Internally ReinforcedWoven fiberglass cloth is molded in the center of the

wheel for break resistance.

93FG Pressed resin-rubber wheel; excellent for highquality cuts on hardened material, alsometallurgical sample cutting. Available in mostsizes.

Use only on well guarded machines withextreme caution and personal protection.

Warranty“All Everett products are warranted against defective materials and workmanship,conditioned as follows. If a product is returned to Everett by the original purchaserprepaid within 1 year after delivery to the original purchaser and is judged by Everettto be defective, the product will be repaired, replaced or credited. This warranty isexclusive and in lieu of all other warranties of quality, whether written, oral or implied(including any warranty of merchantability or fitness for purpose). Everett will not beliable for any consequential damages and no claims will be allowed for repairs toEverett products by the purchaser or any third party.”