Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Even if you have never had a seizure, there is a small chance that you are
photosensitive, and exposure to flashing lights can cause YOU to have a seizure. If
you are not willing to accept this risk, please do not use Mind Gear L/S systems.
Volume control buttons
Display at start-up showing it is
turned on & in the IdLE mode,
meaning no flashing of the lights
or sound generation. Program
numbers are also displayed here
“Relative” volume setting
“LOCK” is displayed when program
has been paused by the user.
Program number displayed before
pressing enter. For manual
operating mode - select P00
Display showing “Autopilot
Delta” selected. The other
Autopilot programs are:
APH = “Autopilot Theta”
APA = “Autopilot Alpha”
APb = “Autopilot Beta”
APS = “Autopilot Super Beta”
Display showing “PPP” selected for the personal preference program, which allows users
to set & store their favorite program, volume level, pitch, and sparkle settings. To
select “PPP” simply turn on the Zen Master and use the down function key until the
letters PPP appear in the display. Then hitting the enter key will make the display blink
“PPP”. Once blinking, the unit is ready for you to select your favorite program number
and settings. After selecting your favorite settings, press and HOLD down the enter
key until the display goes blank.
Display showing “Blend 3” selected by the
“Sparkle” feature. There is also a “bL2” and
a range of “fixed” pulse widths from 10%-
90%.
Pulse width or duty cycle refers to how
long the lights stay on verses how long they
are turned off. Most L/S machines have
this permanently set to 50%
Display showing the phase of
the lights/sound. This top
bar represents the left eye.
The Bar below it represents
the left ear.
Right eye
Phase
Button
Display is currently showing both
eyes & both ears are stimulated
together.
Display showing the 10 second countdown that begins when a program is selected by
pressing the enter key. This provides the user time to press the play button on the
CD player and put on the glasses and headphones before the program actually begins.
Pressing the Up & Down keys during
the 10 second countdown allows the
user to adjust the time of the built-
in programs from 5 min –2 Hrs.
Display showing the Turbosonix function
selected. Once the enter button is pressed
the display will show “cd-“. The dash indicates
that the system is now ready to read specially
encoded CD’s such as “Turbosonix” or
“AudioStrobe” which have the light show
encoded along with the music.