Evaporator Catalogue

5/16/2018 Evaporator Catalogue

1/8

WAESSERREC ( 5fJ-al~Itat~ ltd

S IMPLIFY ING PROCESS

DE5IG MN A

NAGE

E MN EG NI TNEE TR UI RN NG K

EV

PRoJECT5


2/8

Chemical and Agrochemical .Petrochemicals .Food and Pharmaceutical,s.Dye and tnterrnedlates eMe tal refining .Fine Chemicals .Edible Oil.Dairy Industry

WAESSERREN, a groupof elite and adeptengineers, originatingfrom Netherlands formedto serve the industry withthe best technology.We have engineers from ivarious parts of theworld,hailing fromNethertan ds, USA & India.Simplifying process isour motto and to providequality products withsimplest methods is ourvision, with which ourservices make everythinglook simpler than int rl-eating the process.


3/8

SERVICES WE OFFER We provide design solutions for controlling Air & Water

Pollution Controlling Systems, which includes Sizing of theEquipment, Thermal & Mechanical Design.

We perform Project Management.We provide Turnket Solutions towards all the

industries,starting with Design Solution to Commissioning. We perform Detail Engineering like layouts, Detail Design ofEquipment, Orientations, etc .

We provide the best Manufacturing Facilities available with us. We provide Spreadsheets to signify the System Design.

provide P&1. Diagrams, layouts & Fabrication Drawings.

T~ECHNOLOGYAVAILED WITH US 2D drawing & 3D modelling facilities with AUTOCAD. Process Simulation facility with HTRI for Heat Exchangers. Pressure vessels Simulation with Advanced PV & PVElite.


4/8

EVAPORATION SYSTEMSAn evaporator, as defined in chemical engIneering, is an apparatus for efficIently usingthe heat from steam to evaporate water-In this process, water is boiled in a sequence ofvessels, each held at a lower pressure than the last. the vapor boiled off in one vesselcan be used to heat the next, and only the first vessel (at the highest pressure) requiresan external source of heat.

Feed in. .

Dry

To condensor

Concert rate. +.Powder

CALANDRIA in which the heat transfer takes place.fjVAPOR LIQUID SEPARATOR to separate vapor & ll q u id.

PREHEATER to raise the liquid temperature.~ STRIPPING SYSTEM to separate the low boiling liquids.

Thermo Vapor Recompressor improves steam efficiency . DRYER to produce the dry solids as output.


5/8

FALLING FILM EVAPORATIONIn falling film evaporators the liquid is evaporated by forming thinfilm where the product is evenly distributed into the heating tubes.As thin film enters the tube it flows downwards at boilingtemperature and is partially evaporated .. In most cases steam is usedfor heating the evaporator.As the Product & Vapor flow together.The separation of the Concentrated product form its vapor undergoesin the lower part of the Calendria and the separator.

FORCED C IRCULATION EVAPORATIONThis evaporator efficiently handles the evaporation of liquids witha high solid content. high vlscosttv, or a tendency to scale or foul.They are also often used as crystallizers.The system is often used as a finishing evaporator for theconcentration of liquids to a high solid content. followed by a lowsolid multt-st age, TVR evaporator (Termal vapor Recompresion).Boiling in the Forced Circulation evaporator is suppressed in theheat exchanger by backpressure and takes place when the liquidenters the lower pressure vapor liquid separator chamber.


6/8

OUR DESIGN FEATURES: MAXIMUM PRODUCT QUALITY. LOWER OPERATION AND MAINTENANCE COST. FIRM AND ApPRESSED DESIGN. EASIER OPERATION WITH AUTOMATION. HIGHEST ENERGY EFFICIENCY. WIDE POSSIBILITIES OF DESIGN.

STEAM ECONOMY DETAILS:

1 STAGE

2 STAGE3 STAGE

4 STAGE

5STAGE


7/8

FILM DRYERAgitated Thin Film Dryer is an indirectly heated continuous dryer. The feed canbe in the form of a solution, slurry, wet cake or paste. If required it operatesunder vacuum. We offer both vertical and horizontal versions.The vertical Agitated Thin Film Dryer has a jacketed cylinder with a closely fit-ting rotor at the centre. During operation the rotor revolves at high speed.The feed distributor spreads the incoming feed uniformly over the cylindertop periphery. The rotor blades pick up the material, spread it over heated sur-face in a thin film and agitate the film intensely, as it rapidly travels down. Thematerial transforms from solution to slurry, wet cake, wet powder and finallydry powder as it travels from. top to bottom. The vapour generated risescounter-currently to the inbuilt entrainment separator. Here the entraineddroplets are separated from the vapour stream. The clean vapour leaves thedryer through the vapour nozzle at top .. Feeds can be processed without pre-concentration or dilution. Indirect heating and drying in absence of air. Quick processing time, best suitable for heat sensitive products. Fine powder of uniform consistency can eliminate pulverizer from down-strea m step.

Intense agitation suppresses fouling, keeps heat transfer surface clean. Excell.ent turn down capability. Low product holdup, ideal for hazardous applications. Different rotor configurations to suit variety of applications.


8/8

CONTACT USWAESSERREN

NETH ERLAN' OSHOUSE No: 5-2

ADRIIAN KLIUTSRAAT1065 XR

AMSTERDAMNETHERLANDS

M:+31 064 851 3431T: +31 020 668780

E: IN Fo@WAESSERREN. COMW: WWW.WAESSERREN.CoM

U.S.A7713 S

MINGO ROADAPT 1119TULSA, OKP:+1 708 790 0733

E: [email protected]

Documents

Evaporator Catalogue