Europe - haldex.com · Durable and reliable, Grau products are thoroughly tested for compliance with Haldex standards and come with a full warranty. ... 4 2 CONTENTS Europe System

Grau Product Catalogue Europe

Edition 2

3Edition 2 Innovative Vehicle Solutions


Introduction

This catalogue provides an overview of Grau products for the European aftermarket. They include air tanks and saddles, fittings, air coils and air tubes as well as electrical coils.

Durable and reliable, Grau products are thoroughly tested for compliance with Haldex standards and come with a full warranty.

This catalogue presents detailed information about each product range for easy identification of required items. Inclusion or exclusion of an item has no bearing on its availability. For availability, please contact Haldex directly.

If you cannot find an item:

› Check Findex at www.haldex.com/Findex

› Contact Haldex directly

We hope you find this catalogue useful. We welcome all feedback and suggestions for improvement.

Thank you for choosing Haldex.

INTRODUCTION

Although Haldex does its best to ensure the accuracy of all information in this catalogue, Haldex assumes no responsibility for any issues that may arise as a result of inaccurate data in this catalogue. Haldex reserves the right to amend this information without notice.

Go to Findex

4 Innovative Vehicle Solutions Edition 2

Grau Product Catalogue EuropeCONTENTS

System components Page

ABS system 10

EBS system 12

Air coils and air tubes Page

Air coils 24

Air tubes polyamide PA12 PHLY air tubes 26

Air tubes polyamide PA10.12 PHL air tubes 28

Air tubes elastomeric polyester 30

Air tanks and saddles Page

Aluminium air tanks 16

Steel air tanks 18

Saddles for air tanks 20

Accessories Page

Alu manifold 34

Miscellaneous 35


Grau Product Catalogue Europe CONTENTS

Actuation Page

Double diaphragm spring brake actuators 44

Pressure converters 45

Air brake Page

Switches 48

Brake adjusters Page

Manual brake adjusters 52

Air disc brakes Page

Disc brake pads 56


Grau Product Catalogue EuropeCONTENTS

Fittings

Straight male terminal-RTC 61

Straight male terminal 63

Adjustable elbow stud-RTC 65

Adjustable elbow stud 66

Adjustable tee stud-RTC 67

Adjustable tee stud 68

Adjustable tee stud with test point-RTC 69

Adjustable tee stud with test point 70

Union-RTC 71

Union 71

Tee union-RTC 72

Fittings

Straight female terminal 73

Stud bulkhead terminal-RTC 73

Stud bulkhead terminal 74

Swivel elbow stud-RTC 74

Swivel elbow stud 75

Swivel stud with test point 75

Swivel tee stud 76

Swivel adaptor 77

Swivel stud 79

Swivel 80


Grau Product Catalogue Europe CONTENTS

Fittings

Pivoted adaptor 82

Test point 85

Plug 86

Reducer 86

Adaptor 87

Bulkhead adaptor 89

Threaded adaptor bulkhead 90

Bulkhead elbow 91

Drain valve 91

Elbow hosetail 92

Fittings

Hosetail 92

Male connector 93

Bulkhead male connector 93

Bulkhead union 94

Male elbow 94

Reinforcing insert for DIN tube 95

Stud-standpipe adaptor 95

RTC tool 39 96





SYSTEM COMPONENTS

ABS system 10

EBS system 12

ABS system

Anti-lock braking system which provides better road adherence and prevents the wheels from locking up during braking.

042 566 509 042 572 209 042 572 309 950 364 072 950 364 436

950 610 010



SYSTEM COMPONENTS

ABS system

Part

nu

mb

er

Typ

e

Ap

plic

atio

n

Syst

em

Iden

tifica

tion

Incl

ud

ed

Fuse

Vo

ltag

e (V

)

No

te

042 566 509 socket ISO 7638 c/w pin

042 572 209 pin ISO 7638 fused 1.5 mm

042 572 309 socket ISO 7638MODAL/MODULAR

green pins x5 (crimp) fused 24

302 002 011 plug ISO 7638 pins x7 24 c/w boot

364 143 031power cable

ISO 7638 MODAL pins x5 unfused 12

950 364 072 socket ISO 7638MODAL/MODULAR

green pins x5 (crimp) fused 24 5x1.5 mm²

950 364 436 socket ISO 7638 universal blue pins x7 (screw) fused 24(3/5)x1.5 mm² +2x4 mm²

950 610 010 plug ISO 7638

950 611 030 flex coil ISO 1185 (24N) pins x7light system; also for EBS

950 611 030/OM flex coil ISO 37315 (24S)overmoulded; also for EBS

950 611 035 flex coil ISO 3731 (24S)light system; also for EBS

950 611 035/OM flex coil ISO 3731 (24S)overmoulded; also for EBS

016 705 309 018 500 309 018 500 409 042 566 409 042 571 409 042 585 709

756 115 88 756 116 75 756 119 12 756 119 73 756 132 18

016 705 509 393 585 001



SYSTEM COMPONENTS

ABS system

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

016 705 309 exciter 100 teeth inner Ø (mm): 152

016 705 509 exciter 100 teeth inner Ø (mm): 176 BPW 12 TM



018 500 309 exciter 100 teeth inner Ø (mm): 165 ROR 22.5'' TM, Fruehauf

018 500 409 exciter 80 teeth inner Ø (mm): 162 ROR 15'' TM, Fruehauf

028 512 809 label tab-tag

028 532 409 label Info Point 39x39 transparent

042 566 409 pin ISO 7638 socket x1 1.5 mm

042 571 409 bulb ABS trailer warning lamp 24V, 5W double pole

042 585 709 grease 4 mg molycotte

393 585 001 exciter 80 teeth inner Ø (mm): 152 BPW 9 TM


756 115 88 warning lamp

756 116 75 junction box

756 119 12 bulb ABS trailer warning lamp 24V, 5W double pole

756 119 73 bracket ABS trailer warning lamp

756 132 18 connection box electrical connection MGX orange

Syst

em c

om

po

nen

ts

950 610 020 950 610 030 950 610 040 950 611 040

EBS system

EBS system – electronic braking system that combines ABS function, Electronic load sensing, CAN communication and Stability function.



SYSTEM COMPONENTS

EBS system

Part

nu

mb

er

Typ

e

For

Wo

rkin

g

len

gh

t (m

)

Incl

ud

ed

Mat

eria

l

Ap

plic

atio

n

072 113 socket ADR

072 123 socket ADR

072 213 plug ADR

072 223 plug ADR

950 610 020 socket ISO 7638 pins x7 (crimp) EB+

950 610 030 socket ISO 7638 pins x7 parking

950 610 040 electrical coil ISO 7638 3.5 pins x7 PUR 5x1,5mm²+2x4mm²

950 610 050 electrical coil ISO 12098 3.5 pins x15 light system

950 611 040 flex power coil ISO 12098 (24N/24S) 3.5 pins x15 PUR light system

950 611 040/OM flex power coil ISO 12098 (24N/24S) 3.5 pins x15 PUR light system



SYSTEM COMPONENTS

EBS system

042 623 719

Part

nu

mb

er

Typ

e

Att

rib

ute

A

042 623 719PC interface carry case

c/w foam inserts

11541 hose clamp kit

4200033 bracket alu

Syst

em c

om

po

nen

ts



AIR TANKS

Aluminium air tanks 16

Steel air tanks 18

Saddles for air tanks 20



AIR TANKS AND SADDLES

Aluminium air tanks

Aluminium air tanks offer safe storage of pressurised air. Lightweight aluminium tanks guarantee more than 60 percent less vehicle tare weight. And the absence of rust and iron particles means better cleaning in the pneumatic cycle.

Part

nu

mb

er

No

. of

sid

e &

en

d p

ort

s

Mat

eria

l

Ø (

mm

)

Len

gth

L

(mm

)

Len

gth

L1

(mm

)

Port

Stan

dar

d

Cap

acit

y (L

)

Max

o

per

atin

g

pre

ssu

re (

bar

)

030 06031 013U U (1+1+1+2) aluminium 310 898 690 M22x1,5 EN286-2 60 13

030 10039 612C C (2+1+1) aluminium 396 913 671 M22x1,5 EN286-2 100 12



030 2020 615C C (2+1+1) aluminium 206 700 563.5 M22x1,5 EN286-2 20 15


030 3.815 415C C (2+1+1) aluminium 154 M22x1,5 EN286-2 3.8 15









030 4027 615C 030 6039 612C 030 8031 013C030 4031 013C 030 6031 013C

030 10039 612C 030 2020 615C 030 2024 615C030 1020 615C 030 12039 612C

030 8039 612C

030 3024 615C



AIR TANKSAluminium air tanks

Air Tank Model “C”

L

A

L1

A

A

Air tank model C

Air Tank Model “U”

L

A

L1

A A

A

Air tank model U



AIR TANKS

Air

tan

ks

Aluminium air tanks

Steel air tanksSteel air tanks offer safe storage of pressurised air. They are powder-coated inside and out. They are renowned for longevity and resistance to corrosion. They offer not only top safety and maximum service life but also, due to their powder coating, satisfy the highest quality requirements of leading European vehicle manufacturers.

Part

nu

mb

er

No

. of

sid

e &

en

d p

ort

s

Mat

eria

l

Ø (

mm

)

Len

gth

L

(mm

)

Len

gth

L1

(mm

)

Port

Stan

dar

d

Cap

acit

y (L

)

030 202 446WB U (1+1+1+2) steel 246 500 483 M22x1,5 EN286-2 20

030 302 446WB U (1+1+1+2) steel 246 720 703 M22x1,5 EN286-2 30

030 350 109 C (2+1+1) steel 206 315 190 M22x1,5 EN286-2 8.5

030 350 109_24 C (2+1+1) steel 206 315 190 M22x1,5 EN286-2 8.5

030 350 209 C (2+1+1) steel 206 370 245 M22x1,5 EN286-2 10

030 350 209/A C (2+1+1) steel 206 M22x1,5 EN286-2 10

030 350 509 C (2+1+1) steel 206 690 565 M22x1,5 EN286-2 20

030 350 609 C (2+1+1) steel 246 500 361 M22x1,5 EN286-2 20

030 350 909 C (2+1+1) steel 246 720 571 M22x1,5 EN286-2 30

030 351 209 C (2+1+1) steel 276 760 605 M22x1,5 EN286-2 40

030 351 509 C (2+1+1) steel 246 940 773 M22x1,5 EN286-2 40

030 351 609 C (2+1+1) steel 276 1110 949 M22x1,5 EN286-2 60

030 351 709 C (2+1+1) steel 396 580 333 M22x1,5 EN286-2 60

030 351 809 C (2+1+1) steel 246 1352 1185 M22x1,5 EN286-2 60

030 352 009 C (2+1+1) steel 396 750 503 M22x1,5 EN286-2 80

030 352 209 C (2+1+1) steel 396 915 706 M22x1,5 EN286-2 100

030 360 809 C (2+1+1) steel 310 895 712 M22x1,5 EN286-2 60

030 362 009 C (2+1+1) steel 310 620 405 M22x1,5 EN286-2 40

030 362 009/12 C (2+1+1) steel 310 620 405 M22x1,5 EN286-2 40

030 363 609 C (2+1+1) steel 206 530 405 M22x1,5 EN286-2 15

030 390 109/30 C (2+1+1) steel 246 M22x1,5 EN286-2 30

030 390 709 C (2+1+1) steel 206 M22x1,5 EN286-2 20

030 402 776WB U (1+1+1+2) steel 276 760 743 M22x1,5 EN286-2 40

030 603 110WB U (1+1+1+2) steel 310 895 878 M22x1,5 EN286-2 60

030 803 996WB U (1+1+1+2) steel 396 750 733 M22x1,5 EN286-2 80

032 253 013S U (1+1+1+2) steel 246 685 M22x1,5 EN286-2 30

032 304 513S U (1+1+1+2) steel 300 700 M22x1,5 EN286-2 45

032 306 013S U (1+1+1+2) steel 300 888 M22x1,5 EN286-2 60



AIR TANKSSteel air tanks

030 350 909 030 351 209030 350 109 030 350 609030 350 209 030 350 509

030 351 609030 351 509 030 351 709 030 351 809 030 352 009 030 352 209

030 360 809 030 362 009 030 363 609 032 253 013S 032 304 513S

1

032 306 013S



Air

tan

ks

AIR TANKS

Steel air tanks

030 406 009 030 7020 600 030 7027 600030 7024 600 030 7031 000 030 7039 600

030 406 001 030 406 003 030 406 005030 406 004 030 406 007 030 406 008



AIR TANKS

Saddles for air tanks

Part

nu

mb

er

Typ

e

Ø (

mm

)

R A B E H J L P No

te

030 406 001 standard ''V-shaped'' 276 138 80 30 288 288 320 361




030 406 006 strap 152for air tank (alu)


030 406 008 italian ''V-shaped'' 396 198 80 30 45 45 444 465U bolt M8; 1 support; flat washer

030 406 009 italian ''V-shaped'' 310 155 82 30 45 45 357 382U bolt M8; 1 support; flat washer

030 7020 600 foldable ''strap'' 206 130 65 11x16 11x16 230 kit of 2





032 1500 01S standard 150 kit of 2

032 2000 01S standard 200 100 90 280 kit of 2

032 4000 01S standard 246 125 55 300 kit of 2

032 5000 01S standard 396 200 110 506 kit of 2

032 7530 01S standard 300 150 50 347 kit of 2

032 7730 00S standard 300 150 70 370 kit of 2

032 2000 01S 032 4000 01S 032 7530 01S032 5000 01S 032 7730 00S 030 406 001



AIR TANKS

Air

tan

ks

Saddles for air tanks

V-shaped Italian V-shaped

Standard Foldable strap



AIR COILS AND AIR TUBES

Air coils 24

Air tubes polyamide PA12 PHLY air tubes 26

Air tubes polyamide PA10.12 PHL air tubes 28

Air tubes elastomeric polyester 30



070 311 232 1331C 070 31123 31331C070 11122 23131 070 21123 21331C 070 21123 31331C 11968




C

DFemale swivel

m18x1,5

FMale removable

m 16x1,5

EFemale fixed

m18x1,5

GMale fix

m16 x 1,5

HMale fix long

m18 x 1,5

A

B

Air coils

Air coils with plastic colour-coded tails satisfy DIN74323 safety parameters as tested by TÜV. The coils have been tested to 10,000 articulations (ISO 7375). The tube has been approved in accordance with DIN 74324 (black) or DIN 73378 (colour).

› Working pressure: < 10 bars

› Minimum burst pressure: 57 bars

› Operating temperature : -40°C to +70°C

Part

nu

mb

er

Mat

eria

l

Co

il co

lor

Wo

rkin

g le

ng

ht

(m)

Thre

ad 1

B (

mm

)

C (

mm

)

Pro

teti

on

sp

rin

g

Thre

ad 2

Ap

plic

atio

n

070 11122 23131 PA12 PHL black 4 male M16 12x9 110black plastic

male M18general and OEM

070 21123 21331C PA12 PHL black 4 male M16 12x9 110 red plastic male M18general and OEM

070 21123 31331C PA12 PHL black 6 male M16 12x9 110 red plastic male M18 extended

070 31123 21331C PA12 PHL black 4 male M16 12x9 110yellow plastic

male M18general and OEM

070 31123 31331C PA12 PHL black 6 male M16 12x9 110yellow plastic

male M18 extended

11968 nylon tubing red4.572 (15FT)

1/2'' metal

Air coils

070 33124 45522C033 016 509 070 22124 45522C033 016 009




Air coils

Part

nu

mb

er

Mat

eria

l

Co

il co

lor

Wo

rkin

g le

ng

ht

(m)

Thre

ad 1

B (

mm

)

C (

mm

)

Pro

teti

on

sp

rin

g

Thre

ad 2

Ap

plic

atio

n

033 016 009 PA10.12 PHL yellow 4 female M18 12x9 105black plastic

female M18iron zinc plated

033 016 509 PA10.12 PHL red 4 female M18 12x9 105black plastic

female M18iron zinc plated

070 22124 45522C PA10.12 PHL red 4.72 female M18 12x9 115 metalmale M16 L15mm

drawbar

070 33124 45522C PA10.12 PHL yellow 4.72 female M18 12x9 115 metalmale M16 L15mm

drawbar

Air

co

ils a

nd

air

tu

bes

Part

nu

mb

er

Len

gth

(m

)

Co

lou

r

Mat

eria

l

Ø in

t (m

m)

Thic

knes

s (m

m)

Min

imu

m

ben

din

g r

adi-

us

(mm

)

Wo

rkin

g p

res-

sure

(b

ar)

Stan

dar

d

Dep

th m

ark

067 006 010H 1000 black PA12 PHLY 4 1 35 36 DIN74324 c/w



067 012 015H 400 black PA12 PHLY 9 1.5 70 26 DIN74324 c/w

067 015 015H 250 black PA12 PHLY 12 1.5 100 20 DIN74324 c/w

067 006 010H 067 008 010H 067 010 010H

PA12 PHLY air tubes

PA12 high-pressure monolayers air tubes are produced in accordance with DIN 74324 (black tubes) for automotive braking applications, and with DIN 73378 for automotive suspension application.

Operating temperature › From -60° C to +130°C

How to use air tubes › Cut tube in increments equal to the depth

› Insert tube into push-in fitting

› Check that end of push-in fitting touches next depth mark

Tolerance for external diameter

› From 3 mm to 10 mm: ± 0.10 mm

› From 11 mm to 20 mm: ± 0.15 mm

067 012 015H 067 015 015H




Air tubes PA12 PHLY

Our standard marking

› Grau

› DIN 74324 (black) for automotive braking applications or DIN 73378 (colour) for automotive suspension application

› External diameter

› Wall thickness

› PA12 ... (detailed specification of material)

› Manufacturer code (one letter + one number)

› Made in (country of production)

› Production information (production date / production lot)




Air tubes PA12 PHLY

Air

co

ils a

nd

air

tu

bes

Part

nu

mb

er

Len

gh

t (m

m)

Co

lor

Mat

eria

l

Ø e

xt (

mm

)

Ø in

t (m

m)

Thic

knes

s (m

m)

Min

imu

m

ben

din

g

rad

ius

Wo

rkin

g

pre

ssu

re (

bar

)

Stan

dar

dS

067 0410 110 25 black PA10.12 PHL 4 2 1 20 49 ISO7628 Cat.3



067 0610 121i 100 yellow PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3

067 0610 131i 100 red PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3

067 0610 141 100 blue PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3

067 0610 161 100 green PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3

067 0610 171 100 natural PA10.12 PHL 6 4 1 35 29 ISO7628 Cat.3




067 0810 121i 100 yellow PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3

067 0810 131i 100 red PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3

067 0810 141 100 blue PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3

067 0810 161 100 green PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3

067 0810 171 100 natural PA10.12 PHL 8 6 1 40 21 ISO7628 Cat.3



067 1012 111 100 black PA10.12 PHL 10 7.5 1.25 50 21 ISO7628 Cat.3

067 1015 110 25 black PA10.12 PHL 10 7 1 45

067 1015 111 100 black PA10.12 PHL 10 7 1 45

067 1210 111 100 black PA10.12 PHL 12 8 2 80 29

067 1215 110 25 black PA10.12 PHL 12 9 1.5 70 21 ISO7628 Cat.3




Air tubes PA10.12 PHL

067 0410 110 067 0610 110 067 0610 111 067 0610 121i

067 0610 161 067 0610 171 067 0810 110 067 0810 111

067 0810 141 067 0810 161

067 0610 131i 067 0610 141

067 1010 110 067 1010 111

067 0810 118 067 0810 121i

067 1012 111 067 1015 110

067 1015 111 067 1210 111 067 1215 110




Air tubes PA10.12 PHL

Air

co

ils a

nd

air

tu

bes

Part

nu

mb

er

Len

gh

t (m

m)

Co

lor

Mat

eria

l

Ø e

xt (

mm

)

Ø in

t (m

m)

Thic

knes

s (m

m)

Stan

dar

dS

067 1215 110_1000MM 10 black elastomeric polyester 12 9 1.5 ISO 7628:2010

067 1215 110_1010MM 10.1 black elastomeric polyester 12 9 1.5 ISO 7628:2010



067 1215 110_150MM 15 black elastomeric polyester 12 9 1.5 ISO 7628:2010








067 1215 111 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010


067 1215 121i 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010

067 1215 131i 100 black elastomeric polyester 12 9 1.5 ISO 7628:2010


067 1515 110 25 black elastomeric polyester 12 9 1.5 ISO7628 Cat.1








067 2020 111 100 black elastomeric polyester 12 9 1.5



AIR COILS AND AIR TUBESAir tubes elastomeric polyester

067 1215 111 067 1215 114 067 1215 121i 067 1215 131i 067 1420 111 067 1515 110

067 1515 111 067 1620 111067 1520 210 067 1520 211 067 1620 110 067 1820 110

067 1820 111 067 2020 111



AIR COILS AND AIR TUBESAir tubes elastomeric polyester

Air

co

ils a

nd

air

tu

bes



ACCESSORIES

Alu manifold 34

Miscellanous 35



Part

nu

mb

er

Tub

e ø

Stra

igh

t

Ch

eck

po

int

plu

g

No

te

420VM0300 8 mm & 6 mm 6 mm & 1 mm no & no 1

420VM0301 8 mm & 6 mm 6 mm no 1

980 00000 0013 8 mm 8 mm yes no elbow

420VM0300 420VM0301 980 000000 0013



ACCESSORIES

Alu manifold

024 027 609 031 001 309 032 071 409 032 072 819

032 6920 0700 032 6920 0700OR 032 6980 0600 032RID67

032OR13

032 6920 0600 032 6920 0600OR

032OR6

032 776 709T 032DMM96050



ACCESSORIES

Miscellaneous

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

Att

rib

ute

D

006 000 884_M sticker for tool case RTC

024 027 609 O-ring ECAM

025 027 109 flange seal

030 9300 000 kit protection for air tank strap 0307

031 001 309 silencer ILAS® for exhaust R1/8''

032 040 609 nipple MA16-MA12=TU6

032 071 409 fitting COLAS® valve

032 072 819 fitting COLAS® valve universal push-in ø 8 mm

032 3620 0142 plug M14x1.5 brass cup c/w O-ring

032 6920 0600 nut F: 16x1.5 H (mm): 7.5 Ch (mm): 22

032 6920 0600OR nut F: 16x1.5 H (mm): 7.5 Ch (mm): 22 c/w O-ring

032 6920 0700 nut F: 22x1.5 H (mm): 8.5 Ch (mm): 28

032 6920 0700OR nut F: 22x1.5 H (mm): 8.5 Ch (mm): 28 c/w O-ring

032 6980 0600 nut F: 16x1.5 H (mm): 6 Ch (mm): 22

032 776 709T manifold M16 7 ports

032DMM96050 steel spring tube 12 mm M16M c/w fittings

032RID67 adaptor M16x1.5 F: 22x1.5 L (mm): 8.5Ch (mm): 28

032OR13 O-ring M1/2

032OR6 O-ring M16

Acc

esso

ries



ACCESSORIES

Miscellaneous

032OR7 065 000 109 065 000 109/40 065 001 009

11150 11500 135 626 284 156 569 507

065 001 009/40 073 133 008

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

032OR7 O-ring M22

051 016 009 screw ISO 4017

054 501 209 washer

065 000 109 hose 13x25 50 m DIN 74310

065 000 109/40 hose 13x25 40 m DIN 74310

065 001 009 hose 11x18 50 m DIN 74310

065 001 009/40 hose 11x18 40 m DIN 74310

065 001 009P hose 11x18length as required; 44 m minimum

DIN 74310

073 133 008 cable ADR

11150 plug reducer

11500 flexastik

11547 hose clamp for flexastik N30200AE pack of 10

11611 hose ring

135 626 2842 pole electrical connector

female in

156 569 507 vent valve

312 364 037 flatpoint II cable 1,5 m

316 614 077 flatpoint LED trailer light white c/w 0,5 m cable

320 065 011 foot valve



ACCESSORIES

Miscellaneous

420 100 258 420 2300 102 420 56030 0204 420CAP01

420FTN005 420FTN0505 420VM0104 42593163

420CLAMP001 420FTN004

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

420 100 258 cap cap caoutchouc for test point fitting

420 2300 102 modulator valve 0.8 bar pneumatic

420 56030 0204 gasket 0.3 m

420CAP01 protection cap

420VP0107 steel bracket inox 430

4203726 fitting, miscellaneous

420CLAMP001 zip tie 200x3.6 mm

420FTN004 exhaust protection filter 1/8''

420FTN005 exhaust protection filter 1/4''

420FTN0505 filter nylon M16x1,5

420VM0104 support manometer, inox D100 ½'' gas

42593163 air connection brake chamber 2x M16

580 13115 9802 fitting manifold M12x1.5 76 mm 9 mm

580 D20 040 cylinder double effect980000111038, 980000111055, 980000111906

ø 20 mm stroke 40 mm

580 D20 040WS control cylinder ø 20 mm stroke 40 mm c/w boot

580 S20 100 cylinder simple effect 980000159002

580 D20 040WS

Acc

esso

ries



ACCESSORIES

Miscellaneous

580011

580013 580014K 580019 580023K 580024

580 S20 040SP 580001 580002 580004 580006

580027K

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

Att

rib

ute

D

580 S20 040SP cylinder

580001 3/2 way valve

580002 3/2 way valve 1/8”bi-stable c/w top lever

manual

580004 3/2 way valve 1/8”normally opened-pneumatic pilot

580006 3/2 way valve 1/8” roller lever spring return

580011 double check valve 1/8”

580013 one way flow regulator

580014K 3/2 way valve 1/8” solenoidnormally closed-spring

580019 3/2 way valve 1/8”normally closed pneumatic pilot-spring

580023K 3/2 way valve 1/8” solenoid spring return 24V

580024 5/2 way valve 1/4”normally open detented

push-pull


580028 control valve

580029 3/2 way valve 1/8”tappet operated spring return



ACCESSORIES

Miscellaneous

580042K 580044 580050 580060 580061 580062

580028 580032 580033K 580038K 580039 580040K

580065K 580066K 580067

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

Att

rib

ute

D

580032 5/2 way valve 1/4” pneumatic pilot


580038K 3/2 way valve 1/8” solenoid normally closed 24V

580039 double check valve 1/4”

580040K 3/2 way valve 1/8” solenoidnormally opened/closed

580042K 3/2 way valve 1/8” solenoidnormally opened

24V

580044 pressure gauge ø 50 mm 1/4”

580050 3/2 way valve 1/8” c/w red knob

580060 3/2 way valve 1/8” solenoid

580061 5/2 way valve 1/8” normally opened push pull

580062 5/3 way valve 1/8” pneumatic

580065K 5/2 way valve 1/4” c/w coil

580066K DC coil

580067 3/2 way valve 1/4” normally closed pneumatic pilot

580068X pressure gauge

580070 3/2 way valve 1/8

580068X 580070

Acc

esso

ries



ACCESSORIES

Miscellaneous

580071 580075K 580078 580082 580084 580085K

580086C 580090 580109 580LP1 680 002 127

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

Att

rib

ute

D

580071 3/2 way valve 1/4” normally closed 90° bi-stable

580074 5/2 way valve 24V 2w +/- 10% 1/8”

580075K 3/2 way valve 1/8” solenoidnormally opened

580078 3/2 way valve 1/8”with manual bi-stable

Electrical

580082 pressure gauge 0-10 bar

580084 3/2 way valve 1/8”normally closed/open

Pneumatic

580085K 5/2 way valve + connector complete

580086C 3/2 way valve 1/4” solenoid -40°/+100°C

580090 3/2 way valve normally closed M5 threaded

580109 5/2 way valve c/w toplever 522l 1/4” bistable

580LP1 axle lift valve

680 002 127 cable 16 m 2 cores c/w AspockSG1 connector 1 side only



ACCESSORIES

Miscellaneous

760 407 001 815 015 002 815 999 999 904 053 001 905 002 001 980 00000 0LP1

FSI20.050 N30200AE N30200AG RN55N

Part

nu

mb

er

Typ

e

Att

rib

ute

A

Att

rib

ute

B

Att

rib

ute

C

760 407 001 fitting case20 different PN of fittings for 77 fittings in total

3 different PN of RTC tools for 9 RTC tools in total

see picture for more details

815 015 002 sensor

815 999 999 sensor

904 053 001pressure regulating/setting tool

ILAS® III 352047.../ 352049.../ 352051...

905 002 001 leak detection spray

905 003 001 anti-freeze 1l

980 00000 0LP1 1st axle lift valve

FSI20.050 cylinder

N30200AE flexastik 40” c/w hose clamp

N30200AG flexastik 50” c/w hose clamp

RN55N repair kit pressure converter N4274

S21/15W hose clamp ø 21 mm

Acc

esso

ries



Double diaphragm spring brake actuators 44

Pressure converter 45

ACTUATION





ACTUATION

Double diaphragm spring brake actuators

Double diaphragm spring brake actuators

Double diaphragm cylinders are combined cylinders. The front section is dedicated to the service brake and the rear section to the spring brake. The front section is always a diaphragm type. In the rear section, the powerful spring is compressed during normal vehicle operation (driving). When parked, the pressure holding the spring in position is released. The spring then acts directly on the brake.

Part

nu

mb

er

Ver

sio

n

Push

ro

d

(mm

)

Pro

tect

ion

Yoke

Sid

e p

ort

Mo

un

tin

g

thre

ad

Bre

ath

er p

ipe

Sid

e p

ort

(d

egre

es)

Max

. o

per

atin

g

pre

ssu

re (

bar

)

Stro

ke

346 2430 001 24/30 M16x1.5 wiper c/w M16x1.5 M16x1.5 w/o +90 10 76



ACTUATION

Pressure converters

Part

nu

mb

er

Typ

e

Hyd

./ai

r ra

tio

Med

ium

Cu

bic

inch

d

isp

lace

men

t

Ap

plic

atio

n

No

te

Hyd

rau

lic

cylin

der

Ø

Pneu

mat

ic

cylin

der

Ø

Len

gth

Elec

tric

o

vers

tro

ke

ind

icat

ion

33090009 series II 16:1 brake fluid 5.0 Terex (N4185C) 1.12” 4.50” 17.25'' @ 93%

N4194 series I 23:1 brake fluid 8.8 1.25” 6.00” 22.70'' @ 75%

33090009 N4194



AIR BRAKE

Switches 46



Part

nu

mb

er

Typ

e

Port

Cu

t-in

(b

ar)

Cu

t-o

ut

(bar

)

Term

inal

s

361 006 003 pressure switch M12x1.5 male screw

361 006 201 pressure switch M12x1.5 male 0.5 spade

361 006 301 pressure switch M12x1.5 male spade




361 007 001 pressure switch M12x1.5 0.5 screw




361 007 201 pressure switch M12x1.5 0.5 spade

361 007 206 pressure switch M12x1.5 spade




Switches

Switches are used to activate electronic circuits such as pilot lights, acoustic control, electromagnetic valves etc...<br>A control switch in the brake system enables activation of the brake lights when the brakes are activated.



AIR BRAKE

Switches

361 006 201 361 006 302 361 006 305 361 006 306 361 007 001 361 007 002

361 007 104 361 007 201 361 007 301 361 007 302 361 007 305


Grau Product Catalogue Europe NOTES



BRAKE ADJUSTERS

Manual brake adjusters 52



Manual brake adjusters

Manual brake adjusters are installed as the lever linking the actuator to the camshaft, in a drum brake system. Regular manual adjustment is required to maintain a constant clearance between the brake linings and the drum.

Part

nu

mb

er

Leve

r ty

pe

No

. of

splin

e te

eth

No

. of

ho

les

Bu

shin

g

Leve

r le

ng

th

(mm

)

Ap

plic

atio

n

A B I (o

ffse

t)

Splin

e ty

pe

Mec

han

ism

KN44051 straight 28 2 1/2'' 170 MERITOR 5.0'' 6.0''SAE 1 1/2''-28 C

posi lock

KN44061 straight 28 2 1/2'' 195 MERITOR 5.5'' 6.5''SAE 1 1/2''-28 C

posi lock

KN47081 straight 10 2 1/2'' 171 USA 6.0'' 5.0''SAE 1 1/2''-10

posi lock

KN49000 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/4''-10

posi lock

KN49010 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/4''-10

posi lock

KN50000 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/2''-10

posi lock

KN50010 offset 10 2 1/2'' 5.5'' 4.5'' 15 mmSAE 1 1/2''-10

posi lock



BRAKE ADJUSTERS

Manual brake adjusters

KN44051 KN44061 KN47081





AIR DISC BRAKES

Disc brake pads 56



Part

nu

mb

er

Mar

ket

ref.

Bra

ke

ECE

R90

Len

gth

(m

m)

Hei

gh

t (m

m)

thic

knes

s (m

m)

nb

of

pad

s

191 0089 010 29087 Knorr SB/SN7 E11 90R-02A0393/32869 247 109.2 29.7 4

191 0309 010 29030 MERITOR D3/D-Elsa1 E11 90R-02A0393/32859 249.2 118 28 4

191 0889 020 29088 Wabco PAN 17 E11 90R-02A0393/32858 175.8 86 26 4

191 0959 010 29093 Knorr SB/SN6 E11 90R-02A0393/32868 210.5 92.5 29.8 4

191 1159 010 29183 Knorr SN5/SB5 E11 90R-02A0393/32860I: 173.3 O: 184.8

I: 84 O: 84

I: 26.8 O: 33.8

4

191 1229 020 29122 Brembo 2x60 E11 90R-02A0393/32857 174.8 85.4 21.8 4

191 1269 010 29126 Wabco PAN 19-1 E11 90R-02A0393/32867 210 92.4 29.7 4

191 1319 010 29131 MERITOR D-Elsa2 E11 90R-02A0393/32866 249.6 118 30 4

191 1589 010 29158Knorr SK / Knorr SB 4309T / WABCO PAN 22-1

E11 90R-02A0393/32865 210.65 108.1 29.2 4

191 1629 010 29162 Wabco Pan 22-1 Plus E11 90R-02A0393/32864 210.45 110 31.8 4

191 1659 010 29165 Knorr SB3745T (SB6) E11 90R-02A0393/32863 210.5 92.5 29.8 4

191 1679 010 29167 Knorr SB4345T (SN7) / BPW E11 90R-02A0393/32862 247 109.2 30 4

191 1719 010 29171 Knorr SB4309T (SK7) E11 90R-02A0393/32865 210.5 108 29.8 4

Disc brake pads

All pads have been through extensive testing and meet the ECE R90 standard, ensuring an original equipment quality and performance. Formulated to these standards Grau disc brake pads have been developed for aftermarket applica-tion, withstanding the rigours of heavy vehicle braking.



AIR DISC BRAKES

Disc brake pads

191 1269 010 191 1319 010 191 1589 010 191 1629 010 191 1659 010 191 1679 010

191 0089 010 191 0309 010 191 0889 020 191 0959 010 191 1159 010 191 1229 020

191 1719 010





FITTINGS

Straight male terminal-RTC 61

Straight male terminal 63

Adjustable elbow stud-RTC 65

Adjustable elbow stud 66

Adjustable tee stud-RTC 67

Adjustable tee stud 68

Adjustable tee stud with test point-RTC 69

Adjustable tee stud with test point 70

Union-RTC 71

Union 71

Tee union-RTC 72

Straight female terminal 73

Stud bulkhead terminal-RTC 73

Stud bulkhead terminal 74

Swivel elbow stud-RTC 74

Swivel elbow stud 75

Swivel stud with test point 75

Swivel tee stud 76

Swivel adaptor 77

Swivel stud 79

Swivel 80

Pivoted adaptor 82

Test point 85

Plug 86

Reducer 86

Adaptor 87

Bulkhead adaptor 89

Threaded adaptor bulkhead 90

Bulkhead elbow 91

Drain valve 91

Elbow hosetail 92

Hosetail 92

Male connector 93

Bulkhead male connector 93

Bulkhead union 94

Male elbow 94

Reinforcing insert for DIN tube 95

Stud-standpipe adaptor 95

RTC tool 96

FITTINGS





FITTINGS Straight male terminal-RTC

RTC fittings

RTC fittings offer the highest standards in safety, quality and reliability. They have been designed for use with 11/12 polyamide (Rilsan) or elastomeric polyester (Hytrel) tubing in the pneumatic circuits of truck and trailer auxiliary and braking systems. RTC is a ready-to-use safety fitting: simply insert the tubing by hand into the fitting. Estimated assembly time is 70-80 percent faster than for traditional cutting ring fittings.

› The tubing can be easily removed using a simple plastic tool

› The tubing tolerance complies with ISO 7628 and DIN 74324/73378

› The RTC operating heat range is -40°C to +100°C

› The seal under these conditions has been designed specifically for the RTC O-ring

Straight male terminal-RTC

Part numberTube ø (mm)

MH

(mm)B

(mm)L

(mm)Ch

(mm)Type

032 800 11000-RTC 6 x 4 10 x 1 19.8 7 31.3 18 A

032 800 14000-RTC 6 x 4 12 x 1.5 19.8 8 31.3 18 A

032 800 16000-RTC 6 x 4 16 x 1.5 19.8 8.5 23.5 22 B

032 800 17000-RTC 6 x 4 22 x 1.5 19.8 8.5 23.5 28 B

032 800 1G/18000-RTC 6 x 4 1/8'' 19.8 6 30.2 17 A

032 800 21000-RTC 8 x 6 10 x 1 20.5 5.5 30.4 18 A

032 800 24000-RTC 8 x 6 12 x 1.5 20.5 8 23.5 18 A

032 800 26000-RTC 8 x 6 16 x 1.5 20.5 8.5 24.4 22 B

032 800 27000-RTC 8 x 6 22 x 1.5 20.5 8.5 20.15 28 B

032 800 46000-RTC 10 x 7 16 x 1.5 24 8.5 36.45 22 A

032 800 47000-RTC 10 x 7 22 x 1.5 24 8.5 24.65 28 B

032 800 64000-RTC 10 x 8 12 x 1.5 24 8 36.45 18 A

Type A

Type B



FITTINGSFITTINGS


Fitt

ing

s


MH

(mm)B

(mm)L

(mm)Ch

(mm)Type

032 800 66000-RTC 10 x 8 16 x 1.5 24 8.5 36.45 22 A

032 800 67000-RTC 10 x 8 22 x 1.5 24 8.5 24.65 28 B

032 800 94000-RTC 12 x 9 12 x 1.5 25 8 36 22 A

032 800 95000-RTC 12 x 9 14 x 1.5 25 8 36 22 A

032 800 96000-RTC 12 x 9 16 x 1.5 25 8.5 36 22 A

032 800 97000-RTC 12 x 9 22 x 1.5 25 8.5 26.6 28 B

032 800 98000-RTC 15 x 12 16 x 1.5 27 8.5 40 28 A

032 800 99000-RTC 15 x 12 22 x 1.5 27 8.5 40 28 A

Type A

Type B



FITTINGSFITTINGS


Straight male terminal


MH

(mm)B

(mm)D

(mm)L

(mm)Ch

(mm)

032 800 12000 6 x 4 12 x 1 19.8 8 16 24.5 18

032 800 15000 6 x 4 14 x 1.5 19.8 9 - 24.5 20

032 800 1G/18000 6 x 4 1/8'' 19.8 6 16 24.5 16

032 800 G1/8000 8 x 6 1/8'' 20.5 6 18 25.5 18

032 800 21000 8 x 6 10 x 1 20.5 8 18 25.5 18

032 800 22000 8 x 6 12 x 1 20.5 8 18 25.5 18

032 800 25000 8 x 6 14 x 1.5 20.5 9 18 25.5 20

032 800 2G1/4000 8 x 6 1/4'' 20.5 6 18 25.5 20

032 800 44000 10 x 7 12 x 1.5 24 8 20 28.5 20

032 800 47000 10 x 7 22 x 1.5 24 9 20 29 28

032 800 55000 10 x 7.5 14 x 1.5 24 9 20 28.5 20

032 800 57000 10 x 7.5 22 x 1.5 24 9 20 29 28

032 800 61000 10 x 8 10 x 1 24 8 20 29.5 20

032 800 65000 10 x 8 14 x 1.5 24 9 20 28.5 20

032 800 86000 12 x 8 16 x 1.5 25 8.5 22 29.5 22

032 800 87000 12 x 8 22 x 1.5 25 9 22 29.5 28

032 800 107000 15 x 12 22 x 1.5 27 9 28 31.5 28

032 800 108000 15 x 12 16 x 1.5 27 8.5 28 33 28



FITTINGSFITTINGS


Fitt

ing

s


MH

(mm)B

(mm)D

(mm)L

(mm)Ch

(mm)

032 800 116000 16 x 12 16 x 1.5 27 8.5 28 33 28

032 800 117000 16 x 12 22 x 1.5 27 9 28 31.5 28

032 800 11G1/2000 16 x 12 1/2" 27 - 28 - 28

032 800 126000 18 x 14 16 x 1.5 27 8.5 - 41.5 30

032 800 127000 18 x 14 22 x 1.5 27 9 - 40.5 30

032 800 137000 20 x 16 22 x 1.5 27 10 - 42.5 32



FITTINGSFITTINGS


Adjustable elbow stud-RTC


M F L

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 800 16400-RTC 6 x 4 M16 x 1.5 M12 x 1.5 38.5 34 10 17 22

032 810 14400-RTC 6 x 4 M12 x 1.5 M12 x 1.5 38.9 34 10 17 17

032 810 24400-RTC 8 x 6 M12 x 1.5 M12 x 1.5 40.25 34 10 17 17

032 810 26400-RTC 8 x 6 M16 x 1.5 M12 x 1.5 40.25 34 10 17 22

032 810 27400-RTC 8 x 6 M22 x 1.5 M12 x 1.5 40.25 34 10 17 28

032 810 46400-RTC 10 x 7 M16 x 1.5 M12 x 1.5 44.2 34 10 17 22

032 810 66400-RTC 10 x 8 M16 x 1.5 M12 x 1.5 44.2 34 10 17 22

032 810 67400-RTC 10 x 8 M22 x 1.5 M12 x 1.5 44.2 34 10 17 28

032 810 94600-RTC 12 x 9 M12 x 1.5 M16 x 1.5 47 36 10 22 17

032 810 96600-RTC 12 x 9 M16 x 1.5 M16 x 1.5 47 36 10 22 22

032 810 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28

032 810 98600-RTC 15 x 12 M22 x 1.5 M16 x 1.5 50.3 36 10 22 28



FITTINGSFITTINGS

Adjustable elbow stud-RTC

Fitt

ing

s


M F L

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 810 16400 6 x 4 M16 x 1.5 M12 x 1.5 40 34 10 17 22

032 810 46400 10 x 7 M16 x 1.5 M12 x 1.5 44 34 10 17 22

032 810 107600 15 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28

032 810 117600 16 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28

032 810 127700 18 x 14 M22 x 1.5 M22 x 1.5 56 41 10 24 28

Adjustable elbow stud


M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 840 97700 12 x 9 M22 x 1.5 M22 x 1.5 49.5 39 10 24 28

032 840 117700 16 x 12 M22 x 1.5 M22 x 1.5 51.5 39 10 24 28



FITTINGSFITTINGS

Adjustable elbow stud


M F L

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 841 27600 8 x 6 M22 x 1.5 M16 x 1.5 36.1 37 10 22 28


M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 820 26400-RTC 8 x 6 M16 x 1.5 M12 x 1.5 40.25 34 10 17 22

032 820 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28

Adjustable tee stud-RTC



FITTINGSFITTINGS

Adjustable elbow stud Adjustable tee stud-RTC

Fitt

ing

s

Adjustable tee stud


M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 820 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 10 17 28

032 820 97600 12 x 9 M22 x 1.5 M16 x 1.5 47 36 10 22 28

032 820 117600 16 x 12 M22 x 1.5 M16 x 1.5 50.5 36 10 22 28


M F L

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 830 24400-RTC 8 x 6 12 x 1.5 12 x 1.5 40.25 34 10 17 17

032 830 26400-RTC 8 x 6 16 x 1.5 12 x 1.5 40.25 34 10 17 22



FITTINGSFITTINGS

Adjustable tee stud-RTCAdjustable tee stud


M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 830 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 10 17 28

Adjustable tee stud with test point-RTC


M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 823 97600-RTC 12 x 9 M22 x 1.5 M16 x 1.5 47 36 45.5 10 28 22

318 058 001-RTC 12 x 9 M16 x 1.5 M16 x 1.5 47 36 45.5 10 22 22



FITTINGSFITTINGS

Adjustable tee studAdjustable tee stud with test

point-RTC

Fitt

ing

s


M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 821 96600 12 x 9 M16 x 1.5 M16 x 1.5 47 36 45.5 10 22 22

Adjustable tee stud with test point


M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 823 27400 8 x 6 M22 x 1.5 M12 x 1.5 41 34 45.5 10 28 17

032 823 97600 12 x 9 M22 x 1.5 M16 x 1.5 47 36 45.5 10 28 22



FITTINGSFITTINGS

Adjustable tee stud with test point

Union-RTC

Part number Tube ø (mm) H (mm) L (mm)

032 850 10400-RTC 6 x 4 19.8 38

032 850 20400-RTC 8 x 6 20.5 43.6

032 850 40400-RTC 10 x 7 24 50.6

032 850 60400-RTC 10 x 8 24 50.6

032 850 90600-RTC 12 x 9 25 54.5

Union

Part number Tube ø (mm) H (mm) L (mm)

032 850 30400 9 x 6 22.5 45

032 850 40400 10 x 7 25.5 51

032 850 70400 11 x 8 25.5 51

032 850 110600 16 x 12 27 58

032 850 120600 18 x 14 27 58



FITTINGSFITTINGS

Union-RTCUnion

Fitt

ing

s

Tee union-RTC

Part number Tube ø (mm) L1 (mm) L2 (mm) Ch (mm)

032 870 10400-RTC 6 x 4 26 26 13

032 870 20400-RTC 8 x 6 28.5 26 15

032 870 60400-RTC 10 x 8 33.5 31.5 18

032 870 90600-RTC 12 x 9 36 32 18

Part number Tube ø (mm) F L1 (mm) Ch1(mm) Ch2 (mm)

032 870 60400 10 x 8 M12 x 1.5 46.5 20 19

032 870 90600 12 x 9 M16 x 1.5 50 22 22



FITTINGSFITTINGS

UnionTee union-RTC

Straight female terminal


FH

(mm)B

(mm)L

(mm)Ch

(mm)

032 808 20600 8 x 6 M16 x 1.5 20.5 10 34 22

032 808 60600 10 x 8 M16 x 1.5 24 10 38 22

032 808 90600 12 x 9 M16 x 1.5 25 10 38.5 22

Stud bulkhead terminal-RTC

Part numberTube

ø (mm)

M FD

(mm)L

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)Ch3

(mm)

032 803 27400-RTC 8 x 6 M22 x 1.5 M12 x 1.5 19 59.7 9 15 32.7 28 24 18

032 803 96600-RTC 12 x 9 M16 x 1.5 M16 x 1.5 23 69.5 8.5 16 41.5 28 28 22



FITTINGSFITTINGS

Straight female terminalStud bulkhead terminal-RTC

Fitt

ing

s

Stud bulkhead terminal


M FD

(mm)L

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)Ch3

(mm)

032 803 26400 8 x 6 M16 x 1.5 M12 x 1.5 19 60.5 9 15 45.5 22 24 18

032 803 27400 8 x 6 M22 x 1.5 M12 x 1.5 19 60.5 9 15 45.5 28 24 18

032 803 67400 10 x 8 M22 x 1.5 M12 x 1.5 19 63.5 9 15 48.5 28 24 20

032 803 96600 12 x 9 M16 x 1.5 M16 x 1.5 23 69.5 8.5 16 53.5 28 28 22

032 803 97600 12 x 9 M22 x 1.5 M16 x 1.5 23 68.5 9 15 53.5 28 28 22

Swivel elbow stud-RTC


ML

(mm)L1

(mm)L2

(mm)Ch1 (mm)

032 815 16400-RTC 6 x 4 M16 x 1.5 41.4 33 8.5 22

032 815 24400-RTC 8 x 6 M12 x 1.5 42.75 32.5 8 18

032 815 96600-RTC 12 x 9 M16 x 1.5 49.5 35 8.5 22

032 815 97600-RTC 12 x 9 M22 x 1.5 49.5 36 9 28



FITTINGSFITTINGS

Stud bulkhead terminalSwivel elbow stud-RTC


ML

(mm)L1

(mm)L2

(mm)Ch1

(mm)

032 815 16400 6 x 4 M16 x 1.5 32 32 42.5 22

032 815 24400 6 x 4 M12 x 1.5 32 31.5 42.5 18

032 815 26400 6 x 4 M16 x 1.5 32 32 42.5 22

032 815 200B 8 x 6 M12 x 1.5 32 31.5 - 18

032 815 900B 12 x 9 M12 x 1.5 36 31.5 20

032 815 94600 12 x 9 M12 x 1.5 36 31.5 50 20

032 815 117600 16 x 12 M22 x 1.5 39.5 34.5 53.5 28

Swivel elbow stud


M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 826 96600 12 x 9M16 x

1.5M16 x

1.550 35.5 8.5 48.5 22 22

Swivel stud with test point



FITTINGSFITTINGS

Swivel elbow studSwivel stud with test point

Fitt

ing

s


M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 835 96600 12 x 9 M16 x 1.5 M16 x 1.5 36 32 50 22 22

Swivel tee stud

Swivel adaptor

Part number M F L

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 715 06600 M16 x 1.5 M16 x 1.5 20 35 8.5 22 22



FITTINGSFITTINGS

Swivel tee studSwivel adaptor

Part number M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 725 04400 M12 x 1.5 M12 x 1.5 18 32.5 8 19 18

032 725 06600 M16 x 1.5 M16 x 1.5 20.5 35.5 8.5 22 22

032 725 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 22 28

Part number M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 735 04400 M12 x 1.5 M12 x 1.5 18 32.5 8 19 18

032 735 06600 M16 x 1.5 M16 x 1.5 20.5 35.5 8.5 22 22

032 735 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 22 29



FITTINGSFITTINGS

Swivel adaptor

Fitt

ing

s

Part number M FL

(mm)L1

(mm)L2

(mm)Ch1

(mm)

032 749 04600 M12 x 1.5 M16 x 1.5 20.5 35 8 20

032 749 07600 M22 x 1.5 M16 x 1.5 20.5 36.5 9 28

Part number M F L (mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 746 04600 M12 x 1.5 M16 x 1.5 20.5 35 8 22 20

Part number M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch2

(mm)

032 751 06600 M16 x 1.5 M16 x 1.5 20 40.5 8.5 35 16



FITTINGSFITTINGS

Swivel adaptor

Swivel stud

Part number M L (mm) Ch (mm) S (mm)

032 660 B01/4GAS000 1/4'' 6 20 5.5

032 66B 001/8GAS000 1/8'' 7 20 5.5

032 660 B04000 M12 x 1.5 8 20 5.5

032 660 B05000 M14 x 1.5 9 20 5.5

032 660 B06000 M16 x 1.5 8.5 22 5.5

032 660 B07000 M22 x 1.5 9 28 6

Swivel

Part number F L (mm)

032 615 B00600 M16 x 1.5 20



FITTINGSFITTINGS

Swivel studSwivel

Fitt

ing

s

Part number F L (mm) Ch (mm)

032 625 00600 M16 x 1.5 20.5 22


032 635 00600 M16 x 1.5 20.5 22

Part number F L (mm) L1 (mm) Ch (mm)

032 645 B00600 M16 x 1.5 14.5 17.5 22



FITTINGSFITTINGS

Swivel


032 646 00600 M16 x 1.5 20.5 22

Part number F L (mm) L1 (mm)

032 647 B00600 M16 x 1.5 19 20.5

Part number F L (mm)

032 649 B00600 M16 x 1.5 20.5



FITTINGSFITTINGS

Swivel

Fitt

ing

s

Pivoted adaptor

Part number M F L (mm)L1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 710 01400 M10 x 1 M12 x 1.5 31.5 9 15.5 17 14

032 710 03300 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17

032 710 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 14 17

032 710 06400 M16 x 1.5 M12 x 1.5 34 10 15.5 17 22

032 710 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 14 22

032 710 07400 M22 x 1.5 M12 x 1.5 34 10 15.5 17 28

032 710 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28

032 710 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 22 28



FITTINGSFITTINGS

Pivoted adaptor

Part number M F L (mm) L1 (mm) L2 (mm) Ch1 (mm) Ch2 (mm)

032 720 04400 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17

032 720 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 22 17

032 720 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 22 22

032 720 07400 M22 x 1.5 M12 x 1.5 34 10 15.5 17 28

032 720 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28

032 720 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 24 28


032 730 04400 M12 x 1.5 M12 x 1.5 34 10 15.5 17 17

032 730 04600 M12 x 1.5 M16 x 1.5 36 10 17.5 22 17

032 730 06600 M16 x 1.5 M16 x 1.5 36 10 17.5 22 22

032 730 07600 M22 x 1.5 M16 x 1.5 36 10 17.5 22 28

032 730 07700 M22 x 1.5 M22 x 1.5 41 10 24.5 24 28



FITTINGSFITTINGS

Pivoted adaptor

Fitt

ing

s


032 740 06600 M16 x 1.5 M16 x 1.5 34.5 10 16.5 22 22


032 742 06600 M16 x 1.5 M16 x 1.5 37 10 19 22 22

032 742 07600 M22 x 1.5 M16 x 1.5 36 10 19 22 28


032 741 06600 M16 x 1.5 M16 x 1.5 36 10 20.5 22 22

032 741 07600 M22 x 1.5 M16 x 1.5 36 10 20.5 22 28



FITTINGSFITTINGS

Pivoted adaptor

Part number M F L1 (mm) L3 (mm) L4 (mm) L5 (mm) Ch2 (mm) Ch3 (mm)

032 743 06600 M16 x 1.5 M16 x 1.5 10 38 35 20 22 16

032 743 07600 M22 x 1.5 M16 x 1.5 10 38 35 20 28 16

Test point

Part number M L (mm) L1 (mm) Ch (mm)

032 790 04000 12 x 1.5 39 9 18

032 790 06000 16 x 1.5 37 9 22

318 056 001 16 x 1.5 female 45 10.8 22

032 790 07000 22 x 1.5 37 9 28



FITTINGSFITTINGS

Pivoted adaptorTest point

Fitt

ing

s

Plug

Part number M L (mm) Ch

032 695 04000 12 x 1.5 9 18

0326956 16 x 1.5 8.5 22

0326957 22 x 1.5 8.5 28

Reducer

Part number M F L (mm) Ch (mm) Type

032 696 04400 12 x 1.5 12 x 1.5 9 17 B

032 696 06400 16 x 1.5 12 x 1.5 9 22 A

032 696 07400 22 x 1.5 12 x 1.5 8.5 28 A

032 696 A6G1/8 1/8'' 16 x 1.5 9 22 A

032 024 409 22 x 1.5 1/4”-18-NPT 8.5 28 A

032RID76LA 22 x 1.5 16 x 1.5 9 28 A

Type A

Type B

Type A Type B



FITTINGSFITTINGS

PlugReducer

Adaptor

Part number F L Ch1

032 750 0600 M16 x 1.5 22 22

032 750 0700 M22 x 1.5 26 28

Part number F L Ch

032 770 0400 M12 x 1.5 18 19

032 770 0500 M16 x 1.5 20.5 22

032 770 0700 M22 x 1.5 27.5 16



FITTINGSFITTINGS

Adaptor

Fitt

ing

s

Part number F L1 (mm) Ch2 (mm)

032 780 0500 16 x 1.5 20.5 22

Part number F L Ch

032 760 0400 M12 x 1.5 18 19

032 760 0600 M16 x 1.5 20.5 15



FITTINGSFITTINGS

Adaptor

Bulkhead adaptor

Part number M M1 FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 703 3GC14 1/4'' M18 x 1.5 M12 x 1.5 32 6 20 6 22 24

032 703 5GC14B M1/4 M16 x 1.5 - 32 6 19.5 10 20 22

032 703 076100ML M22 x 1.5 M16 x 1.5 M10 x 1 35 9 20 6 28 22

032 703 077600ML M22 x 1.5 M22 x 1.5 M16 x 1.5 39 9 24 6 28 28

032 703 079400ML M22 x 1.5 M18 x 1.5 M12 x 1.5 35 9 20 6 28 24

Part number M F1 F2L

(mm)L1

(mm)Ch1

(mm)Ch2

(mm)

032 753 07600 M22 x 1.5 M16 x 1.5 M16 x 1.5 30 24 28 28

032 753 09400 M18 x 1.5 M12 x 1.5 M12 x 1.5 26 20 22 24



FITTINGSFITTINGS

Bulkhead adaptor

Fitt

ing

s

Part number M M1 FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 703 066100M M16 x 1.5 M16 x 1.5 M10 x 1 34 8.5 20 10 22 22

032 703 067600M M16 x 1.5 M22 x 1.5 M16 x 1.5 40 8.5 24 10 28 28

032 703 07600 M22 x 1.5 M22 x 1.5 M16 x 1.5 41 9 24 10 28 28

Threaded adaptor bulkhead

Part number M M1L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)

032 GMM 67LACA M16 x 1.5 M22 x 1.5 20 25 45 - -

032 GMM 77LACA M22 x 1.5 M22 x 1.5 20 25 45 19 28



FITTINGSFITTINGS

Threaded adaptor bulkhead

Bulkhead elbow

Part number M FL

(mm)L1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)Ch3

(mm)

032 763 07600 M22 x 1.5 M16 x 1.5 20.5 24 44 - 22 28 -

032 763 06600 M16 x 1.5 M16 x 1.5 20.5 37 56 10 22 22 22

Drain valve

Part number ML

(mm)L1

(mm)Ch

(mm)Note

315 019 021 M22 x 1.5 24.5 9 28 w/o ring

315 019 031 M22 x 1.5 24.5 9 28 c/w ring

420 101 782 M22 x 1.5 22.8 9 28 automatic



FITTINGSFITTINGS

Bulkhead elbowDrain valve

Fitt

ing

s

Elbow hosetail

Part number MTube ø (mm)

032 056 909 M16 x 1.5 10

Hosetail


MD

(mm)d

(mm)L

(mm)L1

(mm)L2

(mm)Ch

(mm)

032 0326 9766 9 M16 x 1.5 11.5 10 46.5 32 8.5 22

032 697 176 12 M16 x 1.5 14.5 13 54.5 38 8.5 22

032 697 177 12 M22 x 1.5 14.5 13 51 35 8.5 28

032 699 176 13 M16 x 1.5 - - - - - -



FITTINGSFITTINGS

Elbow hosetailHosetail

Male connector


ML1

(mm)L2

(mm)Ch1

(mm)Ch2

(mm)

032 DMM 137LACP 20 M22 x 1.5 14 32 27 32

032 DMM 96LACP 12 M16 x 1.5 12 27 22 22

032 800 21/8N10 18 - - - - -

Bulkhead male connector


ML1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)Ch3

(mm)

032 PDM 107LACA 15 M22 x 1.5 46 12 20 27 27 28

032 PDM 96LACA 12 M16 x 1.5 41.5 12 20 22 22 24



FITTINGSFITTINGS

Male connectorBulkhead male connector

Fitt

ing

s


L1 (mm)

L2 (mm)

Ch1 (mm)

Ch2 (mm)

Ch3 (mm)

032 DMM IDP8LACA 12 25 44 24 22 24

Bulkhead union

Male elbow


ML1

(mm)L2

(mm)L3

(mm)Ch1

(mm)Ch2

(mm)Ch3

(mm)

032 TPG 96LACA 12 M16 x 1.5 32 20 25 17 22 32

032 TPG 137LACA 20 M22 x 1.5 42 26 25 24 32 28

032 TPG 137LACP 20 M22 x 1.5 42 26 25 24 32 28



FITTINGSFITTINGS

Bulkhead unionMale elbow

Reinforcing insert for DIN tube

Part number Tube ø (mm)

4201768 12 x 9

4201782 20 x 16

Stud-standpipe adaptor


M L1 (mm) L2 (mm) Ch (mm) Ch1 (mm)

032 ORM 97LA 12 22 x 1.5 12 29 27 22



FITTINGSFITTINGS

Reinforcing insert for DIN tubeStud-standpipe adaptor

Fitt

ing

s

RTC tool

Part number Tube ø (mm)

RT006 6 x 4

RT008 8 x 6

RT010 10 x 7; 10 x 7.5; 10 x 8

RT012 12 x 9

RT015 15 x 12; 16 x 12



FITTINGSFITTINGS

RTC tool

Innovative Vehicle Solutions www.haldex.com

Haldex develops and provides reliable and innovative solutions focused on brake and air suspension products to the global commercial vehicle industry.In 2017, the company had net sales of approximately SEK 4.4 billion and employed2,176 people.

AustriaHaldex Wien Ges.m.b.H. Vienna Tel.: +43 1 8 69 27 97 Fax: +43 1 8 69 27 97 27 E-Mail: [email protected]

Australia Haldex Brake Products Pty Ltd Victoria Tel.: +61 3 9579 7070 Fax: +61 418 170 879

BelgiumHaldex N.V. Balegem Tel.: +32 9 363 90 00 Fax: +32 9 363 90 09 E-Mail: [email protected]

BrazilHaldex do Brasil Ind. E Com. Ltda São José dos Campos Tel.: +55 12 3935 4000 E-Mail: [email protected]

CanadaHaldex Ltd Cambridge, Ontario Tel.: +1 519 621 6722 Fax: +1 519 621 3924

ChinaHaldex Vehicle Products Co. Ltd. Suzhou Tel.: +86 512 8885 5301 Fax: +86 512 8765 6066 E-Mail: [email protected]

FranceHaldex Europe SAS Weyersheim Tel.: +33 3 88 68 22 00 Fax: +33 3 88 68 22 09 E-Mail: [email protected]

GermanyHaldex Brake Products GmbH Heidelberg Tel.: +49 6 221 7030 Fax: +49 6 221 703400 E-Mail: [email protected]

HungaryHaldex Hungary Kft Szentlörinckáta Tel.: +36 29 631 400 Fax: +36 29 631 401 E-Mail: [email protected]

IndiaHaldex India Private limited Nashik Tel.: +91 253 66 99 501 Fax: +91 253 23 80 729

©2018, Haldex AB. This material may contain Haldex trademarks and third party trademarks, trade names, corporate logos, graphics and emblems which are the property of their respective companies. The contents of this document may not be copied, distributed, adapted or displayed for commercial purposes or otherwise without prior written consent from Haldex.

006

700

073_

EN /1

1.18

/Hal

dex

EU

R

ItalyHaldex Italia Srl. Lissone Tel.: +39 039 47 17 02 Fax: +39 039 27 54 309 E-Mail: [email protected]

KoreaHaldex Korea Ltd. Seoul Tel.: +82 2 2636 7545 Fax: +82 2 2636 7548

MexicoHaldex de Mexico S.A. De C.V. Monterrey Tel.: +52 81 8156 9500

PolandHaldex Sp. z.o.o. Praszka Tel.: +48 34 350 11 00 Fax: +48 34 350 11 11 E-Mail: [email protected]

RussiaOOO “Haldex RUS” Moscow Tel.: +7 495 747 59 56 Fax: +7 495 786 39 70 E-Mail: [email protected]

SpainHaldex España S.A. Granollers Tel.: + 34 93 84 07 239 Fax: + 34 93 84 91 218 E-Mail: [email protected]

SwedenHaldex Brake Products AB Landskrona Tel.: +46 418 47 60 00 Fax: +46 418 47 60 01 E-Mail: [email protected]

United KingdomHaldex Ltd. Newton Aycliffe Tel.: +44 1325 310 110 Fax: +44 1325 311 834 E-Mail: [email protected]

Haldex Brake Products Ltd. MIRA Technology Park Tel: +44 2476 400 300 Fax: +44 2476 400 301 E-Mail: [email protected]

USAHaldex Brake Products Corp. Kansas City Tel.: +1 816 891 2470 Fax: +1 816 891 9447 E-Mail: [email protected]

Documents

Europe - haldex.com · Durable and reliable, Grau products are thoroughly tested for compliance with Haldex standards and come with a full warranty. ... 4 2 CONTENTS Europe System