EUROGLAS ESG Flat Solar and tempered safety glass with a unique flatness

EUROGLAS ESG Flat – safety with slender structures too

EUROGLAS ESG Flat is manufactured in series produc-tion on two pre-cut lines and a tempering furnace.The self-manufactured basic glass, EUROFLOAT, and the extra-white EUROWHITE NG with a light transmis-sion value of 91.5% are processed here.There are four different machining possibilities: rec-tangle glass pre-cut, edge grinding, hole drilling, tem-pering. The machining and thermal treatment of glass panes is possible from a thickness of 2 mm.

Advantages of EUROGLAS ESG Flat• Thermally treated glass has a higher bending

strength and is thus more resistant to impact, shock and hail than normal float glass.

• Low warpage of the tempered glass.• Very high quality drilling of holes at several

positions in the glass.

ContactEuroglas GmbH, D- 39340 HaldenslebenPhone +49 3904 638 0, Fax +49 3904 638 11 00info@euroglas.comwww.euroglas.com

Mar

ketin

g: E

urog

las

GmbH

2/2

017

Glass thickness

Glass type Dimensions Hole drilling Ø Egde Corner

Minimum Maximum Minimum Maximum2-8 mm Untempered 550 mm 2.600 mm 8 mm 50 mm KG; KGS; KGN Ground off2-8 mm HSG/ TSG/

TTG*550 mm 1.700 -

2.600 mm8 mm 50 mm KGS; KGN Ground off

* TTG – thermally treated glass in a thickness of 2 mm only; special formats after consultation; panes can be separated by powder, paper and cord; TSG manufactured according to EN12150, HSG according to EN 1863, glass edges according to DIN 1249.

Cut edge(KG) Arrissed edge (KGS) Ground edge (KGN)

Usage• Front and rear glass in PV modules• Solar heat• Greenhouses and botanical gardens• Pre-products for insulating glass units

Technical data:

Edge machining: