Upload
martincary
View
216
Download
0
Embed Size (px)
Citation preview
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 1/29
® C15 ACERT ™ 403 bkW / 540 bhp
2100 rpm
Industrial
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)Stroke.................................................... 171.4 mm (6.75 in)Displacement.......................................... 15.2 L (927.56 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio....................................................... 18:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb)........ 1332 kg, 2937 lb
FEATURES
Emissions
Meets Tier 3, Stage IIIA emission requirements. Tier 3refers to EPA (U.S.) standards. Stage IIIA refers toEuropean standards.
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, and
flywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service
every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web Site
For all your industrial power requirements, visitwww.cat-industrial.com.
7 August 2006 1:31 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 2/29
®
C15 ACERT ™ INDUSTRIAL ENGINE
403 bkW (540 bhp)
STANDARD ENGINE EQUIPMENT
Air Inlet System
ATAAC
Turbocharged
Control System
Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limitElectronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4
Cooling System
Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet
Exhaust System
Exhaust manifold, dryOptional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology
Lube System
Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)
General
Paint, Caterpillar YellowVibration damperLifting eyes
2 7 August 2006 1:31 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 3/29
®
C15 ACERT ™ INDUSTRIAL ENGINE
403 bkW (540 bhp)
PERFORMANCE CURVES
IND - C (Intermittent) - DM7520-00
TorqueN•m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N•m BSFC g/kW-hr Fuel Rate L/hr
2100 403 1832 227.7 109.4
2000 403 1924 226.5 108.8
1900 403 2025 225 108.1
1800 403 2138 223.5 107.4
1700 398 2236 222 105.3
1600 390 2325 220.8 102.5
1500 378 2404 219.7 98.9
1400 362 2466 218.7 94.2
1300 331 2434 218.1 86.1
1200 268 2134 217.3 69.5
1100 242 2102 215.9 62.3
3 7 August 2006 1:31 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 4/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 5/29
® C18 ACERT ™ 470 bkW / 630 bhp
2100 rpm
Industrial
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement....................................... 18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)
FEATURES
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables
Caterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service
every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web Site
For all your industrial power requirements, visitwww.cat-industrial.com.
2 November 2006 3:13 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 6/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
470 bkW (630 bhp)
STANDARD ENGINE EQUIPMENT
Air Inlet System
Turbocharged Aftercooled -- 429-470 bkW (575-630
bhp)Twin Turbocharged Aftercooled -- 522-597 bkW(700-800 bhp)ATAAC
Control System
Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limit
Electronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4
Cooling System
Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet
Exhaust System
Exhaust manifold, dryOptional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology
Lube System
Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)
General
Paint, Caterpillar YellowVibration damperLifting eyes
2 2 November 2006 3:13 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 7/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
470 bkW (630 bhp)
PERFORMANCE CURVES
IND - C (Intermittent) - DM7699-01
TorqueN•m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N•m BSFC g/kW-hr Fuel Rate L/hr
2100 470 2137 233.8 131.0
2000 470 2244 229.9 128.8
1900 470 2362 224.5 125.8
1800 470 2493 218.9 122.6
1700 465 2611 214.5 118.8
1600 455 2714 212.5 115.2
1500 441 2807 211.4 111.1
1400 422 2879 210.7 106.0
1300 387 2842 210.3 97.0
1200 309 2457 211.3 77.8
1100 258 2243 214.4 66.0
3 2 November 2006 3:13 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 8/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
470 bkW (630 bhp)
RATINGS AND CONDITIONS
IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic (time at full
load not to exceed 50%).
Engine Performance Diesel Engines — 7 liter andhigher
All rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.
Engine Dimensions
(1) Length 1388.2 mm
(2) Width 920.7 mm
(3) Height 1243.1 mm
Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2588747 ).
Performance Number: DM7699-01
Feature Code: C18DI01
Materials and specifications are subject to change without notice.
8678268
© 2006 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE™ trade dress, as well as corporate and product identityused herein, are trademarks of Caterpillar and may not be used without
permission.
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 9/29
® C18 ACERT ™ 522 bkW / 700 bhp
2100 rpm
Industrial
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement....................................... 18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)
FEATURES
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables
Caterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service
every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web Site
For all your industrial power requirements, visitwww.cat-industrial.com.
17 August 2006 6:37 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 10/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
522 bkW (700 bhp)
STANDARD ENGINE EQUIPMENT
Air Inlet System
Turbocharged Aftercooled -- 429-470 bkW (575-630
bhp)Twin Turbocharged Aftercooled -- 522-597 bkW(700-800 bhp)ATAAC
Control System
Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limit
Electronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4
Cooling System
Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet
Exhaust System
Exhaust manifold, dryOptional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology
Lube System
Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)
General
Paint, Caterpillar YellowVibration damperLifting eyes
2 17 August 2006 6:37 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 11/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 12/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
522 bkW (700 bhp)
RATINGS AND CONDITIONS
IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic (time at full
load not to exceed 50%).
Engine Performance Diesel Engines — 7 liter andhigher
All rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.
Engine Dimensions
(1) Length 1409.3 mm
(2) Width 974.0 mm
(3) Height 1256.1 mm
Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2621427 ).
Performance Number: DM7700-01
Feature Code: C18DI02
Materials and specifications are subject to change without notice.
7657637
© 2006 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," aswell as corporate and product identity used herein, are trademarks of
Caterpillar and may not be used without permission.
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 13/29
® C18 ACERT ™ 448 bkW / 600 bhp
2100 rpm
Industrial
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement.............................................. 18.1 L, 1106 in³Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)Length................................................1388.2 mm (54.65 in)Width....................................................920.7 mm (36.25 in)Height................................................ 1243.1 mm (48.94 in)
FEATURES
Emissions
Meets Tier 3, Stage IIIA emission requirements. Tier 3refers to EPA (U.S.) standards. Stage IIIA refers toEuropean standards.
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, and
flywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service
every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web Site
For all your industrial power requirements, visitwww.cat-industrial.com.
23 December 2005 2:45 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 14/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
448 bkW (600 bhp)
STANDARD ENGINE EQUIPMENT
Air Inlet System
Turbocharged Aftercooled -- 429-470 bkW (575-630
bhp)Twin Turbocharged Aftercooled -- 522-597 bkW(700-800 bhp)ATAAC
Control System
Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limit
Electronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4
Cooling System
Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet
Exhaust System
Exhaust manifold, dryOptional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology
Lube System
Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)
General
Paint, Caterpillar YellowVibration damperLifting eyes
2 23 December 2005 2:45 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 15/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
448 bkW (600 bhp)
PERFORMANCE CURVES
IND - B - DM8169-00
TorqueN•m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N•m BSFC g/kW-hr Fuel Rate L/hr
2100 448 2035 225.3 120.2
2000 448 2137 223.5 119.2
1900 448 2249 219.3 117.0
1800 448 2374 214.7 114.5
1700 443 2486 211.4 111.5
1600 433 2584 211.5 109.2
1500 420 2673 212.5 106.4
1400 402 2742 212.9 102.0
1300 368 2706 211.1 92.7
1200 294 2340 209.1 73.3
1100 246 2136 208.1 61.0
3 23 December 2005 2:45 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 16/29
®
C18 ACERT ™ INDUSTRIAL ENGINE
448 bkW (600 bhp)
RATINGS AND CONDITIONS
IND - B For service where power and/or speed arecyclic (time at full load not to exceed 80%).
Engine Performance Diesel Engines — 7 liter andhigher
All rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.
Engine Dimensions
(1) Length
(2) Width
(3) Height
See page1-Specificationsfor Dimensions
Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # null ).
Performance Number: DM8169-00
Feature Code: C18DI03
Materials and specifications are subject to change without notice.
5959430
© 2005 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," aswell as corporate and product identity used herein, are trademarks of
Caterpillar and may not be used without permission.
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 17/29
® C27 ACERT ™ 653 bkW / 875 bhp
2100 rpm
Engine
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSVee 12 Cylinder, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)Stroke...................................................... 152.4 mm (6.0 in)Displacement..................................... 27.03 L (1,649.47 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)
FEATURES
Emissions
Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web SiteFor all your industrial power requirements, visitwww.cat-industrial.com.
20 March 2007 5:09 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 18/29
®
C27 ACERT ™ Engine
653 bkW (875 bhp)
STANDARD ENGINE EQUIPMENT
Air Inlet System
Turbocharged Air to Air Aftercooled
Control System
Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limitElectronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4
Cooling System
Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet
Exhaust System
Exhaust manifold, dryOptional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology
Lube System
Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)
General
Paint, Caterpillar YellowVibration damperLifting eyes
2 20 March 2007 5:09 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 19/29
®
C27 ACERT ™ Engine
653 bkW (875 bhp)
PERFORMANCE CURVES
IND - B - DM9038-00
TorqueN•m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N•m BSFC g/kW-hr Fuel Rate L/hr
2100 653 2968 206.6 160.8
2000 653 3117 202.9 157.8
1900 653 3281 200.3 155.8
1800 653 3463 198.3 154.3
1700 646 3628 197.7 152.2
1600 632 3771 197.9 149.1
1500 613 3900 199.9 146.0
1400 586 4000 201.8 141.1
1300 538 3949 202.6 129.8
3 20 March 2007 5:09 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 20/29
®
C27 ACERT ™ Engine
653 bkW (875 bhp)
RATINGS AND CONDITIONS
IND - B For service where power and/or speed arecyclic (time at full load not to exceed 80%).
Engine Performance Diesel Engines — 7 liter andhigher
All rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.
Engine Dimensions
(1) Length 1917.1 mm
(2) Width 1464.3 mm
(3) Height 1320.6 mm
Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2823892 ).
Performance Number: DM9038-00
Feature Code: C27DI01 Arr. Number: 2520148
Materials and specifications are subject to change without notice.
9607603
© 2007 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE trade dress, as well as corporate and product identity
used herein, are trademarks of Caterpillar and may not be used withoutpermission.
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 21/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 22/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 23/29
®
C32 ACERT ™ INDUSTRIAL ENGINE
709 bkW (950 bhp)
PERFORMANCE CURVES
IND - B - DM9030-00
TorqueN•m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N•m BSFC g/kW-hr Fuel Rate L/hr
3 14 November 2008 4:40 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 24/29
®
C32 ACERT ™ INDUSTRIAL ENGINE
709 bkW (950 bhp)
PERFORMANCE CURVES
IND - B - DM9030-00
EngineTorque
lb•ft
EnginePower bhp
BSFClb/bhp-hr
Engine Speed rpm
English
Engine Speedrpm
Engine Powerbhp
Engine Torquelb•ft
BSFC lb/bhp-hr Fuel Rategal/hr
4 14 November 2008 4:40 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 25/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 26/29
® C32 ACERT 839 bkW / 1125 bhp
2100 rpm
Industrial
Image shown may not reflectactual engine
CATERPILLAR ENGINE
SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel
Bore....................................................... 145.0 mm (5.71 in)Stroke.................................................... 162.0 mm (6.38 in)Displacement....................................... 32.1 L (1,958.86 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)
FEATURES
Emissions
Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.
Worldwide Supplier Capability
Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings
- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.
Testing
Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model
Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.
Full Range of Attachments
Wide range of bolt-on system expansion attachments,factory designed and tested.
Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network
More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service
every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options
Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products
Web Site
For all your industrial power requirements, visitwww.cat-industrial.com.
11 March 2008 2:27 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 27/29
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 28/29
®
C32 ACERT INDUSTRIAL ENGINE
839 bkW (1125 bhp)
PERFORMANCE CURVES
IND - C (Intermittent) - DM9031-00
Torque N m
EnginePower kW
BSFCg/kW-hr
Engine Speed - rpm
Metric
Engine Speedrpm
Engine PowerkW
Torque N m BSFC g/kW-hr Fuel Rate L/hr
2100 839 3815 214.7 214.7
2000 839 4006 210.6 210.6
1900 839 4217 209.7 209.8
1800 839 4451 207 207.0
1700 830 4662 204.7 202.6
1600 812 4846 203.6 197.1
1500 787 5010 203.1 190.5
1400 754 5143 202.4 181.9
1300 691 5076 202.2 166.6
1200 599 4764 204.6 146.0
1100 512 4448 205.8 125.7
3 11 March 2008 2:27 AM
8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP
http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 29/29
®
C32 ACERT INDUSTRIAL ENGINE
839 bkW (1125 bhp)
RATINGS AND CONDITIONS
IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic (time at full
load not to exceed 50%).
Engine Performance Diesel Engines 7 liter and higherAll rating conditions are based on SAE J1995, inlet air
standardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.
Engine Dimensions
(1) Length 1914.4 mm
(2) Width 1478.7 mm
(3) Height 1319.2 mm
Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2833535 ).
Performance Number: DM9031-00
Feature Code: C32DI02 Arr. Number: 2638150
Materials and specifications are subject to change without notice.
11699832
© 2008 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,