EU-type examination certificate UK/0126/0095 Revision 16

UK/0126/0095

MI-008

Issue Date: Valid Until:

22 July 2020 21 July 2030

Grégory Glas Lead Technical Manager For and on behalf of the Head of Technical Services

0135

NMO I Stanton Avenue I Teddington I TW11 OJZ I United Kingdom Tel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I Web www.gov.uk/government/organisations/office-for-product-safety-and-standards

NMO is part of the Office for Product Safety and Standards within the Department for Business, Energy & Industrial Strategy

EU-type examination certificate UK/0126/0095 Revision 16 Issued by NMO Notified Body Number 0126 In accordance with the requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU, this EU-type examination certificate has been issued to:

Stanley Black & Decker Inc. New Britain Plant 600 Myrtle Street New Britain, CT. 06053 U.S.A In respect of: Material measure of length Accuracy class: II Nominal length and width: 5 m x 25 mm Additional models, lengths and widths are described in section 7 of the Descriptive Annex to this certificate. The necessary data (principal characteristics, alterations, securing, functioning etc) for identification purposes, including alternative models and conditions (when applicable), are set out in the descriptive annex to this certificate. This revision replaces previous versions of the certificate.

2

Descriptive Annex 1 REGULATIONS The measuring instrument in respect of which this certificate of EU-type examination certificate has been issued is subject to the provisions and requirements of the Measuring Instruments Regulations 2016 (S.I. 2016 No. 1153) which implement, in the United Kingdom, Council Directive 2014/32/EU.

2 DESCRIPTION OF THE PATTERN The pattern is a small composite measure, model type 9N33514. The blade, which is 5 m long with a nominal width of 25 mm, is made of steel and has a sliding hook at the free end. It has black and red markings on a yellow background protected by a clear film. The blade is graduated in millimetres throughout, on both edges; half-centimetres are also marked. The centimetre intervals are numbered consecutively throughout and the decimetre numbers are marked in yellow on a red background. The first part of the blade is shown in the illustration (Figure 1).

3 TECHNICAL DATA (a) Accuracy class: II (b) Nominal length: 5 m (c) Scale interval: 1 mm

4 INSCRIPTIONS The following inscriptions are marked on the front face of the blade within the first 20 cm:

(a) Nominal length: 5m (b) Manufacturer’s identification: STANLEY (c) Class of accuracy: II (d) EC type approval certificate number: UK/0126/0095

5 APPROVAL CONDITIONS The certificate is issued subject to the following conditions. 5.1 Legends and inscriptions

5.1.1 The following markings and inscriptions are durably and legibly marked onto the blade of the tape measure; and fulfil the requirements of Paragraph 9 of Annex I of the Directive 2014/32/EU.

‘CE’ mark Supplementary metrology mark Notified Body number Accuracy class Manufacturers mark or name and postal address Certificate number Tractive force (if applicable) Reference temperature (if other than 20°C)

5.1.2 The blade may be fitted into a case (Figure 2) bearing the inscription “PowerLock” and identification no. 33-514. The case may be fitted with a belt hook.

6 LOCATION OF MARKS 6.1 The inscriptions in section 4 together with the ‘CE’ marking, supplementary metrology marking and notified body number are printed on the blade near the beginning. An example of the markings is shown in Figure 1.

3

7 AUTHORISED ALTERNATIVES 7.1 Having alternative blade dimensions and case models as detailed in Table 1 below:

Nominal Length (m)

Nominal Width (mm) Case Model Case ID Figure No.

8 25 PowerLock 33-527 3 10 25 PowerLock 33-532 4 5 32 FatMax 33-720 5 8 32 FatMax 33-728 6 10 32 FatMax 33-811 7 5 32 FatMax XTREME 33-887 8 8 32 FatMax XTREME 33-892 9 10 32 FatMax XTREME 33-897 10 5 32 FatMax 36-003 - 8 32 FatMax 36-004 - 10 32 FatMax 36-005 -

Table 1 7.1.1 The models are identified by the model type reference 9Nxxxxx, where xxxxx is the case identification. 7.1.2 The cases are marked, on the rear face, with Imperial measurement markings (inches and abbreviations) which are not an element of this certification.

7.2 Having alternative models which have a dual graduated blade. The blade is graduated in millimetres throughout on the lower edge, and Imperial graduations on the upper edge. The imperial graduations have been taken in to consideration as ‘supplementary indications’. Approval under this Certification is limited to the metric graduations only. The alternative blades, with dimensions and case models are detailed in Table 2 below.

Nominal Length (m) / (ft)


8 / 26 25 PowerLock 33-428 11 8 / 26 25 PowerLock 33-526 12 10 / 33 25 PowerLock 33-531 13 5 / 16 32 FatMax 33-719 14 8 / 26 32 FatMax 33-726 15 10 /33 32 FatMax 33-805 16 5 / 16 32 FatMax XTREME 33-886 17 8 / 26 32 FatMax XTREME 33-891 18 10 /33 32 FatMax XTREME 33-896 19 5 / 16 25 PowerLock 33-515 22 8 / 26 32 Autolock 36-051 - 5 / 16 32 FatMax 36-006 - 8 / 26 32 FatMax 36-007 - 10 /33 32 FatMax 36-008 -

Table 2 7.2.1 The models are identified by the model type reference 9Nxxxxx, where xxxxx is the case identification. 7.2.2 The cases are marked, on the rear face, with Imperial measurement markings (inches and abbreviations) which are not an element of this certification. 7.2.3 Examples of the blade markings are shown in Figures 20 and 21. 7.2.4 Having the alternative labels (Figure 29) for the following models: 33-887 5m; 33-892 8m; 33-897 10m; 33-886 5m/16’; 33-891 8m/26’; 33-896 10m/33’

4

7.3 Having an alternative model, as detailed in Table 3 below, with the manufacturer’s alternative identification of DeWALT marked on the front face of the blade within the first 20 cm, in place of STANLEY. Nominal Length

(m) / (ft) Nominal Width

(mm) Case Model Case ID DWHT Figure No.

5 / 16 32 DEWALT 33-654 36 8 / 26 32 DEWALT 33-388 23 8 / 26 32 DEWALT 33-662 31 8 / 26 32 DEWALT 33-991 37 10 / 33 32 DEWALT 33-663 32 10 / 33 32 DEWALT 33-993 38

Table 3 7.3.1 The cases are marked, on the rear face, with Imperial measurement markings (inches and abbreviations) which are not an element of this certification. 7.3.2 An example of a new design sliding hook for 33-662 and 33-663 is shown in Figure 30. 7.3.3 Having an alternative lower profile sliding hook for 33-654, 33-662, 33-991, 33-663 and 33-993, shown in figure 35. 7.3.4 Having an alternative case design for 33-654, 33-991 and 33-993 as shown in figures 36, 37 and 38. 7.3.5 Having an alternative model, as detailed in Table 4 below. The Case style ID is marked on the blade. The case has a case dimension marking on the rear face, with Imperial measurement markings (inches) which are not an element of this certification


Nominal Width (mm)

Case Model Case ID DWHT

Figure No

8 / 26 32 DEWALT 36226 38 Table 4

7.4 Having the manufacturer’s alternative identification for the model type reference 9Nxxxxx, where xxxxx is the case identification, as detailed in Table 5 below:

Old BCPS PIN SAP PIN Old BCPS PIN SAP PIN 9N33514B 1-33-514 9N33428R 33-428 9N33514R 0-33-514 9N33526R 0-33-526 9N33527B 1-33-527 9N33531U 0-33-531 9N33527R 0-33-527 9N33532E 0-33-532

9N33720R 0-33-720 9N33719R 0-33-719 9N33728R 0-33-728 9N33726E 0-33-726 9N33811R 0-33-811 9N33805U 0-33-805

9N33887B 1-33-887 9N33886E 0-33-886 9N3388E 0-33-887 9N33886U 5-33-886 9N3392B 1-33-892 9N33891L 33-891L 9N3392E 0-33-892 9N33891U 5-33-891 9N3397B 1-33-897 9N33896U 5-33-896 9N3397E 0-33-897

0-33-515 0-33-388

Table 5

5

7.5 Having the rivets of the hook end modified to accept a magnetic end fitting (Figure 24). The colour of the magnetic end fitting may be red or black. The modification applies to the models of tape measure as detailed in Table 6 below. The cases for these models are marked, on the rear face, with Imperial measurement markings (inches and abbreviations) which are not an element of this certification. The cases have the labels as shown in figure 25.

Model designation Identification Nominal length Nominal width (mm) FatMax magnetic FMHT0-33863 5 m / 16 ft 32 FatMax magnetic FMHT0-33864 5 m 32 FatMax magnetic FMHT0-33866 8 m / 26 ft 32 FatMax magnetic FMHT0-33868 8 m 32

Table 6 7.6 Having an alternative design of “Powerlock” tape case, as detailed in Table 7 below.



8 25 PowerLock 33-168 27 10 25 PowerLock 33-448 28

10 / 33 25 PowerLock 33-463 29

Table 7 7.7 Having the slidelocks, fitted to the tape case(s), manufactured in any colour. 7.8 Having the rivets of the hook end modified to accept a removable magnetic end fitting (Figure 33). The colour of the magnetic end fitting may be red or black. An alternative interchangeable hook may be fitted. The modification applies to the models of tape measure as detailed in Table 8 below. The cases for these models are marked, on the rear face, with Imperial measurement markings in inches which are not an element of this certification. An example of the case model with alternative interchangeable hook is shown in figure 34.

Model designation

Identification Nominal length

Nominal width

Case Model

Case ID

Interchangeable attachment

FatMax Autolock XTHT-33671 5 m 32 mm Autolock 33-671 Fathook FatMax Autolock XTHT-33503 5 m / 16 ft 32 mm Autolock 33-503 Fathook FatMax Autolock XTHT-33501 8 m 32 mm Autolock 33-501 Fathook FatMax Autolock XTHT-33504 8 m / 26 ft 32 mm Autolock 33-504 Fathook

Table 8 7.9 Having the following models with high visibility mylar blades an example is shown in figure 37:

Model designation Identification Nominal length Nominal width Case ID FatMax XTHT0 5 m 32 mm 36003 FatMax XTHT0 8 m 32 mm 36004 FatMax XTHT0 10 m 32 mm 36005 FatMax XTHT0 5 m / 16 ft 32 mm 36006 FatMax XTHT0 8 m / 26 ft 32 mm 36008 FatMax XTHT0 8 m / 26 ft 32 mm 36032

Table 9

6

7.9.1 The cases for these models may be marked, on the rear face, with Imperial measurement markings in inches which are not an element of this certification.

7.10 Having the following model with the example shown in Figure 39

Model designation Identification Nominal length Nominal width Case ID FatMax Next Gen FMHT 8 m / 26 ft 32 mm 36326

Table 10 7.10.1 The cases for these models may be marked, on the rear face, with Imperial measurement markings in inches which are not an element of this certification.

7.11 Having the following models with the examples shown in Figure 40.

Model designation Identification Nominal length Nominal width Case ID FatMax Next Gen FMHT0 5 m 32 mm 36318 FatMax Next Gen FMHT0 5 m / 16 ft 32 mm 36317 FatMax Next Gen FMHT0 8 m 32 mm 36327 FatMax Next Gen FMHT0 10 m / 33 ft 32 mm 36336 FatMax Next Gen FMHT0 10 m 32 mm 36337


7.12 Having the following models.

Model designation Identification Nominal length Nominal width Case ID DeWalt Premium DWHT0-36114 5 m 32 mm 33654 DeWalt Premium DWHT0-36115 8 m 32 mm 33991 DeWalt Premium DWHT0-36116 10 m 32 mm 33993


7

8 ILLUSTRATIONS

Figure 1 Example of the Blade Figure 2 Case Model 33-514 Figure 3 Case Model 33-527 Figure 4 Case Model 33-532 Figure 5 Case Model 33-720 Figure 6 Case Model 33-728 Figure 7 Case Model 33-811 Figure 8 Case Model 33-887 Figure 9 Case Model 33-892 Figure 10 Case Model 33-897 Figure 11 Case Model 33-428 Figure 12 Case Model 33-526 Figure 13 Case Model 33-531 Figure 14 Case Model 33-719 Figure 15 Case Model 33-726 Figure 16 Case Model 33-805 Figure 17 Case Model 33-886 Figure 18 Case Model 33-891 Figure 19 Case Model 33-896 Figure 20 Example of the Fat Max Blade Figure 21 Example of the Fat Max

XTREME Blade Figure 22 Case Model 33-515

Figure 23 Case Model 33-388 Figure 24 Magnetic end fitting Figure 25 Alternative labels for Magnetic

case models Figure 26 Case Model 33-168

Figure 27 Case Model 33-448 Figure 28 Case Model 33-463 Figure 29 Alternative labels for X-treme

case models Figure 30 Example of a new sliding hook design

Figure 31 Case Model 33-662 Figure 32 Case Model 33-663 Figure 33 Magnetic hook and Fathook Figure 34 Case Model Autolock Figure 35 Alternative lower profile sliding

end hook for: 33-654, 33-662, 33-991, 33-663 and 33-993

Figure 36 Alternative DEWALT design for Case Model: 33-654, 33-991 & 33-993

Figure 37 High Visibility Mylar tape blade example

Figure 38 Alternative DEWALT design, example of Case Model: 36226

Figure 39 FatMax Next Gen FMHT0 design, example of Case Model: 36326

Figure 40 FatMax Next Gen FMHT0 design examples of Cases

8

9 CERTIFICATE HISTORY

ISSUE NO. DATE DESCRIPTION UK/0126/0095 22 December 2010 Type approval first issued. UK/0126/0095 Revision 1 14 January 2011 Addition of section 7.2 and figures 11 to

21 UK/0126/0095 Revision 2 08 December 2011 Addition of model 33-515 to section 2

Table 2. Addition of sections 7.2.3, 7.3, & 7.4, and figures 22 & 23.

UK/0126/0095 Revision 3 19 April 2012 Addition of section 7.5, and figures 24 & 25

UK/0126/0095 Revision 4 09 July 2012 Addition of: text to section 7.5: “The colour of the magnetic end

fitting may be red or black”, “An example of the case is shown in

Figure 25.” Addition of section 7.6 and figures 26 to 29

UK/0126/0095 Revision 5 28 January 2013 Figure 25 is deleted, and figures 26 - 29 renumbered accordingly

Amendment to Section 7.5, Text:“An example of the case is shown in Figure 25.”

is replaced by “The cases have the labels as shown in

figure 25”. Amendment to Table 5: Text “FMHT0-

33865” in amended to “FMHT0-33864”. Addition of section 7.2.4 and Figure 29

UK/0126/0095 Revision 6 13 June 2014. Addition of model numbers 33-662 and 33-663 in section 7.3, table 3.

Addition of section 7.3.1 and 7.3.2.

Addition of figures 30, 31 and 32.

UK/0126/0095 Revision 7 13 August 2014 Addition of section 7.8 and figures 33 and 34.

UK/0126/0095 Revision 8 08 October 2014 Addition of section 7.3.3 and figure 35.

UK/0126/0095 Revision 9 02 December 2014 Addition of alternative model numbers in section 7.3 and section 7.3.3 (33-654, 33-991 and 33-993).

Addition of section 7.3.4 and figure 36 UK/0126/0095 Revision 10 15 October 2015 Addition of alternative model numbers

36-003, 36-004 and 36-005 in table 1 Addition of alternative model numbers

36-06, 36-007, 36-008 and 36-051 in table 2

9

UK/0126/0095 Revision 11 25 February 2016 Addition of section 7.9 and figure 37

UK/0126/0095 Revision 12 03 May 2017 Font page: National Measurement and Regulation Office changed to NMO Addition of reference to section 7

References to: • 2004/22/EC changed to

2014/32/EU, and • UK Regulations amended in

section 1. Addition of: • Manufacturer’s postal address in

section 5.1.1. • Section 7.3.5, subsequent table

numbers are amended accordingly,

• Figure 38 UK/0126/0095 Revision 13 18 January 2018 Addition of Section 7.10 and Figure 39

UK/0126/0095 Revision 14 13 June 2018 Addition of Section 7.11 and Figure 40

UK/0126/0095 Revision 15 06 August 2018 Addition of model 36317 with nominal length 5 m/16 ft in Table 11 and Figure 40.

UK/0126/0095 Revision 16 22 July 2020 Addition of Section 7.12. Certificate renewed for a further 10

years.

10

Figure 1: Example of the Blade

Figure 2: Case Model 33-514






11


Figure 9 : Case Model 33-892


Figure 11 Case Model 33-428




12






13

Figure 20 Example of the Fat Max Blade

Figure 21 Example of the Fat Max XTREME Blade



14

Figure 24 Magnetic end fitting

FMHT0-33864 FMHT33866 FMHT0-33868 FMHT33869

Figure 25 Alternative labels for Magnetic case models

Figure 26

Case Model 33-168 Figure 27

Case Model 33-448 Figure 28

Case Model 33-463

33-887 33-892 33-897

33-886 33-891 33-896

Figure 29 Alternative labels

15

Figure 30 Example of a new sliding hook design

Figure 31 Case Model 33-662 Figure 32 Case Model 33-663

Figure 33 Magnetic hook and Fathook

16

Figure 34 Case Model - Autolock

Figure 35 Alternative lower profile sliding end hook for 33-654, 33-662, 33-991, 33-663

and 33-993

Model 33-654 Model 33-991 Model 33-993

Figure 36 Alternative DEWALT case design

17

Figure 37 High Visibility Mylar tape blade example

Figure 38 DEWALT design, example of Case Model: 36226

Figure 39 FatMax Next Gen FMHT design, example of Case Model: 36326

18

Case model: 36318

Case model: 36317

Case model: 36327

Case model: 36336

Case model: 36337

Figure 40 FatMax Next Gen FMHT0 design examples of Case Models

Crown copyright 2020 NMO The Office for Product Safety and Standards Department for Business, Energy and Industrial Strategy This material may be freely reproduced except for sale

Documents

EU-type examination certificate UK/0126/0095 Revision 16