EU-TYPE EXAMINATION CERTIFICATE SUMMARY

• Certificate No. Baseefa09ATEX0137X

• Equipment Ref. Position Feedback Converter IPFC200

• Marking II 1G Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C

• Safety Parameters Terminals 11 and 12 Ui = 28V Ii = 200mA Pi = 1.35W Ci = 0 Li = 0 Terminals 20 and 19 or 18 and 17 Ci = 0 Li = 0 Uo = 5.88V Io = 23mA Po = 34mW Transducer Terminals 22 to 24 Ci = 22nF Li = 0 Uo = 5.88V Io = 200mA peak and 85mA continuous Po = 500mW Terminals 1 and 2 Ui = 28V Ii = 100mA Pi = 1W Ci = 33nF Li = 0 Uo = 28V Io = 200mA Po = 1.35W Terminals 5 and 4 or 7 and 8 Ui = 28V Pi = 1.35W Ci = 0 Li = 0 Uo = 0

• Special Conditions of Safe Use 1. The apparatus housing is plastic which does not meet the conductivity requirements of EN

60079-0: 2012. Also, the fixing screws on the top of the housing are connected to the 0V of the apparatus. Therefore the apparatus must be installed in an enclosure which is either metal not containing light metals, or is plastic meeting the conductivity requirements of EN 60079-0: 2012, and provides a degree of protection of at least IP20.

Updated: 09/09/2016