EU Declaration of conformity

Confirm with the

Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery

Pressure equipment directive 2014/68/EU: of the European Parliament and of the Council of 15. May 2014 on the approximation of the laws of the Member States relating to machiner

The appliance Product: Shut-off butterfly valves, type of construction Holter Regelarmaturen

Type: BR12WT

has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of

Company: Holter Regelarmaturen GmbH & Co. KG

Application of the following standards:

DIN EN ISO 12100:2011-03 Safety of machinery A Technical Documention is completely available. The operating instructions for the appliance are available:

in original version (German language)

in English language Schloß Holte-Stukenbrock, 19.04.2016 Holter Regelarmaturen GmbH & Co.KG

Place, Date Signature Specifics concerning the signatory

EXCELLENCE IS OUR STANDARD

HORA

REGELARMATUREN

EU DECLARATION OF CONFORMITY No. DOC1 0-00

We, Holter Regelarmaturen GmbH & Co. KG Helleforthstrasse 58 - 60 33758 Schloß Holte — Stukenbrock

declare under our sole responsibility, that the without automated actuator supplied valves of types

BR216GF BR316GF,

to which this declaration is referring to, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures

full quality assurance (Module H)

The valves covered by this declaration are classified as category I under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for Installation in pressure equipment.

The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied standards:

DIN EN 19 Marking of metallic valves DIN EN 764-5 Pressure Equipment — Part 5: Compliance and inspection Documentation of

Materials DIN EN 1349 Industrial process control valves DIN EN 1561 Founding — Grey cast irons DIN EN 1563 Founding — Spheroidal graphite cast irons DIN EN 12266 Industrial valves — Testing of valves DIN EN 12516 Industrial valves — Shell design strength

The conformity assessment procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045).

Schloß Holte, April 61h, 2017 Lothar Brakh ge

Lothar Brakha

EXCELLENCE IS OUR STANDARD

HORA

REGELARMATUREN

EU DECLARATION OF CONFORMITY No. DOC20-00

We, Holter Regelarmaturen GmbH & Co. KG Helleforthstrasse 58 - 60 33758 Schloß Holte — Stukenbrock

declare under our sole responsibility, that the electrically driven valves of types

BR216GF

BR316GF,

to which this declaration is referring to, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures

full quality assurance (Module H)

The valves covered by this declaration are classified as category I under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for installation in pressure equipment.

Mechanical hazards not resulting from excess pressure, were considered according to the essential safety requirennents set out in Machinery Directive 2006/42/EC and appropriate preventive measures were taken. The declaration of incorporation of partly connpleted machinery for actuators is part of the documentation.

The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied standards:

DIN EN 19 Marking of metallic valves DIN EN 764-5 Pressure Equipment — Part 5: Compliance and inspection Documentation of

Materials DIN EN 1349 Industrial process control valves DIN EN 1561 Founding — Grey cast irons DIN EN 1563 Founding — Spheroidal graphite cast irons DIN EN 12266 Industrial valves — Testing of valves DIN EN 12516 Industrial valves — Shell design strength

The conformity assessnnent procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045).

Schloß Holte, April 6th, 2017

EXCELLENCE IS OUR STANDARD

HORA

REGELARMATUREN

EU DECLARATION OF CONFORMITY Na. D0009-00

VVe, Holter Regelarmaturen GmbH & Co. KG Helleforthstrasse 58 - 60 33758 Schloß Holte — Stukenbrock

declare under our sole responsibility, that the valves of types

BR216 / BR225 / BR240

BR316 / BR325 / BR340,

operated by electromotive, pneumatic or hydraulic force, are in compliance with the European pressure equipment directive 2014/68/EU and were subjected to the conformity assessment procedures

full quality assurance (Module H)

The valves covered by this declaration are classified as category I, II or III under directive 2014/68/EU. They are pressure maintaining parts intended exclusively for Installation in pressure equipment.

Mechanical hazards not resulting from excess pressure, were considered according to the essential safety requirements set out in Machinery Directive 2006/42/EC and appropriate preventive measures were taken. The declaration of incorporation of partly completed machinery for actuators made by HORA is part of the documentation.

The valves described above are in conformity with the relevant European Union harmonisation legislation and with the applied harmonised standards:

DIN EN 19 Marking of metallic valves DIN EN 287 Fusion welding — Approval testing of welders DIN EN 764-5 Pressure Equipment — Part 5: Compliance and inspection Documentation of Materials DIN EN 1349 Industrial process control valves DIN EN ISO 9712 Non-destructive testing — Qualification and certification of NDT personnel DIN EN 10028 Flat products made of steel for pressure purposes DIN EN 10204 Metallic products — Types of inspection documents DIN EN 10213 Technical delivery conditions for steel castings for pressure DIN EN 10222 Steel forgings for pressure purposes DIN EN 10269 Steels and nickel alloys for fasteners DIN EN 10272 Stainless steel bars for pressure purposes DIN EN 10273 Hot rolled weldable steel bars for pressure purposes DIN EN 12266 Industrial valves — Testing of valves DIN EN 12516 Industrial valves — Shell design strength DIN EN ISO 15614 Fusion welding — Specification and approval of welding procedures

The conformity assessment procedure and the monitoring are performed by the notified body TÜV Nord Systems GmbH & Co. KG (0045).

Schloß Holte, July 15th, 2016 Lothar Brakhag

EU Declaration of conformity

Confirm with the

Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery

Council Directive 2014/30/EU: of 20 April 2016 on the approximation of the laws of the Member States relating to electromagnetic compatibility

The appliance Product: Actuator, type of construction Holter Regelarmaturen

Type: MC15, MC55, MC55Y, MC100, MC103, MC160, MC163, MC250, MC253,

MC400, MC403, MC500, MC503, MC1000, MC1003, MC1503,

MC103SE, MC253SE,

M106, M130, M140, M180 (24 V )__________________________________________

has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of

Company: Holter Regelarmaturen GmbH & Co. KG

Application of the following standards:

DIN EN ISO 12100:2011-03 Safety of machinery

DIN EN 61000-6-2 03-2006 Immunity for industrial environments

DIN EN 61000-6-3 11-2012 Emission standard for residential, commercial and light-industrial environments A Technical Documention is completely available. The operating instructions for the appliance are available:

in original version (German language)

in English language Schloß Holte-Stukenbrock, 19.04.2016 Holter Regelarmaturen GmbH & Co.KG

Place, Date Signature Specifics concerning the signatory

EU Declaration of conformity

Confirm with the

Directive 2006/42/EC: of the European Parliament and of the Council of 17 May 2006 on the approximation of the laws of the Member States relating to machinery

Council Directive 2014/30/EU: of 20 April 2016 on the approximation of the laws of the Member States relating to electromagnetic compatibility

Council Directive 2014/35/EU: of 20 April 2016 on the harmonization of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits „low voltage“

The appliance Product: Actuator, type of construction Holter Regelarmaturen

Type: MC15, MC55, MC100, MC103, MC160, MC163, MC250, MC253, MC400, MC403

MC500, MC503, MC1000, MC1003, MC1503, MH2503, MC103SE, MC253SE,

M106, M130, M140, M180 (230 V)__________________________________________

has been developed, designed and manufactured in accordance with the mentioned European Directives, and sole responsibility of

Company: Holter Regelarmaturen GmbH & Co. KG

Application of the following standards:

DIN EN ISO 12100:2011-03 Safety of machinery

DIN EN 61000-6-2 03-2006 Immunity for industrial environments

DIN EN 61000-6-3 11-2012 Emission standard for residential, commercial and light-industrial environments

DIN EN 61000-3-2 03-2015 Limits for harmonic current emissions

DIN EN 61000-3-3 03-2014 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems

A Technical Documention is completely available. The operating instructions for the appliance are available:

in original version (German language)

in English language Schloß Holte-Stukenbrock, 19.04.2016 Holter Regelarmaturen GmbH & Co.KG

Place, Date Signature Specifics concerning the signatory