Quick explanation:

When object is detected on the sensor 1, the sensor detects the bodyweight and body temperature and sends signal to control box through sensor signal wire. At sensor 2, it will display the body weight and body temperature. It will also sense the presence of an object under the shower head (in range of 60cm-80cm wide from the sensor) which will directly sends signal to control box. Then, the water that has been adjusted with suitable temperature and right volume will flow through the flexible host and releases at the shower head.

Detailed Explanation:

Sensor 1: When the sensor senses the present of an object(ie: feet) on the tile, it will detect the body weight and body temperature of the person. Then the signal will be sent to the control box.

Control box: Inside the control box, there is a solenoid valve that starts and stops the water flow. It basically controls when the water flows and stops it from flowing. The control box will adjust the water temperature suitable to the person’s body temperature and adjust the volume of water in the right amount.

Sensor 2: This sensor will sense the presence of an object under a shower (in range of 60cm-80cm wide from the sensor) and just then, the water that has been adjusted will flow into the flexible host and released through the shower head.

Power Source: Transformers are included in our products. We uses 6V transformer for this Aushosen and it it connected to the main supply.

Solenoid Valve: Transforming electrical energy to motion, it physically starts and stops the water flow. It opens up and released water through flexible host as soon as signal from sensor 2 is received to the control box. The solenoid is always in closed position, opens up when the electronic signal is received, it goes back to closed position when object leaves the infrared sensing zone(not in the range or under shower).

Water out passage: When the solenoid valve is opened, water will flow through the flexible host and release through the shower head.

What makes Aushosen so special and is better than normal shower?

It saves water. Sensor 1 detects body weight, control box adjusts to correct volume of water. Easy to handle. We do not have to control and worry about the suitable water temperature,

suitable with our body temperature and weather. Modern technology. We are using infrared sensor in our product, this is easy because it does

all the works. Saves time. With correct volume of water and suitable water temperature that has been

adjusted, we do not have to open the tap of the shower and closes it when we are using shampoo or soap.

Target to sell Aushosen:

Hotels/Apartments Spas Resorts/Waterpark Bungalows/Care homes