Essential Features Tdd Access Mode

8/14/2019 Essential Features Tdd Access Mode

1/26

Worksheet in C: Documents and Settings tskinner Desktop 3TF01201.doc - Essential_Features 02-12-2003

Standard Option Phase 1 Phase 2 Services Impacted Comments

L1.0000 Layer 1L1.A000 Physical ChannelsL1.A001 PRACH M 1 kind of slot format is specif ied for Random-

access message data fields

Burst type 3 E E

L1.A002

DPCH(UL)

M

3 kinds of slot format are specified Burst types 1, 2, 3

E E

L1.A003 DPCH(DL) M kinds of slot format are specified Burst types 1, 2 E E

L1.A004 P-CCPCH M Fun E E

L1.A005 S-CCPCH M 2 kinds of timeslots, Burst type 1, 2 1, 2 1, 2 1, 2

L1.A006 PICH M Fun E E

L1.A007 PSCH M Physical Synchronization Channel, containing

both Primary and Secondary Codes

Fun E E

L1.A008 PDSCH O/

M

2 kinds of slot format are specified O for the

network/ M for UE for all but lowest class

Burst type 1,2

E

Needed for

compliance/intero

perability

E

Needed for

compliance/intero

perability

L1.A009 PUSCH O/

M

3 kinds of slot format are specified O for the

network/ M for UE for all but lowest class

Burst type 1,2,3 E E

L1.A010 PNBSCH O Applicable in Base station only. used for over air

Node B sync

1 time slot - Rach PRACH

Burst type 3 N N

L1.A011 Transport Channels

L1.A012 BCH M Fun E E

L1.A013 PCH M Fun E E

L1.A014 FACH M Fun E EL1.A015 RACH M Fun E E

L1.A016 DCH M Fun E E

L1.A017 DSCH O/

M

O for Network; M for UE for all but lowest class Fun E E

L1.A018 USCH O/

M

O for Network; M for UE for all but lowest class Fun E E

L1.A019 TrCH MultiplexingL1.A020 SCCPCH carrying

PCH

M Specifying whether PCH and FACH are carried on

a single SCCPCH.

Fun E E

L1.A021 SCCPCH carrying

FACH multiplexing


a single SCCPCH.

Fun E E

The Essential Features for the TDD Access Mode

Re-

lea-

se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:Values Essential Range

E = Essential

N = Non-Essential

- 1/14 -


2/26



Re-lea-

se

M = UE Mandatory

O = UE Optional- = Non UE feat. Option typeFuntionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:

Values Essential Range

E = EssentialN = Non-Essential

L1.A022 SCCPCH carrying

PCH/FACH

multiplexing


a single SCCPCH.

Fun E E

L1.A023 Scrambling codesL1.A024

Scrambling sequence

M Fun E E

L1.A025

SpreadingL1.A026 Support for SF1 onUL and DL

O Support for SF1 al lows the ful l resource space to

be allocated to a single UE

Fun E E

L1.A027 Transport format detectionL1.A028 TFCI based detect ion M Applicable when the t ransport format combinat ion

is signalled using the TFCI field

Fun E E

L1.A029 PagingL1.A030 Number of PI (Paging

Indicator) per frame

burst type 1

M Number of paging indicators per time slot (Np) (60, 30, 15) E E

L1.A031 Number of PI (Paging

Indicator) per frame

burst type 2

M Number of paging indicators per time slot (Np) (68, 34, 17) E E

L1.A032 CN domain specific

DRX cycle length for

CS domain

M Coefficient (x) indicating time interval between

monitoring paging occasion to be used by a UE

attached to CS. Unit: 2^x frames

6 to 9 E E

L1.A033 CN domain specific

DRX cycle length for

PS domain

M Coefficient (x) indicating time interval between

monitoring paging occasion to be used by a UE

attached to PS. Unit: 2^x frames

6 to 9 E E

L1.A034 UE PositioningL1.A035 Support for Enhanced

Cell-ID

O/

M

Mandatory in UE (no impact to UE - UE does

nothing special to support), optional in network.

Network identifies UE based on what cell it is in.

If UE cell ID is not known, network pages UE and

UE replies with cell ID

Fun N N

L1.A036 Support for stand-

alone location

determination

O Optional in UE. Applicable to UE with complete

GPS receiver, not requiring network assistance;

UE signals network whether or it supports this

optional feature

Fun N N

- 2/14 -


3/26



Re-

lea-

se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:

Values Essential RangeE = Essential

N = Non-Essential

L1.A037 Support for OTDOA

(UE assisted)

O/

M

TDD UE must support/assist network-based

OTDOA through reporting of SFN-SFN Type 2

measurement upon request;

optional in the Network

Fun E for UE E for UE

L1.A038 Support for OTDOA

(UE based)

O Calculation of UE position by the UE using

OTDOA (SFN-SFN type 2 measurement);

optional in UE; UE signals capability tosupport/not support to the network

Fun N N

L1.A039 Support for IPDL

(OTDOA)

O Idle Per iod DL is used to enhance the hearibil ity of

neighboring cells by UE in order to measure SFN-

SFN type 2 on P-CCPCH with improved accuracy

(This is an optional UE capability; UE signals

capability to support/not support to the Network)

Fun N N

L1.A040 Assisted GPS O Optional - only applies to UEs with GPS. UE

signals capability to support/not support to the

Network)

Fun N N

L1.A041 Idle Periods

L1.A042 Continuous mode O/

M

The idle periods are active all the time.O in

network, M in UE - UE must be able to

understand existence of idle periods

Fun E in UE to

understand

existence; N for

Network

E in UE to

understand

existence; N for

Network

L1.A043 Burst mode O/

M

The idle periods are arranged in bursts where each

burst contains enough idle periods to allow a UE

to make sufficient measurements for its location to

be calculated. O for Network, M for UE

Fun E in UE to

understand

existence; N for

Network

E in UE to

understand

existence; N for

Network

L1.A044 Power control

L1.A045DPCH UL TPC

L1.A046 DPCH UL open-loop

power control

M E E

L1.A047

Gain factor

M

Way of controlling the gain factors

0: Signalled, 1:

Computed

E E

L1.A048 UL target SIR M Parameter signaled by RRC Par E E

L1.A049 DPCH Constant value M Parameter signaled by RRC Par E E

L1.A050

DPCH DL TPC

- 3/14 -


4/26



Re-

lea-

se

M = UE MandatoryO = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L1.A051 Minimum DL Power M This parameter indicates the minimum DL power

for a DPCH code, relative to the P-CCPCH Tx

Power of that cell. The reference point is the

antenna connector

INTEGER (-350 ..150)

Unit: dB Range: -

35..+15 dB Step: 0.1 dB

E E

L1.A052 Maximum DL Power M This parameter indicates the maximum DL power

for a DPCH relative to the P-CCPCH Tx Power of

that cell. The reference point is the antenna

connector

INTEGER (-350 ..150)

Unit: dB Range: -

35..+15 dB Step: 0.1 dB

E E

L1.A053 TPC-Step Size M The step of the power increase or decrease of the TPar: 1, 2, 3 dB E E

L1.A054 PDSCH TPC

L1.A055 Inner-loop power

control

O/

M

PDSCH power increased or decreased based on

power control commands sent by the UE on the

UL DPCH or PUSCH. The ability to perform

inner loop power control (generation and

transmission of TPC bits) is mandatory in the UE;

utilization of inner loop power control for PDSCH

is optional in the network

Fun E E

L1.A056 Other procedures O If the network chooses not to utilize inner loop

power control, it may maintain fixed power or use

a proprietary means to increase or decrease

PDSCH power; procedure would be within the

network only and have no impact on the UE

Fun N N

L1.A057 PRACH TPC

L1.A058 PRACH Constant

Value

M Margin for PRACH. Parameter signaled by

RRC.

Fun E E

L1.A059 PUSCH TPCL1.A060

Gain factor

M

Way of controlling the gain factors

0: Signalled, 1:

Computed

E E

L1.A061 UL target SIR M Parameter signaled by RRC Par E E

L1.A062 PUSCH Constant

value

M

Parameter signaled by RRC Par

E E

L1.A063 Intercell & Node B SyncL1.A064 Intercell Sync M Network feature only to synchronize frame timing

of neighboring cells

Fun E E

L1.A065 Node B Sync Based

on GPS Time of Day

O Network feature only. Uses absolute external

timing reference

Fun

N N

- 4/14 -


5/26



Re-

lea-

se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


N = Non-Essential

L1.A066 Node B Sync Based

on input synch signal

from another Node B

O Network feature only. Uses opt ional sync por t

Fun

N N

L1.A067 Over-the-air Node B

Sync

O Network feature only. Uti lizes optional special

over-the-air-bursts, which are measured by the

various Node Bs/cells and reported back to theRNC. The RNC calculates SFN and timing offsets

based on these measurements and sends timing

update information to each Node B via Iub

messaging. At least one cell in the RNC area must

have an external absolute timing reference (e.g.

GPS)

Fun

N N

L1.A068 Cell Sync Burst

Timing

O

Network measurement for over-air Node B sync Fun

N N

L1.A069 Cell Sync Burst SIR O

Network measurement for over-air Node B sync Fun

N N

L1.A070 DL Transmit diversityL1.A071 Time Switched

Transmit Diversity

(TSTD)

O/

M

TSTD can be applied to the SCH. TSTD is

optional in UTRAN, while it is mandatory in the

UE. (No impact to UE; UE does nothing special to

support)

Fun E E

L1.A072 Transmit Diversity on

DPCH and PDSCH

O This method is optional in UTRAN. The spread

complex valued signal is fed to both TX antenna

branches, and weighted with antenna specific

weight factorsw 1 and w 2 . These weight factors

are calculated on a per slot and per user basis.

(No impact to UE; UE does nothing special to

support)

Fun E E

L1.A073 Space Code Transmit

Diversity (SCTD) on

beacon channels

O/

M

This method is optional in UTRAN while it is

mandatory in the UE.

Fun E E

L1.A074 Bit rate of SDCCH M GSM channel. For UE supporting TDD and GSM

only, E in UE to understand existence

1.7, 3.4, 13.6 kbps E 3.4, 13.6 kbps E 3.4, 13.6 kbps

L1.A075 Receiver diversityL1.A076 Base Station Receiver

Diversity

O Optional for the network . Support has no impact

on the UE

E E

- 5/14 -


6/26



Re-

lea-

se

M = UE MandatoryO = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L1.A077 Adaptive Antennas

L1.A078 Base Station Rx

Adaptive Antennas

O Base Stat ion receiver feature only. Not req'd by

the standards (not in R4 standards). No impact on

UE. Enhancement for the future for improved UL

performance.

N N

L2.0000 Layer 2L2.M000 Layer 2 - MACL2.M001 Logical channels

mapped on

RACH/FACH

M Fun E E

L2.M002 Logical channels

mapped on DSCH

O/

M

O for Network, M for UE for all but lowest class Fun E E


mapped on USCH

O/

M

O for Network, M for UE for all but lowest class Fun E E


mapped on DCH

M Fun E E


mapped on BCH

M Fun E E


mapped on PCH

M Fun E E

L2.P000 Layer 2 - PDCPL2.P001 ROHC profiles O Robust Header Compression Fun N N

L2.P002 RFC 2507 Header

Compression

M Header Compression Fun E E

L2.P003 Lossless relocation

(header size)

O Fun N N

L2.R000 Layer 2 - RLCL2.R001 Transparent mode M The RLC sublayer consists of RLC entities, of

which there are three types: Transparent Mode

(TM), Unacknowledged Mode (UM), and

Acknowledged Mode (AM) RLC entities

Fun E E

- 6/14 -


7/26



Re-lea-

se

M = UE Mandatory

O = UE Optional- = Non UE feat.

Option typeFuntionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


N = Non-Essential

L2.R002 Unacknowledged

Mode

M The RLC sublayer consists of RLC enti ties, of

which there are three types: Transparent Mode

(TM), Unacknowledged Mode (UM), and


Fun E E

L2.R003 Acknowledged Mode M The RLC sublayer consists of RLC enti ties, of

which there are three types: Transparent Mode(TM), Unacknowledged Mode (UM), and


Fun E E

L3.0000 Layer 3L3.R000 Layer 3 - RRCL3.R001 System Information Block

L3.R002 SIB 1 M contains NAS system information as well as UE

timers and counters to be used in idle mode and in

connected mode.

E E

L3.R003 SIB 2 M contains the URA identity. (used in URA_PCH

state only)

E URA_PCH for

batteryconsumption

E URA_PCH for

batteryconsumption

L3.R004 SIB 3 M contains parameters for cell selection and re-

selection (idle and connected).

E E

L3.R005 SIB 4 O/

M

contains parameters for cell selection and re-

selection to be used in connected mode only if

parameters are different from idle mode.

Mandatory for UE.

N N

L3.R006 SIB 5 M contains parameters for the configuration of the

common physical channels in the cell.

E E

L3.R007 SIB 6 O/

M

contains parameters for the configuration of the

common and shared physical channels to be usedin connected mode. Mandatory for UE.

N N

L3.R008 SIB 7 M contains the fast changing parameters UL

interference and Dynamic persistence level.

E E

L3.R009 SIB 11 M contains measurement control information to be

used in the cell.

E E

L3.R010 SIB 12 O/

M

contains measurement control information to be

used in connected mode only if parameters are

different from idle mode. Mandatory for UE.

N N

- 7/14 -


8/26



Re-

lea-se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Funor Parameter Range

DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L3.R011 SIB 13 O/

M

contains ANSI-41 system information. Mandatory

for UE.

N N

L3.R012 SIB 14 O/

M

Support of SIB 14 is mandatory in the UE, but

optional in the Network. SIB 14 is for TDD

only. It contains parameters (TS ISCP) for

common and dedicated physical channel

uplink outer loop power control for both idleand connected mode.

E E

L3.R013 SIB 15 O contains information useful for UE-based or UE-

assisted positioning methods.

N N

L3.R014 SIB 16 O contains radio bearer, transport channel and

physical channel parameters to be stored by UE in

idle and connected mode for use during handover

to UTRAN.

N N

L3.R015 SIB 17 O contains fast changing parameters for the

configuration of the shared physical channel to be

used in connected mode.

E.. E..

L3.R016 SIB 18 O/ M

contains PLMN identities of neighbouring cells tobe considered in idle mode as well as in connected

mode. Mandatory for UE.

N N

L3.R017 RRC states

L3.R018 CELL_PCH M Fun E E

L3.R019 CELL_FACH M Fun E E

L3.R020 CELL_DCH M Fun E E

L3.R021 URA_PCH M Fun E E

L3.R022 Default configuration

for handover

O Fun N N

L3.R023 Measurements

L3.R024 Intra-frequency measurements

L3.R025 1g M Change of best cell ( trigger for TDD-TDD intra-

freq Handover)

Fun E E

L3.R026 1h M Timeslot ISCP below a certain threshold (TDD) Fun E E

L3.R027 1i M Timeslot ISCP above a certain threshold (TDD) Fun E E

L3.R028 Periodic M Fun E E

L3.R029 Sintrasearch M Parameter to determin if UE need not perform

intre-frequency measurement in idle mode. This is

beneficial for UE battery saving.

Fun E E

- 8/14 -


9/26



Re-lea-

se

M = UE Mandatory

O = UE Optional- = Non UE feat.

Option typeFuntionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L3.R030 Inter-frequency measurements

L3.R031 2a M Change of best frequency (could be used to trigger

for TDD to FDD and TDD-TDD inter-freq

Handover)

Fun E E

L3.R032 2b M Quality of Used frequency below threshold and

quality of unused freq above threshold (could be

used to trigger for TDD to FDD and TDD-TDD

inter-freq Handover)

Fun E E

L3.R033 2c M Quality of Unused frequency above threshold

(could be used to trigger for TDD to FDD and

TDD-TDD inter-freq Handover)

Fun E E

L3.R034 2d M Quality of the currently used frequency is below a

certain threshold

Fun E E

L3.R035 2e M Quality of a non-used frequency is below a certain

threshold.

Fun E E

L3.R036 2f M Quality of the currently used frequency is above a

certain threshold

Fun E E


L3.R038 Inter-RAT measurementsL3.R039 3a M For UEs supporting TDD and GSM. Quality of

Used frequency below threshold and quality of

other system above threshold (could be used to

trigger for TDD to GSM Handover)

Fun E E

L3.R040 3b M For UEs supporting TDD and GSM. Quality of

other system is below a certain threshold

Fun E E

L3.R041 3c M For UEs supporting TDD and GSM. Quality of

other system above threshold (could be used to

trigger for TDD to GSM Handover)

Fun E E

L3.R042 3d M For UEs supporting TDD and GSM. Change of

best cell in other system

Fun E E


L3.R044 Traffic volume measurements

L3.R045 4a M

Traffic Volume exceeds an absolute threshold

Fun E E

L3.R046 4b M Traffic Volume becomes smaller than an absolute

threshold.

Fun E E


L3.R048 Quality measurements

- 9/14 -


10/26



Re-

lea-se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type


DescriptionLabel

Provisional Marks:


E = EssentialN = Non-Essential

L3.R049 5a M Could be used for power control - trigger to

indicate rate matching attributes need to be

updated

Fun E E


L3.R051 UE internal measurements

L3.R052 6a M UE Transmitted Power becomes larger than an

absolute threshold

Fun E E

L3.R053 6b M UE Transmitted Power becomes less than an

absolute threshold

Fun E E

L3.R054 6c M

UE Transmitted Power reaches its minimum value

Fun E E

L3.R055 6d M

UE Transmitted Power reaches its maximum value

Fun E E

L3.R056 6e M

UE RSSI reaches the UEs dynamic receiver range

Fun E E


L3.R058 UE Positioning Measurements

L3.R059 7a O UE position changes more than an absolute

threshold

Fun N N

L3.R060 7b O SFN-SFN measurement changes more than anabsolute threshold

Fun N N

L3.R061 7c O GPS time and SFN time have drifted apart more

than an absolute threshold

Fun N N

L3.R062 periodic O Fun N N

L3.R063 Measurement quantity for intra-frequency

measurement

L3.R064 RSCP M is applied for measurement quantity for intra-

frequency measurements (used for TDD-TDD

intra-freq Handover).

Fun E E

L3.R065 Pathloss M is applied for measurement quantity for intra-

frequency measurements.

Fun E E

L3.R066 Timeslot ISCP M Fun E EL3.R067 Measurement quantity for inter-frequency

measurement

L3.R068 Ec/No M is applied for measurement quantity for inter-

frequency measurements (used for TDD-FDD

Handover).

For UE supporting both TDD and FDD only

Fun E E

L3.R069 RSCP M is applied for measurement quantity for inter-

frequency measurements (used for TDD-FDD and

TDD-TDD inter-freq Handover).

Fun E E

- 10/14 -


11/26



Re-

lea-

se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


N = Non-Essential

L3.R070 No M Event results for inter-frequency measurement is

not applied.

Fun E E

L3.R071 Measurement reporting quantity for intra-

frequency measurement

L3.R072 RSCP M is applied for measurement reporting quantity for

intra-frequency measurements (used for TDD-

TDD intra-freq Handover).

Fun E E

L3.R073 Pathloss M is applied for measurement reporting quantity for

intra-frequency measurements.

Fun E E

L3.R074 Timeslot ISCP M Fun E E

L3.R075 SFN-SFN Observed

Time Difference Type

1

M Used for timing-maintained Handover Fun E E

L3.R076 SFN-CFN Observed

Time Difference


L3.R077 Measurement reporting quantity for inter-

frequency measurement

L3.R078 Ec/No M is applied for measurement reporting quantity for

inter-frequency measurements (used for TDD-

FDD Handover).

For UE supporting both TDD and FDD only

Fun E E

L3.R079 RSCP M is applied for measurement reporting quantity for

inter-frequency measurements (used for TDD-

FDD and TDD-TDD inter-freq Handover).

Fun E E

L3.R080 Pathloss M is applied for measurement reporting quantity for

inter-frequency measurements.

Fun E E

L3.R081 UTRA Carrier RSSI M Fun E E

L3.R082 Timeslot ISCP M Fun E E



1


L3.R084 SFN-CFN Observed

Time Difference


L3.R085 Measurement quantity for inter-RAT

measurement

Fun

- 11/14 -


12/26



Re-

lea-se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type


DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L3.R086 GSM Carrier RSSI M is applied for measurement quantity for in ter-RAT

measurements (used for TDD-GSM Handover).

For UEs supporting TDD and GSM only

Fun E E

L3.R087 Measurement reporting quantity for inter-RAT

measurement

L3.R088 GSM Carrier RSSI M is applied for measurement reporting quantity for

inter-RAT measurements (used for TDD-GSM

Handover). For UEs supporting TDD and GSM

only

Fun E E

L3.R089 Verified BSIC M is applied for measurement reporting quantity for



only

Fun E E

L3.R090 Observed Time

difference to GSM

cell

M is applied for measurement report ing quant ity for



only

Fun E E

L3.R091 Measurement quantity for Traffic Volume

measurementL3.R092 RLC-buffer payload M Fun E E

L3.R093 Average RLC-buffer

payload

M Fun E E

L3.R094 Variance of RLC-

buffer payload

M Fun E E

L3.R095 Measurement reporting quantity for Traffic

Volume measurement

L3.R096 RLC-buffer payload

for each RB

M Fun E E

L3.R097 Average RLC-bufferpayload for each RB

M Fun E E

L3.R098 Variance of RLC-

buffer payload for

each RB

M Fun E E

L3.R099 Measurement reporting quantity for Quality

measurement

L3.R100 DL TrCH BLER M Fun E E

L3.R101 SIR M Fun E E

L3.R102 Measurement quantity for UE Internal

measurement

- 12/14 -


13/26



Re-

lea-se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type


DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L3.R103 UE Transmitted

Power

M Fun E E

L3.R104 UTRA Carrier RSSI M Fun E E

L3.R105 Measurement reporting quantity for UE

Internal measurement

L3.R106 UE Transmitted

Power

M Fun E E

L3.R107 Applied Timing

Advance

M Fun E E

L3.R108 Measurement reporting quantity for UE

Positioning measurement



2

M Fun E E

L3.R110 UE Positioning

OTDOA quality

M Estimate of the quality of the SFN-SFN

measurement

Fun E E

L3.R111 UE GPS Timing of

Cell Frames for UE

positioning

O Fun N N

L3.R112 UE GPS Code Phase O Fun N N

L3.R113 UE Positioning Errpr O Fun N N

L3.R114 State transition for PS RB

L3.R115 CELL_FACH ->

CELL_FACH

M is applied for PS RB state transition. Fun E E

L3.R116 CELL_DCH ->

CELL_DCH


L3.R117 CELL_PCH ->

CELL_FACH


L3.R118 CELL_FACH ->CELL_PCH


L3.R119 URA_PCH ->

CELL_FACH



URA_PCH


L3.R121 CELL_DCH ->

URA_PCH



CELL_DCH


L3.R123 CELL_DCH ->

CELL_FACH


- 13/14 -


14/26



Re-

lea-

se

M = UE Mandatory

O = UE Optional

- = Non UE feat.

Option type

Funtionality = Fun

or Parameter Range

DescriptionLabel

Provisional Marks:


E = Essential

N = Non-Essential

L3.R124 Packet rate change procedure

L3.R125 Physical channel

reconfiguration

M is applied for packet rate change procedure. Fun E E

L3.R126 Physical Shared

Channel Allocation

M is applied for packet rate change procedure. Fun E E

L3.R127 Reconfiguration

L3.R128 RB reconfiguration

L3.R129 TFS reconfiguration M is applied for RB reconfiguration Fun E E

L3.R130 TFCS reconfiguration M is applied for RB reconfiguration Fun E E

L3.R131 Transport channel reconfiguration

L3.R132 TFS reconfiguration M is applied for transport channel reconfiguration. Fun E E

L3.R133 TFCS reconfiguration M is applied for transport channel reconfiguration. Fun E E

L3.R134 Handover

L3.R135 Timing maintain HHO M is applied for HHO. Fun E E

L3.R136 Maximum number of

active set cell

M Maximum number of RLs 1 E E

L3.R137 Dynamic Channel Allocation

L3.R138 Fast DCA O Network function only . Assignment of resources

to radio bearers based on interference and

resource measurements with a goal of minimizing

interference and avoiding overload conditions

fun E E

L3.R139 Slow DCA O Network function only. Assignment of resources,

including timeslots, to different cells according to

varying cell load.

fun N N

- 14/14 -


15/26

Spec Clause Title Prio-rity Seg-ment Batch Comments Phase 1 Phase 2

34.108 6.10.3.4.1.1 Stand-alone UL:1.7 DL:1.7 kbps SRBs forDCCH

N N

34.108 6.10.3.4.1.2 Stand-alone UL:3.4 DL:3.4 kbps SRBs forDCCH

E E standalone SRB

on DCH can be

used to relieve

RACH

congestion

34.108 6.10.3.4.1.3 Stand-alone UL:13.6 DL:13.6 kbps SRBsfor DCCH

E. E.

34.108 6.10.3.4.1.4 Conversational / speech / UL:12.2DL:12.2 kbps / CS RAB + UL:3.4 DL:3.4

kbps SRBs for DCCH

E E


kbps SRBs for DCCH

N N


kbps SRBs for DCCH

N N

34.108 6.10.3.4.1.7 Conversational / speech / UL:7.4 DL:7.4kbps / CS RAB+ UL:3.4 DL:3.4 kbps

SRBs for DCCH

N N

34.108 6.10.3.4.1.8 Conversational / speech / UL:6.7 DL:6.7kbps / CS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

N N

34.108 6.10.3.4.1.9 Conversational / speech / UL:5.9 DL:5.9kbps / CS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

N N


kbps SRBs for DCCH

N N


kbps SRBs for DCCH

N N

The RAB/RB combinations for the TDD Access Mode

GCF prioritiesRAB/RB combinationsServices

ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential


16/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential

34.108 6.10.3.4.1.12 Conversational / unknown / UL:28.8DL:28.8 kbps / CS RAB + UL:3.4 DL:3.4

kbps SRBs for DCCH

E E

34.108 6.10.3.4.1.13

64 kbps w/

20 ms TTI

Conversational / unknown / UL:64 DL:64

kbps / CS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

E E

34.108 6.10.3.4.1.13

64 kbps w/

40 ms TTI



SRBs for DCCH

N N

34.108 6.10.3.4.1.14

32 kbps w/

20 ms TTI



SRBs for DCCH

E E

34.108 6.10.3.4.1.14

32 kbps w/

40 ms TTI



SRBs for DCCH

N N

34.108 6.10.3.4.1.15 Streaming / unknown / UL:14.4/DL:14.4kbps / CS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

E E

34.108 6.10.3.4.1.16 Streaming / unknown / UL:28.8/DL:28.8kbps / CS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

E E

34.108 6.10.3.4.1.17 Streaming / unknown / UL:57.6/DL:57.6

kbps / CS RAB + UL:3.4 DL:3.4 kbpsSRBs for DCCH

E E

34.108 6.10.3.4.1.18 Streaming / unknown / UL:0 DL:64 kbps /CS UL:3.4 DL:3.4 kbps SRBs for DCCH

N N

34.108 6.10.3.4.1.19 Streaming / unknown / UL:64 DL:0 kbps /CS + UL:3.4 DL:3.4 kbps SRBs for

DCCH

N N


17/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential

34.108 6.10.3.4.1.20 Streaming / unknown / UL:0 DL:128 kbps/ CS or PS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

N N

34.108 6.10.3.4.1.21 Streaming / unknown / UL:128 DL: 0kbps / CS or PS RAB + UL:3.4 DL:3.4

kbps SRBs for DCCH

N N

34.108 6.10.3.4.1.22 Streaming / unknown / UL:0 DL:384 kbps/ CS or PS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH

N N

34.108 6.10.3.4.1.23 Interactive or background / UL:32 DL:8kbps / PS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH / (TC, 10 ms TTI)

N N



N N


SRBs for DCCH / (CC, 10 ms TTI)

N N



N N


SRBs for DCCH/(TC)

N N


SRBs for DCCH/(CC)

N N

34.108 6.10.3.4.1.25 Interactive or background / UL:32 DL: 64kbps / PS RAB + UL:3.4 DL:3.4 kbps

SRBs for DCCH/ (TC, 10 ms TTI)

N N


18/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential



N N



N N



N N


SRBs for DCCH

E E


SRBs for DCCH

E E

34.108 6.10.3.4.1.28 Interactive or background / UL:128DL:128 kbps / PS RAB + UL:3.4 DL:3.4

kbps SRBs for DCCH

N N

34.108 6.10.3.4.1.29 Interactive or background / UL:64 DL:144kbps / PS RAB + UL:3.4 DL: 3.4 kbps

SRBs for DCCH

E E

34.108 6.10.3.4.1.30 Interactive or background / UL:144DL:144 kbps / PS RAB + UL:3.4 DL: 3.4

kbps SRBs for DCCH

N N


SRBs for DCCH /10 ms TTI

N N


SRBs for DCCH /20 ms TTI

E E


19/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential


SRBs for DCCH / 10 ms TTI

E E


SRBs for DCCH / 20 ms TTI

N N


kbps SRBs for DCCH / 10 ms TTI

N N



N N



N N



N N



N N



N N



N N



N N


20/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential



N N



N N

34.108 6.10.3.4.1.38 Conversational / speech / UL:12.2DL:12.2 kbps / CS RAB + Interactive or

background / UL:32 DL:8 kbps / PS RAB

+ UL:3.4 DL:3.4 kbps SRBs for DCCH /

(TC, 20 ms TTI

N N




(TC, 10 ms TTI

N N




(CC, 10 ms TTI

N N




(CC, 20 ms TTI

N N


background / UL:32 DL:64 kbps / PS

RAB+ UL:3.4 DL: 3.4 kbps SRBs for

DCCH / (TC, 10 ms TTI)

N N


21/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential




DCCH / (TC, 20 ms TTI)

N N


background / UL:32 DL:64 kbps / PSRAB+ UL:3.4 DL: 3.4 kbps SRBs for

DCCH / (CC, 10 ms TTI)

N N




DCCH / (CC, 20 ms TTI)

N N




DCCH

E E



RAB + UL:3.4 DL:3.4 kbps SRBs for

DCCH

E E

34.108 6.10.3.4.1.42

256Kw/10ms TTI

Conversational / speech / UL:12.2

DL:12.2 kbps / CS RAB + Interactive orbackground / UL:64 DL:256 kbps / PS


DCCH/10ms TTI

E E

34.108 6.10.3.4.1.42

256K

w/20ms TTI


DL:12.2 kbps / CS RAB + Interactive or



DCCH/20ms TTI

N N


22/26



ImpactedComments

Provisional Marks:

E = Essential

N = Non-Essential

34.108 6.10.3.4.1.43

384K

w/10ms TTI





DCCH / 10 ms TTI

E E

34.108 6.10.3.4.1.43

384K

w/20ms TTI



background / UL:64 DL:384 kbps / PSRAB + UL:3.4 DL:3.4 kbps SRBs for

DCCH / 20 ms TTI

N N

34.108 6.10.3.4.1.44

2048K

w/10ms TTI





DCCH / 10 ms TTI

N N

34.108 6.10.3.4.1.44

2048Kw/20ms TTI





DCCH / 20 ms TTI

N N

34.108 6.10.3.4.1.45 Conversational / speech / UL:12.2DL:12.2 kbps / CS RAB + Streaming /

unknown / UL:57.6 DL:57.6 kbps / CS


DCCH

N N


unknown / UL:0 DL:64 kbps / CS or PS


DCCH

N N




DCCH

N N


23/26



Impacted

Comments

Provisional Marks:

E = Essential

N = Non-Essential




DCCH

N N

34.108 N N

34.108 N N

34.108 6.10.3.4.1.49

64K UL&DL

w/20ms TTI


DL:12.2 kbps / CS RAB + Conversational

/ unknown / UL:64 DL:64 kbps / CS


DCCH / 20 ms TTI

E E

34.108 6.10.3.4.1.49

64K UL&DL

w/40ms TTI


DL:12.2 kbps / CS RAB + Conversational

/ unknown / UL:64 DL:64 kbps / CS


DCCH / 40 ms TTI

N N

34.108 6.10.3.4.1.50

64K UL&DL

w/20ms TTI


kbps / CS RAB + Conversational /

unknown / UL:64 DL:64 kbps / CS RAB


20 ms TTI

N N

34.108 6.10.3.4.1.50

64K UL&DL

w/40ms TTI


kbps / CS RAB + Conversational /

unknown / UL:64 DL:64 kbps / CS RAB

+ UL:3.4 DL:3.4 kbps SRBs for DCCH /40 ms TTI

N N

34.108 6.10.3.4.51

Conv unk

64K UL&DL

w/20ms TTI


kbps / CS RAB / 20 ms TTI + Interactive

or background / UL:64 DL:64 kbps / PS


DCCH

E E


24/26



Impacted

Comments

Provisional Marks:

E = Essential

N = Non-Essential

34.108 6.10.3.4.51

Conv unk

64K UL&DL

w/40ms TTI





DCCH

N N

34.108 6.10.3.4.52

Conv unk64K UL&DL

w/20ms TTI


kbps / CS RAB / 20 ms TTI + Interactiveor background / UL:64 DL:128 kbps / PS


DCCH

E. E.

34.108 6.10.3.4.52

Conv unk

64K UL&DL

w/40ms TTI





DCCH

N N

34.108 6.10.3.4.53

Conv unk

64K UL&DL

w/20ms TTI





DCCH

N N

34.108 6.10.3.4.53

Conv unk

64K UL&DL

w/40ms TTI





DCCH

N N

34.108 6.10.3.4.54 Interactive or background / UL:64 DL:128kbps / PS RAB + Streaming / unknown /

UL:0 DL:64 kbps / CS or PS RAB+

UL:3.4 DL:3.4 kbps SRBs for DCCH

N N


25/26



Impacted

Comments

Provisional Marks:

E = Essential

N = Non-Essential

34.108 6.10.3.4.55 Interactive or background / UL:64 DL:128kbps / PS RAB + Streaming / unknown /

UL:0 DL:64 kbps / CS or PS RAB+

UL:3.4 DL:3.4 kbps SRBs for DCCH

N N


SRBs for DCCH, CCCH and BCCH +UL:16.8 DL:16 kbps SRBs for SHCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities


SRBs for DCCH, CCCH and BCCH +

UL:16.8 DL:16 kbps SRBs for SHCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities

34.108 6.10.3.4.2.3 Interactive or background / UL:64DL:2048 kbps / PS RAB + UL:16.8

DL:33.6 kbps SRBs for DCCH, CCCH

and BCCH + UL:16.8 DL:16 kbps SRBs

for SHCCH

N N RAB is flawed -needs to be

corrected;

violates UE

capabilities


kbps SRBs for DCCH + interactive or


RAB + UL:16.8 kbps SRBs for CCCH and

SHCCH + DL:33.6 kbps SRBs for CCCH,SHCCH and BCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities


26/26



Impacted

Comments

Provisional Marks:

E = Essential

N = Non-Essential


kbps SRBs for DCCH + Interactive or



SHCCH + DL:33.6 kbps SRBs for CCCH,

SHCCH and BCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities


kbps SRBs for DCCH + Interactive or



SHCCH + DL:33.6 kbps SRBs for CCCH,

SHCCH and BCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities

34.108 6.10.3.4.4.1 Stand-alone signalling RB for PCCH N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities

34.108 6.10.3.4.4.2 Interactive/Background 32 kbps PS RAB+ SRBs for CCCH + SRB for DCCH +

SRB for BCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities

34.108 6.10.3.4.4.3 Interactive / Background 32 kbps RAB +SRB for PCCH + SRB for CCCH + SRB

for DCCH + SRB for BCCH

N N RAB is flawed -

needs to be

corrected;

violates UE

capabilities

34.108 6.10.3.4.5.1 SRB for CCCH + SRB for DCCH E E