Especificaciones Tecnicas Fume Hood

7/29/2019 Especificaciones Tecnicas Fume Hood

1/7

116

F FUME HOOD

ModelFH10

DFH10 (Ductless)

FH12

DFH12 (Ductless)

FH15

DFH15 (Ductless)

External size (mm) 1000x750x2200 1200x750x2200 1500x750x2200

Internal size (mm) 900x570x745 1100x570x745 1320x745x800

Application Provide protection to the operator

MaterialWork surface: solid chemical-resistant laminate

Exterior: expoxy coated cold-rolled steel

Relative humidity 75%

Ambient temperature 15C~35C

Control Microprocessor control with touch buttons

Front sash Sliding tempered glass, thickness no less than 5mm

Duct length 4m

Duct collar size 10 inch

Inflow velocity Average 0.5m/s

Vibration 5m (rms) between the frequency of 10Hz and 10K Hz

Noise level 60db

Lightning 680lux

Fan Centrifugal, adjustable speed

Power 800W

Power supply 220V, 50Hz

Option Water tap, gas tap, cup sink, etc.

Compliance CE

It is the new technical instrument in

air condition workshop and clean

workshop. And it is widely

applicable in electronics,

mechanics, medical, anduniversity labs.

Fume hood can be used in

operation of potential risk or

unknown infected factors,

and the experiment of

flammability, explosive

volatilization and narcotics.

It can protect operator and

samples.

FH/DFH Series, Fume Hood

FH/DFH

With StandFH/DFH


2/7

117

FFUME HOOD

Model BSC11A

Overall dimension (mm) 680x400x1160

Operation are dimension (mm) 630x375x615

Filter dimension 305x610x69

Filter efficiency For 0.3m particulates, filter efficiency>99.99%

BSC11A, Class I

BYKG-I-II & BYKG-III-IV-V Class IThe Class I Biological Safety Cabinet is a negative-pressure, ventilated

cabinet usually operated with an open front and a minimum face velocity

at the work opening of at least 75 linear feet per minute (lfpm). All of the

air from the cabinet is sent through a HEPA filter, either into the

laboratory or to the outside.

Operating Range

Running conditions 220V~240V / 50Hz ~ 60Hz

Operating temperature range: 15-35C

Operating humidity range 85%

Parameter and Function

Configuration for BYKG-I-II: constituted of light-permeable(visible)

PMMA.

Configuration for BYKG-III-IV-V: Constituted of cold steel finished with

electrostatic coating.

Work desk: Stainless steel.

Main units connected flexibly with features of small tremble & low

noise.

The whole configuration more reasonable and ergonomic.

One HEPA filter.

Filter efficiency: 99.999%(0.3m).

Display the pressure differential in HEPA filter, audible &visible.

Blower fan bearing unlimited speed gear.

Centrifugal fan, low noise and energy consumption, capable offunctioning without maintenance.

Air velocity: 0.75 m /s ~ 1.0m/s.

Air dust blowing vertical.

Air velocity of blower: adjustable.

Workroom Interior.

Lighting: For BYK-I-II >500lux, For BYK-III-IV-V >650lux.

UV Lamp: Sterilizing by UV lamp. It adopts High-intensity, long life,

Ozone-free UV lamp.

External size(LxWxH): BYKG-I: 550x465x780mm,

BYKG-II:700x550x900mm, BYKG-III: 900x695x1000mm,

BYKG-IV:1000x695x1720mm, BYKG-V:1100x695x1924mm.

Internal size(LxWxH): BYKG-I: 540x385x400mm,BYKG-II: 680x450x500mm, BYKG-III:768x690x580mm,

BYKG-IV: 868x690x630mm, BYKG-V: 968x695x630mm.

Noise: For BYK-I-II


3/7

118

F FUME HOOD Laminar AirFlowBBS-13HGS/BBS13VGS, Laminar Airflow Cabinets

Model BBS13HGS BBS13VGS

External Dimen.(mm) L1300xW750xH2000L1310xW825xH2000

including the base stand

Working zone size(mm) L1200xW645xH610 L1200xW500xH570

HEPA Filter dimen.(mm) L1223xW570xH69Display Digital airflow display

Hepa filterHepa filter with 99.997%efficiency at 0.3 micros

HEPA filter, the filtrationperformance: 99.99% to 0.5 um

Dust 3.5 Granule/L for 0.5um

Noise level 60db

Airflow Horizontal, 0.3-0.5m/s Vertical, 0.3-0.5m/s

Vibration level XYZ direct 99.995% (for 0.3 um)

Air velocity 0.3-0.5m/s

Noise


4/7

119

FFUME HOOD

BSC11A Class I BYKG-II-IV-V Class I

Biosafety Performance Biosafety, and operators safety: impact sampling colony

number 10CUF/time. Slit sampling colony number 5CUF/time. Product safety: colony number 5CUF/time. Cross contamination: colony number 2CUF/time.

HEPA Filter Leak Proof The filterability of every point measuring the filterablesubstance that can be scanned and detected is nomore than 0.01 %.

The filterability of every point measuring the filterablesubstance that can't be scanned and detected is nomore than 0.005%.

Material Operation interior surface is made of 300 series

stainless steel. Front panel is made of toughened glass, which won't

be negative effected by cleaning and sterilization.

Thickness of front panel is no less than 5mm. For 0.3m particulate, the filter efficiency is

99.999%, which meet the demand of temperature,humidity, corrosion proof and mechanical strength.

Filter material is made of superfine fiberglass, whichwill not cause adverse impact on personnel,environment and facility.

Front Operation Area The structure of front panel avoids danger to operator

when sliding system can't work correctly. Alarm device assure the safety of experiments in the

specialized range.

Biological Safety Cabinets Each cabinet is tested by college of military science. Environment test: cabinets are tested under the cruel

environment range from -40C-50C, and humidity rangefrom 5%-100%.

Exclusive Four Patents New appearance. Remote control. Reserve timing. High light VFD display.

Motor Thermal protection device assure the steady in 1.15 times of

voltage rating. Actiyator is installed behind the demountable or locktabe

control panel.

Biological Safety Cabinet

BYKG-I-II Class I

BSC13IIA2X Class II BSC7IIA2 Class II BSC15IIIX Class III


5/7

120

F FUME HOOD Biological Safety Cabinet

Model BSC13IIA2X BSC18IIA2X BSC11IIA2X BSC11IIB2X

External size(mm) W1300xD850xH2200 W1800xD850xH2200 W1100xD850xH2200 W1100xD850xH2200

Internal size(mm) W1100xD600xH660 W1600xD600xH660 W970xD600xH660 W970xD600xH660

Material Work zone interior is made of 304 stainless steel expoxy coated cold rolled steel

Control system Microprocessor

Display LED display

Main filter Hepa filter with 99.999% efficiency at 0.3 micros

Exhaust filter Hepa filter with 99.999% efficiency at 0.3 micros

Intake airflow velocity 0.53m/s 0.65m/s0.015m/s 0.65m/s0.015m/s

Exhaust airflow velocity 0.33m/s 0.37m/s0.015m/s 0.37m/s0.015m/s

Air circulation 70% 30% 0

Air exhaust 30% 70% 100%

Front Panel Sliding by electronic control, double layer toughened glass

Clean level Class 100

Noise level 65db

Lightning 680Lux 800Lux ~ 1100Lux

UV lamp 15W x 1

Collecting tank 4000ml, fitted with draining valve

Power 220V, 50Hz 10% 110V~ 240V/50Hz~60Hz (optional)

Class II, A2 II, B2

BSC13IIA2X/BSC18IIA2X/ BSC11IIA2X/BSC11IIB2X, Class II

The Class II Biological Safety Cabinet is designed with inward air flow at

a velocity to protect personnel, HEPA-filtered vertical laminar airflow for

product protection, and HEPA-filtered exhausted air for environmental

protection.

CE,ISO1

3485

ISO9001

,ISO1400

1

CE,ISO1

3485

ISO9001

,ISO1400

1


6/7

121

FFUME HOOD

BSC15IIIX/ZX/KX, Class III

Model BSC15IIIX BSC15IIIZX BSC15IIIKX

External Dimensions (mm) L1340xW850xH2250 L1645xW850xH2250 L1950xW850xH2250

Internal Dimension (mm) L1240xW650xH650 L1545xW650xH650 L1850xW650xH650

No. of gloves 2 4 4

Delivery window dimension(mm) L480xW400xH400

Interception efficiency 99.999% (for 0.12m particulates)

Noise level


7/7

122

F

The only thing basic about the MRC BacBASIC is its very

reasonable price.

The BacBASIC is the ideal, entry level chamber forperformance of truly anaerobic microbiology. Move beyond jars

and the unnecessary exposure of your anaerobes to deadly

oxygen.

Already have a chamber? Then the BacBASIC offers the

perfect auxiliary chamber option for over-ow work, extra plate

storage and emergency back-up for your primary chamber.

BacBasic, Environmental Work Station &Incubator For Anaerobic Applications

Exterior Dimensions(mm) W890xD750xH750

Interior Dimensions(mm)

W820xD490xH560

Weight 103kg

Temperature Range Ambient to 42C

Temperature Uniformity +/- 0.5C

Ergonomic,

Gum Drop * Arm Port

Doors offer

maximum reach &

comfort!

*ARM PORT DOOR

DESIGN PATENT

PENDING

Removable

viewing shield for

introduction of equipment,

cleaning,

decontaminationor maintenance.

BacBasic

The MRC BacBASIC offers:An ample, ergonomic, user-friendly work station with

a minimal, space-saving exterior footprint.Excellent lighting and visibility.A quick-entry, gloveless sleeve system.A rapid* Auto-Purge Pass Box for introducing Petri

plates, specimens & supplies.(*Purge time less than 50 sec.)

Incubated storage capacity for up to 150 Petri plates.Incubation temp. range from ambient temp. to 42C.Easy-Change anatox & catalyst packs & the catalyst

can be used for up to six months before replacementor reactivation.

Central Pass

Through BoxSimple Push

Button Operation

Interior Auto-

Purge ButtonEasy Change

Anatox

& Catalyst

Packs

Anaerobic ChambersFUME HOOD

MRC.VER.02-11.10

Documents

Especificaciones Tecnicas Fume Hood