Error Code 1

Embed Size (px)

Citation preview

  • 8/12/2019 Error Code 1

    1/4

    Error Code 1: The Skyrim ScriptExtender (SKSE) is not running...

    Problem

    You didn't install the Skyrim Script Extender (or you installed it incorrectly).

    Solution

    Get SKSE fromhttp://skse.silverlock.org/and follow the installation instructions included in

    the readme file.

    If you have problems installing or running SKSE, have a look at Gopher's videoguide:http://www.youtube.com/watch?v=xTGnQIiNVqA

    Error Code 2: SKSE is outdated...

    Problem

    The SKSE version you are using is too old. You may run into this error after upgrading

    SkyUI without upgrading SKSE as well.

    Solution

    Install the latest SKSE version as described in the previous solution.

    Error Code 3: SKSE scripts areoutdated...

    Problem

    Setting up SKSE requires two steps: Installing the binaries and the Papyrus scripts.

    Your Papyrus scripts are not matching the SKSE binaries. Either you forgot to install or

    update them, or an update of the Creation Kit overwrote the files with their originals.

    Solution

    http://skse.silverlock.org/http://skse.silverlock.org/http://skse.silverlock.org/http://www.youtube.com/watch?v=xTGnQIiNVqAhttp://www.youtube.com/watch?v=xTGnQIiNVqAhttp://www.youtube.com/watch?v=xTGnQIiNVqAhttp://www.youtube.com/watch?v=xTGnQIiNVqAhttp://skse.silverlock.org/
  • 8/12/2019 Error Code 1

    2/4

    Quoting the SKSE Readme:

    1. Copy the .dll and .exe files to your Skyrim directory. This is usually in your Program Filesfolder under Steam\SteamApps\common\skyrim. If you see files named TESV and

    SkyrimLauncher, this is the correct folder. Do not copy these files to the Data folder as with

    a normal mod. The "src" folder is only useful for programmers, most users can ignore it.

    2. Copy the .pex files in Data\Scripts\ into the Data\Scripts\ folder of your installation. The .pexfiles are needed by all users of SKSE.

    Make sure you don't forget the second step.

    Error Code 4: Your Papyrus INI settings

    are invalid...Problem

    One, or more, of your Papyrus INI variables are set to invalid values. There are several

    tweaking guides and INI generators out there that propagate setting these to out-of-range

    values. As a result, SkyUI or other event-based mods can start behaving erratically.

    Solution

    Open My Documents/My Games/Skyrim/Skyrim.iniwith a text editor and reset the following values

    to their respective defaults

    [Papyrus]

    iMinMemoryPageSize=128

    iMaxMemoryPageSize=512

    iMaxAllocatedMemoryBytes=76800

    You may also have to reset these values in SkyrimCustom.ini , if it exists, which is in the same

    directory.

    For details on the meaning of these settings,

    seehttp://www.creationkit.com/INI_Settings_(Papyrus)

    Also, in case you think you know better: You don't. Seethese recommendations from a

    developer who implemented Papyrus.

    http://www.creationkit.com/INI_Settings_(Papyrus)http://www.creationkit.com/INI_Settings_(Papyrus)http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://forums.bethsoft.com/topic/1435074-multithreaded-cpu-ini-tweaks-that-actually-work/page__view__findpost__p__22050362http://www.creationkit.com/INI_Settings_(Papyrus)
  • 8/12/2019 Error Code 1

    3/4

    Note 1: If you're getting this error even though your Papyrus INI settings are correct, re-

    install SKSE. It's possible that some of your SKSE scripts have been overwritten, which

    may cause INI value test to fail.

    Note 2: If you're getting this error even though SKSE is installed correctly, verify the

    following INI setting:

    [Archive]

    bInvalidateOlderFiles=1

    A value of 0 will cause SKSE to stop working and will make the INI value tests fail.

    Error Code 5: Incompatible menu file...

    There are two potential causes of this error.

    Problem A

    You didn't uninstall an old version of SkyUI before upgrading to 3.0 or newer.

    Solution A

    Make sure you really removed all traces of older SkyUI versions, then install the new

    version again.

    Installing SkyUI with the Nexus Mod Manager can help you with that, because it will detect

    and list conflicting files from SkyUI 2.2 and 3.1-alpha.

    Problem B

    There's another mod that overrides a particular menu file SkyUI is using as well.

    Solution B

    You'll have to pick one of the two mods.

  • 8/12/2019 Error Code 1

    4/4

    If you want another mod to be able to override certain menu files of SkyUI while keeping the

    rest, you can disable these warning messages individually in the SkyUI configuration menu

    ( Advancedpage).

    Error Code 6: Menu file versionmismatch...

    Problem

    The versions of SkyUI scripts and interface files are not matching. This could happen if you

    manually extracted the SkyUI.bsa.

    Solution

    Remove any loose SkyUI files from your data folder.