Embed Size (px)
Citation preview
2
Sealing Elements - O-Rings
QualityExcellent raw materials, process-control, controlled end-
products, well-trained employees and the ISO 9001-2000
quality-system guaranteeing only quality-products.
Products, dedicated to your application!
Product developmentOur engineers work in the forefront of development of new
compounds and designs.
Due to our worldwide ERIKS network with 43 of our own
companies, working in partnership with certified labs, we are
always searching for new engineering challenges.
ExpertiseWe have been in the front line of seal development for more
than 50 years.
RangeA total seals and gaskets program with 60.000 stock items is
available.
WorldwideMore than 40 companies worldwide, located in Europe, the Far
East and in the USA.
Customer serviceOur employees offer individual service in order to find efficient
solutions for your specific problems. We give free advice, using
our extensive knowledge.
Logistics15.000 different O-rings are kept in stock at our head office in
Alkmaar.
60.000 seals and gaskets in various dimensions are in stock and
complete our wide seal package.
ERIKS O-rings: dedicated to the future
After the invention of the O-ring
in the early 40's of the last
century, ERIKS was one of the
pioneers to bring this product to
the world market.
A wide assortment with one goal:
to offer you the best solution
with the perfect seal.
3
www.O-ring.info
Standard stock O-ring and X-ring compounds for industrial use
division warehouses.
ERIKS spec’s.
compression moulded machines.
ERIKS COMPOUNDS HARDNESS COMPR.SET 22H/100°C TEMP. RANGE
IRHD ± 5 ON O-R 3.53 mm °C
NBR 36624 70 Max. 20% - 30 / + 120
NBR 47702 90 Max. 30% - 30 / + 120
EPDM 55914 70 Max. 30% - 50 / + 120
Neoprene 32906 70 Max. 25% - 35 / + 110
Viton®
Viton®
Viton®
X-rings in NBR/FPM 70
® : Kalrez® and Viton® are registered trademarks of DuPont Performance Elastomers.
4
Sealing Elements - O-Rings
We are part of the genuine Viton® programme
In collaboration with DuPont Performance
Elastomers we offer you an extensive
range of special Viton® compounds of
which we guarantee the best value for
your application.
We store 5000 different O-rings in Viton®
black and green in compounds 51414
Alongside our standard industrial Viton® compounds we offer 40 special grades for your specific application. Among these:
Viton® 514625 for gas applications
Viton® 514670 FDA 177.2600 black
Viton®
Viton® 514676 FDA 177.2600 white
Viton® GLT 514115 for low temperatures
Viton® GF 514141 for optimal chemical resistance
Viton® GFLT 514017 for optimal chemical resistance and low temperatures
Extreme ETP 514016 for extreme chemical resistance
® high-purity for semicon
Viton® 514204 explosive decompression
DuPont Performance Elastomers
INNOVATION QUALITY TECHNOLOGY
5
www.O-ring.info
Kalrez® perfluorelastomersThe ultimate solution
Alongside the existing standard Kalrez®
O-ring-compounds we can arrange, in
collaboration with DuPont Performance
Elastomers, the “ultimate” seal for your
application to be designed by a special
FEA computer programme.
Kalrez® Hardness Tensile Strength Compression Max. Service Colour Segment Application Compound (Shore A) (MPa) Set (%)* Temp. (°C/°F)
70h/204°C
steam, amines
sealing force
6221 70 15,16 31 260 / 500 White Pharma/Food FDA, USP
6230 75 16,54 30 260 / 500 Black Pharma/Food FDA, USP
9100 74*** 11,85 17** 300 / 572 Amber Semicon Deposition processes
translucent
8085 80 16,3 42** 240 / 464 Beige Semicon Plasma
translucent
Spectrum 75 17,91 15 327 / 620 Black Semicon Thermal
7075UP
8475 60 11,35 23** 300 / 572 White Semicon Thermal
Spectrum 75 15,16 25 275 / 527 Black Semicon Wet
6375UP
8575 62 29 300 / 527 White Semicon Selected etching, ashing
stripping and deposition
4079 75 16,88 25 316 / 600 Black Semicon Wet
2037 79 16,88 27 220 / 428 White Semicon Selected plasma and gas
deposition
1050LF 82 18,6 35 288 / 550 Black Semicon Selected wet with high
amine contentsitio
6
Sealing Elements - O-Rings
Vulc-O-ring
ERIKS has developed a new technology for
the production of O-rings in non-standard
dimensions. Due to an advanced vulcanisation
process, the O-rings are made from high-tech
cord with almost the same quality as moulded
O-rings. Extended lab tests show that the
properties as the cord.
Further advantages
Available in FDA compliant quality
Very low compression set values
Tolerances on cord of +/- 0,05 mm are possible
Rush-production possibilities
Standard compounds
O-rings: extra large O-rings moulded in 1 piece
Description ERIKS Reference
NBR 60 Black 366304
NBR 75 Black 366185
NBR 90 Black 360303
NBR 75 Black FDA/3A 366302
Viton® 60 Black 514307
Viton® 75 Black 514206
Viton® 75 Brown 514302
Viton® 75 Green 514306
Viton® 90 Black 514309
Viton® Extreme 75 Black -
Viton® 90 brown 514310
FKM EDR 90 Black -
Viton® GF Black different compounds
Viton® GLT Black different compounds
Viton® GLFT Black different compounds
EPDM 75 Black 559303
Silicone 75 Red FDA 714206
Fluorsilicone 80 Blue 614016
Aflas® 80 Black 223301
Aflas® 90 Black 223302
XNBR 75 Black 886390
... and many others.
RXXL
7
www.O-ring.info
Teflex O-ring
Engineered O-rings for critical applications.
To ensure an optimum chemical resistance we
offer a unique Viton®-compound with extreme
low compression-set which is encapsulated with
Teflon® FEP. This results in better long term
sealing and makes this encapsulated O-ring the
best in the world. Available in all dimensions
up to 5000 mm in diameter, compliant to FDA
Specialities
Silicone cord insertion
Silicone hollow cord insertion
Silicone and Viton® FDA insertion
Teflon PFA-cover for better wear resistance
Viton® extreme-cover of Viton®-cord for optimum flexibility
New development: Fully encapsulated sealing rings for
8
Sealing Elements - O-Rings
For extreme services
ERIKS offers you a number of compounds for
‘extreme services’ in their application field.
120 datasheets are available on our site!
Compounds
FKM 514322 for high chemical resistance at low
SurfaPlus® surface treatment
Specials FKM’s for biofuels
And many more
9
www.O-ring.info
O-rings with homologations/certificates
We developed a whole range of compounds for
contact with food and pharma, drinking water
and gases. We summarize the main
compounds.
Look at our website
www.O-ring.info/datasheetsto find more than 40 life science compounds!
KIWA
10
Sealing Elements - O-Rings
O-rings in special executions
ERIKS O-rings are made with the newest
technology machines.
Executions
X-rings
Micro O-rings
Vulc-O-rings
Encapsulated O-rings Teflex
PTFE O-rings
PTFE back up rings
NBR 90 back up rings
Silicone free
Labsfree
Plasma treated
With narrow tolerances
With surface-controll
With homologations
Eriflon PTFE hydraulic seals
Special bagging
Fluorinated
11
www.O-ring.info
Round and square cords
Alongside an extensive range of rubbercord
to make your own O-ring,
ERIKS produces special cords in high-tech
compounds to meet your special needs.
Ask for our special Profiles brochure.
Standard round
NBR 70 E1
NBR 90 E1
EPDM 70 E1
Viton® 70, 75 and 90 E1
Neoprene 70
Silicone FDA-USP 70 E1
Sponge NR/Neoprene/Silicone/FPM
Standard square & rectangular
Neoprene
Silicone
EPDM
FPM
Sponge NR/Neoprene/Silicone/FPM
Self-adhesive backing
Specialty extrusions in
FDA in NBR, EPDM, Viton®, Silicone
Fully transparant silicone
Silicone high temp
Fluorsilicone
Aflas®
Viton® extreme
Many others in various hardnesses
12
Sealing Elements - O-Rings
www.eriks.infoTechnical information NOW centralized available!
With technical info in multiple languages (English, Dutch, German and French) like:
Numerous technical datasheetsNumerous material safety datasheetsConstruction and installation instructionsMultiple online selection tools and calculatorsOver 4,000 pages of technical information
k h h l b
O-Rings
Oil-Seals
Rubber Technology
Industrial Plastics
Flange Gaskets
Mechanical Seals
Hydraulic Seals
On line services
ERIKS offers you a number of compounds for
‘extreme services’ in their application field.
120 datasheets are available on our site!
Technical information available in
English, Dutch, German and French.
Visit: www.O-ring.info
ERIKS offers different methods of interactive customer solutions. Free programmes are available on our websites.
400 data sheets : Industry leading
13
www.O-ring.info
Quality Control
ERIKS O-rings are of top quality. They are
produced in accordance with ISO-norms and
controlled with high precision test equipment.
Our quality assurance system and our rigid
ERIKS’ specifications are implemented at each
production. On your request certification papers
are edited according to DIN EN ISO 9002.
Extra service for your O-rings
Alongside our own standard test procedures ERIKS
offers you different possibilities for your quality
assurance system:
Surface control to Sortenmerkmal S
Specific measurement to special tolerances
Special surface control
Tear strength test
Tensile strength test
Ozone testing
Lifetime testing
Infrared spectroscopy
TGA analysis
FDA migration test
FEA calculations
14
Sealing Elements - O-Rings
Datasheets: our specifications on line
Our quality assurance is laid down in a
quality manual and in 120 datasheets which
we have developed in collaboration with
independent laboratories.
At all times these datasheets are available
on your request. Our technical staff will be
pleased to discuss these datasheets with you
in order to find the best compound for your
application. Quality within your reach!
53
01.05.2008
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
S E A L I N G E L E M E N T S
EPDM 70-compound 55111 - Technical Data Sheet
1. IntroductionThe ERIKS compound EPDM 559003 is a Peroxide cured EPDM-compound with
many approvals, good chemical resistance and better physical properties than stan-
dard sulphur cured EPDM-compounds. Compound is very suitable for water and
beverage applications.2. Product Description
3. Physical Properties
Chemical Composition :Physical form :Colour :Storage stability * :
Ethylene Propylene Diene Terpolymer, Peroxide cured
O-Rings / Mouldings Blackmax. 10 years
Test Method
Norm Test Values
Hardness
ISO 868 70° ± 5° Shore A
Specific Weight ISO 2781
1,12
Tensile Strength at break ISO 37
160%
Elongation at break ISO 37
16 N/mm2
Compression Set 22h/150°C
ISO 815 9%
3000h/110°C
ISO 815 (in water) 10%
Heat Ageing (in air), 70h/150°C ASTM D 573
Hardness Change
+1°
Volume Change
-0,1%
Weight Change
-0,1%
Ageing in water, 70h/100°C ISO 1817
Hardness Change
-1°
Volume Change
+1,5%
Weight Change
+1%4. Temperature Resistance
5. Chemical ResistanceAlkali : very good
Alcohol : goodEthers : fairFats : unsatisfactory
Hydroxides : unsatisfactory
Esters : unsatisfactory
Air : very good
Oils : unsatisfactory
Ozone : excellent
Water : very good
Steam : good up to 130°C
6. Advantages
7. Other Information ACS DVGW-W270 EN 681-1
conformity to FDA 21 CFR 177.2600 KTW NSF 51 and 61 WRC
Derived Ingredient Free).
* : Following ISO 2230 conditions
KIWA
7101.05.2008
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
S E A L I N G E L E M E N T S
Genuine Viton® X-ring 514315 - T
echnical Data Sheet
1. Introduction
Original Viton® X-ring 514315-compound is based on a 100% Genuine Viton® poly-
mer. Products out of this compound are being made according to strict guidelines of
DuPont Dow Elasomers. This guarantees a constant high quality level. All products
carry the specific, easy recognizable emblem on their package.
2. Product Description
3. Physical Properties
Chemical Composition :
Physical form :
Colour
:
Odour
:
Solubility
:
Storage stability * :
Dipolymer of Hexa-Fluoropropylene and Vinylidene Fluoride,
plus cure chemicals
X-Rings
Black
None
Low molecular weight Esters and Ketones
Excellent
Test Method
Norm
Test Values
Hardness
ISO 48 Method M 75° ± 5° IRHD
Tensile Strength at break
ISO 37
min 13 MPa
Elongation at break
ISO 37
min 211%
Specific Weight
ISO 2781
1,97
Compression Set
ISO 815
25% compression - 24h/200°C ISO 815
max 21%
Heat Ageing 70h/275°C
ISO 188
Hardness Change
max +6°
Tensile Strength Change
-35%
Weight Change
-70%
4. Temperature Resistance
5. Chemical Resistance
Concentrated acids : excellent
Acetone
: bad
Hydroxides
: excellent
Benzene
: excellent
Crude oil
: excellent
Toluene
: excellent
Fuel C
: excellent
Gasoline
: very good
BTM oil 3
: excellent
Methylene chloride : very good
MEK
: bad
MTBE
: bad
Water < 100°C : very good
6. Advantages
® labeled
7. Safety and Handling
Read and be guided by the
recommendations in the DuPont Dow
Elastomers technical bulletin
H-71129-02, ‘Handling Precautions
for Viton® and Related Chemicals’.
8. Other Information
177.2600 compliance, or:
Mil-R-83248B and AMS7276D.
* : Following ISO 2230 conditions
®
EPDMM 77770000-70---cccom0
1. IntroductionThe ERIKS compound many approvals, good dard sulphur cured EPDbeverage applications.2. Product Description
3. Physical Properties
Chemical Composition :Physical form:Colour:Storage stability * :
EOBm
Test MethodHardnessSpecific WeightTensile Strength at breakElongation at breakCompression Set22h/150°C
3000h/110°CHeat Ageing (in air), 70h/150°CHardness ChangeVolume ChangeWeight ChangeAgeing in water, 70h/100°CHardness ChangeVolume ChangeWeight Change
4. Temperature Resistance
5. Chemical ResistanceAlkali: very good
Alcohol: goodEthers: fairFats: unsatisfactory
Hydroxides: unsatisfactory
Esters: unsatisfactory
Air: very good
Oils: unsatisfactory
Ozone: exWater
* : Following ISO 2230 conditions
7101.05.2008
oned data
n other
11101.05.2008
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other laboratories, using different conditions by the preparation and evaluation of the samples.
S E A L I N G E L E M E N T S
VMQ Silicone Cord ST-EC-60-001 - Technical Data Sheet
1. IntroductionSilicone compound ST-EC-60-001 is in compliance with FDA 177.2600, USP VI and Bfr for food, pharma and medical applications. Peroxide cured. Standard cord quality compound.
2. Product Description
3. Physical Properties
Chemical Composition :Physical form :Colour :Odour :Storage stability * :
Vinyl Methyl Silicone RubberO-Rings / Mouldings / ExtrusionsTranslucentNone± 10 years
Test Method Norm Test ValuesHardness ISO 48 Method M 60° ± 5° IRHDTensile Strength at break ISO 37 min 10 MPaElongation at break ISO 37 min 450%Specific Weight ISO 2781 1,17Compression Set ISO 815 25% compression - 22h/175°C on O-Ring (3,53 mm) 25%
4. Temperature Resistance
5. Chemical ResistanceSIP : very goodCIP : badHeat Ageing : excellentSterilisation : excellent
6. Advantages
conform
FDA 177.2600 class 1 (certificate on request)
7. Other Information
3302-1E2 / ISO 3302
Ingredient Free).
* : Following ISO 2230 conditions
15
www.O-ring.info
Norm O-ring cord diameter - Available dimensions
Metric 1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0/5.5/6.0/7.0/8.0/10.0/12.0
ISO 3601-1 1.80/2.65/3.55/5.30/7.0
French Norm 1.9/2.7/3.6/5.33/6.99
JIS B 2401 1.9/2.4/3.1/3.5/5.7/8.4
American Norm AS 568 A
British Norm 1.78/2.62/3.53/5.33/6.99
BS 1806
American Norm 1.02/1.42/1.63/1.83/1.98
Specials available on request in any cross-section
And this in thousands of inside diameters in ca. 200 different compounds
Sta
ndard
A
STM
D 1
413
Maxi
mal
work
ing
tem
pera
ture
Maxi
mal
tem
pera
ture
to
att
ain
Tensi
ble
st
rength
Tearing r
esi
s-ta
nce
Abra
sion r
esi
s-ta
nce
Ozo
ne r
esi
s-ta
nce
room
tem
p.
ethylenoxide copolymer
EPDM Ethylene, propylene, terpolymer,
propylene, copolymer peroxide
crosslinked
and terpolymers
for low temperatures
aflas
Min
imum
w
ork
ing
tem
pera
ture
Properties of general elastomeric compounds
Sealing Elements - O-Rings
16
ERIKS bvPostbus 280
1800 BK Alkmaar
The Netherlands
1812 RL Alkmaar
The Netherlands
www.eriks.nl
ERIKS nvBoombekelaan 3
www.eriks.be
ERIKS sa
6040 JUMET
ERIKS sas52, Avenue des Frères-Lumière
78190 Trappes
France
postal B.P. 151
France
www.eriks.fr
ERIKS Sealing Technology Amber Way,
West Midlands, B62 8WG
T +44 121 508 6000
F +44 121 508 6255
www.eriks.co.uk
Pioneer Weston International Ltd
Birchwood Park
Warrington
WA3 6WU
www.pwi-ltd.com
ERIKS GmbH Division DichtungstechnikBrönninghauser Straße 38
33729 Bielefeld
Germany
www.eriks.de
Passerotti sp. z o.o.parcel ul. Spoldzielcow 94A
43 - 303 Bielsko - Biala
Poland
T +48 33 499 77 00
F +48 33 499 77 17
www.passerotti.pl
ERIKS sdn bhdpostal work No. 10 & 12, Jalan PJU 3/45,
Sunway Damansara Technology Park, 47810
Petaling Jaya,
Selangor Darul Ehsan,
Malaysia
T +603 7806 2500
F +603 7806 3208 / 3508
www.eriks.com.my
ERIKS Southwest, Inc.15600 Trinity Boulevard suite 100
Fort Worth, Texas 76155
T +1 817 267 8837
F +1 817 571 4700
www.eriksusa.com
ERIKS Midwest, Inc.5330 South Emmer Drive
New Berlin, WI 53151
T +1 262 785 1333
F +1 262 785 1756
www.eriksusa.com
ERIKS West, Inc.14600 Interurban Ave. South
Seattle, WA 98168
T +1 800 634 3417
F +1 206 243 4718
www.eriksusa.com
ERIKS Turpen11815 East Apache Street
Tulsa, Oklahoma 74116
T +1 800 375-0044
T +1 918 665-0044
F +1 918 665-0007
www.turpen.com
ERIKS pte ltdpostal work Blk 151, #22-22/25, Pasir
118480
T +65 6272 2405
F +65 6274 1706
www.eriks.com.sg
www.o-ring.info
