Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
To order, call 800-548-4873 1Table of ContentsLINKLI
Equipment Management Systems
accessories catalog
To order, call 800-548-4873Table of Contents 2To order, call 800-548-4873
Equipment Boom Accessories
Clinical Shelves .......................................................................................................................................3
Equipment Rails ......................................................................................................................................5
Equipment Shelves ..................................................................................................................................8
HarmonyAIR™ Smoke Evacuation System ...............................................................................................10
IV Support .............................................................................................................................................12
Medical Gas Support .............................................................................................................................18
Monitor Arms ........................................................................................................................................25
Organizational Tools ..............................................................................................................................37
How to OrderOn the following pages you will find specifications for accessories to be used on STERIS’s Ceiling Systems.
For more information about STERIS’s surgical accessories, contact your STERIS Account Manager, or call
STERIS Healthcare Customer Service at 800-548-4873.
Thank you for your business.
STERIS WarrantySTERIS is committed to customer satisfaction. STERIS will correct any defects(s) in material or workmanship
occurring during the warranty period in accordance with the following terms:
• For 12 months after the warranty start date, STERIS will provide free replacement parts for all equipment that
does not perform according to its specifications. The warranty start date is the date 30 days after STERIS ships
the equipment.
• All work on STERIS equipment during the warranty period must be performed by a qualified technician.
Additional information is available in STERIS’s Warranty and Customer Assistance Information booklet,
P-056399-116, available upon request.
Table of Contents
Clinical Shelves
To order, call 800-548-4873 3Table of Contents
Angled ShelvesThe Angled Shelves are used in the critical care environment for additional equipment shelf space and to hold patient charts. The aluminum shelves attach via the equipment rails on the EMS column and have optional Velcro straps to secure equipment.
LS1009005
LS1009006
LS1009014
LS1009015
8” W x 8” D without Velcro
13” W x 8” D without Velcro
8” W x 8” D with Velcro
13” W x 8” D with Velcro
Flat ShelvesThe Flat Shelves are used in the critical care environment for additional shelf space to hold accessories, charts, and equipment. The aluminum shelf attaches to equipment rails on the EMS column.
LS1009001
LS1009002
LS1009003
LS1009004
10” W x 8” D
10” W x 13” D
13” W x 13” D
19” W x 13” D
Workstation ShelvesThe Workstation Shelves create a flexible work surface or additional shelf space for the critical care area and will fold up when not in use to save space. The aluminum shelves mount via the equipment rail or 38mm poles.
LS1009100
LS1009103
10” W x 15” D Mounts to Extension
Rail
8” W x 12” D Mounts to 38mm Pole
LS1009005 LS1009006 LS1009014
LS1009001 LS1009004
LS1009100 DOWN LS1009100 UP
Clinical Shelves
To order, call 800-548-4873 4Table of Contents
Hinged ShelvesThe Hinged Shelves are used in the critical care environment for additional equipment shelf space. The aluminum shelves attach via the equipment rails on the equipment column and can be folded down when not in use to save space.
LS1009007
LS1009008
LS1009009
9” W x 12” D
13.5” W x 10” D
17” W x 12” D
Mayo TraysThe Mayo Tray is used in the critical care environment to provide additional shelf space when needed. The aluminum trays attach to the equipment rails on the equipment column and can be folded down or removed when not in use to save space.
LS1009010
LS1009011
LS1009012
LS1009013
13.625” W x 9.75” D Hinged
17.125” W x 11.625” D Hinged
13.625” W x 9.75” D Removable
17.125” W x 11.625” D Removable
Configurable Shelf with Drawers LS1011007
LS1011021
LS1011022
32 In C-Frame with Rails
and 2 Drawers
Drawer - Lockable - 3in hgt -
for HarmonyAIR c-frame and
counter top (not included)
Drawer - Lockable - 6in hgt -
for HarmonyAIR c-frame and
counter top (not included)
LS1009007 DOWN LS1009007 UP
LS1009010 UP LS1009010 DOWN
LS1011007LS1011021
LS1011022
Equipment Rails
5To order, call 800-548-4873Table of Contents
Compact RailThe Compact Rail attaches to an IV pole to provide four 4.5” sides for attaching snap-on accessories.
LS1018004
LS1018005
38mm IV Pole Mount
25mm IV Pole Mount
Cross RailThe Cross Rail attaches to the vertical channel of equipment column and is used to attach accessories via horizontal rails.
LS1022003
LS1022004
LS1022005
LS1022006
14” Front Cross Rail
18” Front Cross Rail
14” Front Cross Rail with 10” Side Rails
(Image Shown)
18” Front Cross Rail with 10” Side Rails
Surround RailThe Surround Rail provides 360 degrees of accessory support around the HarmonyAIR™ column.
LS1022001
LS1022002
14” Rear Surround Rail (Image Shown)
24” Rear Surround Rail
LS1018004
LS1022003 LS1022005 LS1022006
LS1022001
Equipment Rails
6To order, call 800-548-4873Table of Contents
Heavy Duty Equipment RailThe Equipment Rail attaches to a wall mount to provide flexibility to add snap-on accessories for equipment booms.
LS1002012
LS1002024
LS1002036
LS1002048
LS1002060
LS1002072
LS1002084
LS1002096
LS1002108
LS1002120
1’ W, 2 Wall Mounting Holes
2’ W, 2 Wall Mounting Holes
3’ W, 3 Wall Mounting Holes
4’ W, 3 Wall Mounting Holes
5’ W, 4 Wall Mounting Holes
6’ W, 5 Wall Mounting Holes
7’ W, 6 Wall Mounting Holes
8’W, 6 Wall Mounting Holes
9’ W, 7 Wall Mounting Holes
10’ W, 8 Wall Mounting Holes
38mm Pole Mounted RailThe 38mm Pole Mounted Rail is used to attach snap-on accessories onto accessory poles.
LS1013019
Rail Mounting Hardware - FlushThe Flush Mounting Hardware is used for wall mounting rails to equipment booms.
LS1004P01
LS1004P02
LS1004P03
Mounting for Metal Studs
Mounting for Drywall
Mounting for Masonry
LS1002024
LS1004P1, P2, P3
Equipment Rails
7To order, call 800-548-4873Table of Contents
Rail Mounting Hardware - StandoffThe Standoff Mounting Hardware is used for wall mounting heavy duty rails for equipment booms.
LS1004P04
LS1004P05
LS1004P06
Mounting for Metal Studs
Mounting for Drywall
Mounting for Masonry
Equipment Rail End CapsRail End Caps are used to cover the ends of equipment boom rails.
LS1002P01
LS1003P01
Heavy Duty (Qty 2)
Standard (Qty 2)
Replacement Side Rail KitsLight Duty Side Rail Kit (includes hardware). Order as replacement for existing rails only.
LS1022008
LS1022009
14” for Standard 17” Shelf
17” for Standard 20” Shelf
LS1004P4, P5, P6
LS1002P01 LS1003P01
LS1022008
Equipment Shelves
8To order, call 800-548-4873Table of Contents
Equipment Shelves, Large - 25.6” W X 20.9” DThese shelves mount to the front rails of the HarmonyAIR™ equipment boom column to organize your surgical equipment. For additional storage, a HarmonyAIR™ Drawer Kit (shown in image) may be ordered separately.
THSHEL01
THSHEL02
THSHEL05
THSHEL06
THDRAWLG
Large Shelf Only, 110 lbs. max load
Large Shelf with 2 Rails, 110 lbs max
load
Large Shelf with 2 Handles, 110 lbs
max load
Large Shelf with 2 Rails, 2 Handles,
110 lbs max load
Drawer Kit for Large Shelves (Includes
1 Drawer and Mounting Hardware)
Equipment Shelves, Small - 17.7” W x 16.9” DThese shelves mount to the front rails of the HarmonyAIR™ equipment boom column to organize your surgical equipment. For additional storage, a HarmonyAIR™ Drawer Kit (shown in image) may be ordered separately.
THSHES01
THSHES02
THDRAWSM
Small Shelf Only, 44 lbs max load
Small Shelf with 2 Rails, 44 lbs max
load
Drawer Kit for Small Shelf (Includes 1
Drawer and Mounting Hardware)
THSHEL01
Small Shelf & Drawer
Equipment Shelves
9To order, call 800-548-4873Table of Contents
Equipment Shelves, Extra-Large - 30” W x 25” DThese shelves mount to the front rails of the HarmonyAIR™ equipment boom column to organize your surgicalequipment.
LS17352545400
LS1735254540BK
Extra-Large Shelf with Rails,
95 lbs. max load
Extra-Large Shelf with Handles
& 2 Rails, 95 lbs. max load
Equipment Shelf with Drawer and Mousepad - 17.2” W x 14.2” DThis shelf mounts to the front rails of the HarmonyAIR™ equipment boom column and includes a drawer with a slide-out mousepad.
THSHEL4106
Shelf with Drawer and Mousepad,
33 lbs max load
LS1735254540BK
HarmonyAIR™ Smoke Evacuation System
10To order, call 800-548-4873Table of Contents
Smoke Evacuation SystemsDesigned exclusively for the HarmonyAIR equipment boom, the equipment boom integrated HarmonyAIR Smoke Evacuation System provides ideal flow for operating rooms and outpatient surgery centers. It combines customizable and variable filter life, low total cost of ownership, and a 3-port filter with filter life tracking technology.
QS0018
QS0020
Small Shelf HarmonyAIR Smoke
Evacuation System - 110V
(shelf not included)
Large Shelf HarmonyAIR Smoke
Evacuation System - 110V
(shelf not included)
Smoke Evacuation FilterDesigned to fit the HarmonyAIR Smoke Evacuation System with 4 layers of proven filtration: gross particulate, ULPA media, activated carbon, and post filter. Lasts up to 35 hours (approximately 3 months) of plume evacuation time and captures 0.1 to 0.2 micron particles at 99.999% efficiency. Hidden ports reduce the risk to caregivers of cross contamination.
QS0022
Filter Two (2) Pack
Smoke Evacuation System Sterile TubingSterile tubing available in the most common and versatile hose size of 7/8” (22mm) in diameter and lengths of 6 ft (1.8m), 10 ft (3.1m), or 14 ft (4.3m).
QS0023
QS0024
QS0025
Tubing 7/8” (22mm) x 6 feet (1.8m) -
24 Per Box
Tubing 7/8” (22mm) x 10 feet (3.1m) -
24 Per Box
Tubing 7/8” (22mm) x 14 feet (4.3m) -
5 Per Box
HarmonyAIR™ Smoke Evacuation System
11To order, call 800-548-4873Table of Contents
Smoke Evacuation System Laparoscopic TubingSterile tubing available in the most common and versatile hose size of 7/8” (22mm) in diameter and lengths of 6 ft (1.8m), 10 ft (3.1m), or 14 ft (4.3m).
QS0023
QS0024
QS0025
Tubing 7/8” (22mm) x 6 feet (1.8m) -
24 Per Box
Tubing 7/8” (22mm) x 10 feet (3.1m) -
24 Per Box
Tubing 7/8” (22mm) x 14 feet (4.3m) -
5 Per Box
Smoke Evacuation Fluid Filter TrapThe translucent design captures fluids to help maintain the integrity of the filtration system and assist with maintaining filter life. Includes measurement increments (holds up to 100 cc fluid capacity) and cap holder for easy storage during use.
QS0027
Filter Fluid Trap - 10 Per Box
Smoke Evacuation System Remote Switch ActivatorThe Remote Switch Activator device remotely turns the HarmonyAIR Smoke Evacuation System on and off in conjunction with ESU activation saving filter life. Adjustable delay can be set from 0 to 10 seconds, allowing for capture of residual plume that may be present after deactivation of electrosurgery devices.
QS0028
Remote Switch Activator
IV Support
12To order, call 800-548-4873Table of Contents
TAD™ IV Transfer SystemThe TAD™ IV Transfer System enables safe movement of infusion and other pole mounted equipment from a stationary position on a wall or boom to a hospital bed, and vice versa. The TAD™ system consists of four elements: a transfer device with IV pole, a bed attachment arm with transfer cone, a headwall or column attachment arm with transfer cone, and a mobile docking station also with a transfer cone.
LS1035202SR
TAD™ Mobile Docking Station
TAD™ IV Transfer System - Bed AdaptorsThe TAD™ IV Transfer System - Bed Adapters are designed to attach to most hospital beds. Select the adapter according to the manufacturer and model of the hospital bed.
LS1035221
LS1035220L
LS1035220R
LS1035222
TAD™ Bed Adaptor for Stryker In
Touch Bed with Cone
TAD™ Bed Adaptor for Stryker Epic II
Zoom Bed w/Cone (Left)
TAD™ Bed Adaptor for Stryker Epci II
Zoom Bed w/Cone (Right)
TAD™ Bed Adaptor for Hill Rom Total
Care with Cone
LS1035220L LS1035222LS1035221
IV Support
13To order, call 800-548-4873Table of Contents
TAD™ IV Transfer System - IV PolesThe TAD™ IV Transfer System - Transfer Device with IV Pole attaches to any patient bed, boom or mobile docking station fitted with the cone.
LS1035201
LS1035202
TAD™ Single IV Pole 27” Long, 4 Hook
TAD™ Triple IV Pole 27” Long, 8
Hangers
IV Poles, Single with Extensions, Double Rail MountThe Double Rail Mounted Single IV Poles have a 20” telescoping extension and include three hooks for IV fluid bags. Two horizontal rails are required for mounting. Cross Rails or Equipment Side Rails may be used. Rails are sold separately.
LS1014003
LS1014004
36” L IV Pole (Includes hooks,
telescoping pole, and 2 rail mounts)
48” L IV Pole (Includes hooks,
telescoping pole, and 2 rail mounts)
LS1035202LS1035201
LS1014003
IV Support
14To order, call 800-548-4873Table of Contents
IV Poles, Single with Extensions, Single Rail MountThe Single Rail Mounted IV Poles have a short block fixed mount and include a telescoping extension and three hooks for IV bags. One horizontal Cross Rail or Equipment Rail is required for mounting. Rails are sold separately.
LS1014005
LS1014006
LS1014007
16” L IV Pole (Includes hooks,
10” telescoping pole, and rail mount)
24” L IV Pole (Includes hooks,
15” telescoping pole, and rail mount)
30” L IV Pole (Includes hooks,
20” telescoping pole, and rail mount)
IV Poles, 36” L with Extensions, Swivel MountThe 36” L IV Poles have a 20” L telescoping extension with swivel mount. The swivel mount has a snap action adapter to attach to horizontal rails. Horizontal rails are sold separately.
LS1014001
LS1014002
LS1014P24
Single IV Pole with 10” L Swivel Arm
Double IV Pole with Double 12”
L Swivel Arm
Single Swivel 10” Arm Only
LS1014005 LS1014006
LS1014001 LS1014002
IV Support
15To order, call 800-548-4873Table of Contents
Pole Mount IV Extension Arm The IV Extension Arm can be used to extend the distance of the 1” diameter IV poles out from the EMS column. The IV poles must be ordered separately.
LS1014008
LS1014010
Double Arm (300mm & 500mm) -
Mounts to 38mm Pole (Arm Only)
Single Arm (300mm) - Mounts to
38mm Pole (Arm Only)
IV Extension Arm The IV Extension Arm can be used to extend the distance of the 1” diameter IV poles out from the EMS column. The IV poles must be ordered separately.
LS1018061
LS1018066
LS1022031
LS1022032
LS1022033
Fixed Mount IV Pole Extension Arm
Adapter to Add 2nd IV Pole to
Existing IV Pole
Double Arm (300mm & 500mm) -
Mounts to Harmony Air Channel
(Arm Only)
Single Arm (500mm) - Mounts to
Harmony Air Channel (Arm Only)
Single Arm (300mm) - Mounts to
Harmony Air Channel (Arm Only)
Cable Management Extension ArmThe Cable Management Extension Arm attaches to equipment boom columns via an Equipment Rail. This Extension Arm extends 32” out from the column and is used to manage patient leads and hoses. Equipment Rail sold separately.
LS1018068
LS1014010
LS1018061
IV Support
16To order, call 800-548-4873Table of Contents
IV Pump Rail Mount PoleThe 6” IV Pump Rail Mount Pole attaches via an Equipment Rail and is used for IV pumps. Equipment Rail sold separately.
LS1014P11
IV Pole Mounting Posts and HoldersThe IV Pole Mounting Posts and Holders are used with 1” diameter IV poles.
LS1018074
LS1013024
LS1013022
LS1018062
3” H, Mounts to Harmony EMS
Vertical Channel
4” H, Mounts to Equipment Rail
Universal IV Pole Holder for Ø25mm -
Ø38mm poles
Block for Mounting IV Pole to
Equipment Rail
IV Poles and Pole ComponentsA variety of 1” IV poles and pole components that can be mounted to IV extension arms.
LS1014P01
LS1014P02
LS1014P03
LS1014P04
LS1014P05
LS1014P06
LS1014P07
Harmony EMS 2 Hook IV Hanger Head
Only 4” H, Harmony
EMS 3 Hook IV Hanger Head Only
Harmony EMS 1’ Length - 25mm IV
Pole Only
Harmony EMS 2’ Length - 25mm IV
Pole Only
Harmony EMS 3’ Length - 25mm IV
Pole Only
Harmony EMS Sgl 3’ Length IV Pole W
20” Ext & 3 Hooks
Fixed Rail Mount For 1” IV Pole
LS1018074
LS1014P01 LS1014P02 LS1014P03
LS1014P06 LS1014P07
IV Support
17To order, call 800-548-4873Table of Contents
Pump SupportPump Support, Double Pole, 28mm Diameter for HarmonyAIR™
THPUM6128
Scope HolderScope holder is used to hang GI scopes when not in use. Double rail mounts included.
LS1014105
LS1014106
LS1014114
36” Pole w/ Aluminum Scope Holder
Kit (Includes Double Rail Mount,
20” Telescoping)
36” Pole w/ Aluminum Scope Holder -
Pole with one mounting bracket
36” Pole w/ Vinyl Scope Holder Kit
(Includes Double Rail Mount,
20” Telescoping)LS1014106 1014-114LS1014105
Medical Gas Support
18To order, call 800-548-4873Table of Contents
Gas Hoses: DISS - ChemetronDISS-Chemetron gas hose assemblies of varying lengths with connector
LS1007005
LS1007008
LS1007011
LS1007105
LS1007108
LS1007111
LS1007205
LS1007208
LS1007211
24” L, Oxygen
24” L, Vacuum
24” L, Medical Air
36” L, Oxygen
36” L, Vacuum
36” L, Medical Air
48” L, Oxygen, 90° Connector
48” L, Vacuum, 90° Connector
48” L, Medical Air, 90° Connector
Gas Hoses: DISS - DISSDISS-DISS gas hose assemblies of varying lengths with connector.
LS1007001
LS1007002
LS1007003
LS1007101
LS1007102
LS1007103
LS1007202
LS1007203
LS1007218
LS1007219
LS1007220
24” L, Oxygen
24” L, Vacuum
24” L, Medical Air
36” L, Oxygen
36” L, Vacuum
36” L, Medical Air
48” L, Vacuum
48” L, Medical Air
48” L, Oxygen, 90° Connector
48” L, Vacuum, 90° Connector
48” L, Medical Air, 90° Connector
Medical Gas Support
19To order, call 800-548-4873Table of Contents
Gas Hoses: DISS - DISS HandnutHarmonyAIR™ Equipment Boom DISS-DISS hand nut hose assemblies of varying lengths with connector.
LS1007301
LS1007302
LS1007303
LS1007311
LS1007312
LS1007313
LS1007321
LS1007322
LS1007323
24” L, Oxygen, 90° Connector
24” L, Vacuum, 90° Connector
24” L, Medical Air, 90° Connector
36” L, Oxygen, 90° Connector
36” L, Vacuum, 90° Connector
36” L, Medical Air, 90° Connector
48” L, Oxygen, 90° Connector
48” L, Vacuum, 90° Connector
48” L, Medical Air, 90° Connector
Gas Hoses: DISS - OhmedaDISS-Ohmeda gas hose assemblies of varying lengths with connector.
LS1007004
LS1007007
LS1007104
LS1007107
LS1007204
LS1007207
LS1007210
24” L, Oxygen
24” L, Vacuum
36” L, Oxygen
36” L, Vacuum
48” L, Oxygen, 90° Connector
48” L, Vacuum, 90° Connector
48” L, Medical Air, 90° Connector
Gas Hoses: DISS - PuritanDISS-Puritan gas hose assemblies of varying lengths with connector.
LS1007006
LS1007009
LS1007012
LS1007106
LS1007109
LS1007112
LS1007206
LS1007209
LS1007212
24” L, Oxygen
24” L, Vacuum
24” L, Medical Air
36” L, Oxygen
36” L, Vacuum
36” L, Medical Air
48” L, Oxygen, 90° Connector
48” L, Vacuum, 90° Connector
48” L, Medical Air, 90° Connector
Medical Gas Support
20To order, call 800-548-4873Table of Contents
Gas Blocks: 1/8” NPTHarmonyAIR™ Equipment Boom Gas Blocks allow users to extend outlet location anywhere from a fixed point on a supply column or supply head to any rail location. Hose assembly is sold separately.
LS1105001
LS1105011
LS1115001
LS1115006
LS1125011
LS1205001
LS1205111
LS1215111
LS1225001
LS1225011
Oxygen Single, Front Connect
Oxygen Single, Front Connect
with Diss Side
Vacuum Single, Front Connect
Vacuum Single, Front Connect
Medical Air Single, Front Connect
with Diss Side
Oxygen Double Front Connect
Oxygen Double, Front Connect
with 2 Diss Side
Vacuum Double, Front Connect
with 2 Diss Side
Medical Air Double, Front Connect
Medical Air Double, Front Connect
with 2 Diss Side
Gas Blocks: ChemetronHarmonyAIR™ Equipment Boom Gas Blocks allow users to extend outlet location anywhere from a fixed point on a supply column or supply head to any rail location. Hose assembly is sold separately.
LS1105004
LS1105014
LS1115004
LS1125004
LS1125014
LS1205004
LS1205014
LS1215004
LS1225004
LS1225014
Oxygen Single, Front Connect
Oxygen Single, Side Connect
Vacuum Single, Front Connect
Medical Air Single, Front Connect
Medical Air Single, Side Connect
Oxygen Double, Front Connect
Oxygen Double, Side Connect
Vacuum Double, Front Connect
Medical Air Double, Front Connect
Medical Air Double, Side Connect
Medical Gas Support
21To order, call 800-548-4873Table of Contents
Gas Blocks: DISSHarmonyAIR™ Equipment Boom Gas Blocks allow users to extend outlet location anywhere from a fixed point on a supply column or supply head to any rail location. Hose assembly is sold separately.
LS1105002
LS1105012
LS1115002
LS1125002
LS1125012
LS1205002
LS1205012
LS1215002
LS1225002
LS1225012
Oxygen Single, Front Connect
Oxygen Single, Side Connect
Vacuum Single, Front Connect
Medical Air Single, Front Connect
Medical Air Single, Side Connect
Oxygen Double, Front Connect
Oxygen Double, Side Connect
Vacuum Double, Front Connect
Medical Air Double, Front Connect
Medical Air Double, Side Connect
Gas Blocks: OhmedaHarmonyAIR™ Equipment Boom Gas Blocks allow users to extend outlet location anywhere from a fixed point on a supply column or supply head to any rail location. Hose assembly is sold separately.
LS1105003
LS1105013
LS1115003
LS1125003
LS1125013
LS1205003
LS1205013
LS1215003
LS1225003
LS1225013
Oxygen Single, Front Connect
Oxygen Single, Side Connect
Vacuum Single, Front Connect
Medical Air Single, Front Connect
Medical Air Single, Side Connect
Oxygen Double, Front Connect
Oxygen Double, Side Connect
Vacuum Double, Front Connect
Medical Air Double, Front Connect
Medical Air Double, Side Connect
Medical Gas Support
22To order, call 800-548-4873Table of Contents
Gas Blocks: PuritanHarmonyAIR™ Equipment Boom Gas Blocks allow users to extend outlet location anywhere from a fixed point on a supply column or supply head to any rail location. Hose assembly is sold separately.
LS1105005
LS1105015
LS1115005
LS1125005
LS1125015
LS1205005
LS1205015
LS1215005
LS1225005
LS1225015
Oxygen Single, Front Connect
Oxygen Single, Side Connect
Vacuum Single, Front Connect
Medical Air Single, Front Connect
Medical Air Single, Side Connect
Oxygen Double, Front Connect
Oxygen Double, Side Connect
Vacuum Double, Front Connect
Medical Air Double, Front Connect
Medical Air Double, Side Connect
Gas Splitter Blocks: 1 Chemetron - 2 DISS FrontThis Chemetron Gas Block Splitter is used to convert from 1 Chemetron port to 2 DISS front ports.
LS1006009
Oxygen
LS500063 Vacuum
LS1006008 Medical Air
Gas Splitter Blocks: 1 DISS - 2 DISS FrontThis DISS Gas Block Splitter is used to convert from 1 DISS port to 2 DISS ports.
LS1006017
Oxygen
LS1006018 Vacuum
LS1006016 Medical Air
LS1006009
LS1006017
Medical Gas Support
23To order, call 800-548-4873Table of Contents
Gas Splitter Blocks: 1 Ohmeda - 2 DISS FrontThis Ohmeda Gas Block Splitter is used to convert from 1 Ohmeda port to 2 DISS Ports.
LS1006007
Oxygen
LS500066 Vacuum
LS1006005 Medical Air
Ventilator Manifold with BlenderThe Ventilator Manifold allows users to bring oxygen and air to one common point and attach a blender device (such as a Bird Blender). The blender device slides into the center of the adapter and blends oxygen and air for use in a ventilator. This blender manifold uses DISS connections and requires additional hose assemblies to bring gases into the manifold from the wall outlet. There are extra oxygen and air connections so that the gases may also be used individually even when the blender is utilized.
LS1006001
2 Air, 2 Oxygen
LS1006002 3 Air, 3 Oxygen
Mounting Bracket for Bird BlenderThe Mounting Bracket for Bird Blenders attaches to equipment boom column mounted equipment rails and are used in conjunction with Ventilator Manifolds sold separately.
LS1013023
LS1006007
LS10006001 LS10006002
Medical Gas Support
24To order, call 800-548-4873Table of Contents
E-Cylindar Tank HolderThe E-cylinder Tank Holder attaches to an equipment rail and holds E-sized cylinders up to 22-3/4” in height and 4-1/2” in diameter. Tank not included.
LS1013015
Argon Tank HolderThe Argon Tank Holder mounts to equipment boom columns and provides optimal space management. Tank not included.
LS1013035
Monitor Arms
25To order, call 800-548-4873Table of Contents
Flexion-Port Variable Height VESA Monitor ArmVariable height arm with VESA 75/100mm mounting plate. Directly mounts to HarmonyAIR column. Tilt Range 30 degrees.
THMON3311
THMON3313
THMON3211
THMON3212
THMON2218
THMON4211
THMON4212
15.8” Variable Height Arm with VESA
Mounting Plate 6.6 to 22 lb.
15.8” Variable Height Arm with VESA
Mounting Plate 17.6 to 30.8 lb.
23.6” Variable Height Arm with VESA
Mounting Plate 6.6 to 22 lb.
23.6” Variable Height Arm with VESA
Mounting Plate 17.6 to 30.8 lb.
11.8” + 13.8” Variable Height Arm
with VESA Mounting Plate 6.6 to
22 lb.
15.8” + 13.8” Variable Height Arm
with VESA Mounting Plate 6.6 to
22 lb.
15.8” + 13.8” Variable Height Arm
with VESA Mounting Plate 17.6 to
30.8 lb.
Flexion-Port Variable Height VESA Universal Monitor/ Workstation ArmVariable height arm with VESA 75/100mm mounting plate. Directly mounts to HarmonyAIR column. Tilt Range 30 degrees.
THMON3323
THMON6163
15.8” Variable Height Arm with VESA
Mounting Plate 17.6 to 30.8 lb.
15.8” + 13.8” Variable Height Work
Station 17.6 to 30.8lb.
Variable Height Single Arm VESA
Variable Height Double Arm VESA
THMON3323THMON6163
Monitor Arms
26To order, call 800-548-4873Table of Contents
Flexion-Port Variable Height Universal Patient Monitor ArmVariable height arm with Universal Patient Monitor mounting plate. Directly mounts to HarmonyAIR column. Tilt Range 30 degrees.
THMON5333
THMON6112
11.8” Variable Height Arm with
Universal Monitor Mounting Plate
17.6 to 30.8 lb.
15.8” + 13.8” Extension Variable
Height Arm with Universal Monitor
Mounting Plate 17.6 to 30.8 lb.
MF-Port Fixed Height VESA Monitor ArmVariable height arm with 12.6” extension and VESA 75/100mm mounting plate. Directly mounts to HarmonyAIR column.Tilt Range 30 degrees.
THMON1111
THMON2111
Flush Rigid VESA Mounting Plate
0 to 30.8 lb.
7.6” Rigid Fixed Height Single Arm
with VESA Mounting Plate 0 to
30.8 lb.
Variable Height Single Arm VESA
THMON1111 THMON2111
Monitor Arms
27To order, call 800-548-4873Table of Contents
Monitor Holder - Double ArticulationFlat panel monitor holder, double articulation for HarmonyAIR™ Equipment Booms.
THMON3111
Arm length: 12.6 in - VESA 75 or 100 -
Load capacity: 30.8 lbs.
THMON4111 Arm length: 12.6 in. - 12.6 in - VESA 75
or 100 - Load capacity: 33 lbs.
Monitor Holder - Single ArticulationFlat panel monitor holder, single articulation for HarmonyAIR™ Equipment Booms.
THMON1113
VESA 75 or 100 - Load capacity:
30.8 lbs.
Monitor Holder - Double ArticulationMonitor holder, double articulation with height adjustment (spring) for HarmonyAIR™ Equipment Booms.
THMON3323
Depth adjustable Arm length:
15.8 in - VESA 75 or 100
THMON4111THMON3111
Monitor Arms
28To order, call 800-548-4873Table of Contents
Monitor Holder - Double Articulation with Keyboard HolderFlat panel monitor holder, double articulation with keyboard holder and mouse support for HarmonyAIR™ Equipment Booms.
THMON3163
Arm length: 12.6 in - VESA 75
or 100 - Load capacity: 30.8 lbs.
Monitor Holder - Triple ArticulationFlat panel monitor holder, triple articulation with keyboard and mouse support for HarmonyAIR™ Equipment Booms.
THMON4163
Height adjustment (spring) Arm
length: 15.8 in - VESA 75 or 100
- Load capacity: 6.6 - 22.0 lbs.
Monitor Holder - Single ArticulationFlat panel monitor holder, single articulation for HarmonyAIR™ Equipment Booms.
THMON1111
Vertical tilt - VESA 100 - Load capacity:
39.6 lbs.
Monitor Arms
29To order, call 800-548-4873Table of Contents
VESA 100 AdaptorVESA 100 to VESA 75 Adaptor for THMON1115 Monitor Holder
THOPT004
Monitor Holder - Single ArticulationFlat panel monitor holder, single articulation for HarmonyAIR™ Equipment Booms.
THMON2123
Depth adjustable Arm length: 7.6 in.
VESA 75 or 100 Load capacity: 30.8 lbs.
Monitor Holder - Double ArticulationFlat panel monitor holder, double articulation for HarmonyAIR™ Equipment Booms.
THMON3123
Depth adjustable Arm length:
12.6 in - VESA 75 or 100 - Load
capacity: 30.8 lbs.
Monitor Arms
30To order, call 800-548-4873Table of Contents
Monitor Holder - Triple ArticulationFlat panel monitor holder, triple articulation for HarmonyAIR™ Equipment Booms.
THMON4123
Depth adjustable Arms length:
12.6 in - 12.6 in - VESA 75 or 100 -
Load capacity: 30.8 lbs.
Monitor Holder - Single ArticulationMonitor holder, single articulation for HarmonyAIR™ Equipment Booms.
THMON2133
Arm length: 7.6 in - Sliding assembly -
Load capacity: 30.8 lbs.
Monitor Holder - Double Articulation Montitor holder, double articulation for HamonyAIR™ Equipment Booms.
THMON3133
Arm length: 12.6in. Sliding assembly -
Load capacity: 30.8 lbs.
Monitor Arms
31To order, call 800-548-4873Table of Contents
Monitor Holder - Triple ArticulationMonitor holder, triple articulation for HarmonyAIR™ Equipment Booms.
THMON4133
Arms length: 12.6 in. - 12.6 in. Sliding
assembly - Load capacity: 30.8 lbs.
MF-Port Fixed Height Philips ArmFixed height arm for Philips MX400-800 mounting plate. Directly mounts to HarmonyAIR column. Tilt Range 30 degrees.
THMON5133
13.7” Pivot Fixed Height Single Arm
with Philips Mounting Plate 0 to
30.8 lb.
Philips Monitor Support ArmPhilips Patient Monitor Arm, Adj.
THMON2144
5.0in. Arm Length, 31 Lbs. max load
THMON3344 15.8in. Arm Length, 31 Lbs. max load
Monitor Adaptor for Nihon KohenMonitor Adaptor with Sliding Assembly Adaptor for Nihon Kohen
THOPT005
THMON2144
Monitor Arms
32To order, call 800-548-4873Table of Contents
GCX M Series Fixed Heigh Monitor Arms (VESA)Fixed height arm with VESA 75/100mm mounting plate for a monitor. Requires GCX Channel Adapter to mount toHarmonyAIR column. Tilt Range 30 degrees Load capacity: 30 lbs
GCFLP000901
GCFLP000902
GCFLP000903
GCFLP000904
GCFLP000905
GCFLP000906
8” Length M Series Fixed Height Arm
with VESA Mounting Plate
12” Length M Series Fixed Height Arm
with VESA Mounting Plate
16” Length M Series Fixed Height Arm
with VESA Mounting Plate
Flush Mount M Series Fixed Height
VESA Mounting Plate
8” x 8” Length M Series Fixed Height
Arm with VESA Mounting Plate
12” x 12” Length M Series Fixed
Height Arm with VESA Mounting
Plate
GCX M Series Dual Fixed Heigh Monitor Arms (VESA)Dual fixed height arm with VESA 75/100mm mounting plate for two monitors. Must order swivel only arm and a dual monitor arm to complete the product. Requires GCX Channel Adapter to mount to HarmonyAIR column. Tilt Range 30 degrees. Load capacity: 30 lbs
GCWMM000504
GCFLP000811
GCFLP000828
M Series Flush Mount with Swivel-
Only Front End
Dual Bracket for 15 to 21”/38.1 to
53.3 cm Monitors
Dual Bracket for 22 to 26”/55.9 to
66 cm Monitors
GCFLP000904 GCFLP000901 GCFLP000905
M Series Dual Monitor Mount
GCWMM000504 GCFLP000811
Monitor Arms
33To order, call 800-548-4873Table of Contents
GCX VHM-P - Variable Height Monitor ArmsVariable height non-locking arm with VESA 75mm/100mm mounting plate for a monitor. Arms are available in twoweight capacity ranges. Requires GCX Channel Adapter to mount to HarmonyAIR column.
GCWS001209
GCWS001210
GCWS001229
GCWS001230
GCWS001231
GCWS001232
VHM-P (Non-Locking) Variable Height
Arm with VESA Plate (25 to 45 lb)
VHM-P (Non-Locking) Variable Height
Arm with VESA Plate (15 to 30 lb)
VHM-P (Non-Locking) Variable Height
Arm with 8” Extension and VESA Plate
(25 to 45 lb)
VHM-P (Non-Locking) Variable Height
Arm with 14” Extension and VESA
Plate (25 to 45 lb)
VHM-P (Non-Locking) Variable Height
Arm with 8” Extension and VESA Plate
(15 to 30 lb)
VHM-P (Non-Locking) Variable Height
Arm with 14” Extension and VESA
Plate (15 to 30 lb)
GCX VHM-PL - Variable Height Monitor ArmsVariable height locking arm with VESA 75mm/100mm mounting plate for a monitor. Arms are available in two weight capacity ranges. Requires GCX Channel Adapter to mount to HarmonyAIR column.
GCWS001273
GCWS001275
VHM-PL (Locking) Variable Height Arm
with 9” Riser for VESA Mounting Plate
(11 to 30 lb)
VHM-PL (Locking) Variable Height Arm
with 9” Riser for VESA Mounting Plate
(20 to 45 lb)
VHM-P Variable Height Monitor Arm
GCWS001210 GCWS001231
VHM-PL Variable Height Monitor Arm
GCWS001273
Monitor Arms
34To order, call 800-548-4873Table of Contents
GCX VHM-P - GE Carescape B650 Monitor Support ArmVariable height non-locking arm with sliding plate for the GE Carescape B650 physiologic monitor. Requires GCX ChannelAdapter to mount to HarmonyAIR column. Arm length: 12.6 in. - Load capacity: 30.8 lbs - Sliding assembly
GCWS001204
GCWS001223
GCWS001224
VHM-P (Non-Locking) Variable Height
Arm with Slide-In Mounting Plate
VHM-P (Non-Locking) Variable Height
Arm with 8” Extension and Slide-In
Mounting Plate
VHM-P (Non-Locking) Variable Height
Arm with 14” Extension and Slide-In
Mounting Plate
GCX VHM-PL - GE Carescape B650 Monitor Support ArmVariable height locking arm with sliding plate for the GE Carescape B650 physiologic monitor. Requires GCX Channel Adapter to mount to HarmonyAIR column. Arm length: 12.6 in. - Load capacity: 30.8 lbs
GCWS001201
GCWS001227
GCWS001228
VHM-PL (Locking) Variable Height Arm
with Slide-In Mounting Plate
VHM-PL (Locking) Variable Height
Arm with 8” Extension and Slide-In
Mounting Plate
VHM-PL (Locking) Variable Height
Arm with 14” Extension and Slide-In
Mounting Plate
GCWS001223 GCWS001204
GCWS001201 GCWS001201 GCWS001227
Monitor Arms
35To order, call 800-548-4873Table of Contents
GCX VHM-PL - GE Carescape Monitor Arm Hooks/ Lead Organizer (Optional)Hooks or lead organizers that can be attached to VHM-P or VHM-PL GE Carescape arms.
GCWMM000613
GCWMM000614
GCWS000325
Dual Cable Hooks with 3” Spacer for
Cable Management
Quad Hooks with 3” Spacer for Cable
Managment
Patient Lead Organizer for M/VHM
Applications with Vertical Cuff
Storage
GCX VHM-P - Philips IntelliVue MX600/700/800 Monitor Support ArmVariable height non-locking arm with sliding plate for the Philips MX600/700/800 physiologic monitor. Requires GCX Channel Adapter to mount to HarmonyAIcolumn.Arm length: 12.6 in. Sliding assembly. Load capacity: 30.8 lbs
GCPH007701
GCPH007748
GCPH007749
VHM-P (Non-Locking) Variable Height
Arm with Slide-In Mounting Plate
VHM-P (Non-Locking) Variable Height
Arm with 8” Extension and Slide-In
Mounting Plate
VHM-P (Non-Locking) Variable Height
Arm with 14” Extension and Slide-In
Mounting Plate
GCWMM000613 GCWMM000614 GCWS000325
GCPH007701 GCPH007748 GCPH007701
Monitor Arms
36To order, call 800-548-4873Table of Contents
GCX VHM-PL - Philips IntelliVue MX600/700/800 Monitor Support ArmVariable height locking arm with sliding plate for the the Philips MX600/700/800 physiologic monitor. Requires GCX Channel Adapter to mount to HarmonyAIR column. Arm length: 12.6 in. Load capacity: 30.8 lbs
GCPH007702
GCPH007704
GCPH007705
VHM-PL (Locking) Variable Height Arm
with Slide-In Mounting Plate
VHM-PL (Locking) Variable Height
Arm with 8” Extension and Slide-In
Mounting Plate
VHM-PL (Locking) Variable Height
Arm with 14” Extension and Slide-In
Mounting Plate
HarmonyAIR 7 Inch Channel AdapterThis channel adapter is bolted to the HarmonyAIR vertical channel and provides a GCX channel that can accommodate a variety of GCX arms.
GCSTO000181
GCX 7 INCH CHANNEL ADAPTER
GCPH007702 GCPH007702 GCPH007704
Organizational Tools
37To order, call 800-548-4873Table of Contents
Adapter for Sharps HolderThe adapter for Sharps disposal containers attaches to an equipment rail for easy access. Sharps disposal container not included.
LS500085
Catheter HoldersThe Catheter Holder attaches to an equipment rail for easy access. Catheters not included.
LS1013005
Small Holder 7” W x 5” D x 7” H
LS1013006 Long Holder 6” W x 4” D x 18” H
Antiseptic Handrub and Disinfectant Wipes Mounted HoldersThe Disinfectant Wipes Holder attaches to an equipment rail for easy access. Antiseptic handrub and disinfectant wipes not included.
LS1018S02
LS1018S03
LS1018S01
For 17 oz Alcare Plus® Antiseptic
Handrub
For 9 oz Alcare Plus® Antiseptic
Handrub
For Coverage® and Coverage Plus®
Germicidal Surface Wipes
LS1013005
LS1018S02
Organizational Tools
38To order, call 800-548-4873Table of Contents
Flex Arm Respiratory Circuit HolderThe Flex Arm Respiratory Circuit Holder attaches to an equipment rail for easy access. Respiratory circuit not included.
LS1013028
Glove Box HoldersThe Glove Box Holder attaches to an equipment rail for easy access. Gloves not included.
LS1013002
LS1013003
1 Glove Box
Up to 2 Glove Boxes
Ophthalmoscope HoldersThe Welch Allyn 767 Series Ophthalmoscope Holder attaches to an equipment rail for easy access. Scope not included.
LS1013511
LS1013512
LS1012P55
LS1013011
Welch Allyn 777 series
Welch Allyn 777 series,
Speculum Holder
Welch Allyn 777 series,
Thermometer Holder
LS1013002
LS1013511 LS1013512 LS1012P55 LS1013011
Organizational Tools
39To order, call 800-548-4873Table of Contents
Speculum Container HolderThe Speculum Container Holder attaches to an equipment rail for easy access. Speculum not included.
LS1013012
Thermometer HolderThe Welch Allyn Thermometer Holder attaches to an equipment rail for easy access. Thermometer not included.
LS1013045
Transducer HolderThe Transducer Holder has variable height adjustability with 23.75” L pole. It attaches to an equipment rail for easy access. Transducer not included.
LS1013025
LS1013012
Organizational Tools
40To order, call 800-548-4873Table of Contents
Universal Manometer HolderThe Universal Manometer Holder attaches to an equipment rail for easy access. Manometer not included.
LS1013016
Universal Resuscitator HolderThe Universal Resuscitator Holder attaches to an equipment rail. Resuscitator bag not included.
LS1013004
Universal Sharps Container HolderThe Universal Sharps container Holder attaches to an equipment rail for easy access. Sharps Container not included.
LS1013009
Universal Waste Basket HolderThe Universal Waste Basket Holder attaches to an equipment rail for easy access. Waste Basket not included.
LS1013021
Organizational Tools
41To order, call 800-548-4873Table of Contents
Vacuum Bottle Slide HolderThe Vacuum Bottle slide snap action mounting adapter holds a surgical fluid canister. Plastic disposable holder and vacuum bottle not included.
LS1008001
Thermometer Holders
LS1013044
Holder, Rail Mount, Exergen Temporal
Thermometer # 134201 (by others)
LS1013056
Holder, Rail Mount, Exergen Temporal
Thermometer Wall Mount #134305 &
134306 (by others)
LS1013044
Organizational Tools
42To order, call 800-548-4873Table of Contents
Holders
LS1013038
LS1013039
LS1013040
LS1013041
LS1013046
LS1013047
LS1013048
LS1013097
LS1013098
LS1013099
LS1013103
LS1013185
LS1013202
LS1013211
LS1013210
Holder, BD Sharps Wall Collector
Bracket for 5.4 qt, # 305447
Holder, Large Kendall Sharps
Container, Set of Two
Holder, Daniels Sharpsmart
Holder, Standard Kendall Sharps
Holder, Stericycle 2 gallon Sharps,
Lockable Cabinet (model
# OC-02-2004)
Holder, Hidden Bracket Sharps-A-
Gator, #31158960
Holder, Daniels Sharpsmart Holder,
Locking Wall Bracket, PN LH
4000300000 RH 4000400000 ( used
with Daniels S22 model Sharps)
Holder, BD Recykleen Cabinet Sharps,
PN 305096
Holder, Kendall Sharps, #8836SA
Holder, BD Sharps Wall Cabinet for 5.4
qt, #305017
Holder, Stericycle Sharps, Locking Wall
Mount, PN 0203WMA
Holder, Stericycle 3 or 4 gallon Sharps,
Lockable Cabinet
Holder, Medline Wire Sharps Bracket
PN# MDS707912, Rail Mounting
Holder, Large 10” x 12” Universal
Bracket, Rail Mounting with hardware
Holder, Medium 8” x 10” Universal
Bracket, Rail Mounting with Hardware
LS1013039 LS1013046 LS1013046
LS1013046 LS1013047 LS1013211
LS1013210
Organizational Tools
43To order, call 800-548-4873Table of Contents
Universal Soap/Hand Sanitizer/Lotion Holder
LS1013112
Holder, Universal Soap, Hand Sanitizer
or Lotion for Rail Mount
Towel Dispenser Holders
LS1013172LS1013078
LS1013076LS1013075
LS1013082
LS1013085
LS1013170
LS1013171
LS1013172
LS1013173
LS1013174
LS1013182
LS1013191
LS1013196
Towel Dispenser, Kimberly Clark,
In-Sight Sanitouch, Hard Roll,
# 09990 / 09995 / 09996
Holder,Towel Dispenser, Universal
Windows Series, Kimberly Clark,
#9905/#9906
Holder,Towel Dispenser, Chrome/White
GP, PN# 56620/56601
Holder,Towel Dispenser, GP, EnMotion,
PN# 59498
Holder,Towel Dispenser, GP, EnMotion,
PN# 59466
Towel Dispenser, Multifold Stainless GP,
PN 54720
Towel Dispenser, Brobrick Stainless
Steel Multifold
Towel Dispenser, GP, Sofpull,
PN# 58470
Towel Dispenser, GP, Softpull/
Centerpull, PN# 58008
Towel Dispenser, Kimberly Clark,
Insight,Compact, Scottfold
PN# 09215
LS1013075
LS1013076
LS1013077
LS1013078
LS1013079
LS1013081
Tri Fold Towel Dispenser, Rail Mount
Towel Dispenser, GP, Enmotion,
PN# 59462
Towel Dispenser, GP, Cromatic,
PN# HDS200B
Towel Dispenser, GP Combination
C-Fold/Multifold/BigFold, # 56650/01
Towel Dispenser, GP, Enmotion,
PN# 59488
Kimberly Clark, Scottfold Towel
Dispenser, #09903 / 09904
Organizational Tools
44To order, call 800-548-4873Table of Contents
Soap/Sanitizer Dispenser Holders
LS1013071
Rail Mount Adapter EnMotion
Automated Touchless Soap/Sanitizer
Dispenser, PN#52052/52053/52054
LS1013093 Ecolab 7 oz Quick Care Sanitizer
Foam,Rail Mount Adapter
LS1013094 Ecolab 15 oz Quick Care Sanitizer
Foam,Rail Mount Adapter
Wipes Holders
LS1013090
Rail Mount Adapter Ecolab Aseptic
Wipes (requires Ecolab Holder)
LS1013095 Canister Wall Bracket for Cavicide
Caviwipes
LS1013111 Universal Wipes for Rail Mounting
LS1013183 PDI Sani Bracket for individual wipes
box (Bracket supplied by others)
LS1018S01 Holder for Steris Germicidal Surface
Wipes, 1608-65, Rail Mount
Snap Action Mounting AdapterThe Snap Action Mounting Adapters has 2 holes and attaches to an equipment rail to allow mounting options for support equipment.
LS1001002
With Horizontal Holes
LS1013094
Organizational Tools
45To order, call 800-548-4873Table of Contents
Double Snap Action AdapterThe Double Snap Action Adapter attaches to an equipment rail to allow mounting options for support equipment. Adapter is 3” W and can be snapped onto the equipment rail or attached with an Allen wrench.
LS1001012
LS1001011
With 2 Holes
With 4 Holes
Telephone Mounting PlateThe Telephone Mounting Plate is used to attach a telephone to a Harmony EMS column. Telephone not included. Attaches to Horizontal Equipment Rail
LS1013027
Cable and Hose ManagementThe Clip Organizer attaches to an equipment rail and is used to organize various supplies. The Hose and Cable Clip Organizer attaches to an equipment rail and is used to organize hoses and cables to prevent trip hazards.
LS1013033
3 Clip Organizer
LS1013007 3 Hose and Cable Organizer
LS1013029 6 Clip Organizer
LS1013008 6 Hose and Cable Organizer
THMON3123
LS1013033
LS1013007
LS1013029
LS1013008
Organizational Tools
46To order, call 800-548-4873Table of Contents
Cable Management Cord Wrap MountCable Management Cord Wrap Mount attaches to an equipment rail to prevent cord trip hazards on the floor.
LS1013026
Cable WindersCable Winders (2) with Cover Strip for HarmonyAIR™ equipment booms, includes Mounting Hardware
THOPT2004
Task Light SupportWaldmann Task Light 50sx The Task Light and Halux LED Lamp for additional lighting support (Image Shown is LS1015004). The Task Light Support attaches to equipment side rails. Task Light not included.
LS1015004
Waldmann Task Light 50sx
LS1015002 Burton Lamp Mounting Holder
LS1015001 Luxo Lamp Mounting Holder
LS1015003 Waldmann Lamp Mounting Holder
LS1015002 LS1015001 LS1015003
LS1015004
Organizational Tools
47To order, call 800-548-4873Table of Contents
Utility HookThe Utility Hook attaches to equipment rails for improved organization. Optional clips are available to hold documents, manage patient leads, or additional accessories.
LS1013013
LS1013113
LS1013014
LS1013114
Single Hook
Single Hook with 3 Clips
Triple Hooks
Triple Hooks with 9 Clips
Utility BasketThe Utility Basket attaches to equipment rails and is used to organize a multitude of supplies.
LS1011001
LS1011002
LS1011008
LS1011003
LS1013001
6.5” W x 4” D x 7” H
10” W x 6” D x 4” H
10”W x 6”D x 8”H
18”W x 9”D x 4” H with
3 Adjustable Dividers
10”W x 13” H Chart Holder
Storage BasketWire Storage Basket attaches to vertical HarmonyAIR™ equipment boom column.
THOPT0291
Stainless Steel Storage BasketStainless Steel Storage Basket attaches to vertical HarmonyAIR™ equipment boom column.
THOPT9893
LS1013013
LS1011001
LS1013113 LS1013014 LS1013114
Organizational Tools
48To order, call 800-548-4873Table of Contents
Storage BinTilt out rail mounted
LS1011100
3 Bin
LS1011101 4 Bin
LS1011102 5 Bin
LS1011103 6 Bin
Computer HolderComputer Holders HarmonyAIR™ equipment booms are dimensioned for computers in different sizes. Two silicon belts guarantee individual adaptability and secure mounting for computers. Includes mounting hardware.
THCOM6144
THCOM6146
Small, 11 lbs max load
Large, 44 lbs max load
Keyboard HolderKeyboard Holder for HarmonyAIR™ equipment booms, fixed, fits standard keyboards; could also be used as a half shelf for holding fluids.
THKEY112
11 lbs max load
Laptop Holder with MousepadLaptop Holder with Mousepad for HarmonyAIR™ equipment booms.
THKEY113
22 lbs max load
LS1011100 LS1011101 LS1011102 LS1011103
THMOM6144
Organizational Tools
Keyboard Drawer with MousepadKeyboard Drawer with Mousepad (left/right) for HarmonyAIR™ equipment booms.
THKEY121
6.6 lbs max load
Keyboard and Mouse SupportKeyboard and Mouse Support for HarmonyAIR™ equipment booms.
Keyboard and Mouse Support on Single Pivot Arm for HarmonyAIR™ equipment booms.
Keyboard and Mouse Support on Double Pivot Arm for HarmonyAIR™ equipment booms.
THKEY131
15.9” Arm Length, 11 lbs max load
THKEY111 18.4” Arm Length, 11 lbs. max load
THKEY311 21.4” Arm Length
THKEY411 35.1” Arm Length
Bair Hugger PolePole for Bair Hugger with pole clamp. Mounts between two shelves.
LS1022010
25mm
Bair Hugger ShelfBair Hugger shelf, vertical rail mounting.
LS1022011
THKEY131 THKEY111THKEY111 THKEY411
To order, call 800-548-4873
M8666EN.2021-03, Rev. D ©2021 STERISAll rights reserved.
5960 Heisley RoadMentor, OH 44060-1834 • USA440-354-2600 • 800-548-4873www.steris.com