Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
CNC Lathes
» Mazak Integrex 300-IV S – 7 axis lathe, twin 10” chucks, 60” between centers
» Mazak J – 200 – 5 axis lathe, 8” chuck, tailstock, 20” between centers
» Colchester Tornado T8MSY – 6 axis lathe, 8”chuck main, 6” chuck sub, 20” between centers
» Mori Seki SL-150 – 4+1 axis lathe, 6” chuck, 1.25” spindle bore, tailstock, 16” between centers
» Okuma LC-30-1SC – 12” chuck, 30” between centers
» Okuma Cadet – 10” chuck, 16” between centers
» Daewoo Puma-250 – 10” chuck, 3” spindle bore, tailstock, 51” between centers
» Chevalier FCL-2460 fl at bed CNC lathe – 10” chuck, 60” between centers
CNC Milling Centers
» Mazak Nexus 510C – II – 4 axis milling capability, 20” x 20” x 41” travel, Renishaw Inspection System 1000psi coolant.
» Mazak J – 200 – 5 axis lathe, 8” chuck, tailstock, 20” between centers
» Mazak Nexus 510C – II – 4 axis milling capability, 20” x 20” x 41” travel, Renishaw Inspection System 1000psi coolant
» Okuma Vertical MC-4VAE– Vertical Machining Center, x 12” y 16” z 18”
» Zoller Presetter – Smile
Equipment List
EMAIL [email protected] www.advancedmachiningservices.com
PHONE 519-944-3433FAX 519-974-9620
3232 Electricity DriveWindsor, Ontario N8W 5J1 Canada
EDM Machines
» Agie Charmilles Cut 20P – wire EDM machine, 9” x 10’ x 14” travel
» Agie Charmilles Drill 11 – ‘spark drill’ machine, ¼” diameter x 12” deep hole capacity
Material Handling
» (1) KONE 5 ton overhead crane
» (6) DEMAG Jib Cranes – 2.2 ton capacity each, electric
» (1) CLARK Lift truck – 4500lb capacity
Toolroom Machinery
» (3) Series 1 Bridgeports with Accurite 2D CNC Systems
» (1) Series 1 Bridgeport, manual w/DRO
» (1) First Vertical Mill, 11” x 58” table, magnetic chuck.
» (1) Colchester Mastiff 1400 Universal Engine and Toolroom Lathe. 72” between centers, 32” gap, DRO, 12” 3-jaw chuck and 16” 4-jaw chuck
» (1) Okamoto Automatic Surface Grinder – 8” x 20” electric magnetic chuck
» (1) Powermatic Manual Surface Grinder – 6” x 12” chuck magnetic chuck
» (1) King Micro Lathe – 4” dia x 18” capacity
» (1) Forte Horizontal Bandsaw
» (1) Verti-cut Vertical Bandsaw
» (1) Sunnen Honing Machine – up to 1” diameter
» (1) Hyd-Mech: HSV-250 CNC SAW
» (1) LightWriter SPE Laser Engraver
» (1) Ranger Parts Washer High Capacity
» (1) Heat Oven – In House Heat Treating and Annealing
EMAIL [email protected] www.advancedmachiningservices.com
PHONE 519-944-3433FAX 519-974-9620
3232 Electricity DriveWindsor, Ontario N8W 5J1 Canada