Embed Size (px)
Citation preview
E Q U I P M E N T &ACCESSORIES
GUIDE
JUSTCUT TURBO U BLADE
4.5” ZECHEAVY ABRASIVE PAD
MEDIUM GRIT FINISHING PAD
4.5” x .090 Blade $35.00 ea 7” x .090 Blade $62.00 ea8” x .095 Blade $65.00 ea
DIAMOND U BLADE 10” JOINT CLEANING/PREP DIAMOND BLADE
STELLITE JOINT FILLER REMOVAL BLADE
TIGER TOOTH BLADE
NYALOX END BRUSH
NYALOX CUP BRUSH
NYALOX WHEEL
16 grit $10.00 ea24 grit $10.00 ea36 grit $10.00 ea
BLADES & BRUSHES
.25” x 5” Blade $135.00 ea
.375” x 5” Blade $165.00 ea7” Blade $52.00 ea8” Blade $55.00 ea10” Blade $115.00 ea
7” x .125 Blade $185.00 ea7” x .187 Blade $185.00 ea8” x .125 Blade $220.00 ea8” x .187 Blade $220.00 ea
4.5” Blade $35.00 ea7” Blade $62.00 ea8” Blade $65.00 ea
2.5 Cup $10.00 ea.75” Brush $8.00 ea
Blue (course) $11.50 eaOrange (extra course) $29.50 ea
3” Cup $10.00 ea4” Cup $10.00 ea
Distributed By
8” Scraper $75.00Scraper Blades $30.00 (pack of 10)
TELESCOPING FLOOR RAZOR SCRAPER
ALBION 250ML SINGLE CARTRIDGE GUNFOR USE WITH RAPID REFLOOR 250 ML CARTRIDGES
250 ML Gun $25.00
NEWBORN MODEL 435XSP CARTRIDGE GUN
FOR USE WITH SPAL-PRO 2000 450 ML CARTRIDGES
450 ML Gun $71.50
ALBION T1500 DUAL CARTRIDGE GUNFOR USE WITH SPAL-PRO RSF OR
RAPID REFLOOR PIT GROUT 1500 ML CARTRIDGES
1500 ML Gun $110.00
NEWBORN #632 BULK CAULKING GUNFOR HAND APPLYING MM-80
Gun $85.00
ALBION T900 DUAL CARTRIDGE GUNFOR USE WITH SPAL-PRO 2000 900 ML CARTRIDGES
900 ML Gun $82.50
ALBION T600 DUAL CARTRIDGE GUNFOR USE WITH SPAL-PRO RS88,
EDGE-PRO 80, RAPID REFLOOR, & RS65 600 ML CARTRIDGES
600 ML Gun $71.50
CARTRIDGE GUNS
Distributed By
STATIC MIXER FOR RAPID REFLOOR 250 ML
$2.75
STATIC MIXER FOR RAPID REFLOOR 600 ML
$2.75
STATIC MIXER FOR RS-88 & RS-65 600 ML
$2.75
STATIC MIXER FOR SPAL-PRO 2000 450 ML
$2.75
STATIC MIXER FOR DUAL-COMPONENT PUMPS OR 1500 ML
CARTRIDGES$2.75
STATIC MIXER FOR SPAL-PRO 2000 900 ML
$2.75
STATIC MIXER FOR EDGE-PRO 80 600 ML
$2.75
STAT IC MIXERS & LOCK NUTS
LOCK NUT CLEAR$1.00
LOCK NUT ALUMINUM$12.95
LOCK NUT SQUARE$1.00
ALUMINUM NIGHT CAP$22.95
LOCK NUT BLACK$1.00
Cartridge/Mixer Matches
RAPID REFLOOR 250 MLStatic mixer:
1/4” x 32 element static mixerFlow Restrictor Cap
EDGE-PRO 80 600 ML & EDGE-PRO 90 600 MLStatic mixer:
3/8” x 24 element static mixer
SPAL-PRO RS-65 600 ML & SPAL-PRO RS-88 600 MLStatic mixer:
3/8” x 32 element static mixer
RAPID REFLOOR 600 MLStatic mixer:
10.7 mm x 24 element square static mixerFlow Restrictor Cap
for Metzger/McGuire Products
PIT GROUT 1500 ML, SPAL-PRO STABLIZER EXP 1500 ML & SPAL-PRO RSF 1500 MLStatic mixer:
1/2” x 30 or 32 element static mixer
SPAL-PRO 2000 450 MLStatic mixer:
8.7 mm x 24 element static mixer
SPAL-PRO 2000 900 MLStatic mixer:
1/2” x 24 element static mixer
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
Portable, Reliable, Rugged Design Easy to Operate & Maintain Stainless Steel Construction Changeable Ratios 9 Gallon Stainless Steel Tanks ½ HP DC Drive Motor Automatic or Manual Dispense Valve Electric/pneumatic Powered
Backed by AST Warranty Pumps Non-Abrasive Materials Fixed Ratios of 1:1 to 4:1 Continuous Flow Up to 0.5 GPM Fluid Pressures Up to 750 PSI Viscosities Up to 5,000 CPS Variable Flow Rate Uses AST GMP Metering Pumps
Adhesive Systems Technology ▪ 9000 Science Center Drive, New Hope, MN 55428 Phone: 763-592-2060 ▪ Fax: 763-592-2075 ▪ www.ast-corp.net ▪ [email protected]
METER-MIX DISPENSE EQUIPMENT
METERING & DISPENSING EQUIPMENT FOR THE PROFESSIONAL CONTRACTOR
Joint Filling
Concrete Restoration
Small Joint Sealing
Small Spall Repair
Anchoring
Spray
ONE MAN POLYMER PUMPHigh volume electric pump for dual component installation.
• The New Design of this joint fill pump allows for one person operation
• The unit comes standard with a 1:1 component ratio, but a 2:1 component ratio is available
• Lower tanks makes filling easier • Dedicated storage area for generator or battery • Waste bucket holder for less drips on the floor• Enclosed box for tools storage
Distributed by
MSRP$7250.00
MSRP$9425.00
POWER TORQUE BLADEØ CUTTINGWIDTH CUTTINGDEPTH WEIGHT
2.400W 7.800rpm 6" upto2" upto1.8" 14.3lbs
ADVANTAGES
Safe,withauniqueandpo-werfuloverloadelectronic
Electroniccontrol topre-ventoverload,thereforenowaitingtimeuntilthemotorcanrestart
Lowoperatingcostthroughanelectronicandamechanicalclutch
ElectronicsforasmoothstartandanLEDlightforoptimalcuttingefficiency
Dust-freemillingwithexcellentdustsuctiondevice,11/2"diameter
Floor channel cutting systemBDN 511dry
Diamondchannelcutterwith11diamondcuttingbladesforbridgelessmillingupto2"wideand1.8"deep
2.400WattpowerandbestrotationspeedforextensivemillinginthehardestofmaterialswithouteffortAllcuttingdepthspossibleinonestepwith11diamondcuttingbladesApplicablewiththetracksystemBRS512,BRS513,BRS514andthefloorchannelcuttingsystemBDN511
DiamondfloorchannelcutterBDN511with11diamondcuttingbladesGOLDIIwithcarryingcaseandacc. 6926 DiamondfloorchannelcutterBDN511with11diamondcuttingbladesGOLDIIwithcarriage+carryingcase 7375 SpecialhooktotightenorloosentheBAIERdiamondblades 11239 CarriageforBDN511 7336 DiamondcuttingbladeGOLDII,diameter6"x1.2"forreinforcedconcrete,highlycompressed 75333 limestone,brickandporoton
BDN511 ID#
Floor channel cutting system
Diamondcuttingblade
Metzger/McGuire-POBox2217-Concord,NH03302800-223-6680-www.metzgermcguire.com
BDN 511Floor channel cutting system
dry
Safe, with a unique and powerful overload electronic
Electronic control to prevent overload, therefore no waiting time until the motor can restart
Low operating cost through an electronic and a mechanical clutch
Electronics for a smooth start and an LED light for optimal cutting efficiency
Dust-free milling with excellent dust suction device, 1 1/2” diameter
Diamond floor channel cutter with 11 diamond cutting blades for bridgeless milling
up to 2” wide and 1.8” deep2.400 Watt power and best rotation speed for extensive milling in the hardest of materials without effort
All cutting depths possible in one step with 11 diamond cutting blades
800-223-6680 www.metzgermcguire.com
Diamond cutting blade
MSRP$3800.00
MSRP$395.00
MSRP$2100.00
MSRP$2695.00
MSRP$4195.00
MSRP$1595.00
MSRP$4695.00
MSRP$2695.00
AG0621
Scott MetzgerConcord, NHTel: 603.731.8393E-Mail: [email protected]
Pat SmithConcord, NHTel: 603.568.1595E-Mail: [email protected]
Nationwide:
P.O. Box 2217Concord, NH 03302
Fax: 603.224.6020Email: info@metzgermcguire
800-223-6680www.metzgermcguire.com
Industry standard IndustrIal Floor JoInt FIllers and repaIr productsIndustry standard IndustrIal Floor JoInt FIllers and repaIr products
TECHNICAL SUPPORT TEAM
USTM0420
Matt RizzoMedford, OR Tel: 541.301.3943E-Mail: [email protected]
Jeromy CraigPortland ORTel: 503-703-9686E-Mail: [email protected]
Dick RischSt. Peters, MOTel: 314.651.8301E-Mail: [email protected]
Dave SharamitaroHilliard, OH Tel: 614-440-0599E-Mail: [email protected]
Jim Marchillo Concord, NHTel: 603.496.5512E-Mail: [email protected]
Lance DrabczykRolla, MO 65401Tel: 573.308.0643E-Mail: [email protected]
Mike TuccelliClayton, NCTel: 919-909-8280E-Mail: [email protected]
