Alluvius EP Damp Mate FC is a legitimate contender for the most diverse epoxy primer available in the market today. Solvent free EP Damp Mate FC delivers repeatable results under diverse and adverse conditions while showcasing resistance to osmotic blistering, compatibility to damp and high alkaline concrete, corrosion resistance, and fast curing with a workable gel time. EP Damp Mate FC’s exceptional adhesion to less than ideal substrates under broad climatic conditions makes it Alluvius' most popular specialised epoxy primer.

EP Damp Mate FC

Alluvius EP Damp Mate FLX can eliminate the need to patch and fill hairline cracks prior to application of subsequent coatings when used as a primer for the broadcast of graded quartz prior to application of subsequent coatings. EP Damp Mate FLX also offers the fast curing properties and resistance to osmotic blistering of its companion epoxy resin EP Damp Mate FC but with a marginally longer open and cure through time. EP Damp Mate FLX Resin (Part A) is used in place of EP Damp Mate FC Resin (Part A) with EP Damp Mate Universal Hardener (Part B) when increased flexibility is required or a slightly longer working time is preferred.

EP Damp Mate FLX

www.alluvius.com.au

info@alluvius.com.au

1300 886 945

Alluvius specialised premium quality epoxy primers deliver an extensive range of properties for various applications and indus-tries. Combinations of mechanical properties for diverse applica-tions with exceptional adhesion to less than ideal surfaces under adverse conditions allows installers of Alluvius polymer systems the ideal solution to meet and exceed project requirements in a prompt fashion even under less than favourable conditions.

Alluvius SpecialisedEpoxy Primers

Alluvius products are not only solvent-free (VOC free), they’ve also been carefully formulated where possible with renewable bio-based materials. Please contact your Alluvius sales rep for specific bio contents

VOC Free withBio-Based Technology

A waterbased vapour permeable epoxy primer that can be placed over two-week old concrete and polymer concrete toppings as an easy to apply coating for novice applicators. WEP VP is more than a thousand times permeable to rising vapours than standard solvent based and solvent free epoxycoatings making it a preferential choice for slab on grade priming where the likelihood of osmotic blistering is high and a transparent thin film appearance is favoured.

WEP VP

Direct to metal epoxy primer that can be applied over lightly prepared steel. EP DTM technology has been successfully used for tank liners and industrial marine applications across the globe for a number of decades. Alluvius EP DTM takes this proven technology forward with modern revisionsfor improved corrosion inhibiting properties.

EP DTMIndustrial floors and mechanic workshops, as well as residen-tial garage floors, are notoriously difficult to coat when they’ve been exposed to petroleum and petroleum by-products. Adhesion failure, fish eyes, and widespread rejection are far too often experienced when coating these highly contaminat-ed substrates. Alluvius EP Oil Resist exhibits a tenacious bond to these demanding environments allowing the installer a significantly improved chance of success on the first coat under these unforgiving conditions.

EP Oil Resist

A Class 1 vapour retarder for concrete substrates that receive nonpermeable coatings and linings. When Alluvius EP E96 is installed at the specified film thickness, moisture can be suppressed below 0.1 perms with accordance to ASTM E96, a standard test method for water vapour transmission of materials.

EP E96