Upload
yokogawa-europe
View
28
Download
1
Embed Size (px)
DESCRIPTION
Drive your Energy Management Effectively and Sustainably. With EP-Analytics you can transfer data into useful information for operator, engineer and management for decision making and assist to find the cause of energy wastes by drilldown function. EP-Analytics uses Production Supervisor of Yokogawa standard dashboard.
Citation preview
Bulletin 43G01C20-01EN
www.yokogawa.com
Solution Implementation Services®
Drive your Energy Management Effectively and Sustainably
Key features
Assists ISO50001 International Standard based Energy Management
• Assist ISO50001 based energy management
• Perform accurate energy calculation by Visual MESA EP-Analytics model
• Provides suitable Dashboard for each user
• Detects abnormality and notifies users with alarms and emails
• Assist resolving abnormalities quickly by providing drill down capabilities
As a calculation engine, EP-Analytics adopts
Soteica Visual MESA’s rigorous energy calculation
software based on the Visual MESA simulation
engine. Since EP-Analytics calculation model has
the common base with Visual MESA EM-RTO(Real
Time Optimization) , EP-Analytics can be upgraded
to Visual MESA EM-RTO.
Energy management System (EnMS)
Quote from Figure-1 of ISO50001:2011E
ISO50001 International Standard specifies energy
management system (EnMS) requirements. Based on
ISO50001, an organization can develop and
implement an energy policy and establish objectives,
targets and action plans. The key points is to drive
both management PDCA and operational PDCA. EP-
Analytics has functionality to assist ISO based Energy
Management. BSI*1 assessed the EP-Analytics software scope and functionality with regard to key requirements of ISO50001:2011E Standard. BSI confirms that it is fairly represented in the report*2 that users of Yokogawa’s software can reliably visualize the data produced by the software to support the conformity with ISO50001:2011E.
Energy Performance Analytics
EP-Analytics
Expandable Solution from Visualization to Optimization
*1 British Standards Institution *2 Functionality of EP-Analytics to assist users in operating and managing
the ISO50001 Energy Management System (ADV-SOL-14-103 Rev.3)
Energy Performance Analytics
EP-Analytics
Energy Dashboard
Visual MESA EP-Analytics Model
Alarming
Drill down
Energy Dashboard shows energy data in various form of Web parts such as
various type of charts, gauge, table and graphical image. EP-Analytics provides
suitable Energy Dashboard for several types of users to meet their energy
management purpose.
EP-Analytics is powered by a model based calculation engine which is Soteica
rigorous energy calculation software based on the Visual MESA™. It calculates
EnPIs(Energy Performance Indicators), mass balances and other energy related
data, and has capabilities of Data Validation, Energy Balance and Mass Balance.
Sensor data is validated by comparing data with the maximum and minimum limits.
Energy balance is calculated based on the energy consumption within
boundaries such as each plant or equipment. Mass balance is calculated
based on balance error of energy source such as steam, electricity and fuel.
When an EnPI value exceeds the limit, an e-mail is sent to notify the alarm.
Conditions of alarm limit are High, HH(HighHigh), Low, LL(LowLow) and
deviation from a target value. Alarms are logged to internal database and
can be shown on a screen by alarm list.
Drill down is used to pursue the abnormality when alarm comes out. By
clicking a bar or a line in column or line chart, a lower layer chart linked to
the bar is displayed. By clicking a hot spot or a value label in graphical
screen, a lower layer graphical screen is displayed
YOKOGAWA ELECTRIC INTERNATIONAL Pre Ltd 5 Bedok South Road, Singapore 469270, Singapore
Tel:65-6241-3700 Fax:65-6241-9919
URL: http://www.yokogawa.com/sg/
YOKOGAWA ELECTRIC CORPORATION World Headquaters
9-32, Nakacho 2-chome, Musashino-shi, Tokyo 180-8750, Japan
Tel: 81-422-52-8824 Fax: 81-422-52-7048
URL: http://www.yokogawa.com/