EOS 3000 Specification

7/28/2019 EOS 3000 Specification

1/4

EOS 3000 specification

Type: 35mm autofocus, autoexposure single-lens reflex with focal-plane shutter, built-in flash and built-in motor drivePicture size: 24 x 36 mmLens mount: Canon EF mountViewfinder:

Eye-level pentaprism (non-interchangeable)

Picture coverage: 90 percent vertically and horizontally

Magnification: 0.70x (with 50mm lens at infinity)

Standard dioptre: -1 dioptre (18.5mm eye relief)

Fixed focusing screen (New Laser-matte marked with focus points and partial

metering circle)

Viewfinder information includes shutter speed, aperture, AE Lock, Red-eye

reduction indicator, flash ready signal, exposure compensation scale, in-focus

indicator (viewfinder display cannot be switched off)Mirror: Quick-return half mirror (transmission: reflection ratio of40:60); viewfinder blackout time of 360ms or shorter at 1/60 secondand faster speeds.Mirror vignetting: no vignetting up to EF 200mm f5.6 (or EF 80-200mm f4.5-5.6 at 200mm), except for the EF 50mm f1.0L lens.Depth-of-field preview: not providedEyepiece shutter: not built-in (accessory eyepiece cover is attachedto camera strap)Exposure metering: TTL maximum aperture metering with a 6-zonesilicon photocell. There are two metering modes:

Evaluative metering Partial metering (approx. 9.5% of viewfinder at centre)

Partial metering is set in the Program Image Control (PIC) modes (except A-

DEP) and during AE Lock.

Metering is activated when the shutter button is partially depressed, and

continues for 6 seconds after the shutter button is released.

Incorrect exposure is indicated by a 'blinking' display on the external LCD and

in the viewfinder.

Shooting modes: Intelligent Program AE (shiftable)

Shutter speed-priority AE

Aperture-priority AE

Full Auto

Program Image Control (Portrait, Landscape, Close-up. Sports)

Auto DEP

TTL program flash AE

A-TTL program flash AE

Metered Manual

E-TTL autoflash is not available


2/4

Metering Range: EV 2-20 (at 20C/68F with 50mm f1.4 lens, ISO100)ISO film speed range:

ISO 25 to5000 (set automatically with DX-coded film at ISO 25-5000)

ISO 6 to 6400 (set manually in 1/3 stop increments)

Exposure compensation: set manually up to +/- 2 stops in 0.5 stopincrements (only available in Creative Zone modes. AEB is notprovided.AE Lock: enabled with the AE Lock button (camera automaticallyswitches to partial metering mode). Settable only in Creative Zonemodes. AF Lock sets AE Lock automatically.Multiple exposures: Maximum 9 multiple exposures. Cancelsautomatically after all multiple exposures are taken. (Cancellable andresettable at any time.) Settable only in Creative Zone modes.Autofocus:TTL-SIR (through-the-lens secondary image registration).Three focus points.AF working range: EV 1.5-18 (at ISO 100)Focusing modes: one of the following two modes is setautomatically (not user-selectable) to suit the picture-taking mode.

One-Shot AF: autofocus stops when focus is achieved; AF lock enabled; shutter

releases only when focus is achieved

AI Servo AF (switches automatically between One-shot AF and Predictive AF).

For still subjects: when focus is achieved, AF operation stops and focus is

locked. For moving subjects: AF continuously tracks subject movement.

Manual focusing: enabled with the focusing ring when the lens focus mode

switch is set to MF (or M). The three focus points serve as a focusing aid.

In-focus indicator: lights in viewfinder and beeps (beeper can bedisabled in Creative Zone modes).Focusing point selection: automatic by camera (not userselectable, except that use of partial metering selects centre focuspoint).AF-assist beam: built-in tungsten lamp; lights automatically whenrequired (EV 3 to 5 at ISO 100 or slower). Range: 4 metres at centreand 2.5 metres at sides.Shutter:Vertical-travel, focal-plane shutter with all speedselectronically-controlled

Shutter speeds: 30 seconds to 1/2000 second in 1/2-stops; X-syncat 1/90 second; bulbShutter release: soft-touch electromagnetic release. 2.5mm mini-jack terminal provided for Remote Switch RS-60E3Self-timer: electronically-controlled with 10 second or 2 seconddelay; operation indicated by electronic beeper (at 2Hz, then at 8Hzfor the final two seconds); self-timer countdown on LCD panel;useable in all shooting modes; self-timer cancellable by turningCommand Dial to LCamera shake warning: provided for Full Auto and Program ImageControl modes (if the shutter speed is slower than the reciprocal ofthe lens focal length by 0.5 steps or more, the shutter speed displayblinks)


3/4

Film loading: prewind system; automatic take-up with sprocketedspool. Prewind time: 9 seconds for 24-exposures.Film advance system: automatic film advance with built-in motor.Film advance at approx. 1fps.Film advance modes: single or continuous film advance set

automatically to suit the picture-taking modeFilm rewind system: film is rewound into cassette as film advancesfrom frame to frame.Midroll rewind: providedFrame counter: electronic numeric counter on external LCD; countsup during prewinding and counts down during film advance or midrollrewind.Built-in flash: retractable TTL autoflash head in pentaprism. Manualpop-up and retraction (in PIC modes, a flash required warning blinksin viewfinder display)Flash exposure system:TTL off-the-film, 3-zone, autoflashmetering linked to focusing points.Flash activation:

in Creative Zone modes, flash fires every time when popped up.

in Full Auto and PIC modes, flash only fires in low-light and back-lit situations

when popped up

Guide number: 12 (ISO 100, metres)Effective range: up to 4.2 metres with ISO 100 negative film.Flash output control: automatic flash output reduction forbacklighting and fill-in flash.

Flash exposure compensation: not providedCorrect flash exposure indicator: not providedFlash duration: 1 ms or lessRecycling time: approx. 2 secondsCoverage: down to focal lengths of 28mmSynchronisation speed:

automatically set to 1/90 second in Program AE mode

can be set between 30 seconds and 1/90 second in Tv and Manual modes

automatically set between 30 seconds and 1/90 second in Av mode.

Red-eye reduction: selectable. Tungsten lamp (also serves as AF-

assist lamp) lights for approx. 1.25 seconds. Operates in all picture-taking modes.External flash unit compatibility: attaching an external Speedlitevia hot-shoe disables the built-in flash, giving priority to the Speedlite.No PC socket. All Speedlites can be used, but E-TTL flash is notavailable.Custom Functions: noneLCD panel: display includes shutter speed, aperture, frame counter,film speed, exposure scale and battery check, together with red-eyereduction lamp, self-timer, film status, beeper and multiple exposure

icons


4/4

Remote control: 2.5mm mini-jack socket accepts Remote Switch RS-60E3Interchangeable grip: none (Battery Pack BP-8 attachable)Power source:

two CR123A lithium batteries housed in the camera grip;

with Battery Pack BP-8, 4 size-AA alkaline batteries

Battery check: four-stage battery level indicated on external LCDwhen camera is swtched onCamera back: non-interchangeableDimensions: 145 (W) x 92 (H) x 61.9 (D) mmWeight: 350g (excluding battery)Compatible accessories include:

Semi-hard case EH8-L/LL

Wide strap EW-100

Battery Pack BP-8

Tripod Grip GR-80TP

EF lenses

EZ, EG and E-series Speedlites

EX-series Speedlites (with TTL-flash only)

Macro Ring Lite ML-3

Remote Switch RS-60E3

Eyecup Eb

Dioptric Correction lenses E

Angle Finder B

Eyepiece Extender EP-EX15

Subject to change without notice. All the data is based on Canon'sStandard Test

Documents

EOS 3000 Specification