Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
All DSE Control Modules are tested to ensure compliance to the latest Environmental Testing Standards. DSE is committed to producing quality products that will withstand the toughest environments across the globe.All DSE products meet the requirements of the environmental standards outlined below.
Full certification for all DSE products is available upon request.
ENVIRONMENTALTESTINGSTANDARDS
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
Registered in England & Wales No.01319649VAT No.316923457
055-052-02-17 (7)
ELECTRO-MAGNETICCOMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standardfor the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standardfor the Industrial Environment
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5Hz to 8Hz @ +/-7.5mm,8Hz to 500Hz @ 2gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55ºC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40ºC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes 15gn in 11mS
ELECTRICAL SAFETYBS EN 60950Safety of Information TechnologyEquipment, including ElectricalBusiness Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30ºCBS EN 60068-2-2Bb/Be Dry Heat +70ºC
ISO 9001Registered
QualityManagement 015