1
ChemLink Laboratories • 3960 Royal Drive; NW Kennesaw, GA 30144 • 770-499-8008 • 678-594-4485 • Fax 678-265-1164 • http://www.chemlinklabs.com C C rete Sweep is a dry, waterless concrete cleaning powder. The primary use is to clean and cover up unsightly stains on porous concrete. The powder is composed of minerals to help match the color of unstained concrete. Bio-stimulates are added to enhance the degradation of embedded oils. CRETE SWEEP is not an absorbent, absorb spills prior to application of CRETE SWEEP. Apply CRETE SWEEP to dry concrete stain with wind at your back. Wear safety glasses with eye shields Before After Crete Sweep Crete Sweep WATERLESS CONCRETE CLEANER WATERLESS CONCRETE CLEANER or safety goggles. Work 100% of product into concrete with a fine bristled broom. There is no need to over apply; a little product goes a long way! One shaker container will cover up to 200 sq. ft. of area. Re-apply CRETE SWEEP periodically depending upon traffic and oil leakage of vehicles. CRETE SWEEP will continue to work long after it has been applied. The active ingredients will continue to break down the oil in the concrete. New “WET” CRETE SWEEP application. Using a heavy duty pump sprayer add 1 cup of CRETE SWEEP per gallon of water. Agitate container to make sure CRETE SWEEP is mixed with water. Pressurize pump sprayer and spray evenly over stained areas. This is a great way to apply CRETE SWEEP on windy days. SDS available upon request.

Enviro Broom Crete Sweep - chemlinklabs.comchemlinklabs.com/wp-content/uploads/2015/12/Crete-Sweep.pdf · Crete Sweep WATERLESS CONCRETE CLEANER or safety goggles. Work 100% of product

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

  • ChemLink Laboratories • 3960 Royal Drive; NW Kennesaw, GA 30144• 770-499-8008 • 678-594-4485 • Fax 678-265-1164 • http://www.chemlinklabs.com

    ChemLink Laboratories • 3960 Royal Drive; NW Kennesaw, GA 30144• 770-499-8008 • 678-594-4485 • Fax 678-265-1164 • http://www.chemlinklabs.com

    EEnviro Broom is a revolutionaryabsorbent that starts soaking up spillsas soon as it touches liquid. Keepingyour parking lot, fuel islands andsidewalks free of unsightly spills is abreeze with ENVIRO BROOM!

    ENVIRO BROOM is a patentedformula comprised of recycledmaterial that exhibits a superiorwicking action on spills.

    ENVIRO BROOM’s mode of action isto IMMEDIATELY encapsulate thespill on contact. ENVIRO BROOMabsorbs the spill right to its core.MSDS available upon request.

    CC rete Sweep is a dry, waterlessconcrete cleaning powder. The primaryuse is to clean and cover up unsightlystains on porous concrete.The powder is composed of mineralsto help match the color of unstainedconcrete. Bio-stimulates are added toenhance the degradation ofembedded oils.

    CRETE SWEEP is not an absorbent,absorb spills prior to application ofCRETE SWEEP.Apply CRETE SWEEP to dryconcrete stain with wind at your back.Wear safety glasses with eye shields

    AAPPPPLLIICCAATTIIOONN::Step 1: Apply ENVIRO BROOM on one sideof the spill.

    Step 2: Using a stiff bristled push broom, startfrom one side of the spill and work ENVIROBROOM into spill with a firm circular motion.If ENVIRO BROOM is gummy after use or spillis not fully absorbed, apply more ENVIROBROOM and repeat step 2.

    Step 3: After the surface is dry, use a broomand dust pan to remove the ENVIRO BROOMand dispose. Always follow local, state andfederal laws for disposal.

    Step 4: After sweeping up all residue, coverarea with CRETE SWEEP to finish.

    1 2

    3 4

    Before

    After

    Enviro BroomEnviro BroomA B S O R B E N T A B S O R B E N T

    Crete SweepCrete SweepWATERLESS CONCRETE CLEANERWATERLESS CONCRETE CLEANER

    or safety goggles. Work 100% of product intoconcrete with a fine bristled broom. There isno need to over apply; a little product goes along way! One shaker container will cover upto 200 sq. ft. of area. Re-apply CRETESWEEP periodically depending upon trafficand oil leakage of vehicles.CRETE SWEEP will continue to work longafter it has been applied. The activeingredients will continue to break down the oilin the concrete.

    New “WET” CRETE SWEEP application.Using a heavy duty pump sprayer add 1 cupof CRETE SWEEP per gallon of water. Agitate container to make sure CRETESWEEP is mixed with water. Pressurize pumpsprayer and spray evenly over stained areas.This is a great way to apply CRETE SWEEPon windy days.SDS available upon request.