Entrance Security Catalogue · switch secured in the lockable cabinet. Bright LED Indicators Eye-level green and red status lights, and zone indicators are highly visible, even in

Entrance Security [email protected]

Valley Associates Global Security Corporation 2108 Old Montreal Rd. | Cumberland, ON K4C 1G8

ph 613.830.1880 | t/f 877.226.2219 | fax 613.830.3008www.valleyassociates.com

Mass Trauma Medical KitsChinook Life Station

The LIFE™ Station includes �ve individual vacuum-sealed LIFE™ Kits and one casualty extraction litter housed in the LIFE™ Pack. The LIFE™ Kits are easily accessed through the unique dispensing system on the front of the LIFE™ Pack; simply open the LIFE™ Station door and pull out one, two or more LIFE™ Kits, or grab the entire LIFE™ Pack out of the Station for a mobile kit.

The LIFE™ Station container is a surface-mounted storage cabinet that has the ability to be recessed into a wall to be located in publicly accessi-ble areas, much like AEDs inside schools, o�ces, and other buildings. The LIFE™ Station is similar to traditional AED cabinets, but speci�-cally designed to house our LIFE™ Pack. The LIFE™ Station also incorpo-rates a security staple for tamper-evi-dent tag attachment.

The Chinook LIFE™ Station contains the fully kitted LIFE™ Pack, providing public access to critical lifesaving medical supplies during public health emergencies. The LIFE™ Station is 9 inches deep and can be mounted to a wall or recessed using the optional �ange. When recessed, a Chinook LIFE Station meets ADA standards.



XR3D-60600 CLASS

PRODUCT HIGHLIGHTS

•

• Icon-driven GUI with LCD touch screen

•

•

• One-touch, Instant View Last Five Bags

• Dynamic Pseudo Density Layering

•

• Auto archiving

• Network-Ready

POWERFUL 3-D PERSPECTIVE TECHNOLOGY

The XR3D-60 is an easy to operate, single source scanner that provides

With a tunnel opening of 24.2” wide by 16.7” high (615 mm x 425 mm),

parcels and bags is required.

operators can manipulate and enhance scanned images in a variety of ways



Superior versatilityMenu based settings for feature selection such as alarm indication, count method, and language without the use of a computer. Field programmable to allow system upgrades. Multiple units can be installed as close as 2 inches.

Advanced broadband technologyAnalyzes targets across a broad range of frequencies for greater accuracy. Provides superior ferrous and non-ferrous detection. Improved discrimination means fewer false alarms and higher throughput.

More accurate pinpointing With more than four times the detection coils

of competitive models, the PD 6500i provides uniform detection and precise pinpointing. Independent zone indicator lights on both side panels identify not only height but also left, center and right locations for one or more objects passing through the archway.

Dual-sided detection This unique bilateral technology has

transmitters and receivers in each side panel to allow scanning from both sides, resulting in uniform detection throughout the archway. It also provides superior noise cancellation resulting in easier setup (i.e. no need to rotate the unit to avoid interference from nearby equipment such as other metal detectors or x-ray machines).

z

PD 6500i™

Garrett PD 6500i ® Enhanced Pinpoint Walk-Through Metal Detector



Intuitive Menu Design 32-character menu prompts are easy to understand (i.e. no confusing codes or acronyms to memorize).

Unique Slider Bar Use to quickly adjust the value of a setting.

Enhanced Access Control Tamper-free detector controls via a 5-digit alpha/numeric system that has 60 million code combos. Additional security measures include a programmable keypad restriction switch secured in the lockable cabinet.

Bright LED Indicators Eye-level green and red status lights, and zone indicators are highly visible, even in direct sunlight.

Auto-Scan Function The MZ 6100 scans electromagnetic environment and selects optimal frequency for noise cancellation.

Superior Versatility Field programmable to allow system upgrades. Environmentally protected against wind, rain and dust. Full array of accessory items such as IR remote control (for easy adjustments) and caster sets (to make unit fully portable).

MZ 6100™

Garrett MZ 6100™Multi-Zone Walk-Through Metal Detector



Garrett SUPER SCANNER VHand Held Metal Detector

™

Ultimate sensitivity: detects medium sized pistol from 9" distance; large knife from 6"; razor blades and box cutters from 3" distance; foil-wrapped drugs and tiny jewelry from 1".

Self-calibrating: digital microprocessor technology eliminates the need for periodic sensitivity adjust-ments.

Rugged, high-impact ABS case with reinforced coil compartment. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II and IV.

Large 8" scan surface for quick, thorough scanning.

No tools required to change standard 9V battery (included). Optional rechargeable battery kit available.

Sharp audible alarm and bright red LED indicates the detection of metal.

Momentary push button helps temporarily eliminate detection of nearby ambient metal such as rebar, metal walls.

Three-color LED indication: Green LED indicates ON; Amber LED indicates LOW BATTERY: Red LED indicates ALARM.

Operating temperatures: -35° F (-37° C) to 158° F (70° C)

Originally designed for use at the Olympic Games in 1984, Garrett's Super Scanner is the most recognized hand-held metal detector in the world. Super Scanner V has both audible and silent vibrating alarm options and extended battery life.

Key Features:



Garrett THDTactical Hand Held Metal Detector

™

Ultra sensitive response to metal objects.

Accurate detection of all ferrous, non-ferrous and stainless steel weapons, contraband and other metallic objects.

Powerful 4-inch length, 360º detection area.

Does not require adjustments.

Silent vibrating with Red LED alarm indicator.

Bright LED �ashlight for low light and night operations. Useful for scanning IDs and for searching pockets, handbags.

Sealed water-resistant construction. Meets IEC 529 IP66 standards

High impact case with molded rubber grip. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II.

9V battery operation (Included).

Ballistic weave holster (included)

The THD is the most rugged, compact metal detector on the market. With a highly-sensitive 360° detection area and a silent vibrating alarm indicator, the THD is the perfect metal detector for all law enforcement operations. It is also particularly e�ective for use in schools, bars and clubs, and for corporate security.

Key Features:



Fever SpotterThermal Fever Detection System

The NVTS Fever Spotter is designed for mass fever screening in crowded public places. Screening for fever may contain or

normal body temperatures.

Fever Spotter combines advanced thermography technology, human body temperature measurement algorithms and

Fever Spotter is equipped with multi-subject tracking and high-temperature shielding used to avoid interference from hot beverages and electronics. When Fever Spotter detects high temp individuals, it activates an automatic warning,

FEATURES:• Continuous Video Recording• Synchronous Thermal/Visible Display• Accurate Single-Point & Multi-Point High

Temperature Auto Tracking and Alarm• Black Body, Real-Time Temperature Calibration• Scan Hundreds of People/Minute• User-Friendly Analytic Software• Hot-Spot Tracking



away.

scanning system designed for mass fever screening in crowded public places. Fever Scanner is a non-contact camera system which enables the operator to scan individuals from 2-8 meters

Our HD visible and thermal cameras make it easy to detect and identify individuals with higher than normal temperatures.

Screening for fever may contain or limit the spread of COVID-19

Fever Scanner combines advanced thermal, visible camera

technology and human body temperature measurement

algorithms to provide high resolution accuracy up to 8 meters away. Fever Scanner is equipped with high temperature alarms,

auto time and temperature triggering. It supports automatic

warning, photo taking and recording for up to 32 GB SD card

storage. An external video output is provided for large screen

-

station monitoring. Features:

• Rugged Weatherproof Housing

• 2-8 meter Human Detection Range

• HD Visible Camera & Thermal Camera Fusion

• Touch Screen Display

• Accurate Single-Point & Multi-Point High Temp Alarms

• Black Body Option for Real-Time Temperature Calibration

• Intelligent Recognition & Detection Function

• Tripod Mount Adapter

• Built-in Analytic Software

• 8G-32G Supported Internal Micro SD Card Storage

Fever Scanner Portable Fever Detection System



DY-980Y Thermal ImagerThe DY-980Y Infrared Thermal imager is designed specifcally as a budget friendly option for detecting raised body temperature. This allows an un-obtrusive way to detect cases of fever in a high tra�c, or large area, as well as to limit exposure to the security personnel.



Reusable MasksCanadian made, our reusable masks are fabricat-ed out of high quality, dual layered 100% cotton fabric, allowing easy breathability and superior comfort. The masks have static ear looks, an adjustable sti�ener on the bridge of the nose, and we are able to customise colours upon request. Both machine washeable, and reusable, sizes Small, Medium, Large, Extra Large are avail-able.

Bendable nose bridge for snug �t, sewn into fabric

Dual Layered Fabric, both layers 100% Cotton for

extra comfort Strechable Fabric Band

for relaxed �t



iEvac provides smoke protection (carbon monoxide, smoke, hydrogen cyanide, chlorine, ammonia, sulfur dioxide, hydrogen chloride) for up to 30 minutes. The �re hood, which protects against radiant heat, is light weight, easy to use. Use to escape �res in homes, o�ces, high-rises, wildland and other �re causing disasters. The iEvac Fire Escape Hood has a 4 year shelf life.

SMOKE/FIRE HOOD

®

TESTED BY

US Army Research, Development & Engineering CommandEdgewood Chemical Biological Center

Gas and Particulate Tests : Tested and Certi�ed to American Standard ASTM E2952

Challenge Symbol Type Concentration (ppm) Requirement Result

Carbon monoxide CO Hazardous combustion by-product 3,000 15 mins > 45 mins


Hydrogen cyanide HCN Hazardous combustion by-product 400 15 mins > 90 mins

Hydrogen chloride HCl Acid gas toxic industrial chemical 1,000 15 mins > 70 mins

Sulfur dioxide SO2 Acid gas toxic industrial chemical 100 15 mins > 70 mins

Cyclohexane C6H12 Organic vapor toxic industrial chemical 500 15 mins > 41 mins

Acrolein C3H4O Organic vapor toxic industrial chemical 100 15 mins > 65 mins

Dioctyl phthalate DOP Particulate aerosol 0.185 micron 200 mg/m3 >95% > 99.996%

Additional Gas and Particulate TestsChallenge Symbol Type Concentration (ppm) Requirement Result


Dioctyl phthalate DOP HEPA �ltration test for particulates and aerosols 200 mg/m3 > 99.97% > 99.996%

Ammonia NH3 Toxic industrial gas 1,250 15 mins > 60 mins

Formaldehyde HCHO Toxic industrial gas 250 15 mins > 60 mins

Phosgene COCl2 Toxic industrial gas 125 15 mins > 60 mins

Phosphine PH3 Toxic industrial gas 150 15 mins > 60 mins

Chlorine Cl2 Toxic industrial gas 200 15 mins > 60 mins

DMMP DMMP Simulant for sarin nerve gas 1,000 15 mins > 60 mins

Tear gas CS Tear gas 8 >8 hours >8 hours

Tear gas CN Tear gas 16 >8 hours >8 hours

Hydrogen sul�de H2S Acid gas toxic industrial chemical 1,000 15 mins > 600 mins




Legal and trademark information. Copyright © 2015 Elmridge Protection Products, LLC. All rights reserved.

Certi�ed to American Standard for Air-Purifying Respiratory Protective Smoke Escape Devices ASTM E2952

• Maintenance-free• At 9.5 in. (240mm) can withstand up to 1700°F (927°C) in radiant heat• Twin �lters for easier breathing• Improved �eld of view compared with single �lter in front• Hood is a clear material resulting in an unobstructed �eld of view• High visibility re�ective strips for easy recognition• Highest level of protection maintained by silicone neck dam• Protects lungs, head, eyes, and face• Can be used with eyeglasses, beards, and long hair• Packaged in puncture- and- water-proof laminate barrier• Quick and easy donning• Latex-free• One universal size

SMOKE/FIRE HOOD

®

Certified Model ASTM E2952

ElmridgeProtection.com 561-244-8337 • [email protected]

Distributed By:

Weight of iEvac® in ready-to-use con�guration: 1.4 lbs. – 635 grams

Size of iEvac® folded in vacuum-sealed foil bag: Height – 5 ½ in (14 cm)

Width – 5 ½ in (14 cm)

Depth – 4 ¾ in (12 cm)

Shelf life: 5 ½ years from date of manufacture

For one-time use only. Read instructions before using.

Ordering info: iEvac® Smoke/Fire Hood item # EBP-900 iEvac® Demo Hood item # EBP-200 iEvac® Nylon Carry-pouch item # EBP-270 iEvac® Single Wall-mounting Rack item # EBP-305 iEvac® Wall-mounting Cabinet

2010-2011

iEvac® vacuum-sealed in foil bag

The iEvac® is listed on DHS’s Authorized Equipment List & Standardized Equipment List

ResponderKnowledgeBase


SMOKE/FIRE HOOD

®



Distributed By:








2010-2011






Valley Associates has been involved in X-Ray training for over 10 years. We have done training and maintenance on Astrophysics, Smiths, Voti, Rapiscan as well as AS&E all over Canada. Our course puts a lot of emphasis on item identi�cation, safety considerations, as well as threat detection.

Our course takes just under a full working day to deliver. The �rst 3-4 hours are a presentation on Safety Code 29, Safe Operating Procedures, Image analysis and Threat detection, with a review test at the end of the session. After a break for lunch, the last 3 hours will be hands on opera-tion of the X-Ray Baggage Scanner, which will include using the controls, threat detection, and good operating habits. We have a number of training items which simulate explosives and weapons that we use to help teach the attendees.

The training covers all the items required by Health Canada, especially Safety code 29, which inlcudes the responsibilities of the Employer as well as the Employee to ensure safe operation of X-ray emitting devices.We have a strong emphasis on all safety considerations, not limited to just radiation exposure, but also best practices, and mechanical/electri-cal safety concerns,

Certi�cations for completion of X-Ray course will be provided by the end of training for all people being trained.

All training courses cover weapon and explosive detection, with emphasis on the threats operators are most likely to encounter.

Safety Code 29 X-Ray Training Course


SMOKE/FIRE HOOD

®



Distributed By:








2010-2011






Valley Associates has developed a course designed speci�cally for increasing an experienced operators capabilities for threat detection. This is an upgrade over the standard safety code 29 course ,which is intended for new operators to assist them with the understanding of safety considerations, X-Ray operation, and a general idea of possible threats. Our Advanced Threat Detection course is intended to help strengthen detection abilities, and learn to use all of the X-Ray system features to the maximum limit. This training course is tailored to provide as close to 1 on 1 training as possible, with a much wider variety of training aids, with special concentration on threats that we �nd are becoming more common place.

The training covers threat detection, and item identi�cation. This concentrates on training to spot dangerous items, devices, and powders as they are being processed through the machine, as well as ensuring the operator is fully familiar with all of the functions and capa-bilities of the X-Ray Baggage Scanner they are operating on.

Procedural training will be provided, as there are methods in addition to using the baggage X-Ray Scanner to identify a threat, there are often visual markers, and occasionally these are just as reliable at detecting a potential threat as using the unit itself.

Certi�cates for completion of X-Ray Threat Detection course will be provided by the end of training for all people being trained.

Advanced X-Ray Threat Detection Training Course



Established in 1993, Valley Associates Corporation, through its operating Company Valley Associates Global Security Corporation is a major provider of Systems, Services and Product to Military and Public Security organizations in Canada and abroad. The company and its employees are cleared to NATO Secret II, as well as being registered with the Controlled Goods Program and with the US Dept. of State as an international Broker.Valley Associates is also Trace Certi�ed as fully compliant with the US Foreign Corrupt Practices Act. We conduct all of our business utilizing Best Practices.

in Montreal, Halifax, and Vancouver.

Through its operating companies the Corporation currently represents over 100 sector leading manufac-turers, and is proud of the long standing relationshipswith these �rms. Many have been in place since Valley’s founding in 1993. The combination of Valley Associates business development acumen, program/project man-agement skills, and product design and development capabilities teamed with the manufacturing strength and breadth of technical expertise of our VendorPartners, uniquely quali�es Valley to support our client’mission speci�c needs.

About Valley

Contact usEmail: [email protected]

O�ce: 613.830.1880

2108 Old Montreal Rd.Cumberland, ON K4C 1G8

ph 613.830.1880www.valleyassociates.com

Documents

Entrance Security Catalogue · switch secured in the lockable cabinet. Bright LED Indicators Eye-level green and red status lights, and zone indicators are highly visible, even in