BACnet /IP: The enteliTOUCH display can com-municate over BACnet /IP, the standard in BACnet networking. With BBMD support it can also com-municate with remote networks.

BACnet Ethernet: BACnet over Ethernet gives the enteliTOUCH a simple way to communicate with other BACnet devices.

Ethernet Switch: The onboard Ethernet switch provides a convenient service port. It can also be used to daisy chain multiple enteliTOUCH devices without the need to home run each device.

ZigBee® Wireless: The optional ZigBee wireless module gives the enteliTOUCH display the power to control dozens of wireless enteliMESH control-lers and sensors.

To learn more about enteliTOUCH or any of Delta

Controls’ enteliSYSTEM™ products, please contact us

online at deltacontrols.com

Control Inputs

The enteliTOUCH display contains up to three control inputs, which reduces installation costs and eliminates the need for additional wall-mounted sensors.

Thermistor: The on-board or external thermistor input measures temperature for accurate control of heating or cooling.

Humidity Sensor: The optional humidity sensor makes it easy to monitor and control humidity in occupied areas, without the need to install a dedicated sensor.

Motion Sensor: The optional motion sensor makes it easy to detect the occupancy state of a room, drastically reducing energy costs by relaxing set-points and shutting off lighting or other systems.

Network

Delta Controls’ control devices are well known for their networking capabilities. enteliTOUCH is no exception.

entelitouch™ to u c h S c re e n | B u i l d i n g c o n t ro l l e r

touch Screen | Building controllerentelitouchenergy+environment+intelligence=entelligenntelligence=entelligence energy+intelligenence energy+environment+intelligence energ

copyright © 2010 delta controls. All r ights reserved.

enteliTOUCH

The enteliTOUCH Building Controller is a 7-inch diagonal, high-resolution, wide-screen format, color LCD used for interfacing with the Delta Controls Building Automation System. It uses BACnet® to communicate with controllers on a local area network and can act as a wireless coordinator to enteliMESH™ products. User-created graphics allow the enteliTOUCH to be completely customized for a given application.

Visualization and control at a finger’s touch

Whether installed in mechanical rooms or public areas, the enteliTOUCH provides unprecedented levels of visualization and control for your building.

Energy Gauges, Bar Charts, Line Graphs, Sched-ules, Setpoints and customized building system graphics provide rich, interactive user experi-ences for facility managers, technicians and occupants alike.

Intuitive touch screen technology and a high-res-olution color display, combine with customizable screens to provide an easy-to-use, graphical interface tailored to your needs.

Building Controller

In addition to its display capabilities, the enteli-TOUCH device is also a fully programmable BACnet Building Controller. GCL+, Inputs, Outputs, Variables, Schedules, Calendars and Trends provide everything needed for superior control applications.

Embedded Web Server

enteliTOUCH contains an embedded Web server that provides a network-accessible remote inter-face to users from any browser. Quickly adjust schedules, calendars, and setpoints from anywhere.

Alarm Management

Alarm Annunciation lets operators know when an alarm is occurring by playing an alarm sound through the onboard speakers.

Alarm Notifications pop up on screen to let op-erators or occupants know that there is an issue with their system that needs their attention.

Active Alarms list up to 100 alarms so that oper-ators can easily review and acknowledge mul-tiple alarms.

Alarm E-mails are automatically sent from the device to subscribed recipients, reaching them on their PC or smart phone, wherever they are.

enteliMESH

The enteliTOUCH device can be used as the main interface to enteliMESH wireless controllers and sensors, making zone control applications such as VAV, fan coil and heat pump simple and cost effective.

Stand-Alone Configuration screens on the enteli-TOUCH panel make it easy to set up enteliMESH controller applications without the need for lap-tops or software.

enteliTOUCH also acts as the Wireless Coordinator for the enteliMESH network. Joining, adding and removing wireless devices can all be done through the touch screen interface.

Applications

enteliTOUCH can been used as the main interface in numerous applications such as conference centers, hotels, high-end residences, mechanical rooms, nursing stations and light commercial buildings.

enteliTOUCH is a building controller and allows operators to control, monitor and manage build-ing HVAC systems by using custom real-time graphics. The interface enables adjustment of schedules, calendars and overrides, and also provides visual information on trending and alarms. The enteliTOUCH is freely programmable and can be used to adjust sequences of operation in mechanical systems.

The enteliTOUCH display can be wall-or panel- mounted in mechanical rooms, which allows for monitoring and setting schedules for air handlers, boilers, chillers and other mechanical equipment.

Multi Trending

The ability to display multiple trend logs greatly enhance the monitoring and troubleshooting capabilities of the enteliTOUCH display. Up to eight values can be trended simultaneously with the ability to zoom in and pan back and forth through historical data. Perfect for monitoring or troubleshooting.

BACnet® is a registered trademark of American Society

of Heating, Refrigerating, and Air-Conditioning Engineers

(ASHRAE).

ZigBee® is a registered trademark of the ZigBee Alliance.

entelitouch™ to u c h S c re e n | B u i l d i n g c o n t ro l l e r