Enhanced Management Frame (EMF) COPPER CONNECTIVITY

A Corning® Solutions Product

Individual 12-fiber modules

Integrated splice capability

Modules extend/retract independently

Top and rear strain-relief

Reduced fiber routing density

Improved density

Maximize scalability and modularity

Enables on-frame splicing without sacrificing density when using standard EMF modules

Minimizes connector disturbance

Ensures bend-radius control

Reduce fiber trough build by 91% when using EMF-MTP® Housings

Increased density with EMF-Pretium EDGE® Housings and modules with LC Connectors - 2,304 fiber terminations

features and benefits | The Enhanced Management Frame (EMF) is designed for FTTx, cross-connect and interconnect applications. The integrated modular design allows growth and expansion of a fiber management system one frame, one module and one fiber termination at a time. User-friendly features such as single jumper length, in-bay jumper storage, transparent modules and multiple inter-bay routing options make this frame an ideal solution for both FTTx deployments and traditional cross-connect and interconnect applications.

The EMF utilizes a single 12-fiber module that may be configured with splitters/couplers and wavelength division multiplexers (WDMs) that support today’s FTTx passive optical networks. Other module options include pigtailed, stubbed, empty and with adapters only. Each module extends and retracts independently from the frame for minimal adjacent connector disturbance and a “quiet-front” appearance. Splicing facilities within the module maintain the maximum 1728-fiber terminations with SC and LC connectors. By splicing off the frame and specifying EMF-Pretium EDGE housings/modules and LC connectors, frame density increases to 2,304 fiber terminations.

Integrated fiber management within modules will store 3 m of buffer tube or ribbon slack and 1 m of 900 µm pigtail slack.

Factory-stubbed termination modules and housings are available for both the left and right side of the frame. By specifying the EMF-MTP housings on the left and right side of the EMF frame, the quantity of individual fiber jumpers can be reduced from 1,728 to 144 with 12-fiber MTP module stubs.

Enhanced Management Frame | Photo FOH003

Enhanced Management Frame (EMF)

|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G

|

SPECIFICATION SHEET EVO-278-EN | PAGE 1




Inter-bay jumper slack storage enables the use of a single jumper length, minimizing the variation of jumper length. Staggered side-mounted routing guides on the module housings allow clean fiber management and control pathways for front-to-rear jumper routing. There is full bend-radius control throughout the frame with top and rear strain-relief.

Open Top for Easy Interconnection Routing

Top Cable Strain-Relief

Integrated IBU for Single- Jumper-Length Slack Storage

Optional Full-Length Rear Troughing System

Full Radius Control for Minimum-Bend- Radius Protection Throughout Frame

Protective Lower Fiber Cover

Wide Fiber Routing Area with Separate Routing Zones

Enhanced Management Frame | Photo FOH004


SPECIFICATION SHEET EVO-278-EN | PAGE 3 |

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G

|Enhanced Management Frame (EMF)

EMF Housing | Photo FOH035EMF Housing with Pretium EDGE® Module | Photo LAN2325

EMF Module | Photo FOH032

Module Handle Folds Down for Enhanced Connector Access

Individual 12-Fiber Access from Sliding Module Full Radius Control

Transparent Module for Easy Internal Inspection

Front-Loading Housing; Six 12-Fiber Modules in each Housing Terminate 72 Fibers

Staggered Side-Routing Guides Prevent Jumper Stack-Up




Left Module (Top View) | Drawing ZA-926

72 Left Modules and72 Right Modules

per Frame

6 Left Modules and6 Right Modules

per Housing

Modules per Housing and Frame | Drawing ZA-921

1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12

EMF- Pretium EDGE®

Left-Hand ModuleEMF- Pretium EDGERight-Hand Module

EMF - Pretium EDGE Housing

Left Module (Bottom View) | Drawing ZA-931

EMF-Pretium EDGE® Housing | Drawing ZA-3873

*Note: For adapter part numbers, see page 6.



P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G


EMF Module, 12-Fiber | Photo FOH011

Housings and Modules Housings and modules for the EMF are available in four configurations: •Empty •Loadedwithadaptermodules •Pigtailed •Stubbed

Housings and modules for the EMF-Pretium EDGE®

are available in two configurations: •Empty •Loadedwithmodules

specifications |

Adapter Capacity

Adapter Terminations Terminations Terminations Type per Module per Housing per Frame

SC 12 72 1,728 LC 12 72 1,728 FC 12 72 1,728 LC 12 96 2,304

Dimensions (H x W x D) cm (in)

13.97 x 21.92 x 29.84 (5.5 x 8.6 x 11.75)

13.97 x 21.92 x 29.84 (5.5 x 8.6 x 11.75)

Description

Empty Left EMF Housing; holds 6 EMF modules

Empty Right EMF Housing; holds 6 EMF modules

Empty Left-Hand Housing with MTP® option, holds 6 EMF modules

Empty Right-Hand Housing with MTP option, holds 6 EMF modules

Empty Left EMF-Pretium EDGE Housing, holds 8 Pretium EDGE modules

Empty Right EMF-Pretium EDGE Housing, holds 8 Pretium EDGE modules

Part Number

Housings – Empty

CCF-CML-072

CCF-CMR-072

CCF-CML-07289

CCF-CMR-07289

CCF-CML-96EDGE

CCF-CMR-96EDGE

ordering information |


ordering information | (continued)




13.97 x 21.84 x 29.84 (5.5 x 8.6 x 11.75)

13.97 x 21.84 x 29.84 (5.5 x 8.6 x 11.75)

Description

Left EMF Housing with adapters and modules installed

Right EMF Housing with adapters and modules installed

Part Number

Housings – Loaded with Modules and Adapters

CCF - CML - |1 |2

CCF - CMR - |1 |2

|1Select number of fibersrequiring adapters.00 = Empty module 01-12 = 1-12 adapters

|2Select adapter code.Single-Mode 3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angled

Multimode 39 = SC A7 = LC duplex

Notes: 1) Maximum SC adapter capacity is 12 per module.

2) Maximum LC adapter capacity is 6 duplex per module.

Part Number Example

Part Number

CCF-CML-726C

Description

Left EMF Housing loaded with modules, 72 SC APC adapters installed

Single Adapter Only Part Numbers

Part Number

ADP-SC00-CCGDF-CLS ADP-SC00-CCNDF-CLS ADP-DLC0-CCGRC-CLS ADP-DLC0-CCNRC-CLS ADP-FC00-MMXTH-NLS

Description

Adapter, SC APC simplex with mounting clip

Adapter, SC UPC simplex with mounting clip

Adapter, LC APC duplex, reduced flange, integral clip

Adapter, LC UPC duplex, reduced flange, integral clip

Adapter, FC UPC, threaded flange



P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G



2.24 x 21.92 x 29.84 (0.9 x 8.6 x 11.75)

2.24 x 21.92 x 29.84 (0.9 x 8.6 x 11.75)

Description

Left Module with adapters installed; specify adapter provision type from charts below

Right Module with adapters installed; specify adapter provision type from charts below

Part Number

Modules – Loaded with Adapters

CCML - |1

Part Number

Left-Hand EMF 12-Port Module with MTP® Cable Assembly

Right-Hand EMF 12-Port Module with MTP Cable Assembly

EMF - MTP® Modules

CCML1203 - MT00C

CCMR1203 - MT00B

|1

|1

|2

CCMR - |1 |2

Part Number Example

Part Number

CCML12-6C

CCMR06-B3

CCMR00-A7

Description

Left EMF Module with 12 SC APC adapters installed

Right EMF Module with 6 LC APC adapters installed

Right EMF Module - Empty (no adapters) - LC type mountings installed for future adapters.




Note: Stubbed or pigtailed housings are available separately in a wide array of configurations. Each complete housing can accommodate up to six modules. Stubbed or pigtailed modules are also available separately in the same array of configurations. Individual modules can be easily loaded into unused positions within a previously installed housing. Contact your Corning Cable Systems Customer Service Representative for module and housing ordering information at 800-743-2675 or internationally at +1-828-901-5000.

|1Select number of fibersrequiring adapters.00 = Empty module 01-12 = 1-12 adapters



Notes: 1) Maximum SC adapter capacity is 12 per module.

2) Maximum LC adapter capacity is 6 duplex per module.

EMF module | Photo FOH356 EMF frame | Photo FOH364





Housing and Modules with Pigtails

M - - 1 0

|1Select hardware type.CC = Pigtailed housingCM = Pigtailed module

|2Select hardware mounting side.R = RightL = Left

|6Select mode of operation.R = Single-modeK = Multimode 62.5/125 µm T = Multimode 50/125 µm

|7Select pigtail type.J = RibbonH = MIC® 900 µm buffered fiber

Notes: 1) Housings are shipped individually with a maximum fiber count of 72.

2) Pigtailed modules ship with both Q-Pak and heat-shrink holders.

|3Select total fiber count.01-72 = Enter number Example: 6 fibers = 06 12 fibers = 12 72 fibers = 72See Note 1.

|5Select connector type.Single-Mode3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angledMultimode39 = SC 17 = FC A7 = LC duplex

|4Select fiber count of each module.01-12 Example: 6 fibers = 06 12 fibers = 12

|1 |2 |3 |4 |5 |6 |7 |8

Part Number Example

Part Number

CCL72M12-3C-1RJ-0

CMR12M12-6C-1RH-0

Description

Pigtailed Left-Hand EMF Housing, total fiber count is 72 fibers using 12-fibers per module, connectors are SC UPC, pigtail type is a 1 m single-mode ribbon

Pigtailed Right-Hand EMF Module, 12-fibers, connectors are SC APC, pigtail type is 1 m MIC 900 µm buffered fiber

|8Select jumper tracing option.- = No jumper tracingS = SearchLite® Tracing System (SC UPC only)



P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G



Pretium EDGE® Modules

ECM - M12 - -

|1Select polarity type.U = UniversalS = Straight-throughSee Note 1.

|2Select LC Duplex adapters on front of modules.04 = Single-mode OS205 = Multimode OM3/OM4

|3Select Pinned MTP® on rear of module.93 = Multimode OM3/OM489 = Single-mode OS2

Note: 1) Universal polarity accounts for 1 send and 1 receive fiber per pair so fiber 1 (send) will come out on fiber 2 (receive) on other end.

Straight-through polarity is most often used with SM fiber using two different wavelengths for send and receive.

|4Select fiber type.R = OS2T = OM3Q = OM4

|1 |2 |3 |4

Pretium EDGE Module with VFL-Compatible| Photo LAN1545




Housing and Modules with Stubbed Cable

- - 1

|1Select hardware type.CCF = 72-fiber EMF housingCCM = 12-fiber EMF module

|2-9Select hardware mounting side.R/B = Right-side housing with cable entry at top rightL/C = Left-side housing with cable entry at top left

|6Select fiber type.- = Single-modeK = Multimode 62.5/125 µm T = Multimode 50 CC

|7Select cable type.900 µm Coated Fiber Cables81 = MIC® Riser Indoor Cable with TBII® Buffered Fiber 88 = MIC Plenum Cable with Flexible TBII Buffered Fiber 250 µm Coated Fiber Loose Tube Cables (2-144 fibers)W4 = ALTOS® All-Dielectric Outside Plant Cable W5 = ALTOS Single-Armored Outside Plant Cable W6 = ALTOS Double-Armored Outside Plant Cable W7 = ALTOS Riser Cable WZ = ALTOS LSZH™ Cable WF = FREEDM® Indoor/ Outdoor Cable Ribbon Fiber Cables (12-144 fibers)C4 = SST-Ribbon™ All-Dielectric Outside Plant Cable C5 = SST-Ribbon Single- Armored Outside Plant Cable C6 = SST-Ribbon Double- Armored Outside Plant Cable C7 = Ribbon riser cable CF = FREEDM Ribbon Riser Indoor/Outdoor Cable

Note: 1) One housing shipped for 1-72 fibers. Two housings shipped for 144 fibers.

2) Not all part number configurations are available. Please confirm availability with a Corning Cable Systems Customer Service Representative.

|3Select total fiber count.01-72 = Enter number E4 = 144 fibers Example: 12 fibers = 12 144 fibers = E4See Note 1.

|5Select connector type.Single-Mode3C = SC ultra 6C = SC angled A9 = LC duplex ultra B3 = LC duplex angledMultimode39 = SC A7 = LC duplex

|4Select cable length in meters.1-99 = Enter number 99+ = Enter alphanumeric code from Table A

|1 |2 |3 |4 |5 |6 |7 |8

Part Number Example

Part Number

CCFL7231-3C-C7SL1C

Description

Left-Hand 72-Fiber Stubbed EMF Housing with 31 m of single-mode ribbon riser cable attached and terminated with SC UPC connectors featuring SearchLite Tracing System adapters; cable enters from the top

|8Select special options.00 = Standard configurationSL = SearchLite® Tracing System (SC UPC only)

|9

|9See selection block 2.



P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G

|Enhanced Management Frame (EMF)A Corning® Solutions Product

|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G



Description

Left-Hand EMF 72-Port Housing with MTP Cable Assembly

Right-Hand EMF 72-Port Housing with MTP Cable Assembly

Part Number

EMF-MTP Housings

CCML7203 - - MT89C|1

CCMR7203 - - MT89B|1


Note: 1) Maximum number of SC adapters per module is 12, per housing is 72 (72 fibers). Maximum number of LC adapt-ers per module is 6 duplex, per housing is 36 (72 fibers)

Table A: Codes for Fiber Counts and Cable Stub Lengths Over 99 A _ = 10_ M_ = 21_ B _ = 11_ N _ = 22_ C _ = 12_ P _ = 23_ D _ = 13_ Q _ = 24_ E _ = 14_ R _ = 25_ F _ = 15_ S _ = 26_ G_ = 16_ T _ = 27_ H _ = 17_ U _ = 28_ J _ = 18_ V _ = 29_ K _ = 19_ W_ = 30_ L _ = 20_

Examples:E4 = 144 fiber A5 = 105 m

Notes: 1) “I” and “O” are not used.2) Lengths from 100 to 339, use single letter plus number (1 to 9).3) Lengths over 339 m can be ordered only in 10 m increments.

X _ = 31_ AH = 410 Y _ = 32_ AJ = 420 Z _ = 33_ AK = 430 AA = 340 AL = 440 AB = 350 AM = 450 AC = 360 AN = 460 AD = 370 AP = 470 AE = 380 AQ = 480 AF = 390 AR = 490 AG = 400 AS = 500

Table B: Standard Cable Types for Stubbed Hardware

Cable Type Code Description Fiber Count Fiber TypeC4 SST-Ribbon™ Dielectric Outdoor Cable 12-144 Single-modeC7 Ribbon riser indoor cable 12-144 Single-modeW4 ALTOS® All-Dielectric Outside Plant Cable 12-144 Single-modeCF FREEDM® Ribbon Riser Indoor/Outdoor Cable 12-144 Single-modeWF FREEDM Indoor/Outdoor Cable 12-144 Single-modeW7 ALTOS Riser Cable 12-144 Single-mode

Note: Max cable size for EMF housings is 144 fibers.




213.4 x 86.4 x 43.12 (84 x 34 x 17)

30.5 x 86.4 x 43.2 (12 x 34 x 17)

61 x 86.4 x 43.2 (24 x 34 x 17)

137.2 x 86.4 x 43.2 (54 x 34 x 17)

213.4 x 86.4 x 43.2 (84 x 34 x 17)

5.08 x 86.4 x 14.2 (2 x 34 x 5.6)

N/A

86.4 x 43.12 (34 x 17)

Description

7-ft EMF Frame Mounts 12 LH and 12 RH housings

1-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 8 ft high

2-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 9 ft high

4.5-ft EMF Frame Extension Kit used to tie a 7-ft frame to overhead rack 11.5 ft high

7-ft EMF Frame with 12 rear troughs attached

Individual Rear Trough for EMF

Zone 4 Mounting Bolt Kit

Isolation Pad Kit for EMF frame (includes mounting hardware)

Part Number

Empty Frame

CCF-FRAME-7

CCF-FRAME-EXT-7-8

CCF-FRAME-EXT-7-9

CCF-FRAME-EXT-7-11

CCF-BAY-7

CCF-JT-REAR

QFMABK1A

CCF-PAD-KIT


4.5 Ft EMF Extention

ZA-3598

4.5 ft EMF Extension Kit (CCF-FRAME-EXT-7-11) | Drawing ZA-3598

Network Bay FrameEnhanced Management Frame (EMF)

ZA-3599

EMF Frame (CCF-FRAME-7) | Drawing ZA-3599



|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G


Dimensions of Cable Opening(Diameter) cm (in)

8 (0.32)

1.05 (0.40)

1.3 (0.50)

1.6 (0.63)

1.75 (0.70)

2.05 (0.80)

2.06 (0.81)

N/A

N/A

Description

Cable Strain-Relief Grip






Large Cable Strain-Relief Bracket, for cable dimensions above 0.81-in. Includes 1 bracket and all supporting hardware

Cable Clamp Assemblies, hold up to 3 cables; order strain-relief grips separately

Cable Bonding Kit; includes four 14-in ground wire assemblies, one 4-position ground bar and hardware to bond cables to frame ground

Part Number

A0388952

A0388954

A0388955

A0388956

A0388957

A0388958

CCF-LRG-CAB-BKT

A0375902

A0388959


Notes: 1) Strain-relief components not required when using housings.2) Each EMF Frame ships with 12 cable clamp assemblies. Strain-relief grips are sold separately.

Strain-Relief Components for Front Strain-Relief

EMF Cable Clamp Assemblies | Drawing ZA-3291

Cable Strain Relief Bracket

ZA-3600Large Cable Strain-Relief Bracket (CCF-LRG-CAB-BKT) | Drawing ZA-3600

Cable Strain-Relief Grip (see note 2)

Clamps



Front-Mounting Workshelf EMF front-mounting workshelf provides a convenient workspace for craft persons. The shelf is capable of supporting up to 50 lbs.

EMF Workshelf | Photo FOH026


Description

Front-Mounting EMF Workshelf

EMF Service Module Bracket

Part Number

CCF-SHELF

P0707979



36.2 x 85 x 38 (14.25 x 33.5 x 15)

3.0 x 6.0 x 12.0(7.6 x 15.2 x 30.5)




|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G

|

EMF Optical Components The EMF FTTx splitter module allows for deployment of passive optical network (PON) architecture with the optical splitter in a central office frame. It is available in dual 1x16 or 1x32. Available only in LC APC and LC UPC. The EMF course wavelength division multiplexing (CWDM) modules are available in SC APC and SC UPC. EMF splitter modules occupy two positions inside the EMF housings; CWDM modules occupy one position. The modules are designed to meet applicable sections of Telcordia GR-1209-Core and GR-1221-Core.

X

Y

Z

1 x 32 Splitter Module

ZA-3329

EMF 1x32 Splitter Module | Drawing ZA-3329

ordering information |Description

EMF Left-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters

EMF Right-Hand 1x32 Splitter Module with LC APC single-mode input/output adapters

EMF Left-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters

EMF Right-Hand Dual 1x16 Splitter Module with LC APC single-mode input/output adapters

EMF CWDM Demultiplexing Right-Hand Module; 9 IN, 1 OUT; SC UPC

EMF CWDM Demultiplexing Right-Hand Module; 9 IN, 1 OUT; SC APC

EMF CWDM Multiplexing Right-Hand Module; 1 IN, 9 OUT; SC UPC

EMF CWDM Multiplexing Right-Hand Module; 1 IN, 9 OUT; SC APC

Part Number

MLS1AAB30B301132

MRS1AAB30B301132

MLS1AAB30B302116

MRS1AAB30B302116

MRC1AA3C03C01ZZZ

MRC1AA6C06C01ZZZ

MRC1AA3C03C01XXX

MRC1AA6C06C01XXX

Jumpers 2.0 mm jumpers recommended length within frame is 5.5 m. See EVO-29-EN for ordering information. See SRP 003-599 for additional jumper recommendations.

Part Number Example

Description

SC-SC single-fiber, 2.0 mm jacketed cable assembly

Part Number

444401R2131005M



Inter-Bay Distribution (IBD) EMF inter-bay distributors are designed to be placed between two EMFs and are used to store and manage jumper slack. They each require a 5-in gap between frames for mounting.

End Cap and Door Cover EMF end caps protect the end of a bay line-up while providing a clean, finished appearance. A dual door front cover provides individual access to the left or right column of termination housings.

EMF_IBD_Install

ZA-3251

EMF Inter-Bay Dual Storage Unit (IBD) | Drawing ZA-3246

EMF_End Cap_Install

ZA-3250

EMF End Cap | Drawing ZA-3250

EMF Dual Door Front Cover - Install

ZA-3246

EMF Dual-Door Front Cover | Drawing ZA-3251

Dimensions(H x W x D) cm (in)

213.4 x 12.7 x 30 (84 x 5 x 12)

213.4 x 12.7 x 30 (84 x 5 x 12)

206 x 86.4 x 2.54 (81 x 34 x 1)

206 x 86.4 x 2.54 (81 x 34 x 1)

213.4 x 38.1 x 2.54 (84 x 15 x 1)

40.3 x 19.8 (15.9 x 7.9)

Description

IBD designed exclusively for use with the EMF; features left-to-right fiber routing, internal slack storage and front-to-rear feed through

Contains the CCF-EC-7 end cap to create a single kit for ending a bay line-up with slack storage and end protection

Simple One-Piece Decorative Lift-Off Front Panel Cover for the front of the EMF

Dual-Door Lift-Off Front Cover Panels for the EMF, provides individual access to the left or right column of termination housings

Decorative End Cap for protecting the end of a bay line-up

Isolation Pad for EMF IBD (mounting hardware not required)

Part Number

CCF-IBD-T3

CCF-IBD-EC-7

CCF-COVER-7

CCF-COVER-2-7

CCF-EC-7

CCF-IBD-PAD-KIT





|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G


Transitional Inter-Bay Managers There is a series of transitional inter-bay managers designed to route fiber from the existing FiberManager™ System (FMS) line-ups into new enhanced management frame (EMF) line-ups when the two frame systems are placed side by side. Each transition bay option is distinguished by its relation to the EMF frame and the relative positions of the EMF and FMS frames to each other. Illustrations, application descriptions and part numbers are shown below.

Transitional Interbay Managers (IBU)

CCF-IBU-FMS-7-L CCF-IBU-FMS-7-R CCF-IBU-FMS-7-LF CCF-IBU-FMS-7-RFCCF-IBU-FMS-C

��-��

CCF-IBU-FMS-C and CCF-IBU-FMS-C-JT | Drawing ZA-2629



��-��

CCF-IBU-FMS-7-L and CCF-IBU-FMS-7-R | Drawing ZA-2629



��-��

CCF-IBU-FMS-7-LF and CCF-IBU-FMS-7-RF | Drawing ZA-2629





Dimensions(H x W x D) cm (in)

84 x 12 x 5 (213.4 x 30 x 12.7)

84 x 12 x 5 (213.4 x 30 x 12.7)

84 x 12 x 5 (213.4 x 30 x 12.7)

84 x 12 x 5 (213.4 x 30 x 12.7)

84 x 12 x 5 (213.4 x 30 x 12.7)

84 x 12 x 5 (213.4 x 30 x 12.7)

Description

IBU that feeds fiber from an FMS to an EMF positioned on the left; hardware order looking from the front and left to right is EMF-IBU-FMS; suitable only for EMF and FMS frames positioned with flush rear-most surfaces

IBU feeds fiber from an FMS to an EMF positioned on the right; hardware order looking from the front and left to right is FMS-IBU-EMF; suitable only for EMF and FMS frames positioned with flush rear-most surfaces.

IBU that feeds fiber from an FMS to an EMF positioned on the left; hardware order looking from the front and left to right is EMF-IBU-FMS; suitable only for EMF and FMS frames positioned with flush front-most surfaces

IBU feeds fiber from an FMS to an EMF positioned on the right; hardware order looking from the front and left to right is FMS-IBU-EMF; suitable only for EMF and FMS frames positioned with flush front-most surfaces

Center IBU for use with an FMS positioned directly between two EMF frames; two IBUs shipped per kit

Rear Troughs for use with the CCF-IBU-FMS; troughs span the rear of the FMS frame

Part Number

CCF-IBU-FMS-7-L

CCF-IBU-FMS-7-R

CCF-IBU-FMS-7-LF

CCF-IBU-FMS-7-RF

CCF-IBU-FMS-C

CCF-IBU-FMS-C-JT



Troughs Between Custom IBD and Standard IBD Units

ZA-3601

Right Rear Trough

#12-24 ThreadCuttingScrews

Center Rear Trough

Custom IBD

Standard IBD

Troughs Between Custom IBD and Standard IBD Units | Drawing ZA-3601

EMF to UDF Transition Corning Cable Systems EMF to UDF Integration System provides a unique solution that enables the mounting of traditional optical hardware and electron-ics right next to the modular EMF frame. Unlike any other solution in the industry, this system provides pre-engineered front to rear and lateral fiber management pathways between a modular style high-density frame and traditional 19- or 23-in frames without requiring costly overhead raceways.

specifications |

Trough to be Used on UDF Frame and IBD Unit Arrangement

Center Rear Trough UDF is between two custom IBD units Right Rear Trough UDF is to right of EMF when viewed from front and UDF has no IBD or has a standard IBD on its right side Left Rear Trough UDF is to left of EMF when viewed from front and UDF has no IBD or has a standard IBD on its left side

Description

Individual Jumper Trough, EMF-UDF, center, rear trough, platinum

Individual Jumper Trough, EMF-UDF, right, rear trough, platinum

Individual Jumper Trough, EMF-UDF, left, rear trough, platinum

IBU, transition, EMF-UDF, platinum

Part Number

Transition Equipment

CCF-JT-UDF-CR

CCF-JT-UDF-RR

CCF-JT-UDF-LR

CCF-IBD-UDF-7


|

PR

ETER

MIN

ATED

SYS

TEM

S

|

CAB

LES

|

C

ON

NEC

TOR

S

|

CAB

LE A

SSEM

BLIE

S

| H

ARD

WAR

E

|

CO

PPER

CO

NN

ECTI

VITY

|

S

PLIC

E AN

D T

EST

EQU

IPM

ENT

|

TR

AIN

ING






2-ft extension

4.5-ft extension 7-ft UDF frame

ZA-1628

UDF Equipment Rack and Extensions | Drawing ZA-1628

Frame Components Equipment RacksThe backbone of each distribution bay is its equipment rack. Standard 58.4 cm (23 in) equipment racks are available in 2.1 m (7-ft) heights. 2.7 m (9-ft) and 3.5 m (11.5-ft) heights are achieved using 2-ft and 4.5-ftextensions. Rack styles feature industry-standard EIA hole spacing.

Description

7-ft Unequal Flange Equipment Rack, 23-in, platinum

7-ft Unequal Flange Equipment Rack, 19-in, platinum

2-ft Rack Extension for use with UDF rack (23-in), platinum

2-ft Rack Extension for use with UDF rack (19-in), platinum

4.5-ft Rack Extension for use with UDF rack (23-in), platinum

4.5-ft Rack Extension for use with UDF rack (19-in), platinum

Part Number

Equipment Racks

UDF-ERO-23E-07-000

UDF-ERO-19E-07-000

Extensions

UDF-EXT-23E-02-000

UDF-EXT-19E-02-000

UDF-EXT-23E-04-000

UDF-EXT-19E-04-000

ordering information |Dimensions(H x W x D) cm (in)

213.4 x 65.8 x 25.7 (84.0 x 25.9 x 10.1)

213.4 x 55.6 x 25.7 (84.0 x 21.9 x 10.1)

60.9 x 65.8 x 25.7 (24 x 25.9 x 10.1)

60.9 x 55.6 x 24.4 (24 x 21.9 x 9.6)

137 x 65.8 x 25.7 (54 x 25.9 x 10.1)

137 x 55.6 x 24.2 (54 x 21.9 x 9.6)

ShippingWeight kg (lb)

22.6 (50)

22.6 (50)

9.1 (20)

8.2 (18.1)

15 (33.1)

14 (31)

A Corning® Solutions ProductUDF-EC-7

ZA-1266

84"

12"

2.5"

84"

15"

2.5"

End Cap (UDF-ECO-07-000) | Drawing ZA-1266

Frame Components End CapsEnd caps provide protection for the end of each row of bays. End caps are not required between the racks in a given row (must be ordered separately).

Foot CapsFoot caps are a protective covering at the base of the rack that allow mounting of A/C outlets that are required in the frame system.

Inter-Bay Storage UnitsInter-bay storage units (IBUs) route and manage jumpers on the front of the UDF. The IBUs have nine routing hubs, a top jumper trough bridge and a bottom jumper trough.

Description

End Cap for 7-ft unequal flange rack (UDF)

2-ft End Cap Extension for unequal flange rack (UDF)

4.5-ft End Cap Extension for unequal flange rack (UDF)

Inter-Bay Storage Unit with jumper trough, UDF, single sided

Part Number

End Caps

UDF-ECO-07-000

UDF-EC-EXT-7/9

UDF-EC-EXT-7/11

Inter-Bay Storage Units

UDF-IBU-7-1


212.4 x 7.6 x 30.5 (83.6 x 3.0 x 12.0)

60.9 x 7.6 x 30.5 (24.0 x 3.0 x 12.0)

137.0 x 7.6 x 30.5 (54.0 x 3.0 x 12.0)

213.1 x 12.1 x 15.2 (84.0 x 4.75 x 6.0)

ShippingWeight kg (lb)

15.9 (35.0)

4.5 (10.0)

10.2 (22.5)

9.1 (20.0)

FDF-IBU-7-1

ZA-1653

Inter-bay Storage Unit (UDF-IBU-7-1) | Drawing ZA-1653


P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G




ZA-1538

Top Jumper TroughECL-T2U-19

UDF Standard Upper Trough | Drawing ZA-1538

Frame Components Jumper Troughs and Jumper Trough BridgesJumper troughs organize and protect jumpers routed on the front of the frame and also allow jumper routing from one side of the rack to the other. Jumper troughs are also used for express routing of jumpers through the bay to adjacent bays and are available in a variety of sizes. Jumper trough bridges provide increased sup-port between bays.

Description

UDF Upper Trough for 23-in, platinum

UDF Upper Trough for 19-in, platinum

UDF Standard Trough for 23-in, platinum

UDF Standard Trough for 19-in, platinum

Part Number

Jumper Troughs and Jumper Trough Bridges

UDF-JT-23T

UDF-JT-19T

UDF-JT-23B

UDF-JT-19B


10 x 65.5 x 12.7 (3.97 x 25.81 x 5.00)

10 x 55.4 x 12.7 (3.97 x 21.81 x 5.00)

10 x 65.5 x 12.7 (3.47 x 25.81 x 5.00)

10 x 55.4 x 12.7 (3.47 x 21.81 x 5.00)

ZA-2848

UDF Standard Upper Trough

UDF-IT-19T-35

UDF Standard Trough | Drawing ZA-2848




|

P

RET

ERM

INAT

ED S

YSTE

MS

|

C

ABLE

S

|

CO

NN

ECTO

RS

|

C

ABLE

ASS

EMBL

IES

|

HAR

DW

ARE

|

C

OPP

ER C

ON

NEC

TIVI

TY

|

SPL

ICE

AND

TES

T EQ

UIP

MEN

T

|

TRAI

NIN

G

|

installation information |For further details on how to install Corning Cable Systems Enhanced Management Frame (EMF) products, please refer to the following Corning Cable Systems recommended procedures:

Part Number

SRP-003-542

SRP-003-580

SRP-003-599

SRP-003-612

SRP-003-613

SRP-003-622

SRP-003-634

SRP-003-635

SRP-003-636

SRP-000-267

SRP-000-262

SRP-000-263

SRP-000-264

SRP-000-787

SRP-003-891

Description

Enhanced Management Frame (EMF) – Frame Installation

EMF Housing Installation Guide, Jumper Management and Mainenance

EMF Jumper Routing Procedures

EMF Accessories

IBU Bridging EMF and Fiber Manager Frame

CCF Frame Extensions for EMF

End Cap for EMF

End Guard for EMF

EMF Door Installation

Installation for Inter-Bay Storage Unit - EMF to UDF

EMF Trough Edge Guard Installation

EMF WATERFALL Installation

EMF Rear Trough Retainer Kit Installation

EMF CWDM/MUX & DEMUX Module Installation

EMF Housings with MTP® Connectors





notes |

Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystemsCorning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. ALTOS, FREEDM, MIC, Pretium EDGE, SearchLite and TBII are registered trademarks of Corning Cable System Brands, Inc. FiberManager, LSZH and SST-Ribbon are trademarks of Corning Cable Systems Brands, Inc. Corning is a registered trademark of Corning Incorporated. MTP is a registered trademark of USConec, Ltd. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2009, 2012 Corning Cable Systems. All rights reserved. Published in the USA.. EVO-278-EN / March 2012

Documents

Enhanced Management Frame (EMF) COPPER CONNECTIVITY