8/14/2019 Eng'ng-HVAC Checklist.xls
1/3
AX324 - Engineering HVAC Cheklist
PLANT ROOM/SUBSTATION No._________________________
Shop Drawing No._____________________________________
ENGINEER'S NAME:____________________________________
START DATE:_________________________________________
a) GENERAL:
No. QUERY REPLY
1 Is the drawing first issue of re-submittal?
2 If re-submittal, has previous revisions been
commented/coded?
3 If yes to above, have you read and seen commented
drawings?
4 Name of Electrical Engineer assigned to Plant Room:
5 If first submission, what is the number of Contract Issue
Drawing?
(including revision)
6 What is the single line diagram used as reference?
7 Have you got a copy of Architectural Layout with beams
overlaid and site
measurements of levels on?
8 Have any drawings been produced for areas outside the Plant
Room?
9 If yes, can you co-ordinate the services at entry and exit to
Plant Room?
10 If no to above, have you resolved the problem with Engineer
responsible
for area outside Plant Room? (attach any relating
documentation).
11 If no, contact your Manager.
Manager's Signature:____________________
Date:_______________
12 Is there any issues that require an SCR to be raised?13 If
yes, attach the relevant Documentation.
14 Have the SCR been answered?
15 If yes, can you incorporate answer/reply?
16 If no to above, contact your Manager.
Manager's Signature:____________________
Date:_______________
17 If no to Point No.14, then area clouded and noted refering to
SCR.
b.1) EQUIPMENT: SILENCE ATTENUATORS
No. QUERY REPLY
1 Have any been selected?
2 If no, attach relevant documents to support size
indicated.
3 Can all attenuators be accommodated in Plant Room?
4 If no, attach Documentation to HVAC Engineer responsible for
area outside
the Plant Room so that he can accomodate it.
187801033.xls.ms_office_11/12/2013 Page 1 of 3
8/14/2019 Eng'ng-HVAC Checklist.xls
3/3
AX324 - Engineering HVAC Cheklist
b.5) EQUIPMENT: FANS (Fresh Air, Extract, Smoke Extract)
No. QUERY REPLY
1 Have these been selected?
2 If no, attach Documentation supporting sizes used.
3 Can soung attenuators be fitted?
4 Have sound attenuators been selected?
5 Attach Documentation supporting sizes used.
b.6) EQUIPMENT: FCU's
No. QUERY REPLY
1 Have these been selected?
2 If no, attach Documentation supporting sizes used.
3 Attach document that states Handing Required and Transmittal
to C.E.D.
4 Are invert levels marked up on drawing?
Drawing commented by HMRT Eng'r.:_________________________
Date:_______________
Completion date & given to CAD for cadding ( f i rst
issue):_______________
Date returned from CAD for checking:_______________
Drawing commented alongside HMRT Eng'r.:____________________
Date:_______________
Date final commented drawing to CAD:_______________
HMRT signature..... Thermo signature.. JAM signature...
Date Sign-off:_______________
187801033.xls.ms_office_11/12/2013 Page 3 of 3
