Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
PART Sr.
No.Item Total cost
In figuers In words In figuers In words
1 Civil DSR - 2014 26,160,004
2 Electrical DSR - 2014 1,428,298
3 Plumbing DSR - 2014 715,634
PART - II 4 Non DSR work 16,254,543
TOTAL 44,558,479
% quote above/Below/At Par
PART - I
CONSTRUCTION OF STUDENT MESS AND RECREATION BLOCK AT NID PG CAMPUS AT GANDHINAGAR
QUOTING SHEET FOR BIDDERS
Bidders Price
Amount In Rs. After adding percentage above/below/at pat
ENGINEERING PROJECTS (INDIA) LTD.
(A GOVERNMENT OF INDIA ENTERPRISE)
GRAND TOTAL IN FIGURES
GRAND TOTAL IN WORDS
Signature of EPIL Signature of Bidder
PART Sr.
No.Item
Estimated
cost (in Rs.)
Cost Index
8%Total
Taxes 6.0%
(Service Tax
5.6% + SWC
0.2 % + KKS
0.2%)
TotalLabour
Cess 1%Total Cost
1 Civil DSR - 2014 22,624,907 1809993 24,434,900 1,466,094 25,900,994 259009.94 26,160,004.16
2Electrical DSR -
20141,235,286 98823 1,334,109 80,047 1,414,156 14141.56 1,428,297.56
3Plumbing DSR -
2014618,928 49514 668,442 40,107 708,549 7085.49 715,634.49
PART -
II4 Non DSR work 15182648.10 0 15,182,648 910,959 16,093,607 160936.07 16,254,543.17
44,558,479.38
PART -
I
CONSTRUCTION OF STUDENT MESS AND RECREATION BLOCK AT NID PG CAMPUS AT GANDHINAGAR
Summary
Signature of EPILSignature of Bidder
SUMMARY DSR WORKS Amount
Earth Works 972,691
Concrete Works 1,754,311
RCC Works 6,706,433
Brick Work 1,396,486
Marble/Granite Works 111,160
Wood & PVC Works 224,854
Flooring Works 2,630,219
Finishing Works 1,501,721
Aluminium Works 469,053
Water Proofing Works 226,679
R/F Steel 6,631,303
Total Civil Works 22,624,907
ELECTRICAL WORKS 1,235,286
PLUMBING & SANITARY 618,928
TOTAL CIVIL, ELECTRICAL, PLUMBING24,479,121
Construction of Student Mess and Recreation Block at NID PG
Campus at Gandhinagar
Signature of EPIL Signature of Bidder
RCC Framed Structure, G+1
1075 sq.mts.
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
2.000 EARTH WORK
2.600 Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means over areas (exceeding 30 cm in
depth 1.5 m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead up to 50m and lift up to 1.5
m disposed earth to be leveled and neatly dressed.
1.0 2.6.1 All kinds of soil cum 1598 155.60 248,571
2.260 Extra for every additional lift of 1.5 m or part thereof in
2.0 2.26.1 All kinds of soil (1.5 mt to 3.0 mt) cum 1598 46.25 73,884
3.0 2.250 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc.in layers not
exceeding 20 cm in depth, consolidating each deposited layer
by ramming and watering, lead up to 50 m and lift up to 1.5
m.
cum 2552 112.40 286,793
4.0 2.340 Supplying chemical emulsion in sealed containers including
delivery as specified.
2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 1200 185.95 223,140
5.0 2.35.3 Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart including
drilling 12 mm diameter holes and plugging with cement
mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing
floor :
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
Sqm 1180 118.90 140,302
SUB TOTAL 972,691
4.000 CONCRETE WORK
Providing and Laying in position cement concrete of
specified grade excluding the cost of centring and shuttering
– All work upto plinth level.
6.0 4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size)
cum 148 5466.30 806,279
7.0 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40
mm nominal size)
cum 212 4301.15 910,923
0
8.0 4.170 Making plinth protection 50 mm thick of cement concrete
1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20
mm nominal size) over 75mm thick bed of dry brick ballast
40 mm nominal size, well rammed and consolidated and
grouted with fine sand, including finishing the top smooth.
Sqm 89 419.30 37,108
SUB TOTAL 1,754,311
5.000 REINFORCED CEMENT CONCRETE WORK
5.9 Centring and shuttering including strutting, propping etc. and
removal of form for:
9.0 5.9.1 Foundations, footings, bases of column etc. for mass
concrete.
Sqm 55 196.45 10,824.40
Client : NATIONAL INSTITUTE OF DESIGN
Architect: R T & ASSOCIATES PVT LTD.
PART - I BOQ for CIVIL WORKS, ELECTRICAL WORKS and PLUMBING WORKS based on DSR -2014
Executing Agency: Engineering Projects India Ltd. (EPIL)
Project Name:
Type of
Total Built-up
Construction of Student Mess and Recreation Block at NID PG Campus at Gandhinagar
Signature of EPIL 4 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
5.9.3 Suspended floors, roofs, landings, balconies and access
platform
Sqm 693 401.65 278,390.29
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
Sqm 445 332.15 147,779.90
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 136 453.35 61,558.69
10.0 5.370 Providing and laying in position ready mixed M-25 grade
concrete for reinforced cement concrete work, using cement
content as per approved design mix, manufactured in fully
automatic batching plant and transported to site of work in
transit mixer for all leads, having continuous agitated mixer,
manufactured as per mix design of specified grade for
reinforced cement concrete work, including pumping of
R.M.C. from transit mixer to site of laying , excluding the
cost of centering, shuttering finishing and reinforcement,
including cost of admixtures in recommended proportions as
per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and
durability as per direction of the Engineer - in - charge.
(Note :- Cement content considered in this item is @ 330
kg/cum. Excess/less cement used as per design mix is
payable/recoverable separately).
11.0 5.37.1 All Works up to Plinth Level cum 432 6644.60 2,868,286
12.0 5.37.2 All Works above Plinth Level upto Floor V Level cum 454 7363.00 3,339,593
SUB TOTAL 6,706,433
6.000 BRICK WORK
6.400 Brick work with common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 in superstructure above plinth
level up to floor I level in all shapes and sizes in :
13.0 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 250 5426.15 1,356,538
14.0 6.130 Half brick masonry with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in superstructure
above plinth level up to floor I level.
15.0 6.13.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 60 665.80 39,948
SUB TOTAL 1,396,486
Signature of EPIL 5 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
8.000 MARBLE GRANITE WORKS
8.200 Providing and fixing 18 mm thick gang saw cut, mirror
polished, premoulded and prepolished, machine cut for
kitchen platforms, vanity counters, window sills , facias and
similar locations of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar 1:4 (1
cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including
rubbing, curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels.
8.2.2 Granite of any colour and shade
8.2.2 Granite of any colour and shade
16.0 8.2.2.2 Area of slab over 0.50 sqm sqm 25 3907.40 97,685
8.300 Providing edge moulding to 18mm thick marble stone
counters,Vanities etc. Inbcluding machine polishing to edge
to give high gloss finish etc. complete as per design
approved by Engineer-in-Charge
17.0 8.3.2 Granite work metre 40 230.55 9,222
18.0 8.500 Extra for providing opening of required size & shape for
wash basins/kitchen sink in kitchen platform, vanity counters
and similar location in marble/stone work including
necessary holes for pillar taps etc .including rubbing and
polishing of cut edges etc. complete.
each 11 386.60 4,253
SUB TOTAL 111,160
9.000 WOOD AND PVC WORK
Room Doors
19.0 9.200 Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) decorative type, core of
block board construction with frame of 1st class hard wood
and well matched teak 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters.
20.0 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws.
sqm 75 2606.45 195,484
21.0 9.240 Extra for providing vision panel not exceeding 0.1 sqm in all
type of flush doors (cost of glass excluded) (overall area of
door shutter to be measured):
9.24.1 Rectangular or square sqm 18 139.40 2,509
22.0 9.530 Providing 40x5 mm flat iron hold fast 40 cm long including
fixing to frame with 10 mm diameter bolts, nuts and wooden
plugs and embeddings in cement concrete block
30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size)
each 81 117.35 9,505
23.0 9.970 Providing and fixing aluminium tower bolts, ISI marked,
anodised (anodic coating not less than grade 10 as per
IS:1868), transparent or dyed to required colour or shade,
with nuts and screws etc. complete
9.97.2 250x10 mm each 28 95.25 2,667
24.0 9.101 Providing and fixing aluminium hanging type floor door
stopper (anodic coating not less than grade 10 as per
IS:1868), transparent or dyed to required colour or shade,
with nuts and screws etc. complete
each 18 37.50 675
9.101.1 Single rubber stopper
25.0 9.840 Providing and fixing aluminium extruded section body
tubular type universal hydraulic door closer (having brand
logo with ISI, IS : 3564, embossed on the body, door weight
upto 36 kg to 80 kg and door width from 701 mm to 1000
mm), with double speed adjustment with necessary
accessories and screws etc. complete.
each 9 753.75 6,784
Signature of EPIL 6 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
26.0 9.96 Providing and fixing aluminium sliding door bolts ISI
marked anodised anodic coating not less than grade AC 10 as
per IS:1868) transparent or dyed to required colour or shade,
with nuts and screws, etc. complete
9.96.2 250x16 each 19 189.00 3,591
Wooden frames-Toilet (Internal Doors)
9.100 Providing woodwork in frames of doors, windows,
clerestory windows and other frames, wrought framed and
fixed in position and hold fast lugs or with dash fasteners of
requiired dia & length (hold fast and lugs shall be paid
seperately)
27.0 9.1.2 Sal wood (Toilet Internal doors) cum 0.03 75558.60 2,267
Wooden frames-(All other Doors)
28.0 9.1.1 Providing woodwork in frames of doors, windows,
clerestory windows and other frames, wrought framed and
fixed in position and hold fast lugs or with dash fasteners of
required dia & length (hold fast and lugs shall be paid
seperately) (Second class teak wood)
cum 0.02 91496.00 1,372
SUB TOTAL 224,854
11.000 FLOORING
11.260 Kota stone flooring over 20 mm (average) thick base laid
over and jointed with grey cement slurry mixed with pigment
to match the shade of the slab including rubbing and
polishing complete with base of 1:4 (1 cement : 4 coarse
sand)
29.0 11.26.1 25 mm thick sqm 1100 1141.40 1,255,540
30.0 8.600 Mirror polishing on marble work/granite work/stone work
wherever required to give high gloss finish
sqm 1100 212.85 234,135
31.0 11.270 Kota stone slabs 20 mm thick in risers of steps, skirting,
dado and pillars laid on 12 mm (average) thick cement
mortar 1:3 (1 cement 3 coarse sand) and jointed with grey
cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
sqm 165 1191.25 196,556
32.0 8.600 Mirror polishing on marble work/granite work/stone work
wherever required to give high gloss finish
sqm 165 212.85 35,120
33.0 11.430 Fixing glazed/ Ceramic / Vitrified floor tiles with cement
based high polymer modified quick-set tile adhesive ( Water
based ) conforming to IS : 15477, Adhesive per sqm of tile
area, in average 3mm thickness.
sqm 350 432.85 151,498
34.0 11.470 Providing and laying Vitrified tiles in different sizes
(thickness to be specified by the manufacturer), with water
absorption less than 0.08% and conforming to IS: 15622, of
approved brand & manufacturer, in all colours and shade, in
skirting, riser of steps, laid with cement based high polymer
modified quick set tile adhesive (water based) conforming to
IS: 15477, in average 6 mm thickness, including grouting of
joints (Payment for grouting of joints to be made separately).
35.0 11.47.2 Size of Tile 60x60 cm sqm 350 1630.20 570,570
Signature of EPIL 7 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
36.0 11.44 Crazy ceramic tile flooring, with under layer 12 mm thick
cement mortar
1:4 (1 cement: 4 coarse sand), with joints not exceeding 5
mm, including
filling the gaps with ordinary cement mixture & mixing with
synthetic
polyester fibre, triangular in shape having specific gravity of
1.34 to 1.40,
cross section size ranging from 10 to 40 micron & length
upto 6 mm ,
mixing fibre @ 125 grams per 50 kg of cement in cement
mortar, including
providing and mixing water proofing material in mortar @ 1
kg per 50 kg
of cement , all complete as per direction of Engineer-in-
charge.
sqm 400 467 186,800
SUB TOTAL 2,630,219
13.000 FINISHING WORK
Cement Plaster in Two Coats (Internal Walls)
37.0 13.130 12 mm cement plaster 1:2 (1 cement:2 stone dust) sqm 5000 200.15 1,000,750
(Internal Walls)
13.4 12mm cement plaster of mix:
13.4.1 1 : 4 (1 Cement : 4 coarse sand) sqm 650 172.30 111,995
(External Walls)
38.0 13.370 Whitewashing with lime to give an even shade
13.37.1 New work (two or more coats) sq.mts 5000 16.20 81,000
39.0
13.46
Finishing walls with Acrylic Smooth exterior paint of
required shade :
13.46.1
New work (Two or more coat applied @ 1.67 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20
kg/ 10 sqm)
sq.mts 650 90.00 58,500
40.0
13.72
Washed stone grit plaster on exterior walls height upto 10
metre above ground level, in two layers, under layer 12 mm
cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the
under layer with scratching tool, applying cement slurry on
the under layer @ 2 Kg of cement per square metre, top layer
15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2
stone chipping 10 mm nominal size), in panels with groove
all around as per approved pattern, including scrubbing and
washing the top
layer with brushes and water to expose the stone chippings
,complete as per specification and direction of Engineer-in-
charge (payment for provoding grooves shall be made
separately).
sq.mts 442 553.45 244,736
13.73
Forming groove of uniform size in the top layer of washed
stone grit plaster as per approved pattern using wooden
battens, nailed to the under layer,
including removal of wooden battens, repair to the edges of
panels and finishing the groove complete as per
specifications and direction of the
Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove metre 150 31.60 4,740
SUB TOTAL 1,501,721
Signature of EPIL 8 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
41.0 21.000 ALUMINIUM WORK
21.100 Providing and fixing aluminium work for doors, windows,
ventilators and partitions with extruded built up standard
tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS: 1285, fixing
with dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at top, bottom
and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-
charge. (Glazing, paneling and dash fasteners to be paid for
separately) :
21.1.2 For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision for
fixing of fittings wherever required including the cost of
EPDM rubber / neoprene gasket required (Fittings shall be
paid for separately)
21.1.2.2 Powder coated aluminium (minimum thickness of powder
coating 50 micron)
Kg 450 435.75 196,088
42.0 21.300 Providing and fixing glazing in aluminium door, window,
ventilator shutters and partitions etc. with EPDM rubber /
neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge. (Cost of
aluminium snap beading shall be paid in basic item):
21.3.2 With float glass panes of 5.50 mm thickness sqm 200 1054.20 210,840
43.0 21.800 Filling the gap in between aluminium frame & adjacent
RCC/ Brick/ Stone work by providing weather silicon sealant
over backer rod of approved quality
as per architectural drawings and direction of Engineer-in-
charge complete.
21.8.1 Upto 5mm depth and 5 mm width metre 700 88.75 62,125
SUB TOTAL 469,053
22.000 WATER PROOFING WORK
22.300 Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen
and the like consisting
of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with
water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3
coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen
applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at
joints of PVC sheet should be 100 mm wide and pasted to
each
other with bitumen @ 1.7 kg/sqm).
44.0 The rate includes preparation of surface, treatment and
sealing of all joints, corners, junctions of pipes and masonry
with polymer mixed slurry.
sqm 45 522.90 23,531
Signature of EPIL 9 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
45.0 22.700 Providing and laying integral cement based water proofing
treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations: a) Applying a slurry coat of neat
cement using 2.75 kg/sqm admixed with water proofing
compound conforming to IS : 2645 and approved by
Engineer-in-charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing
the surface with trowel with neat cement slurry and making
pattern of 300x300 mm square 3 mm deep. e) The whole
terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test.
All above operations to be done in order and as directed and
specified by the Engineer-in-Charge :
46.0 22.170 Providing and laying in situr seven course water proofing
treatmen with APP (Atactic Polypropylene) modified
Polymeric membrane over roof consisiting of first coat of
bitument primer @0.40 kg per sq.mt, wnd, 4th and 6th
courses of bonding material @1.20kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to
IS:702, 3rd and 5th layers of roofing membrance APP
modified Polymeric membrane 2.0 mm thick of 3.00
kg/sq.mt weight consisting of five layers prefabricated with
centre core as 100 micron HMHDPE film sandwiched on
both sides with polymeric mix and the polymeric mix and the
polymeric mix is protected on both side with 20 micron
HMHDPE film. 7th the top most layer shall be finished with
brick tiles of class designation 10 grouted with cemen mortar
1:3 (1 cement:3 fine sand) mixed with 2 per cent integral
water proofing compound by weight of cemen over a 12 mm
layer of cemen mortar 1:3 (1 cement:3 fine sand) and
finished neat (item of laying brick tiles shall be papid for
separately)
Sqm 355 572.25 203,149
SUB TOTAL 226,679
STEEL REINFORCEMENT
5.220 Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars Kg. 47484 68.10 3,233,653
5.22A Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
complete above plinth level.
47.0 5.22A.6 Thermo-Mechanically Treated bars Kg. 49892 68.10 3,397,649
SUB TOTAL 6,631,303
CIVIL WORKS TOTAL 22,624,907
Signature of EPIL 10 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
ELECTRICAL BOQs
POINT WIRING
48.0
1.2.1
Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multistrand copper wires, in following
type of pipe to be erected concealed in/ on surface on
wall/ceiling complete with 6A Modular type switch / bell
push & accessories and earth continuity of following type,
erected on PVC / Metallic box, single mounting base frame
covered with textured/metallic front plate modules erected on
/ in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories
Cat. III Pt. 200 420.00 84,000
49.0
1.2.2
Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS
PVC insulated multistrand copper wires, in following type of
pipe to be erected concealed in / flushed on wall/ceiling
complete with 6A Modular type switch and hum free EME
four or more step type electronic fan regulator with
separately mounted and accessories with earth continuity of
following type erected on PVC / Metallic box, single
mounting base frame covered with textured/metallic front
plate modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector as
directed.
(a) with medium class Rigid PVC pipe and accessories
50.0 Cat. III Pt. 30 600.00 18,000
1.2.3
Point wiring for Individual Plug with & earthwire of 1.5
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multistrand copper wires, in following type of
to be erected concealed in / on surface of wall / ceiling
complete with Modular type switch & 5 pin Plug erected on
PVC / Metallic box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe erected with
following type of accessories.
51.0 [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire
(a) with medium class Rigid PVC pipe and accessories
Cat. III Pt. 10 445.00 4,450
52.0 [III] For 16A Plug with 2-4 sq.mm Cu. Wire
(a) with medium class Rigid PVC pipe and accessories
Cat. III Pt. 50 670.00 33,500
53.0
1.2.4
Point wiring for Looped Plug with 6A Modular type switch
& 5 pin socket erected on PVC / Metallic box, single
mounting base frame covered with textured / metallic front
plate modules erected on / in wall / ceiling with following
type accessories
Cat. III Pt. 20 240.00 4,800
Signature of EPIL 11 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
54.0
1.3.2
Providing and erecting ISI mark Medium class RIGID PVC
PIPES of following size complete to be erected on/in wall or
ceiling erected with necessary PVC fittings & Junction
boxes fixed with adhesive solution & Clamps with following
dia of pipes, in approved manner as directed
(a) 20 mm Mtr. 20 23.00 460
(b) 25 mm Mtr. 700 32 22,400
(c) 32 mm Mtr. 20 53.00 1,060
(d) 40 mm Mtr. 20 67.00 1,340
55.0
1.4.1
Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to
be erected concealed in /flushed on wall/ceiling, with 1.5 sq.
mm copper conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size
(a) with medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm Mtr. 100 60.00 6,000
(b) 2 wire 2.5 sq. mm Mtr. 1,080 80.00 86,400
56.0
1.4.2
Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to
be erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour
for earth continuity of following size
(a) with medium class Rigid PVC pipe and accessories
(a) 2 wire 4 sq. mm Mtr. 200 110.00 22,000
(b) 2 wire 6 sq. mm Mtr. 50 145.00 7,250
SWITCH GEAR
57.0
3.10.1
Miniature circuit breaker single pole 6A to 32A suitable to
operate on 240 V A.C. system and having breaking capacity
10 KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Cat.III Ea. 84 115.00 9,660
Providing and erecting Sheet Steel powder coated MCB
distribution board - flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, confirming to IS
13032 and BS 5486-1986 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same company of
MCB to be used)
Three phase 6 way single door for single phase outgoing
horizontal box Ea. 2
115.00 230
Three phase 8 way single door for single phase outgoing
horizontal box Ea. 2
115.00 230
57.0
3.12.1
Approved make ELCBs / RCCBs conforming to IS: 12640
and having sensitivity of 30 mA and Short Circuit withstand
capacity of 6 KA and suitable for operation on single phase
240 V. having characteristic of quick action & tripping with
all advance feature & do not incorporate any electronic
component. for following Max. rating erected as directed
(i) 40Amps. DP
Cat. III Ea. 6 2610.00 15,660
(i) 63Amps. DP
Cat. III Ea. 6 2600.00 15,600
CABLES
58.0 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured
cable multistrand Copper conductor for 1.1 KV. to be laid
on wall with necessary clamps or in existing trench / pipe at
road crossing or floor of following size of cable.
4.4.2 (F) 3 core 4 Sq. mm Mtr. 50 180.00 9,000
4.4.2 (G) 3 core 6 Sq. mm Mtr. 50 280.00 14,000
4.4.4 (L) 4 core 6 Sq. mm Mtr. 50 350.00 17,500
4.4.4 (M) 4 core 10 Sq. mm Mtr. 100 550.00 55,000
4.4.4 (N) 4 core 16 Sq. mm Mtr. 100 870.00 87,000
Signature of EPIL 12 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
59.0
4.6.1
Providing and, fixing heavy duty flange type brass cable
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for
following size of cables.
(b) 2 to 4 core 4 Sq. mm Ea. 2 35.00 70
(c) 2 to 4 core 6 Sq. mm Ea. 4 40.00 160
(d) 2 to 4 core 10 Sq. mm Ea. 4 40.00 160
(d) 2 to 4 core 16 Sq. mm Ea. 4 50.00 200
60.0
4.7.2
Solderless crimping type Copper lugs conforming to IS
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
(A) 1.5/2.5 to 6 Sq.mm Ea. 6 8.00 48
(B) 10 Sq.mm Ea. 24 10.00 240
(C) 16 Sq.mm. Ea. 24 12.00 288
FANS
61.0 5.1.1 Providing and erecting Approved make Ceiling fan with
double ball bearing ISI mark with condenser A.C. 23OV.50
c/s.1200 mm. sweep complete, canopy and 30 cms. down rod
erected on existing hook or clamp with 24/0.2 , 3 core
flexible wire with earthing. [Make shall be approved by
Engineer in charge]
Each 30
1700.00 51000.00
LED LUMINAIRE
62.0
14.1
Supplying and erecting LED indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA polyester powder coated
and high U.V. & corrosion resistance with diffuser and/or
Polycarbonate optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD < 10 %,
CCT 4000 K to 6500K, Uniformity ratio >0.7,
Luminaire efficiency> 85 lumens/watt ,
LED driver efficiency > 85 %
CREE / OSRAM / PHILIPS Lumileds / NICHIA /
SEOUL/Bridgelux(U.S.A.) make LED used for luminaire.
(Each fitting required LM-79 & LM-80 Certificates)
(A) Tube Light with integral/ non-integral driver
(b) 16-18 Watts, Surge - 4KV,IP-20
Cat-lll Each 44 1430.00 62920.00
(C) Square/ Circular Surface/Recessed Mounted
Downlight with provision for spring loaded mounting
clips complete.
(b) 10-15 watts, Surge-4 KV Each
Cat-lll Each 10 2290.00 22900.00
© 20-24 watts, Surge-4 KV Each
Cat-lll Each 144 4040.00 581760.00
SUB TOTAL-ELECTRICAL 1,235,286
Signature of EPIL 13 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
Plumbing BOQs
COLD / HOT /DRINKING WATER SUPPLY:
INTERNAL/EXTERNAL WATER SUPPLY
WORK:- Providing,laying and jointing in true line
and level U.P.V.C pipe (SCH-40) of following dia.
Including fittings of standard make as approved by
engineer-in-charge. Pipe shall be fixed on the wall with
the help of clamp at every 2000 mm center to center or
shall be concealed as directed including necessary fittings
etc. testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
a) 15 mm
Rmt
82
85.00
6,970
b) 25 mm Rmt 65 102.00 6,630
c) 32 mm Rmt 70 135.00 9,450
d) 40 mm Rmt 60 169.00 10,140
E) 50 mm Rmt 0 217.00 0
Supplying & erecting resin bonded flap rock wool / glass
wool with conductivity value 1.67 sq.mm per watt & to
with stand the temp. to 100 degree centigrade C thickness
50mm with G I pipe of following size dia "B" class as
per IS:1239. The plastic sheet to be used as covering of
glass wool. Al. cladiy besides other materials like chicken
mesh, 26 G Al. Sheet shall be used for cladding the
insulation pipe.
[A] 20 mm NB pipe
Rmt
0
360.00
0
[B] 25 mm NB pipe Rmt 5 440.00 2,200
[C] 32 mm NB pipe Rmt 0 530.00 0
[D] 40 mm NB pipe Rmt 0 620.00 0
64.0
SOR
2013-14
Item No -
00
Providing and Laying & Jointing in true line level 110
diameter U.P.V.C (Type'B') conforming to IS13592-
1992 with one end plain and other end socketed with
rubber ring, and fittings conforming to ISI 14735-1999
of approved make for drinage system pipe line, pipe shall
be jointed with each other with rubber lubricant,pipe
shall be fixed on wall using of PVC clamp of the size 110
mm diametre x210 mm length x 196 mm height at
every 2000 mm center to center or shall be concealed in
walls as directed including testing of pipes and joints and
jointed with adhesive solvant cement including cost of all
materials.
(i) 110 mm Dia(DOWNTAKE FOR SOIL WATER
AND RAIN WATER)
Rmt 79 526.00
41,554
Providing & fixing in position cowl vent to pipes
a) 75 mm diaEach
3431.00
1,293
100 mm dia Each 3 584.00 1,752
66.0
SOR
2013-14
Item No -
23.87
Providing and fixing PVC SWR Nahni trap IS 14735
for drain - 100 mm diameter with jali of the following
nominal diameter of self cleansing design with C.I.
scread down or hinged grating including the cost of
cutting and making good the walls
Each
24
453.00
10,872
67.0
SOR
2013-14
Item No -
23.112
Providing and fixing wash down water closet
(European type, WC pan) with integral S trap
including jointing the trap with soil pipe in cement
mortar 1:1 (1 Cement : 1 fine sand) ( Seal and cover to be
measured and paid for separately) A) vitrious china
white colour
(Cera-2008B / Parryware-C0287 / Hindware-20011)
Each
7
1043.00
7,301
SOR
2013-14
Item No -
0.0
62.0
ELECTR
ICAL
SOR
2012-13
ITEM
NO.
8-11-8
63.0
SOR
2013-14
Item No -
0.0
65.0
Signature of EPIL 14 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
68.0
SOR
2013-14
Item No -
23.115
Providing and fixing 12.5 liters Low level flushing
cistern with a pair of CI or MS bracket complete with
fittings such as lead valve less syphon, 15 mm nominal
size brass valve with polythene float, CP brass handle
unions and coupling for connections, with inlet outlet and
overflow pipes, 40 mm dia porcelain enamelled flush
bend including cutting holes in walls and making good
the same connecting the flush bend with cistern and
closet (overflow pipe to be measured and paid for
separately)
(Cera-2603 / Parryware-C8190 / Hindware-21001)
Each
7
2437.00
17,059
69.0
SOR
2013-14
Item No -
23.121
Providing and fixing plastic seat and cover for wash
down water closet with C.P. brass hinges and rubber
buffers A) Black plastic seat and cover
(Cera-2308 / Parryware-C8071 / Hindware-20011)
Each
7
397.00
2,779
70.0
SOR
2013-14
Item No -
23.127
Providing and fixing wash basin with single hole for
pillar trap with CI or MS brackets painted white
including cutting holes and making good the same but
excluding fitting a) Vitreous china flat back
wash basin 550mm X 400mm size in white colour
(Cera-1008/ Parryware-C0477 / Hindware-)
Each
15
1058.00
15,870
71.0
SOR
2013-14
Item No -
23.134
Providing and fixing rubber plug for sink or wash
basin.Each
15
22.00
330
72.0
SOR
2013-14
Item No -
23.136
Providing and fixing M.I. fisher union for wash basin or
sink.
(A) 32 mm dia.Each
15
103.00
1,545
73.0
SOR
2013-14
Item No -
23.143
Providing and fixing 600mmX450mm bevelled edge
mirror of superior glass mounted on 6mm thick A.C.
sheet or plywood sheet and fixing to wooden plug with
C.P. brass screws and washers.
Each
15
690.00
10,350
74.0
SOR
2013-14
Item No -
23.146
Providing and fixing toilet paper holder
(A) C.P. Brass
(Cera- / Parryware- / Hindware)Each
7
456.00
3,192
75.0
SOR
2013-14
Item No -
23.122
Providing and Fixing Urinal of approved quality
including connecting the Urinal with waste pipe, tap etc.
completed.
[A] White earthenware flat back or corner type size
430mmX 260mm X 350mm
(Cera-5001 / Parryware-C0501 / Hindware-60005)
Each
4
783.00
3,132
76.0
SOR
2013-14
Item No -
0.0
Providing erecting and fixing double coated sintex or
equivalent PVC.(ISI) water tank of required capacity
each with all necessary fittings and connection etc.
complete on terrace.
Liter
10000
4.60
46,000
77.0
SOR
2013-14
Item No -
0.0
Providing and fixing ball cock of approved quality as
directed
(I)40 mm dia
Each
2
261.00
522
78.0
SOR
2013-14
Item No -
0.0
Providing and fixing ball cock of approved quality as
directed
(II)32 mm dia
Each
6
261.00
1,566
79.0
SOR
2013-14
Item No -
0.0
Providing and fixing ball cock of approved quality as
directed
(III)25 mm dia
Each
8
261.00
2,088
Signature of EPIL 15 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
80.0
Providing and Laying & Jointing in true line level
Following diameter U.P.V.C (Type'B') conforming to
IS13592-1992 with one end plain and other end socketed
with rubber ring, and fittings conforming to ISI 14735-
1999 of approved make for drinage system pipe line, pipe
shall be jointed with each other with rubber
lubricant,pipe shall be fixed on wall using of PVC clamp
of the size 160 mm diametre x210 mm length x 196
mm height at every 2000 mm center to center or shall
be concealed in walls as directed including testing of
pipes and joints and jointed with adhesive solvant cement
including cost of all materials.
(i) 110 mm dia.
Rmt
40
526.00
21,040
[ii] 160 mmDia. Rmt 50 948.00 47,400
Providing and laying Cement concrete 1:5:10 (1-Cement
: 5 - fine sand : 10-Graded stone aggregate 40mm
nominal size) bedding for stoneware pipes of following
internal diameters with necessary formwork and curing
complete.
[A] 100mm dia. (112 mm Ave. bed thickness)
Rmt
40
118.00
4,720
[B] 150mm dia. (166mm Ave. bed thickness) Rmt 50 199.00 9,950
81.0
SOR
2013-14
Item No -
24.19
Providing and fixing S.W. gully trap with C.I. grating
brick masonry chamber and water tight C.I. cover with
frame of 300mmX300mm size (inside) with standard
weight. I) Square mouth traps.
a) 100mmX100mm size P type
Each
4
1432.00
5,728
Constructing Manhole with R.C.C. top slab in 1:2:4 mix
(1-cement : 2-coarse send : 4-graded stone aggregate
20mm nominal size) foundation concrete 1:3:6 mix (1-
cement : 3-coarse sand : 6- Brick bats 40 + 50mm size)
inside plastering 15mm thick with Cement a) With
230mm thick walls of brick masonary using brick having
crushing strength not less than 35Kg. / Sq.cm. in Cement
Mortar 1:5 (1- Cement : 5- Coarse sand) (I) Inside
size 900mm X 1200mm and 1.5M. deep including C.I.
cover with frame size 560mm diameter total weight of
cover and frame to be not less than 128 kgs. (Wt. of
cover 64 kg. and Wt. of frame 64 Kg.)
1) A type depth 0.90 Meter for 150 mm diameter sewer.
Each
4
11609.00
46,436
2) B type depth 1.5 Meter for 150 mm diameter sewer.Each
120019.00
20,019
3) B type depth 2.24 Meter for 150 mm diameter sewer.Each
023518.00
0
Providing & Laying ( to level or Slope) and jointing
reinforced concrete Light Duty NoN Pressure I.S. Class
NP2 of the following internal diameter with collars and
butt ends prepared for collar joints including testing of
joints for
[B]250 mm dia
Rmt
10
414.00
4,140
[C]300 mm dia Rmt 0 523.00 0
SOR
2013-14
Item No -
0.0
SOR
2013-14
Item No -
24..2
SOR
2013-14
Item No -
24.27
SOR
2013-14
Item No -
24.22
83.0
82.0
Signature of EPIL 16 Signature of Bidder
SR.
NO.
DSR
2014
ITEM
NO.
DESCRIPTION UNIT QTY RATE AMOUNT
84.0ELECTR
ICAL
SOR
2012-13
ITEM
NO.
9-4-2 (F)
For 5 HP 3 phase open well horizontal mono block
pump set suitable for 150 LPM to 500 LPM @ 15 to 30
Mtr head. CAT-II (1W +1S) with necessary valve
fittings.
Each 1 54650.00 54,650
85.0
ELECTR
ICAL
SOR
2012-13
ITEM
NO.
9-5-6 (B)
Supplying and erecting approved make3 phase motor
control panel (ATS) made from 16 G. CRCA sheet
duly painted with epoxy power paint inside and outside
with hinged doors and locking arrangement, consisting,
of suitable switch of AC 23 duty with HRC fuses
(Cat.III), starting and running contactors, overload relay,
Automatic water level controller, Electronic timer with
master timer CT operated Ammeter with selector switch,
Voltmeter with selector switch, phase indicating lamps,
single phasing preventer , water level guard, over load,
start, run and stop push buttons, air cooled auto
transformer with 60%, 70%, 80% tapping, Panel to be
erected on angle iron frame grouted on wall as directed.,
contactors relays, timer etc. shall be of L & T Siemens /
Cutler Hammer make.
(b) Suitable for 5 H.P.
Each
1 40250.00 40,250
ELECTR
ICAL
SOR
2012-13
ITEM
NO.
8-8-2
Providing & erecting water cooler having storage
capacity 150 Ltr. & cooling capacity 80 Ltr.per hour @
an ambient temp of 45 deg C. The outlet temp. of the
water should drop by 15 deg C within a hour, The water
cooler should be comprising of hermetically sealed
compressor, fan motor, condensing unit, water tank
surrounded by evaporating, coil, thermostats, relay
etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless
Steel.
Each 2
54000.00 108,000
86.0
ELECTR
ICAL
SOR
2012-13
ITEM
NO.
8-8-6
Supplying & erecting 5 stage single reverse
osmosis(R.O.) water purification system with M.S.
powder coated frame, prefilter housing with 'O' ring
presediment filter GAC filter, carbon filter suitable buster
DC pump capacity 80 psi, mention with 40 Osg inline
type post carbon filter auto low & high pressure switches
with following size of storage tank & LPH capacity &
erected as directed with one year comprehensive
maintenance guarantee.
[C] 50 Ltr / Hr with 250 psi 2 nos booster pump
Each 2 27000.00 54,000
SUB TOTAL-PLUMBING 618,928
GRAND TOTAL-PART-II (ALL DSR ITEMS) 24,479,121.22
Signature of EPIL 17 Signature of Bidder
Sr. No. Summary NON DSR Works Amount
1 Exposed Concrete Work 178,750.00
2 Miscelleneous Work 873,800.00
3 Furniture Work 1,700,153.10
4 Gym Equipments 860,250.00
5 Elevator 2,000,000.00
6 CCTV Works 75,000.00
7 Electrical Work 173,160
8 Plumbing Work 125,149
9 Air Conditioning 3,200,000
10 Kitchen Equipments 1,500,000
11 LED TVs 197,700
12 MUSIC SYSTEM 359,700
13 Fire Fighting 2,563,986
14 Demolition and Dismantling 825,000
15 Shifting of Existing Kitchen 200,000
16 Shifting Khopcha Building 100,000
17 Shifting of Painting Workshop 250,000
TOTAL 15,182,648.10
Construction of Student Mess and Recreation Block at NID PG Campus
at Gandhinagar
Signature of EPIL Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
1.0 EXPOSED CONCRETE WORK
FORMWORK
1.1 Walls (any thickness) including attached pilasters, buttresses, plinth
and string courses etc.
Sqm 245 650.00 159,250.00
1.2 Suspended floors, roofs, landings, balconies and access platform. Sqm 0 650.00 0.00
1.3 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 0 650.00 0.00
1.4 Columns, Pillars, Piers, Piers, Abutments, Posts and Struts. Sqm 0 650.00 0.00
1.5 Stairs (excluding landings) except spiral stair-cases Sqm 30 650.00 19,500.00
1.6 Edges of slabs and breaks in floors and walls.
Below 20 cm wide rmt 130.00 0.00
SUB-TOTAL 178,750.00
2.0 MISCELLENEOUS
2.1 MOSQUITO SCREEN FOR WINDOWS
Fixing sliding mosquito nets with aluminium section frames 2.5mm
thick and Saint Gobain or equivalent fiber net with roller mechanism
for all windows and ventilators
sqm 200 2250.00 450,000.00
2.2 Anodised aluminium fixed louvered screens for the duct shafts
Aluminum plain panels with finish of powder coating on the visible
surface of approved colour and supporting structure black colour spray
painted (Supersil or equivalent make)
sqm 53 2200.00 116,600.00
2.3 FLUSH DOORS (FOR TOILET)
30mm thick pine frame pine filler doors
PF bonded resin waterproof ISI brand with 1.00 mm thick super gloss
laminate on both sides and teak wood borders on the shutters on all
four sides
each 10 2400 24,000.00
2.4 Supplying and filling in plinth with river sand under floors, including
watering, ramming, consolidating and dressing complete.
cum 354 800.00 283,200
TOTAL 873,800.00
3.0 FURNITURE
Supplying and Placing canteen table of -Size: 800mm*800mm*25mm
thick Made of 25mm thick MDF. PU coating done on both top and
bottom surfaces. PU coating has a hardness of 3H. Top is fitted to the
under-structure with with No.8 X 16 Philip head screw The under-
structure is fold-able and stack-able, made with combination of
Aluminum and Plastic. Center column is of Aluminum extrusion of
diameter 70mm, which is anodized. Base is made in 2 pieces of die
cast aluminum with buffed finish. It is bolted together with the center
column and top flange. Approved Make: Godrej / Herman Miller /
Haworth / Knoll/Wipro
Each 54.00 14,746.45 796,308.30
Client : NATIONAL INSTITUTE OF DESIGN
Executing Agency: Engineering Projects India Ltd. (EPIL)
Architect: R T & ASSOCIATES PVT LTD.
Project Name: Construction of Student Mess and Recreation Block at NID PG Campus at Gandhinagar
PART-II-BOQ FOR CIVIL WORK, ELECTRICAL, PLUMBING AND SPECIALISED E&M WORK (NON-DSR ITEMS)
Signature of EPIL 19 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
Supplying and Placing Desk let Chair – The seat back Shell is made of
1.2 +/- 0.1 cm, thick hot pressed plywood and laminated with natural
Veneer. Back Size – 42.0 cm (W) X 45.0 cm (H) and Seat Size – 44.0
cm (W) X 40.0 cm (D). Over all size of chair to be 51.5 cm W, 54 cm
D, 86 cm H and 45.5 cm Seat Height.Tubular understructure made of
MS Tube 1.9+/- .02 cm X 0.16 cm +/- 0.0128 cm thk. And black
powder coated DFT 40-60 microns. Approved Make: Godrej / Herman
Miller / Haworth / Knoll/Wipro
Each 186.00 3,858.25 717,634.50
Providing and fixing three seater sofa W 2055mm X D 920mm X H
820mm and seating H 450mm made from PU foam with density 32 +/-
2 kg /cu. Mtrs having an additional top layer of PU with density 28 +/-
2 kg /cu. Mtrs. Back made of PU foam with density 28+/- 2 kg /cu.
Mtrs having an additional top layer of PU with density 23 +/- 2 kg /cu.
Mtrs. Understure made of 1.2+/- 0.1 cm thick hot pressed plywood,
dia 4 mm Zigzag spring assembly is mounted in understructure for
support and additional cushioning purpose. Legs made in SS grade
202 tube and palte. Approved Make: Godrej / Herman Miller /
Haworth / Knoll
Each 4.00 41,400.00 165,600.00
Supplying and placing Center Table Provinding Center Table 1120mm
W 600m D and 351cm H Center tabel glass to be 12mm thick black
tinted Toughened Glass UV glued with bushes made in SS 202 Grade
fro fixing with understructure. Understructure welded Assembly made
in SS 202 grade having DIA 12 mm +/-0.04mm as per IS 1762
Approved Make: Godrej / Herman Miller / Haworth / Knoll/Wipro
Each 2.00 10,305.15 20,610.30
Total of furniture 1,700,153.10
4.0 GYM EQUIPMENTS
Heavy Commercial Treadmill (4 HP AC CONTINUS Motor) and (8
HP AC Peak Motor)
Each 4.00 110,000.00 440,000.00
Cross Trainers (Commercial) Each 1 80000 80,000.00
4-Station Multi Gym Each 1 95000 95,000.00
Dumb Bells Stand Each 1 24000 24,000.00
Adjustible abdominal bench Each 1 22000 22,000.00
Rubber coated dumbells Kg 300 110 33,000.00
4mm rubber mat smt 65 1250 81,250.00
10mm rubber mat smt 10 8500 85,000.00
Total of gym equipments 860,250.00
5.0 ELEVATORS
Machine room less 6 passenger elevator with 408 kg capacity and
1.00m/s speed (Otis or equivalent)
each
1 2000000 2,000,000.00
6.0 CCTV
Supplying, testing, installation and commissioning of IP based CCTV
system for building security comprising of PTZ, fixed camera, cabling,
recording, display system and hardware and software support
Including one Computer at Reception
LS
75,000.00
Signature of EPIL 20 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
7.0 ELECTRICAL WORK
PANEL
Supply,Installation, testing and commissioning of Panel Board as per
IS , Technical Specifications & respective drawings. The unit rate for
each item shall include Supply & delivery of the panels at the site.
Shifting of panels from site store to the suitable location.(If applicable)
Installation of panel in Electric room or Location suggested by client
within campus including removing packing. Earthing all components,
frame etc. to a common internal earth bar. Supply & fixing all
accessories and supporting structure. Supply and fixing of M.S. 100
mm. channels for fixing the panels connection, testing &
commissioning. Checking of Internal connection and wiring, operation
of switches, starter, MCCB, MCB, relays, contactors etc. Supply of
necessary tools, hardware, testing hardware, testing equipment etc.
Electrical contractor shall carry out the insulation test at site & all the
readings shall be submitted in duplicate to the consultant or engineer-
in-charge.
MAIN LT PANEL Each 1 153000.00 153,000
Providing and erecting Approved make exhaust fan ISI mark A.C.
23OV.50 c/s.300x300 mm. size erected on existing cutout [Make shall
be approved by Engineer in charge]
Each 16
1260.00 20160.00
SUB TOTAL-ELECTRICAL-NON DSR WORKS 173,160
8.0 PLUMBING WORK
Providing and Laying & Jointing in true line level 75 diameter
U.P.V.C (Type'B') conforming to IS13592-1992 with one end plain
and other end socketed with rubber ring, and fittings conforming to
ISI 14735-1999 of approved make for drinage system pipe line, pipe
shall be jointed with each other with rubber lubricant,pipe shall be
fixed on wall using of PVC clamp of the size 75 mm diametre x210
mm length x 196 mm height at every 2000 mm center to center or
shall be concealed in walls as directed including testing of pipes and
joints and jointed with adhesive solvant cement including cost of all
materials.
(i) 75 mm Dia(DOWNTAKE FOR SOIL WATER AND RAIN
WATER)
Rmt
110
350.00
38500.00
Providing and fixing C.P Health Faucet with 1 meter flexible pipe
and wall hook approved make. The fixing include drilling &
installation of wooden plug with C.P. brass screw with making the
wall good with finishes as per instruction of Engg. In charge etc.
complete.
(Cera-CG205/ Parryware-T9937A1 / Hindware-F160027)
Each
7
435.00
3045.00
Providing and fixing Angle Cock with screw, back nuts all
necessary fittings etc. Completed
(Cera-CM108/ Parryware-T9939A1 / Hindware-F100043)
Each
15
476.00
7140.00
Providing and fixing 32 mm dia C.P. brass waste for wash basin or
sink.
(Cera- / Parryware-T9911A1 / Hindware-)
Each
15
180.00
2700.00
Providing and fixing Chromium plated bottle trap with necessary
coupling of approved quality for wash basin.
(Cera-CM104 / Parryware-T3201A1 / Hindware-E850015)
Each
15
891.00
13365.00
Supply installation testing and commisioning of HAND OPERATED
1.1 LITER CAPACITY soap dispenser, Push-Button type,
White/smoked. Cover in ABS Thermoplastic body.
(Cera-CA211 / Parryware-T3201A1 / Hindware)
Each
15
1285.00
19275.00
Providing and fixing CP brass towel rail complete with C.P. brass
brackets fix to wooden plug with CP brass screws. I) 600 mm X 20
mm
(Cera-CA303 / Parryware-T6001A1 / Hindware-F880005)
Each
12
900.00
10800.00
Providing and fixing of screwed down bib taps of following size (A)
Brass chromium plated screw down bib tap of 20mm (Cera-CC103 /
Parryware-T3504A1 / Hindware-F200003)
Each
18
608.00
10944.00
Signature of EPIL 21 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
Providing and fixing C.P. brass overhead shower with 15 mm or 20
mm inlet Arm
(A)100 mm dia. (Cera-CH102,CG416A/Parryware-
G0132A1,T9901A1/ Hindware-F160039)
Each
4
845.00
3380.00
Providing and fixing concealed Stop cock for overhead shower
consisting of fitting sleeve, operating lever and adjustable wall flange
of approved quality and of 1/2" size as directed below
(Cera-CC127 / Parryware- / Hindware)Each
4
860.00
3440.00
Providing and fixing pillar tap capstan head screw down high
pressure with screw and back nuts of (I)15mm Dia.
(Cera-CC101 / Parryware-T3501A1 / Hindware-F200001)
Each
15
608.00
9120.00
Providing and fixing concealed Stop cock for Urinal consisting of
fitting sleeve, operating lever and adjustable wall flange of approved
quality and of 1/2" size as directed below
(Cera-CC127 / Parryware- / Hindware)Each
4
860.00
3440.00
125,149
9.0 AIR-CONDITIONING
Supply of variable refrigerant system including outdoor units (top
discharge), indoor units, remote controller, imported refrigerant joints,
refrigerant copper piping, M.S.structure for outdoor VRF units,
Supply, installation, testing & commissioning of insulated UPVC
heavy duty drain pipes, TPN distribution board for power supply,
testing and commissioning
HP 80 40000 3,200,000
10.0 KITCHEN EQUIPMENTS+EXHAUST SYSTEMS
SPIRAL MIXER 20 LTR, SPIRAL MIXER 30 LTR, ELECTROLUX
MICROWAVE 20
LTRS, ELECTROLUX MICROWAVE 25
LTRS, Reach In Refrigerator 2 Door
( 593 ltrs. Capacity), Reach In Refrigerator 4 Door
( 1288 ltrs. Capacity), VISI COOLER 350 LTR, other utensils, etc….
1,500,000
11.0 LED TVs
55 inch full HD 1080P TVs of Sony, Samsung, LG or equivalent make each 3 65900 197,700
12.0 MUSIC SYSTEM
Home theatre system with speakers and sub-woofers of JBL, Sony,
Bose, Samsung or equivalent make
each 3 49900 149,700
3-way Floor Standing Passive Speakers of with maximum
recommended amplifier power 225 W and frequency response of
38Hz-22kHz JBL, normal impedance of 8 ohms and sensitivity of
91dB of JBL, Sony, Bose, Samsung or equivalent make
each 3 70000 210,000
359,700
SUB TOTAL PLUMBING-NON DSR WORKS
Signature of EPIL 22 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
13.0 FIRE-FIGHTING EQUIPMENT
13.1
Supply,Installation,testing&commissioning of „C‟ class MS Pipe as
per IS3589 /IS1239 for undegound/overground pipes with welded /
flanged connection with saddles, supports (all with screwed/welded
joints) as required including pipe of shorter lengths, tapering
connecting pieces, short or long bends, specials like sockets, union
nuts, elbows, reducers, plugs, Tees etc.Complete to make the system
operative as required by LFA / TAC authorities the pipes will have to
be laid and fixed in trenches. The work includes excavation, back
filling, dewatering, etc., making holes in brick or RCC walls, slabs/
roofs and making good the damages by bringing to the original
condition to the satisfaction of the Architect and painting two coats of
approved shade(Post office red)of enamel paint over a coat of
approved primer for over heads pipes and providing and fixing
pypkote (corrosion protection tape) including supply and application of
pipe coating and spiral Wrapping for underground piping (wrapping
should have overlap o zinc passivation shall be used in fabrication of
panels. for corrosion protection of pipes for underground
installation.The piping installation to be put to Hydraulic test to 1.5
times the working pressure& as per latest applicable codes & standard
before applying paint or pipe coating or wrapping etc. complete.
13.1.1 150mm Dia Mtr. 3300 0
13.1.2 100mm Dia Mtr. 25 2343 58575
13.1.3 80mm Dia Mtr. 1637 0
13.2
Providing and fixing hydrant stand posts of 80 mm dia. With flanges,
reducers and accessories and supply, fixing single headed 63 mm dia
G.M. Hydrant Valve in the courtyard IS:5290 Including 2 coats of
approved enamel paint (red) over a coat of primer,complete with
2.1/2” „Morris‟ pattern instaneous couplings, etc. complete.
Yard Hydrant:-63mm (1000MM Height from FGL.)
Nos. 1 6500 6500
13.3
Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A
TAC/ LFA approved of 15 mtr. x 2 No. standard length of approved
pattern and size including gun metal male and female Coupling duly
bound with copper wire etc. complete
63mm RRL Hose 15 mtr. x2 nos.
Nos. 1 5200 5200
13.4
Providing and fixing landing valve 63mm dia. With flanges, reducers
and accessories and supply, fixing single headed 63 mm dia G.M.
Hydrant Valve in the courtyard IS:5290 Including 2 coats of approved
enamel paint (red) over a coat of primer,complete with 2.1/2” etc.
complete.
Landing Valve-63mm
Nos. 1 6000 6000
13.5
Supplying and fixing 4 way Fire Brigade service inlet of size 150 mm
dia. with 4 No. 63mm (2.1/2") size GM male outlets ( bronze male
coupling) including metallic cover of mild steel and glass front,
indicator plates,150mm BFV,NRV, etc. complete
4 Way Fire Brigade service inlet.
Nos. 1 18348 18348
13.6
Providing & fixing 2 Way Gunmetal Fire Brigade Suction Hose
coupling (Draw out connection) with Nut for female coupling as per
IS:902-1974 complete with 100mm dia G.I. Suction pipe and 2 Nos.
of 150mm dia foot valve (to be connected to Static Tank).Nos. 1 18348 18348
13.7Providing and fixing CO2 type fire Extinguiser Hand appliances 4.5
Kgs as per ISI markNos. 2 5268 10536
13.8Providing and fixing DCP type fire Extinguiser Hand appliances 5 Kgs
as per ISI markNos. 2 2568 5136
13.9Supply installation and testing of 65 mm dia float valve with necessary
fittings and support and accessoriesNos. 1 350 350
13.10
Supply, installation testing & commissioning of MS pipes (IS 1239
heavy duty) and fittings for fire tank inlet, fire brigade inlet, fire
brigade outlet, Siamese connection, fire water inlet, test pipe
connection etc and as shown in drawings complete with supports,
hangers, painting etc as per specifications. 150mm
Mtrs 20 2165 43300
Signature of EPIL 23 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
13.11
Supply, installation, testing and commissioning of level electrode (
high and low level) with necessary control wires in G.I conduits and
terminated and connected to fire pumps control panels for Electric,
Diesel and jockey pumps.
Nos. 1 5000 5000
13.12
100 mm dia tanks vent connection with stainless steel wire mesh of
approved quality sandwiched between flanges with necessary welding
and bolts, washers and gasket etc. as per the approval of the engineer.Nos. 4 2000 8000
13.13
Providing and fixing of G.I (Class `C‟) pipes (IS:1239 Part-I), and
fitting like flanges, tees, elbows, bends, Junctions, Reducers etc;
clamps / structural steel supports as required/directed at site
including cutting & making good the walls, RCC etc., cutting
chases & filling the same with cement conc. 1:3:6 (1 cement :3 coarse
sand :6 stone aggregate of 12mm nominal size) including painting the
exposed pipes with desired shade of two or more coats enamel paint
over a coat of primer as given in specification.
13.13.1 25mm Dia Mtr 25 620 15500
13.13.2 32mm Dia Mtr 70 820 57400
13.13.3 40mm Dia Mtr 10 1020 10200
13.13.4 50mm Dia Mtr 25 1280 32000
13.13.5 65mm Dia Mtr 25 1650 41250
13.14
Providing and fixing 15mm dia, Quartzoid bulb type G.M. Sprinkler
Head (UL/FM/LPC/TAC listed/ Approved chrome plated complete
with decorating plate (Rosette).
13.15 Set to operate at 68OC - Pendant type Nos. 30 900 27000
13.16 (B) FIRE PUMPS & RELATED ACCESSORIES
13.17
Supply installation, testing and commissioning of all pumps and it
related material, support, concrete bases, flanges with nuts bolts and
gaskets, welded and fittings, hangers, MS supports etc as per the
requirement and approval of engineer including the following items.
13.17.1 150 mm dia butterfly valve as per I.S 13095 PN 10 Nos. 6 6908 41448
13.17.2 150 mm dia. Y' Bronze suction strainer of PN 10 Nos. 3 6600 19800
13.17.3 150 mm dia flanged discharge side flexile connector PN20 Nos. 3 11994 35982
13.17.4 150 mm dia swing check valve PN20 Nos. 3 6600 19800
13.17.5150 mm dia butterfly discharge side valve as per I.S 13095 of PN20
Nos. 3 6908 20724
13.17.6 150 mm dia MS 'C' class Discharge header pipe Mtr 30 6908 207240
13.18
Providing and fixing cast iron butterfly valve complete with epoxy
coated disc, carbon steel shaft and lever actuator including flanges and
nut bolts etc complete as per I.S 13095 of PN25 rating.
13.18.1 65mm Dia Nos. 4 2900 11600
13.18.2 80mm Dia Nos. 16 3500 56000
13.18.3 100 mm dia Nos. 6 5000 30000
13.18.4 150mm Dia Nos. 4 7500 30000
Signature of EPIL 24 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
13.19
Supplying & installing completely testing & commissioning of
centrifugal type main fire pump(electrical driven) for hydrant main /
sprinkler main with cast iron casing & bronze impeller & internal
parts, make as approved by TAC/CFO for fire duty, complete with
coupling, coupling guard necessary base frame, foundation bolts, RCC
foundation,capable of discharging 1620 lt/min against 80 mtr. head
against all losses complete. The scope shall also include electrical
TEFC motor, operated on 3-ph, 440-V, 50 Hz, 1500 RPM Syn. speed
with „B‟ class winding, make as approved by TAC / LFA. The pump
shall be capable of giving not less than 150% discharge at a head not
less than 65% of the rated head. Motor to be of continuous rating etc.
complete.
Pump-Motor:-Discharge-1620 LPM, Head 80 Mtr.
Nos. 1 577405 577405
13.20
Supplying and commissioning of Diesel Engine driven fire pump
suitable for automatic/ manual operation consisting of the following
as under:End Suction Fire Pump as per approval requirement of UL /
FM having a capacity of 1620 lpm at 80 meter head.The pump shall
be multistage radially split top center line discharge, self venting
casing.The pump construction shall be cast iron.The shaft shall be
fitted with stainless steel sleeves and be supported by two back to back
thrust ball bearings and one radial roller bearing. the back pull out
design allow the complete rotating assembly to be removed without
disturbing the casing piping connection
Nos. 1 619667 619667
13.21
Supplying and commissioning of Electrical driven Jockey pump
suitable for automatic/ manual operation consisting of the following
as under: Multi stage end suction horizontally mounted centrifugal
pump running at 2900 r.p.m. capable of delivering 180 LPM against a
total head of 80 meters complete with tail pieces for proper connection
to suction and delivery line.Squirrel cage, TEFC induction motor
suitable for 415 + 10% 3 phase 50 Hz A.C. supply & of
approximate 7.5 kw for the above pump running at 2900 r.p.m. (as
per specifications).
Nos. 1 140677 140677
13.22
Design, fabrication, assembling, wiring, supply installation, testing
and commissioning of Main LT panel / Main distribution panels
/ sub- distribution panels, fabricated out of 14 gauge CRCA sheet
steel in cubicle compartmentalized, free standing floor mounted, dust
and vermin proof with reinforcement of suitable size angle iron,
channel, `T‟ sections and / or flats wherever necessary. 16 gauge
CRCA sheet steel shall be used for final distribution panels. 3 mm
thick cable gland plates shall be provided on top of the panels. Panels
shall be treated with all anti corrosive process before powder coating
as per specifications and final approved shade. 2 Nos. earthing
terminals shall be provided for all distribution panels. Panels shall
be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting
hooks shall also be provided in case of large panels. Approval
shall be taken for each panel in the form of shop drawings.
Galvanized hardware with zinc passivation shall be used in fabrication
of panels.
Nos. 1 385000 385000
TOTAL 2,563,986
Signature of EPIL 25 Signature of Bidder
SR. NO. DESCRIPTION UNIT QTY RATE AMOUNT
14.00Demolition and Dismantling of Existing Kitchen and Painting
Workshop
Total Area for demolition L.S. 825000
Demolishing cement concrete manually/ by mechanical means
including disposal of unserviceable material & cutting, stacking of
usable material as per direction of Engineer - in- charge
15.00 Shifting of Existing Kitchen
Shifting all existing kitchen equipments/electronic items to the new
location as required by NID. Construction of new platforms in the new
location alongwith other infrastructure such as plumbing and electrical
connections as required by NID for the temporary kitchen facility L.S. 200000
16.00 Shifting Khopcha Building
Shifting of the outdoor furniture in the existing “Khopcha” to the new
location as suggested by NID and related site development as required L.S. 100000
17.00 Shifting of Painting Workshop
Construction of shed structure at the suggested location by NID
including shifting of all the required equipments and infrastructure
present in the existing painting workshop to the new locationL.S. 250000
GRAND TOTAL-PART-II (ALL NON DSR ITEMS) 15182648.1
Signature of EPIL 26 Signature of Bidder