6
ENGINEERING & TECHNOLOGY NSHM Knowledge Campus, Durgapur Group of Institutions: Arrah, Shibtala, via Muchipara, Durgapur 713 212 Ph.: (0343) 253 3813/14 nfet.nshm.com Admissions helpline: 98000 11235 | 99039 85025 Disclaimer This is an information booklet of NSHM Knowledge Campus, Durgapur Group of Institutions which was published in March, 2016 and the information given was correct at that time. It is intended primarily for those considering admission to the college in the year 2016. We reserve the right to modify any statement if necessary, to make variations to this content or methods of delivery of programmes of study, to discontinue programmes or to merge or combine programmes. If such action is reasonably considered by the college, every effort will be made not to do so, notice of any change will be given and the college will use all reasonable endeavours to provide a suitable alternative. Information about specific entrance requirement is intended as a guide only. All disputes are to be settled within the jurisdiction of Durgapur.

ENGINEERING & TECHNOLOGYnfet.nshm.com/wp-content/uploads/2016/04/NFET_Brochure_2016_V2.… · NSHM Faculty of Engineering & Technology was ... Reliance • Indian Seamless Metal Tube

Embed Size (px)

Citation preview

ENGI

NEER

ING

& TE

CHNO

LOGY

NSHM Knowledge Campus, Durgapur Group of Institutions:Arrah, Shibtala, via Muchipara, Durgapur 713 212Ph.: (0343) 253 3813/14

nfet .nshm.com

Admissions helpline: 98000 11235 | 99039 85025

DisclaimerThis is an information booklet of NSHM Knowledge Campus, Durgapur Group of Institutions which was published in March, 2016 and the information given was correct at that time. It is intended primarily for those considering admission to the college in the year 2016. We reserve the right to modify any statement if necessary, to make variations to this content or methods of delivery of programmes of study, to discontinue programmes or to merge or combine programmes. If such action is reasonably considered by the college, every effort will be made not to do so, notice of any change will be given and the college will use all reasonable endeavours to provide a suitable alternative. Information about specific entrance requirement is intended as a guide only.All disputes are to be settled within the jurisdiction of Durgapur.

Our Mentors

Padma BhushanProf. Bikash SinhaFormer Homi Bhabha Professor,Department of Atomic Energy,Government of IndiaFormer Director, Saha Institute of Nuclear Physics & Variable Energy Cyclotron Centre, Kolkata

Prof. (Dr.) P.K. BoseCampus Director,NSHM Knowledge Campus, Durgapur Group of InstitutionsDirector (Former), National Institute of Technology, AgartalaDirector (Former), School of Automotive Engineering, Jadavpur UniversityProfessor (Former), Mechanical Engineering Dept., Jadavpur University

Padma ShriDr. Yagnaswami Sundara RajanHonorary Distinguished Professor in Department of Space (DOS), ISROFormer Vice-Chancellor, PunjabTechnical University

Dr. Santanu ChakrabartiEducationist & Former Head, Research and Applications,Tata Steel, Jamshedpur

NSHM Faculty ofEngineering& TechnologyNSHM Faculty of Engineering & Technology was established in the year 2010 under the aegis of NSHM Knowledge Campus, Durgapur Group of Institutions. True to the group’s philosophy, the college aims to impart sound technical knowledge imbued with human values. This, we believe, will make our students creative and globally competent professionals.

nfet .nshm.com

Engineering & Technology

NSHM Edge• Eminent and well-experienced faculty members

• Central Library: A well-stocked library housing books,

journals, periodicals etc. from all over the world with a

digital library containing e-books, e-journals, etc.

• Wi-Fi Campus: High-speed Wi-Fi connection

powering the entire campus

• E-learning: Interactive, dynamic and intuitive way of

improving the learning process through digital resources

• Research & Development Cell: For conducting research

investigations within its academic programmes, under all

the departments

• Industry-Institute Partnership Cell: For developing close

relationship between the industry and various

departments of the institute setup to improve the

students’ proficiency in a variety of languages

• Training & Placement Cell: For providing internship and

placement opportunities in engineering and allied industries

• Student Care Facilities: Medical unit, cafeteria,

reprographics, banking facility (ATM), parking lot,

uninterrupted power supply, separate hostels for boys

and girls, 24-hours power back-up, sports complex for

outdoor and indoor games, amphitheatre, multi-specialty

gymnasium, yoga & meditation centre

• Students’ Club: Tech Knights (science & technology),

robotics, photography, quiz & debating, fine arts, music &

drama

• Patent Cell: Encourages and supports innovative ideas

from faculties and students which may be converted to

intellectual property

• Seminar & Workshop Cell: For conducting innovative

seminars and workshops featuring industry experts and

industry doyens

• Soft Skill & Personality Development Programme: Special

program to groom the students and make them better

communicators

• Entrepreneurship Development Programme: Special

program to transform the students into entrepreneurs

and business leaders

• Departmental Laboratories: State-of-the-art labs for all

departments that provide the students with the opportunity to

engage in hands-on learning

• Language Lab (in collaboration with IIT-KGP):

Ultra-modern setup to improve the students’ proficiency

in a variety of languages

• Special Academic Courses: FOSS by IIT Bombay, Academic

MOU with CDAC, Nokia Here

nfet .nshm.com

Engineering & Technology

Laboratories:NFET is home to state-of-the-art laboratories for alldepartments that provide a comprehensive learningenvironment for all students.

Mechanical EngineeringThe department is fully equipped withlaboratories namely:• Mechanical workshop including automobile lab • Manufacturing technology laboratories including foundry and forging• Engineering drawing and AutoCAD lab• Strength of materials and applied mechanics lab• Fluid mechanics and hydraulic labs• Material testing lab• Metrology and measurement lab• Internal combustion engine lab• Dynamics of machinery labs• Refrigeration and air conditioning lab• Advance manufacturing lab including CNC lathe, electric discharge machining and 6 axis robots • Welding lab

Civil EngineeringThe following lab facilities are there in our campus:

• Soil mechanics lab, able to perform Vane Shear

test, standard and modified Proctor test,

consolidation test, sieve analysis etc.

• Strength of material lab having instruments to

perform compressive strength test, Brinell

hardness test, dynamic impact test, torsion test etc.

• Concrete lab to perform flexural strength,

measurement of workability of concrete, setting

time of cement, mix design of concrete etc.

• Transportation lab to perform impact, abrasion value

test, flakiness and elongation test of aggregates;

penetration, softening pt., flash and fire pt. of

bitumen, Marshall mix design, CBR value test of

subgrade material etc.

• Survey lab to perform chain surveying, compass

surveying, plane table surveying, levelling, theodolite

traversing, total station surveying etc.

• AutoCAD lab having analytical and design based

software (STAAD.Pro)

Engineering & Technology

nfet .nshm.com

Computer Science& Engineering• Basic Computing & Internet Technology lab

• Visual Basic & Computer Architecture lab

• DBMS & Object Oriented Programming lab

• Internet lab

• AutoCAD Lab & Artificial Intelligence lab

• Project & Software Engineering lab

• Operating System & Networking lab

Electronics & Communication Engineering• Basic Electronics lab

• Analog Electronics lab

• Solid State Device lab

• Signal and Systems lab

• Digital Electronics lab

• EM Theory & Antenna lab

• Analog Communication lab

• Microprocessor & Microcontroller lab

• Control Systems lab

• Digital Communication lab

• Digital Signal Processing

• VLSI Design lab and Design lab

• Indian Oil • Indian Railways • Paytm • CTS • Accenture • Dell • Mindtree • Reliance • Indian Seamless Metal Tube • Odessa Technologies • Wipro • Genpact • IBM • Air India • Bokaro Steel • Bridge & Roof • Burn Standard • CLW• Dhunseri Petrochem • DSP • DVC • DTPS • HP • IFB • Jai Balaji • Lafarge Cement • Nissan • NTPC Farakka• Paharpur Cooling Towers • Ultratech Cement • Tata Steel • ASP • IOC • HPL • Coal India • Tata Motors• Eastern Railways • BSNL Kalyani • Mackintosh Burn Ltd. • PWD Bankura • RITES Ltd. • Simplex Infrastructure• Usha Martin • Aditya Engineering • Concierge Technologies • Inolyst Consulting • DGP Steel Star Engineering Pvt. Ltd.• Synergy Group • KND Engineering • Keeves Technologies • Qsource Global Consulting Pvt. Ltd. • Murli Industries• Shristi Infrastructure Development Corporation Ltd. • Tata Consultancy Services • CMS Infosystems Pvt Ltd.• Vag-Valves (India) Pvt. Ltd. • Teks Mobile Teknowledge Software • Chemtex Speciality Ltd. • Think & Learn• KMI Business Technologies Pvt. Ltd. • Spanco Constratech Pvt. Ltd. • Poornam Info Vision Pvt. Ltd. • Akademika Lab Solution • Anupam Electricals & Engineering Industries Pvt. Ltd. • Polycab • Ashai• Globus Soft Technologies (P) Ltd. • Paharpur Cooling • Jindal Steel • Retail On • Financial Tech• Jiwanram Sheoduttrai Group • Sobha Developers

Electrical Engineering• Basic Electrical lab

• Measurement lab

• Circuit Theory lab

• Electrical Machines lab

• Power Systems lab

• Control Systems lab

• Power Electronics lab

Electrical &Electronics Engineering• Basic Electrical lab

• Power System lab

• Electrical and Electronics

Measurement lab

• Sensor & Transducer lab

• Control System lab

• Power Electronics lab

• Circuit & Network lab

• Project & Hardware lab

• Simulation lab

Training & Placement

Department ofBasic Sciences• Physics lab

• Chemistry lab

• Numerical Analysis lab

• Nutrition Science lab

• Language lab

ProgrammesOffered

B.Tech. Approved by AICTE and affiliated to MAKAUT(formerly known as WBUT)

• Computer Science and Engineering• Civil Engineering• Electrical Engineering• Electrical and Electronics Engineering• Electronics and Communication Engineering• Mechanical Engineering

Eligibility Criteria:• WBJEE 2016 & JEE-MAIN 2016 (CBSE Joint) merit listed candidates shall have to adhere to the cut-off marks in qualifying examination (10+2) i.e., at least 45% marks in Physics, Chemistry and Mathematics taken together and with at least 30% marks in English (for all category of candidates) with individual pass marks in Physics, Chemistry, Mathematics, English and Vernacular (or any other fifth subject)• Lateral entry through JELET-2016 / Decentralised Counseling (for limited seats )

Course Duration: 4 years (8 semesters)

M.Tech. Approved by AICTE and affiliated to MAKAUT(formerly known as WBUT)

• Electronics & Communication Engineering

Eligibility Criteria: B.E./B.Tech. in ECE/AEIE/Control & Instrumentation Engg. or M.Sc. in Electronics/Physics (with specialisation in Electronics) or equivalent to B.E./B.Tech

Course Duration (Regular): 2 years (4 semesters)

Diploma Approved by AICTE and Diploma awarded by WBSCTE

• Mechanical Engineering• Civil Engineering

Eligibility Criteria: Passed in Secondary level examination and qualified in JEXPO 2016 examination organised by WBSCTE.Other conditions are applicable as per State Government notification.

Course Duration: 3 years (6 semesters)

Engineering & Technology

nfet .nshm.com

• The NASSCOM eSummit 2016 saw 12 students of NSHM Faculty of Engineering & Technology, Durgapur receiving the prestigious "Shri Dewang Mehta Excellence Award"

• IT Olympiad: Harshvardhan Karn (Dept. of CSE), became a semi-finalist of the prestigious "IT Olympiad 2016" (student Category)

• Publication: Soumitra Ghosh, and Tanushree Dutta, “An Efficient Multicast Routing Technique using Genetic Algorithm over WDM Mesh Networks”, published in International Journal of Advances in Computer Networks (JACN), Vol. 3, No. 1, pp. 56 – 62, March, 2015

• 3rd position in Robotics event at IIT-Kharagpur, January 2014

• 1st position in Robotics event at IIEST-Shibpur, March 2014

• 4th position in Hardware Designing at IIT- Kharagpur, 2014

• 3rd position in Robotics event at NIT-Durgapur, 2013 and IIEST-Shibpur, 2013

• Got 2nd position in the Robotics competition “Death Race” in ISM Dhanbad and developed an amphibious robot for the “Anfibio” competition at ISM Dhanbad in October 2012

• 2nd position in Robotics event at ISM-Dhanbad, October 2012

• Acquired 1st position in a quiz contest organized by WBSEB, among 50 Engineering colleges in West Bengal

• Involved in design & fabrication of automation system supplied by M/S Automax India Ltd. to Lucknow Airport

• Achieved 1st position in NVL and runners up in Volleyball tournament in ISM & also WBUT Cricket T20

• Amon Ghosh and Arijit Manna (2nd year students) achieved different positions in robotics competition held at IIT Kharagpur (4th), IIT Bombay (13th) and NIT Durgapur (3rd)

Success StoriesEvents & Seminars

Nikitaworking with TCS

Rajib Kr. Guptaworking with Reliance

Soumitra Goswamiworking with BroadSoft

Riya Palworking with Wipro

Engineering & Technology

nfet .nshm.com

Arnab Kumar Sardarworking with MGNREGA Cell

Prasun Mukhopadhyayworking with Wipro

Tarique Ejazworking with Mindtree

Tuphan Kunduworking with Paytm