engineering - Mod-Fixmodfix.com/assets/products/Engineering.pdf · DAVE SAYS All our Draper Expert ... American National Thread UNC-UNF, in the range 4-42TPI. ... 10 piece Metric

Important Box Qty info: For your convenience we recommend ordering in box quantity or multiples of box quantity where shown. You can still order in any quantity unless specifically stated otherwise.

engineeringprecision tools for the professional

NEW!look out for products in this section

precision 406-409 engineering

general 410-425 engineering

406

PRECISION ENGINEERING section 8

Prices are list, each and exclude VAT.

PDVC150M

Dual Reading Digital Vernier CaliperExpert Quality, metal-bodied manufactured frombrushed stainless steel. Extra large display reading0.01mm and 0.005". Range 0-150mm/6". Supplied withSR44 battery. Display packed in plastic storage case.

Stock Box PriceNo. Description Qty each

46610 Vernier Caliper – £ 44 .00 D 55361 Spare SR44 Battery – £ 3 .50 D

1 PVC150D

Dual Reading Digital Vernier CaliperExpert Quality, manufactured from hardened stainlesssteel. Extra large display reading 0.01mm and 0.005".Range 0-150mm/6". Supplied with SR44 battery. Displaypacked in plastic storage case.


52427 Vernier Caliper – £ 103 .68 D 55361 Spare SR44 Battery – £ 3 .50 D

2

PDV150

Metric Dial CaliperExpert Quality, manufactured from hardened stainlesssteel. Slider displacements are amplified by a rack andpinion mechanism and indicated on the dial. Four waymeasurement: internal, external, depth and step.Reading 0.02mm. Slider has lockscrew function. Displaypacked in plastic storage case.

Stock Box PriceNo. Range Qty each

52417 0-150mm – £ 62 .16 D

3

PTGS

6 piece Telescopic Gauge SetExpert Quality, for measuring of bore diameter andgroove width. The spring-loaded plunger expands withinthe hole. Knurled locking screw allows plunger contactsto be held in position, removed and measured with amicrometer. Satin chrome finish. Supplied in PVCstorage wallet with ranges marked.

Contents:• Gauge range: 8-13mm (5/16 - 1/2") Length: 115mm• Gauge range: 13-19mm (1/2 - 3/4") Length: 115mm• Gauge range: 19-31mm (3/4 - 1.1/4") Length: 115mm• Gauge range: 31-54mm (1.1/4 - 2.1/8") Length: 145mm• Gauge range: 54-89mm (2.1/8 - 3.1/2") Length: 145mm• Gauge range: 89-150mm (3.1/2 - 6") Length: 145mm

Stock Box PriceNo. Qty per set

52416 – £ 42 .92 D

6

BG50/160

50-160mm Bore Gauge SetExpert Quality, accurately measures bores, detect tapers or ovality.0.01mm accuracy. Display packed in storage case.

Contents:• 3mm travel dial test indicator • 55mm extension bar• 4 spacer rings size: 0.5, 1.0, 2.0 and 3.0mm• 12 measuring rods size: 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 and 105mm


02753 – £ 125 .42 D

VERNIER& DIALCALIPERS

MEASURING & GAUGE SETS

Vernier CalipersExpert Quality, manufactured from hardened stainlesssteel. Reading 0.02mm/1/1000". Four waymeasurement: internal, external, depth and step. Satinscales with fine adjustment. Fine screw adjustment.Display packed in plastic storage case.

Stock Part Box PriceNo. No. Range Qty each

50605 PVC140F 0-140mm/5.1/2" – £ 41 .26 D 52379 PVC200F 0-200mm/8" – £ 49 .80 D

5

PVC150

Vernier CaliperExpert Quality, manufactured from hardened stainlesssteel. Reading 0.02mm and 1/1000". Four waymeasurement: internal, external, depth and step. Satinchrome plated beam with raised edges and thumblock.Display packed in plastic storage case.


50590 0 -150mm/6" – £ 47 .36 D

4

7

DAVE SAYSAll our Draper Expert vernier calipers are fully tested by themanufacturer to ensure high levels of accuracy and quality of materials used.

If you specify a Draper vernier caliper you know it’s the best!

DAVESAYS

QUALITY MAKES THEDIFFERENCE

407

PRECISION ENGINEERING


DEM

Dual Reading DigitalExternal MicrometersExpert Quality, with enamelled frame, heat plates, satin chrome thimble and sleeve.Carbide tipped measuring anvils, lock and ratchet stop. Graduations 0.001mm and0.0005". Ball end cap for measuring curved surfaces. Supplied with SR44 battery.Display packed in plastic storage case.


46599 M/meter 0-25mm-0-1" – £ 137 .10 D 46600 M/meter 25-50mm-1-2" – £ 143 .14 D 55361 Spare SR44 Battery – £ 3 .50 D

1

PEM

Metric External MicrometersExpert Quality, with enamelled frame, heat plates, satin chrome thimble and sleeve.Graduations 0.01mm. Carbide tipped anvils, lock and ratchet stop. Supplied in plasticstorage case and display packed.


46603 0-25mm – £ 27 .62 D 46604 25-50mm – £ 28 .82 D 46605 50-75mm – £ 31 .96 D 46606 75-100mm – £ 35 .06 D

2

PDDG

Dual Reading Digital Dial Test IndicatorExpert Quality, dial diameter 55mm with mounting lug.0-25mm/0-1" travel. Uses CR2032 battery (supplied).Display packed in plastic storage case.

Stock Box PriceNo. Graduations Qty each

46608 0.01mm/0.005" – £ 85 .66 D 12282 Spare CR2032 Battery – £ 1 .90 D

4

PDG

Dial Test IndicatorsExpert Quality, reading 0-50 in metric or imperialgraduations. Dial diameter 55mm. Display carton.

Stock Box PriceNo. Graduations Range Qty each

51830 0.01mm 0-10mm – £ 38 .40 D 51831 0.005" 0-0.1" – £ 44 .46 D

5

PDG05M

Metric Dial Test IndicatorExpert Quality, reading 0-100 in metric graduations.Range 0-5mm. Dial diameter 41mm. Display carton.

Stock Box PriceNo. Graduations Qty each

51855 0.01mm – £ 47 .50 D

6

MS-6

6 piece Measuring SetUseful set of precision measuring instruments.Display carton.

Contents:• spring divider• outside caliper• inside spring caliper• depth gauge• slide rule• sliding caliper


59110 – £ 31 .70 D

7

PEM/4

4 piece Metric ExternalMicrometer SetExpert Quality, with enamelled frames,heat plates, satin chrome thimble andsleeve. Graduations 0.01mm. Carbidetipped anvils, lock and ratchet stop.Supplied in plastic storage case anddisplay packed.

Contents: one each of range; 0-25; 25-50;50-75 and 75-100mm


46607 – £ 126 .80 D

3

408

PRECISION ENGINEERING section 8


PDGS

Metric Dial TestIndicator KitExpert Quality, ideal all-round kit for engineers andapprentices. Dial test indicators accuracy 0.01mm.Packed in blow mould case with display sleeve.

Contents:• Metric dial test indicator (0-25mm) with plunger• Metric dial test indicator (0-1.5mm) with stylus• Magnetic stand with fine adjustment• 22 interchangeable tips for dial test indicator with

plunger• 6mm and 8mm stylus’ for dial test indicator clamp

Stock Box PriceNo. Qty per kit

46609 – £ 132 .82 D

1

MB-LDB

Magnetic StandFor use with dial gauges, etc. Powerful magnetic basewith on/off switch. Precision ground surface. Displaycarton.

Stock Box PriceNo. Qty each

45276 – £ 45 .84 D

2MB-LDFAB

Magnetic Stand with Fine AdjustmentFor use with dial gauges etc. Powerful magnetic basewith on/off switch. Fine adjustment screw for quick andaccurate settings. Precision ground surface. Displaycarton.


45277 – £ 47 .64 D

3

D62

150mm Spring DividersFine ground with adjustment by knurled wheel. Displaypacked.


34196 – £ 9 .56 D

4 D61

150mm Outside Spring CalipersFine ground with adjustment by knurled wheel. Displaypacked.


34237 – £ 9 .56 D

5 D60

150mm Inside Spring CalipersFine ground with adjustment by knurled wheel. Displaypacked.


39451 – £ 9 .56 D

6

401

20 Blade Metric Screwpitch Gauge SetFolding leaves, individually stamped with accuratelyformed thread profiles. Range 0.4-7.0mm. Sold loose.


45458 – £ 6 .50 D

7

407

30 Blade UNC-UNFScrewpitch Gauge SetFolding leaves, individually stamped with accuratelyformed thread profiles. American National Thread UNC-UNF, in the range 4-42TPI. Sold loose.


45440 – £ 7 .74 D

8 553

52 Blade BSW/MetricScrewpitch Gauge SetFolding leaves, individually stamped with accuratelyformed thread profiles. Ranges 4-62BSW and 0.25-6.0mm. Sold loose.


45474 – £ 10 .62 D

9

409

PRECISION ENGINEERING


Engineers Precision SquaresManufactured to BS 939 Workshop Grade B forsquareness tolerance onlySolid steel stocks with hardened, tempered and finelypolished blades. The squareness of the blade edges andthe stock working face falls within ±0.016mm/0.0064"tolerance. Display packed.

Stock Box PriceNo. Size Qty each

34049 100mm – £ 19 .38 D 34065 150mm – £ 27 .20 D

1

7324

200mm Engineers ScriberDouble ended hardened scriber with straight and 90°hardened points. Display packed.


34099 – £ 6 .52 D

2

7325

125mm Engineers Pocket ScriberReversible scriber point. Body fitted with pocket clip.Display packed.


34104 5 £ 6 .78 D

3

PCS

150mm Carbide Tip Pocket ScriberPlated steel body with carbide tip and pocket clip. Formarking on hard and soft materials including steel andceramics. Display packed.


37349 5 £ 5 .76 D

4

PBPS

Universal Bevel Protractor SetExpert Quality, for accurate angle measurement of machines, moulds and jigs. Can also be used for assemblingand machining. Fully calibrated to 360° with magnifying glass. Supplied with 300mm plain rule and acute angleattachment. Display packed in hinged plastic case.


52430 – £ 66 .92 D

5

PDG

Protractor with Depth GaugeGraduated 0-180° with depth gauge 0-150mm. Display packed.


37342 2 £ 22 .96 D

6

Stainless Steel RulesExpert Quality, precision rules manufactured from hardened stainless steel mattchrome plated. The clear black graduations of 0.5mm, mm, 0.5cm, cm and 1/64",1/50", 1/32", 1/20", 1/16", 1/10", 1/2", and inches on the reverse are permanentlyetched for long service life. Packed into vinyl wallets. Display packed.

Stock Part Marked Box PriceNo. No. Length Qty each

22670 SSR6B 150mm & 6" – £ 5 .12 D 22671 SSR12B 300mm & 12" – £ 12 .76 D 22672 SSR24B 600mm & 24" – £ 25 .48 D 22673 SSR36B 1000mm & 36" – £ 49 .10 D

7

Steel RulesDouble sided with hang hole. Permanently etched graduations of cm/mm and inches,1/8", 1/16", 1/32" and 1/64". Display packed.

Stock Part Marked Rule Box PriceNo. No. Length Width Qty each

59633 D17 150mm/6" 19mm – £ 3 .14 D 59641 D18 300mm/12" 30mm – £ 4 .86 D

8

PAUL SAYSPRECISIONENGINEERS SQUARES(Stock Nos. 34049 &34065) - Two of the fewEngineers Squares thatconform to BS939,workshop grade B forsquareness. Thisguarantees the solid steelstock will never be moreor less than ±0.016mm from square. To all intentsand purposes... that’s square!

PAULSAYS

QUALITY ASSURANCEMAKES THE DIFFERENCE

NEW

410

GENERAL ENGINEERING section 8


10TDS/A

10 piece Metric Tap and Die SetManufactured from high carbon steel, ideal for cleaningthreads. Display packed.

Contents:• 4 metric coarse dies size: M3, M4, M5 and M6 - 1" O/D• 4 metric taper taps size: 3, 4, 5 and 6mm• die holder 1" O/D• ‘T’ type tap wrench capacity M3-M6


79201 – £ 29 .08 D

37M

37 piece Metric Tap and Die SetManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied with the correct drill bits for tapping.Contents held in plastic insert within steel storage case.Carton packed.

Contents:• 8 metric dies size: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x

1.0, 8 x 1.25, 10 x 1.50 and 12 x 1.75 - 1" O/D• 8 metric taper taps: sizes as dies• 8 metric plug taps (bottoming): sizes as dies• tap wrench - American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D• 8 HSS twist drills size: 2.5, 2.9, 3.3, 4.2, 5.0, 6.8, 8.5

and 10.3mm• screwpitch gauge


79203 – £ 82 .74 D

2

52MU

52 piece Combination Tap and Die Set- Metric, UNF and BSPManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied with the correct drill bits for tapping.Contents held in plastic insert within steel storage case.Carton packed.

Contents:• 7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x

1.25, 10 x 1.5 and 12 x 1.75 - 1" O/D• 5 UNF dies sizes: 1/4, 5/16, 3/8, 7/16 and 1/2 - 1" O/D• 2 BSP dies size: 1/8" and 1/4" - 1" O/D• 14 metric taper taps: sizes as dies• tap wrench-American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D with guide• 13 HSS twist drills size: 2.5, 3.3, 4.2, 5.0, 5.5, 6.8, 6.9,

8.5, 8.8, 9.9, 10.3, 11.4 and 11.8mm• screwpitch gauge • screwdriver • centre punch• 5 screw extractors Nos. 1, 2, 3, 4 and 5


79204 – £ 128 .64 D

3

75MM

75 piece Combination Tap and Die Set- Metric and BSPManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied with the correct drill bits for tapping.Contents held in plastic insert within steel storage case.Carton packed.

Contents:• 9 metric coarse dies size: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5

x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5 and 12 x 1.75- 1" O/D

• 8 metric fine dies size: 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25 and 12 x 1.25 - 1" O/D

• BSP die 1/8" BSP• 17 metric taper taps: sizes as dies• 17 metric plug taps (bottoming): sizes as dies• taper tap 1/8" BSP• tap wrench-American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D with guide• 17 HSS twist drills size: 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 4.2,

4.5, 5.0, 5.3, 6.8, 7.0, 8.5, 8.8, 10.3, and 10.7mm• screwpitch gauge • screwdriver


79205 – £ 183 .68 D

4

EVA FOAM MODULAR TOOLCONTROL SYSTEMThe set on page 411 is part of the EVA toolcontrol system. The tools sit in EVA foam which isresistant to normal workshop fluids, oil fuel, brakefluid, etc. See pages 53-55 for the entire range.

1

DAVESAYS


DAVE SAYSTo make these three (Item Nos. 2, 3 and 4) the perfectworkshop sets we’ve also included the correct tappingdrills in our kits!

For best results use in conjunction with our metal cuttingspray, Stock No. 76109, Item No. 7 opposite page.

2

3

4

411

GENERAL ENGINEERING


NEW

45MM

42 piece Metric Tap and Die Set Manufactured from tungsten steel. Taps and diessuitable for cleaning and cutting threads on mildsteel and aluminium. Supplied with tap wrench andbits for tapping. Packed in blow mould case withdisplay sleeve.

Contents:• 20 metric dies size: 6 x 1.0, 6 x 0.25, 8 x 1.25,

8 x 1.0, 10 x 1.25, 10 x 1.5, 12 x 1.5, 12 x 1.75,14 x 1.5, 14 x 2.0, 16 x 1.5, 16 x 2.0, 18 x 1.5,18 x 2.5, 20 x 1.5, 20 x 2.5, 22 x 1.5, 22 x 2.5,24 x 1.5 and 24 x 3.0mm

• 20 metric taps: sizes as dies• tap wrench • ‘T’ type tap wrench • die holder • die adaptor• screwdriver


18523 – £ 146 .22 D

1

IT35-EVA

22 piece CombinationTap and Die Set - Metric andBSP in EVA Foam Insert TrayExpert Quality, manufactured from carbon steel. Tapsand dies suitable for cleaning and cutting threads onmild steel and aluminium. Packed in EVA foam tray, idealfor tool cabinet arrangements or tool box storage.Display packed.

Contents:• 7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x

1.25, 10 x 1.5 and 12 x 1.75 - 1" O/D• 2 BSP dies size: 1/8" and 1/4" BSP• 2 BSP taps size: 1/8" and 1/4" BSP• 7 metric plug taps (bottoming): sizes as dies• tap wrench-American pattern 1/2" capacity• die holder 1" O/D with guide• screwpitch gauge• screwdriver

Stock Foam Box PriceNo. Dimensions Qty per set

49376 260 x 140 x 40mm – £ 58 .10 D

2

D26MM/A

6 piece Circular Metric Dies andHolder SetPopular sizes of 1" O/D circular split dies and die holder.Ideal for clearing threads. Manufactured from carbonsteel with cut threads. Display packed.

Contents: 6 x 1.00, 7 x 1.00, 8 x 1.25, 10 x 1.50 and 12 x1.75mm dies plus 1" O/D die holder.


79197 – £ 23 .76 D

3

201TR

Die HoldersThree screw pattern. Display packed.

Stock Box PriceNo. O/D Qty each

14445 13/16" – £ 5 .54 D 14446 1" – £ 7 .54 D

4

D25-MM/A

5 piece Metric Hexagon Die Nut SetManufactured from carbon steel. Display packed.

Contents: 6 x 1.00, 8 x 1.25, 10 x 1.50, 11 x 1.50 and 12x 1.75mm.


79198 – £ 19 .16 D

5

Circular DiesManufactured from high carbonsteel with accurately cut coarsethreads. Display packed.

Stock Part Size Box PriceNo. No. O/D Coarse Qty each

44872 SKC2 13/16" 2 x 0.40 – £ 2 .98 D 44880 SKC2 13/16" 2.5 x 0.45 – £ 2 .98 D 44898 SKC2 13/16" 3 x 0.50 – £ 2 .98 D 44905 SKC2 13/16" 3.5 x 0.60 – £ 2 .98 D 44913 SKC2 13/16" 4 x 0.70 – £ 2 .98 D 44939 SKC2 13/16" 5 x 0.80 – £ 2 .98 D 45135 SKC3 1" 6 x 1.00 – £ 3 .78 D 45151 SKC3 1" 8 x 1.25 – £ 3 .78 D 45177 SKC3 1" 10 x 1.50 – £ 3 .78 D 45193 SKC3 1" 12 x 1.75 – £ 3 .78 D

6

ARE-CTA

400ml Metal Cutting LubricantFor cutting threads using taps and dies as well asdrilling, reaming and machining in steels and aluminium.Can also be used to preserve tips on TCT circular sawsand router bits. CFC free. Sold loose.

Available in singles - order multiples of 12 to get a freecountertop display


76109 12 £ 7 .36 D

7

4522MM/A

10 piece Metric Hand Tap SetSecond taper taps manufactured from special highcarbon steel with accurately cut threads. Display packed.

Contents: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x1.25, 9 x 1.25, 10 x 1.5, 11 x 1.5 and 12 x 1.75


79200 – £ 17 .90 D

8

4522UNF/A

10 piece UNF Hand Tap SetSecond taper taps manufactured from special highcarbon steel with accurately cut threads. Display packed.

Contents: 5 x 44, 6 x 40, 8 x 36, 10 x 32, 12 x 28, 1/4" x28, 5/16" x 28, 3/8" x 24, 7/16" x 20 and 1/2" x 20 (tpi).


79199 – £ 17 .40 D

9

412



TDS-28

28 piece Metric Tap and HSS Drill SetTaps manufactured to DIN 371 and DIN 376; HSSdrills to DIN 338 and ISO 235/1All-round set comprising seven sizes of tap (taper,secondary and bottoming) and seven HSS drills. Packedin case with display sleeve.

Contents:• Taper, secondary and bottoming taps size: 3 x 0.5, 4 x

0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5 and 12 x 1.75• Metric HSS drills size: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and

10.2mm


40891 – £ 53 .34 D

1

H29MPTS

Metric HSS Twist Drills for MetricTappingManufactured to DIN338 and ISO235/1 SpecificationsExpert Quality, a selection of metric-sized high speedstraight shank twist drills specifically for drilling holesprior to tapping. Display packed one drill per card (sizes4.2-10.2mm) and two drills per card (sizes 1.6-3.3mm).

Stock Drill For Box PriceNo. Diameter Thread Qty per card

44122 1.6mm 2 x 0.4 – £ 1 .78 D 44123 2.05mm 2.5 x 0.45 – £ 1 .78 D 44124 2.5mm 3 x 0.5 – £ 1 .78 D 44125 3.3mm 4 x 0.7 – £ 1 .88 D 44126 4.2mm 5 x 0.8 – £ 1 .20 D 44127 5.0mm 6 x 1.0 – £ 1 .28 D 44128 6.8mm 8 x 1.25 – £ 1 .88 D 44129 8.5mm 10 x 1.5 – £ 2 .42 D 44130 10.2mm 12 x 1.75 – £ 3 .34 D

2

SKC1

Taper and Plug Hand TapsManufactured from high carbon steel with accurately cutcoarse threads. Packed one of each, taper and plug,(bottoming) on display card.

Stock Size Box PriceNo. Coarse Qty per card

18072 2 x 0.4 – £ 8 .16 D 18073 2.5 x 0.45 – £ 8 .16 D 18074 3 x 0.5 – £ 8 .16 D 18075 3.5 x 0.55 – £ 8 .16 D 18076 4 x 0.7 – £ 8 .16 D 18078 5 x 0.8 – £ 8 .22 D 18079 6 x 1.0 – £ 9 .76 D 18081 8 x 1.25 – £ 10 .76 D 18082 10 x 1.5 – £ 12 .80 D 18083 12 x 1.75 – £ 17 .52 D

3

4523MM/A

6 piece Metric Tap and Holder SetPopular sizes of carbon steel cut thread taps and ‘T’type holder. Display packed.

Contents: 3.5 x 0.60, 4 x 0.70, 6 x 1.00, 8 x 1.25 and10 x 1.50 taps plus ‘T’ type tap holder.


79202 – £ 22 .56 D

4

4.655.4

Schröder 11 piece Tap andScrew Extractor SetExpert Quality, manufactured bySchröder in Germany for Draper Tools.Engineers kit comprising two tapwrenches and two heads withratchet action and forward/reverseoperation and lock plus six screwextractors with square ends.Packed in case with foam insert.

Contents:• Tap wrench - capacity of square 4.6-8.0mm• Tap wrench - capacity of square 2.0-5.0mm• Tap wrench head - capacity of square 4.6-8.0mm• Tap wrench head - capacity of square 2.0-5.0mm • 6 screw extractors Nos.1-6• Tap wrench extension bar 145mm long with tap wrench

head - capacity of square 2-5mm


19662 – £ 128 .66 D

Schröder Ratchet‘T’ Type Tap WrenchesExpert Quality, manufactured by Schröder in Germanyfor Draper Tools. Ratchet action with forward/reverseoperation and lock. Two hardened jaws and polishedplated finish. Knurled screw on Stock Nos. 45680 and45698; 20mm hexagon on Stock No.19640. Displaypacked.

Stock Part Capacity of Box PriceNo. No. Square Qty each

45680 594 2-5mm 2 £ 20 .32 D 45698 595 4.6-8.0mm 2 £ 26 .14 D 19640 4.003.4 8-12mm – £ 94 .70 D 80218 Y594 Sp. 2.5mm Jaws – £ 3 .22 D 80219 Y595 Sp. 4.6-8.0mm Jaws – £ 3 .22 D

6

TTW

‘T’ Type Tap WrenchesPolished body with knurled and polished barrel. Displaypacked.

Stock Capacity of Box PriceNo. Square Qty each

45713 1.5-3.0mm – £ 6 .94 D 45721 2.5-5.0mm – £ 9 .86 D 45739 4.0-6.8mm – £ 12 .21 D

7

ACCURATELY CUT TAPERTHREADS AND PLUGS

5

TAP WRENCHES8-12mmSTOCK No.19640 SHOWN

413

GENERAL ENGINEERING


101NS

Tap WrenchAmerican pattern, general purpose model with knurledhandles and enamelled finish. Display packed.

Stock Capacity Box PriceNo. of Square Qty each

36305 2-6mm – £ 14 .50 D

1

TW

Bar Type Tap WrenchesHardened and tempered jaws, knurled handle with blackenamelled finish. Display packed.

Stock Capacity of Box PriceNo. Square Qty each

37329 2.0-8.5mm – £ 10 .82 D 37330 3.0-10.0mm – £ 12 .74 D 37331 4.25-12.50mm – £ 16 .80 D 37332 5.0-16.5mm – £ 26 .28 D

2

1B

Schröder 5 piece Screw Extractor SetExpert Quality, manufactured by Schröder in Germanyfor Draper Tools. Manufactured from chrome vanadiumsteel with square drive ends. Packed in plastic case.

Contents: one each of size: 1 (3-6mm), 2 (6-8mm), 3 (8-11mm), 4 (11-14mm) and 5 (14-18mm).

Stock Box PriceNo. Description Qty per set

45856 Extractor Set – £ 13 .12 D 33070 No.1 Extractor – £ 2 .74 D 34730 No.2 Extractor – £ 3 .32 D 33071 No.3 Extractor – £ 3 .56 D 33072 No.4 Extractor – £ 3 .88 D 33073 No.5 Extractor – £ 4 .20 D

3

SEDS-10

10 piece Metric Screw Extractorand HSS Drill SetHSS Drills manufactured to DIN 338 and ISO 235/1Spiral pattern extractors with square drive endsmanufactured from quality steel. Packed in metal casewith display sleeve.

Contents: Screw Extractors: 1 (3-6mm), 2 (6-8mm), 3 (8-11mm), 4 (11-14mm) and 5 (14-18mm)HSS Drills: 2.0, 3.0, 4.0, 6.6 and 7.5mm


40892 – £ 34 .86 D

5

22TF

Metric Thread Restoring FileFor restoring and cleaning internal or external threads.Thread pitch: 080-100, 175-200, 125-150 and 250-300.Packed in clear plastic tube.


68703 – £ 42 .88 D

6

Re-Threading ToolsExpert Quality, for cleaning out and cutting damaged ormalformed threads in electrical boxes and other similarjobs. Manufactured from high speed steel with precisionground threads and an impact resistant PVC handle.Display packed.

Stock Part Box PriceNo. No. Size Qty each

37923 RT3.5 3.5 x 0.6 – £ 6 .14 D 37924 RT4 4 x 0.7 – £ 6 .14 D

7

7 piece Spark Plug Thread Repair Tool Kit Expert Quality, unique expanding design for thread recovery especially for spark plugs. Allows thread repairfrom the bottom (not the top) of the threaded hole. Satin chrome plated tool steel hardened and tempered.Display packed.

• Contents: 8 x 1.00mm 117mm long x 13mm hex. drive• 10 x 1.00mm, 117mm long x 13mm hex. drive• 12 x 1.25mm, 140mm long x 13mm hex. drive • 12 x 1.25mm, 268mm long x 13mm hex. drive• 14 x 1.25mm, 140mm long x 13mm hex. drive• 14 x 1.25mm, 268mm long x 13mm hex. drive• 18 x 1.50mm, 89mm long x 18mm hex. drive

Stock Part Box PriceNo. No. Description Qty kit/each

04480 SPRT/KIT Tool Kit – £ 123 .16 P 24828 SPRT8 Tool 8 x 1.0mm – £ 16 .26 P 24829 SPRT10 Tool 10 x 1.0mm – £ 16 .26 P 24867 SPRT12 Tool 12 x 1.25mm – £ 16 .26 P 24868 SPRT14 Tool 14 x 1.25mm – £ 16 .26 P 24955 SPRT18 Tool 18 x 1.50mm – £ 16 .26 P

8

THREAD REPAIR KITSSee overleaf on page 414 for morethread repair kits

NEW: SPARE TOOLS AVAILABLE

see table

SEE PRODUCT VIDEOwww.drapertools.com/drapertv

843B

5 piece Screw Extractor SetCoarse spiral pattern with square drive end.Manufactured from carbon steel. Packed in plastic caseon display card.

Contents: one each of size: 1 (3-6mm), 2 (6-8mm), 3 (8-11mm), 4 (11-14mm) and 5 (14-18mm).


42560 – £ 19 .42 D

4

NEW

414



DHCK-KIT

Metric Thread Repair Master KitExpert Quality, comprehensive kit for repairs andrestoration of damaged threads to their originalsize and condition. High quality stainless steelthread inserts provides stronger assemblies wherethere is a tapped hole. The inserts can be easilyplaced using the patented magnetic insert bitholder. Packed in blow mould case with displaysleeve.

Contents: • 5 x HSS twist drills size: 5.5, 6.3, 8.3,10.4 and 12.4mm • 5 x HSS second taps • 5 xtang breaking tools • Interchangeable insertwinder handle • 5 x 1/4" hex. x magnetic screwinsert drivers • 2mm hexagon key • Thread inserts24 size: M5 x 0.8; 15 size: M6 x 1.0; 10 size M8 x1.25; 6 size M10 x 1.5; 5 size: M12 x 1.75

Stock Box PriceNo. Qty per kit

21690 – £ 136 .36 P

NEW

ADHCK-A

Metric Thread Insert Refill PacksExpert Quality, packs of 12 stainless steel threadinserts for use with Draper Metric Insert Kits. Displaypacked.

Stock Coils Box PriceNo. Size p/pack Qty p/pack

21706 M5 x 0.8 12 – £ 3 .94 P 21708 M6 x 1.0 12 – £ 4 .60 P 21709 M8 x 1.25 12 – £ 5 .26 P 21710 M10 x 1.5 12 – £ 6 .28 P 21711 M12 x 1.75 12 – £ 6 .40 P

2

NEW

DHCK-A

Metric Thread Repair KitsExpert Quality, steel inserts restore damaged threadsto their original size and condition in any material.Provides stronger assemblies where there is a tappedhole. Eliminates thread wear, corrosion, galling, seizingand rust. Display packed.

Contents: high speed steel drill; insertion mandrel; highspeed steel tap; thread inserts

Stock Coils Box PriceNo. Size p/pack Qty per kit

21714 M5 x 0.8 3 – £ 11 .08 P 21715 M6 x 1.0 3 – £ 14 .36 P 21721 M8 x 1.25 3 – £ 17 .20 P 21723 M10 x 1.5 3 – £ 21 .58 P 21744 M12 x 1.75 3 – £ 28 .36 P

3

H30PS

Metric HSS Cobalt Twist Drills forMetric Thread Repair KitsManufactured to DIN338 and ISO235/1 SpecificationsExpert Quality, a selection of metric-sized high speedsteel straight shank drills (with 5% cobalt) for specificallydrilling out damaged threads prior to insertion of aninsert. The addition of cobalt to HSS adds strength andwear resistance for longer life. For use with MetricThread Repair Kits. Display packed.

Stock Drill For Box PriceNo. Diameter Thread Qty each

76093 4.1mm 4 x 0.7 – £ 2 .82 D 76094 5.2mm 5 x 0.8 – £ 3 .52 D 76095 6.2mm 6 x 1.0 – £ 3 .90 D 76096 7.2mm 7 x 1.0 – £ 5 .46 D 76097 8.3mm 8 x 1.25 – £ 7 .24 D 76098 9.3mm 9 x 1.25 – £ 8 .72 D 76099 10.3mm 10 x 1.5 – £ 10 .96 D 76100 11.3mm 11 x 1.5 – £ 12 .90 D 76101 12.4mm 12 x 1.75 – £ 16 .98 D

4

NEW

NEW

NEW

NEW

NEW

DAVE SAYSThis is a selection of ournew range of industrialcompounds forengineering applications.

See page 161 for the fullrange.

DAVESAYS


1

NEW

DTL222

D222 Thread LockIdeal for low-strength thread lockingon adjusting screws, countersunkhead screws and set screws. Verygood on low strength metals whichcould break during disassembly. Lowstrength break away - 6Nm. Display packed.

Stock Pack Box PriceNo. Size Qty each

24657 50ml 20 £ 14 .46 D

5

DNL243

D243 Nut LockMedium strength (16Nm break away) oil tolerant designfor direct application onto parts where a light oily filmexists or where surrounding parts contamination is aproblem. Display packed.


24660 50ml 20 £ 14 .46 D

6

DSL270

D270 Stud LockHigh strength (40Nm break away)general purpose adhesive for permanent threadedassemblies. Secures studs up to 13mm, sealing againstleakage and corrosion. Chemical resistant while alsoresisting fuels, lubricants and most industrial liquids andgases. Display packed.


24659 50ml 20 £ 14 .46 D

7

DBSR638

D638 Bush andSleeve RetainerDesigned to give high strengthretention under cyclic loading. Retainsfull strength and won’t suffer fatigue under load stress.Suited for structural components such as cylindricalparts under load, keys, splines, and structural tubing.Display packed.


24667 50ml 20 £ 15 .58 D

8

DBF641

D641 Bearing FitSingle part anaerobic securingcompound, designed for fittingcylindrical metal assemblies and cureswhen confined between the parts. Willsecure all types and sizes of bearings,shafts and cylindrical parts. Display packed.


24662 50ml 20 £ 15 .58 D

9

REVISED DEALER

CODES APPLY TO

ITEMS 1, 2 & 3

ON THIS PAGE

STOCKIST INFO

end side

flat

415

GENERAL ENGINEERING


Engineers Bench VicesQuality cast iron body with steel screw and handle.Hardened carbon steel interchangeable jaws. Cartonpacked.

Stock Part Box PriceNo. No. Jaw Width Qty each

45230 BV100/L 100mm – £ 73 .62 D 45231 BV125/L 125mm – £ 97 .46 D 45232 BV150/L 150mm – £ 136 .28 D

1

BV2/L

Engineers Bench VicesGood quality grey cast iron with trapezoidal threadleadscrew. Hardened carbon steel interchangeable jaws.Carton packed.

Stock Box PriceNo. Jaw Width Qty each

44506 100mm – £ 71 .22 D 45783 150mm – £ 139 .28 D

2

BV-SB2

Swivel Bases for EngineersBench VicesSwivel bases for use with Engineers Bench Vices StockNos. 44506 and 45783. Manufactured from good qualitygrey cast iron with three fixing legs and two clampingblocks. Sold loose.

Stock Box PriceNo. For Vice Qty each

45784 For Stock No. 44506 – £ 15 .38 D 45785 For Stock No. 45783 – £ 18 .16 D

3

Soft Jaws for Engineers VicesExpert Quality, aluminium with heavy duty soft rubberface to prevent marking. Supplied with heavy dutymagnets which stick to the face of the vice jaws. Displaypacked.

Stock Part Box PriceNo. No. Size Qty per pair

14178 SJ100B 100mm – £ 6 .06 D 14180 SJ150B 150mm – £ 9 .00 D

4

HV100

36mm Hand ViceHand held vice for the secure clamping of componentparts prior to grinding, drilling, etc. Carton packed.

Stock Box PriceNo. Jaw Opening Qty each

30785 19mm – £ 9 .88 D

51709T

75mm Bench ViceCast iron with serrated curved jaws. Bench clampingscrew 40mm capacity manufactured from zinc platedcarbon steel. Display packed. Display carton.

Stock Jaw Box PriceNo. Opening Qty each

38267 58mm – £ 38 .70 D

6

VAC10/L

75mm Vacuum ViceVersatile swivel vice with powerful suction base whichfixes to any smooth surface. Swivelling head allowsmany varied positions. V grooved jaws for holdingcylindrical and irregular shapes. Supplied withremovable soft rubber safety jaw covers. Display carton.

Stock Jaw Box PriceNo. Opening Qty each

45245 70mm – £ 47 .50 D

7

DPV70/B

‘Quick Action’ Drill Press ViceManufactured from cast aluminium with hardened jaws.‘Quick action’ release at rear of vice allows jaws to beopened quickly. Display carton.

Stock Jaw Jaw Box PriceNo. Width Opening Qty each

40390 70mm 67mm – £ 29 .66 D

8 DPV100/3

3 Way Drill Press ViceExpert Quality, with three accurately ground mountingsurfaces for drilling holes at 90°. Precision ground jaws.Carton packed.

Stock Jaw Jaw Box PriceNo. Width Opening Qty each

64585 85mm 100mm – £ 93 .80 D

9

DRILL PRESSVICES

416



4920

300mm Heavy DutySoft Grip Hacksaw FrameExpert Plus Quality, traditional pattern with anadjustable frame for 300mm blades. Lever on saw bowreleases blade for easy change. Aluminium handle withsoft grip for user comfort. Frame has two sets of bladespigots which allows straight or 45° cutting. Suppliedwith a 300mm HSS blade. Display packed.


05719 – £ 34 .38 D

1

4917

300mm Heavy DutySoft Grip Hacksaw FrameExpert Quality, traditional pattern with an adjustableframe for 300mm blades. Soft grip handle. Frame hastwo sets of blade spigots which allows straight or 45°cutting. Supplied with a 300mm HSS blade. Displaypacked.


77170 6 £ 27 .34 D

2

D4917

300mm Soft GripHacksaw FramesExpert Quality, traditional pattern with an adjustableframe for 300mm blades. Facility on base of handleallows user to de-tension blade. Frame has two sets ofblade spigots which allows straight or 45° cutting. Softgrip handle. Complete with a 300mm bi-metal blade.Multiples of six only, supplied in countertop display.

Minimum order six or multiples thereof


45867 6 £ 27 .34 D

3

4918

300mm Hacksaw FrameExpert Quality, traditional pattern with anadjustable chrome plated tubular frame for 300mmblades. Frame has two sets of blade spigots whichallows straight or 45° cutting. Can be used as arod saw. Enamelled aluminium handle. Suppliedwith a 300mm HSS blade. Display packed.


31131 6 £ 25 .10 D

4

4919

300mm Heavy DutySoft Grip Hacksaw FrameTraditional pattern with an adjustable frame for 300mmblades. Soft grip handle. Frame has two sets of bladespigots which allows straight or 45° cutting. Suppliedwith a 300mm HSS blade. Display packed.


31233 – £ 21 .00 D

5

4916

300mm Steel Hacksaw FrameGeneral purpose with an adjustable round steel tubebow frame for 250mm and 300mm blades. Shapeddiecast handle. Supplied with a 250mm carbon steelblade. Sold loose.


18935 5 £ 19 .58 D

6

736/2

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Display packed two blades percard.

Order number of cards required. (2 blades per card)

Stock Box PriceNo. TPI Qty per card

19344 18 – £ 4 .82 D 19345 24 – £ 4 .82 D 38265 32 – £ 4 .82 D

7

736/10

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Display packed ten blades percard.


Stock Box PriceNo. TPI Qty per card

19347 18 – £ 21 .70 D 19348 24 – £ 21 .70 D 38266 32 – £ 21 .70 D

8

736/50

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Packed 50 blades to plastic box.

Order number of boxes required. (50 blades per box)

Stock Box PriceNo. TPI Qty per box

19349 18 – £ 101 .86 D 19350 24 – £ 101 .86 D 29807 32 – £ 101 .86 D

9

X2 BLADES

X10 BLADES

X50 BLADES

DAVE SAYSHACKSAW BLADES -Choosing hacksawblades: Always use theblades that have asmany teeth as possiblein contact with materiale.g. angle iron = 32TPI,square section = 18TPIBlade teeth shouldalways point forward, or as shown by thechevrons on the blades. Our Bi-metal bladescombine the longevity of HSS and the flexibilityof carbon steel.

DAVESAYS


HACKSAW BLADE TEETH SHOULD ALWAYSPOINT FORWARD - LOOK FOR THE DIRECTIONOF THE CHEVRONS ON OUR BLADES

417

GENERAL ENGINEERING


735

300mm Flexible CarbonSteel Hacksaw BladesGeneral purpose blades for cutting mild steel or soft nonferrous metal.Packed five blades - two 18 TPI and three 24 TPI - on display card.


Stock Box PriceNo. Qty per card

74118 6 £ 4 .10 D

1

737

300mm Tungsten Carbide Edge Hacksaw BladeBlade with tungsten carbide grit cutting edge for cutting ceramic tiles, glassware, marble and other materials. Fits allconventional hacksaw frames. Display packed.


19328 – £ 4 .46 D

2

222JH

Junior HacksawPlated steel frame with finger guard. Supplied withblade. Display packed.


49650 6 £ 2 .58 D

3

222JHPC

Junior Hacksaw with PowderCoated FramePlated steel frame with powder coating and finger guard.Supplied with blade. Display packed.


51996 6 £ 3 .42 D

4

1309

Mini SawSpecially designed for small cutting jobs on metal,wood, etc., where space is limited. Metal frame andshaped plastic handle to improve both operator comfortand control. Supplied with blade. Display packed.


12607 6 £ 4 .24 D

5

JHF/P12

Mini Saw with Powder Coated FrameSpecially designed for small cutting jobs on metal,wood, etc., where space is limited. Powder coated metalframe with shaped impact resistant plastic handle toimprove both operator comfort and control and bladetensioner. Supplied with blade. Display packed.


69292 10 £ 6 .70 D

6

1310

Soft Grip Mini Saw withPowder Coated FrameSpecially designed for small cutting jobs on metal,wood, plastics etc., where space is limited. Powdercoated metal frame with shaped soft grip handle for usercomfort and control and blade tensioner. Supplied withblade. Display packed.


31234 – £ 8 .28 D

7

312JH/EXP

150mm Junior Hacksaw BladesManufactured to BS6271Expert Quality, general purpose cutting blades withpinned ends. Will fit all junior hacksaw frames. Packedten blades on display card or in bags of 100 blades.

Order number of cards/bags required. (see table)

Stock Box PriceNo. Blade Quantity Qty per qty.

69305 10 blades per card – £ 3 .00 D 69306 100 blades per bag – £ 22 .50 D

8

312JH

150mm Junior Hacksaw BladesGeneral purpose cutting blades with pinned ends. Will fitall junior hacksaw frames. Packed ten blades to displaycard.


Stock Blade Box PriceNo. Blade Type Qty Qty p/card

11237 Metal Cutting 10 per card 5 £ 2 .60 D 39007 Wood Cutting 10 per card – £ 2 .58 D

9

X5 BLADES -18tpi and 24tpi

X10 BLADES

MINI HACKSAWS

DAVE SAYSENGINEERS COLDCHISELS - Unlikebuilders cold chisels,which are designed to beused on brick and stone,these engineers chiselsand punches are madeof chrome vanadiumsteel for prolonged useon metal. The head isseparately hardened to avoid excessive‘mushrooming’, although this is a necessaryfeature to avoid chipping.

DAVESAYS


418



97

Octagonal Flat Cold ChiselsManufactured to DIN 7254B and GS SpecificationsExpert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.Sold loose.

Stock Blade Box PriceNo. Length Width Qty each

51538 100mm 10mm – £ 8 .02 D 51546 125mm 12mm – £ 8 .72 D 51554 150mm 15mm – £ 9 .34 D 51570 175mm 20mm – £ 11 .12 D

1

95

Flat Cold ChiselsManufactured to DIN 6453Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.Sold loose.


51588 100mm 16mm – £ 7 .78 D 51596 125mm 18mm – £ 8 .66 D 51603 150mm 20mm – £ 9 .48 D 51611 180mm 22mm – £ 11 .82 D 51629 200mm 25mm – £ 12 .96 D 51637 250mm 28mm – £ 15 .44 D

2

109

Flat Cold Chiselwith Hand GripManufactured to DIN 6453Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.With heavy moulded impact absorbing hand protectiongrip. Sold loose.


11152 300mm 32mm – £ 24 .68 D

3

104

Splitting ChiselExpert Quality, special air hardened chrome vanadiumsteel for long life. The cutting edge is accurately ground,with specially tempered head. Display packed.


13278 240mm 25mm – £ 15 .54 D

4

119

Octagonal Parallel Pin PunchesExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered heads. Sold loose.

Stock Tip Box PriceNo. Length Diameter Qty each

51645 150mm 2.0mm – £ 6 .10 D 51653 150mm 2.5mm – £ 6 .10 D 51661 150mm 3.0mm – £ 6 .10 D 51679 150mm 3.5mm – £ 6 .10 D 51687 150mm 4.0mm – £ 6 .10 D 51695 150mm 5.0mm – £ 6 .10 D 51702 150mm 6.0mm – £ 6 .10 D 51710 150mm 8.0mm – £ 7 .00 D

5

119/5

5 piece 150mm OctagonalParallel Pin Punch SetExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered head. Display packed.

Contents: Tip diameters of 3.0, 3.5, 4.0, 5.0 and 6.0mm.


13041 – £ 30 .96 D

6

119K

6 piece 150mm OctagonalParallel Pin Punch SetExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered head. Supplied complete in steelmagazine type case. Carton packed.

Contents: Tip diameters of 2, 3, 4, 5, 6 and 8mm.


74712 – £ 57 .70 D

7

99L

Long Taper Pin PunchesExpert Quality, engineer’s pattern long taper punches,manufactured from special air hardened chromevanadium steel for long life. Display packed.


13415 200mm 3mm 6 £ 10 .58 D 13416 225mm 5mm 6 £ 12 .66 D 13417 250mm 6mm 6 £ 15 .92 D 13418 300mm 8mm 4 £ 20 .32 D

8

100HB

Octagonal Centre PunchesManufactured to DIN 6458Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The tips areaccurately ground with specially tempered heads. Soldloose.


51752 120mm 4mm 10 £ 3 .70 D 51760 120mm 5mm 10 £ 3 .70 D 51778 150mm 5mm 10 £ 5 .76 D

9

5HB

5 piece Chisel and Punch SetExpert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesand tips are accurately ground, with specially temperedheads. Packed in plastic holder on display card.

Contents:• flat cold chisel: 20 x 150mm• 2 parallel pin punches: 3 x 150 and 5 x 150mm• taper pin punch: 3 x 120mm• centre punch: 4 x 120mm


13042 – £ 36 .76 D

10

419

GENERAL ENGINEERING


ECSG

Soft Grip Flat Cold ChiselsExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.


44932 165mm 12mm 12 £ 4 .34 D 44933 175mm 16mm 12 £ 5 .26 D 44934 175mm 20mm 6 £ 6 .16 D 44935 190mm 22mm 6 £ 8 .68 D 44936 210mm 26mm 6 £ 9 .28 D

1

PPSG

Soft Grip Parallel Pin PunchesExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.


44925 165mm 2mm 12 £ 3 .70 D 44926 175mm 3mm 12 £ 3 .98 D 44927 185mm 4mm 12 £ 4 .22 D 44928 200mm 5mm 12 £ 4 .34 D 44929 200mm 6mm 12 £ 4 .94 D 44930 180mm 8mm 12 £ 5 .28 D 44931 180mm 10mm 6 £ 6 .66 D

2

CPSG

Soft Grip Centre PunchesExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.


44916 165mm 3mm 12 £ 3 .58 D 44917 175mm 4mm 12 £ 3 .84 D 44918 175mm 5mm 12 £ 4 .34 D

3

CPSG/3

3 piece Soft Grip Centre Punch SetExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.

Contents: 3 x 165mm, 4 x 175mm and 5 x 175mm


44944 5 £ 12 .00 D

4

PPSG/6

6 pieceSoft GripParallel PinPunch SetExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.Contents: 2 x 165; 3 x 175; 4 x 185; 5 x 200, 6 x 200 and8 x 210mm


44945 – £ 40 .12 D

5

COMPSG/6

6 piece Soft Grip Chiseland Punch SetExpert Quality, chrome vanadium steel hardened andtempered with a chemically blacked finish. Soft griphandle for user comfort. Display packed in plastic holder.

Contents: • 2 cold chisels: 12 x 160 and 16 x 175mm • 2long taper punches: 3 x 175 and 4 x 185mm • centrepunch: 4 x 175mm • parallel pin punch: 4 x 185mm


44946 – £ 36 .04 D

6

622/3/PP

3 piece 125mm Nailset, CentrePunch and Parallel Pin Punch SetExpert Quality, chrome vanadium steel hardened andtempered with sandblasted finish. Display packed inplastic holder.

Contents: • Cupped nailset 3mm dia. tip • Centre punch3mm dia. tip • Parallel pin punch 5/16” tip dia.


72041 – £ 8 .68 D

7

CP4

4 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with achemically blacked finish and plastic grips. Displaypacked.

Contents: • cold chisel: 13 x 150mm • parallel pin punch:3 x 150mm • taper pin punch: 5 x 150mm • centrepunch: 10 x 150mm


18161 6 £ 15 .36 D

8

CP7NP

7 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with achemically blacked finish and plastic grips. Supplied instorage roll. Display packed.

Contents: • 3 cold chisels: 10, 13 and 16 x 150mm• 2 taper punches: 3 and 4 x 150mm • centre punch: 10x 150mm • parallel pin punch: 4 x 150mm


23187 4 £ 19 .72 D

9

CP12NP

12 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with a chemically blacked finish and plastic grips.Supplied in storage roll. Display packed.

Contents: • 4 cold chisels: 13 x 150, 16 x 180, 19 x 190 and 22 x 205mm • taper punch: 5 x 255mm• 2 parallel pin punches: 4 and 6 x 150mm • 2 parallel taper pin punches: 3 and 6 x 150mm • centrepunch: 6 x 150mm • point chisel: 150mm long • cross cut chisel: 150mm long


26557 – £ 37 .84 D

10

DAVE SAYSAll the heads of our cold chisels are chamfered to slow downthe formation of the mushroom shape caused by hammeringand is left soft to withstand hammer blows.

DAVESAYS


NEW

420



GT808

125mm Automatic Centre PunchHigh grade steel tip and hardened point. Chrome platedknurled brass body. Display packed.


14158 4 £ 11 .14 D

1 GT807

125mm Automatic Centre PunchExpert Quality, heavy duty spring-loaded hardenedsteel point. Adjustable striking force. Display packed.


13612 4 £ 12 .32 D

2

622

100mm Cupped NailsetsSquare section striking head with knurled body andpolished end. Manufactured from carbon steel hardenedand tempered. Display packed.

Stock Box PriceNo. Tip Diameter Qty each

84498 2.5 6 £ 2 .90 D 84480 3.0 6 £ 2 .90 D

3

622/4

4 piece Set of 100mm Cupped NailsetsSquare section striking head with knurled body andpolished ends. Carbon steel hardened and tempered.Display packed.

Contents: 1.5, 2.5, 3.0 and 5.0mm.


35480 10 £ 7 .74 D

4 623

100mm Centre PunchesSquare section striking head with knurled body andpolished ends. Manufactured from carbon steelhardened and tempered. Display packed.


84464 3mm 6 £ 2 .78 D 84456 4mm 6 £ 2 .78 D 10750 5mm 6 £ 2 .78 D

5 622/623

2 piece 100mm Cupped Nailset andCentre Punch SetSquare section striking head with knurled body andpolished ends. Carbon steel hardened and tempered.Display packed.

Contents: 3mm dia. nailset and centre punch


13509 4 £ 3 .82 D

6

55P

200mm Parallel Pin PunchesLong pattern 90mm parallel drive. Display packed.These punches are true imperial sizes.


19675 1/8” – £ 4 .32 D 19676 3/16” – £ 4 .32 D 19677 1/4” – £ 4 .32 D 19678 5/16” – £ 4 .32 D 19679 3/8” – £ 4 .32 D

7

5P

5 piece 200mm Parallel Pin Punch SetLong pattern with 90mm parallel drive. Display packed instorage wallet.

Contents: 1/8, 3/16, 1/4, 5/16 and 3/8” dia.These punches are true imperial sizes.


19674 – £ 21 .20 D

8

HP6

6 piece Hollow Punch SetManufactured from quality carbon steel hardened,tempered and enamel painted. Specifically designed tocut clean holes in leather, paper, plastic, wood, etc.Supplied in tool roll. Display packed.

Contents: 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2" dia.These punches are true imperial sizes.


25993 – £ 14 .66 D

9

GARAGE WORKSHOPSThe majority of the tools shown in this ‘Engineering’section can be used in the garage workshop.

Thread repair kits shown on page 413 are especiallyuseful for thread recovery on spark plugs.

Other useful tools include hand files, dial testindicators and vices for the workbench.

See Section 2 to see our whole automotive tool range.

Tool Chests are shown in Section 7- Storage and Handling.

421

GENERAL ENGINEERING


NF6/SG

6 piece 150mm Soft GripNeedle File SetNo. 2 cut files, hardened and tempered. Two-tone soft-grip handles. Display packed in plastic case.

Contents: flat parallel, flat taper, half round, three square,square and round files.


47816 6 £ 8 .92 D

1 DF6/SG

6 piece 150mm Soft Grip DiamondNeedle File SetDiamond coated 150 grit. Two-tone soft-grip handles.Display packed in plastic case.

Contents: flat parallel, flat tapered, round, half round,square and three square.


47817 6 £ 14 .36 D

24885/10D

10 piece 140mmDiamond Needle File SetExpert Quality set, chromium plated and diamondcoated 150 grit. Moulded plastic handles. Display packedin plastic case.

Contents: flat parallel, flat tapered, round, half round,square, three square, oval, crossing, barrette and knife


36326 – £ 36 .38 D

3

4883/6C

6 piece 140mm Needle File SetMoulded plastic handles. Display packed in plasticstorage wallet.

Contents: flat parallel; flat taper; half round; round; squareand three square files


36324 4 £ 6 .88 D

44884/12C

12 piece 140mm Needle File SetMoulded plastic handles. Display packed in plasticstorage wallet.

Contents: flat hand; flat taper; joint; taper round; halfround; square; three square; oval; crossing; crochet;barrette and knife


36325 – £ 16 .34 D

5NF/SET

6 piece 140mm Soft GripNeedle File SetNo. 2 cut files, high carbon steel hardened andtempered with sand blasted finish. Two-tone soft-griphandles. Display packed in plastic storage wallet.

Contents: flat parallel; flat taper; half round; three square;square and round files.


63635 10 £ 7 .80 D

6

160mm Second Cut Needle FilesFor intricate work, Manufactured from high carbon/chrome steel, hardened and tempered to HRC 62-64 files.Sold in boxes of 12 files.

63391 NF Second Flat Parallel – £ 16 .92 D

63392 NF Second Flat Taper – £ 16 .92 D

63393 NF Second Half Round – £ 16 .92 D

63394 NF Second Three Square – £ 16 .92 D

63395 NF Second Square – £ 16 .92 D

63396 NF Second Round – £ 16 .92 D

Stock Part Box Price Cut Type No. No. Qty per box

FILE HANDLESHandles for needle andengineers files areshown on page 423.

SECOND CUT NEEDLE FILES

422



60212 150mm (6”) 12 – £ 47 .18 D 60213 200mm (8”) 12 – £ 60 .54 D 60214 250mm (10”) 12 – £ 81 .22 D 60215 300mm (12”) 6 – £ 52 .96 D

DAVE SAYSFILES - This range of high quality files, are suitable for the industrialengineer. The files are manufactured from good quality carbon chrome steelcorrectly hardened and tempered, conforming to the recognised British standard.Always use the correct file for the job in hand - bastard cut for fast metalremoval, second cut for general filing and smooth cut for a fine finish.Needle files are used for detailed work - depending on the type of file they canbe used for metal or wood to remove burrs, irregularities, enlarging holes or slotsand for sharpening saws.

DAVESAYS


SAFETYINFORMATIONNever use a filewithout a handle.Suitable handles areshown on page 423.

FLAT FILESHALF ROUNDFILES

HAND FILES

HF/3

Hand Files - Smooth CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped in rustpreventative oil.

Order number of boxes required. (Sold in boxes withouthandles)

Stock Files Box PriceNo. Length per box Qty per box

3

HRF/3

Half Round Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60227 150mm (6”) 12 – £ 66 .14 D 60228 200mm (8”) 12 – £ 84 .72 D 60229 250mm (10”) 12 – £ 116 .14 D 60230 300mm (12”) 6 – £ 71 .24 D

6 FF/3

Flat Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60242 150mm (6”) 12 – £ 47 .24 D 60243 200mm (8”) 12 – £ 60 .12 D 60244 250mm (10”) 12 – £ 81 .24 D 60245 300mm (12”) 6 – £ 52 .66 D

9

HF/2

Hand Files - Second CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped in rustpreventative oil.



60207 150mm (6”) 12 – £ 44 .62 D 60208 200mm (8”) 12 – £ 57 .42 D 60209 250mm (10”) 12 – £ 76 .10 D 60210 300mm (12”) 6 – £ 51 .16 D

2

HRF/2

Half Round Files - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60222 150mm (6”) 12 – £ 62 .68 D 60223 200mm (8”) 12 – £ 81 .24 D 60224 250mm (10”) 12 – £ 106 .96 D 60225 300mm (12”) 6 – £ 67 .34 D

5 FF/2

Flat File - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60237 150mm (6”) 12 – £ 43 .88 D 60238 200mm (8”) 12 – £ 57 .96 D 60239 250mm (10”) 12 – £ 76 .22 D 60240 300mm (12”) 6 – £ 51 .88 D

8

HF/1

Hand Files - Bastard CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped in rustpreventative oil.



60202 150mm (6”) 12 – £ 40 .60 D 60203 200mm (8”) 12 – £ 51 .02 D 60204 250mm (10”) 12 – £ 69 .92 D 60205 300mm (12”) 6 – £ 46 .34 D

1

HRF/1

Half Round Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60217 150mm (6”) 12 – £ 55 .86 D 60218 200mm (8”) 12 – £ 76 .78 D 60219 250mm (10”) 12 – £ 95 .00 D 60220 300mm (12”) 6 – £ 62 .30 D

4 FF/1

Flat Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60232 150mm (6”) 12 – £ 41 .56 D 60233 200mm (8”) 12 – £ 50 .38 D 60234 250mm (10”) 12 – £ 69 .28 D 60235 300mm (12”) 6 – £ 46 .24 D

7

FILE PROFILES

ROUND FILES FARMERSOWN FILES

423

GENERAL ENGINEERING


RF/1

Round Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60248 150mm (6”) 12 – £ 41 .50 D 60249 200mm (8”) 12 – £ 48 .00 D 60250 250mm (10”) 12 – £ 61 .58 D

1

RF/2

Round Files - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60254 150mm (6”) 12 – £ 47 .40 D 60255 200mm (8”) 12 – £ 54 .58 D 60256 250mm (10”) 12 – £ 68 .42 D

2

RF/3

Round Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.



60258 150mm (6”) 12 – £ 47 .36 D 60259 200mm (8”) 12 – £ 60 .38 D 60260 250mm (10”) 12 – £ 72 .52 D

3

CSF

Chainsaw Files (sold loose)Order number of boxes required. (boxes of 12 withouthandles)

Stock Box PriceNo. Length Diameter Qty per box

60296 150mm (6”) 4mm (5/32”) – £ 29 .40 D 60297 200mm (8”) 5mm (3/16”) – £ 29 .66 D 60298 200mm (8”) 5.5mm (7/32”) – £ 29 .66 D

5

DESFP

175mm (7") Double Ended Saw File(display packed)Manufactured in accordance with BS498:1990For sharpening non hardpoint saw teeth. Supplied withhandle (unassembled). Carbon chrome steel hardenedand tempered with rust preventative finish and dipped inrust preventative oil. Display packed.


60312 – £ 5 .46 D

6

DESF

175mm (7") Double Ended Saw File(sold loose)Order number of boxes required. (boxes of 12 withhandles)

Stock Files Box PriceNo. per box Qty per box

60311 12 – £ 53 .54 D

7

FOP

Farmers Own Files (display packed)Manufactured in accordance with BS498:1990Single cut files to give fine/sharp finish to garden tools.Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Self handled with hang hole. Display packed.

Stock Box PriceNo. Length Qty each

60306 200mm (8”) – £ 5 .52 D 60308 250mm (10”) – £ 7 .70 D

8

FO

Farmers Own Files (sold loose)Manufactured in accordance with BS498:1990Single cut files to give fine/sharp finish to garden tools.Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Self handled with hang hole.

Order number of boxes required (boxes of 12)


60305 200mm (8”) 12 – £ 59 .72 D 60307 250mm (10”) 12 – £ 74 .64 D

9

563A

Plastic File HandlesFor use with Draper files and other manufacturersfiles. Display packed.


29524 80mm – £ 0 .80 D 29525 93mm – £ 0 .84 D 29526 110mm – £ 0 .94 D

10

563

Hardwood File HandlesSmoothly finished with steel ferrule. For use withDraper files and other manufacturers files. Soldloose.


33487 75mm – £ 1 .04 D 33502 100mm – £ 1 .26 D 33528 125mm – £ 1 .34 D 33544 150mm – £ 1 .62 D

11

CHAINSAWFILES

CSFP

150mm Chainsaw File (display packed)Manufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Display packed.

Stock Box PriceNo. Diameter Qty each

60766 4mm (5/32”) – £ 3 .24 D

4

SAFETY INFORMATIONNever use a file without a handle.

FILES - TRANSIT DAMAGEAs a result of potential damage to file teethduring transit, we regret that file quantities inboxes (usually 12) are fixed and cannot bebroken down.

FILE PROFILES

FILE PROFILE

DOUBLEENDED SAWFILES

424



8106B/3

3 piece 200mm Soft Grip EngineersFile SetHigh carbon steel, hardened and tempered with soft griphandles incorporating hang hole. Display packed.

Contents: flat, half round and round


44963 2 £ 19 .64 D

1

8106B/4

4 piece 200mm Soft Grip EngineersFile SetHigh carbon steel, hardened and tempered with soft griphandles incorporating hang hole. Display packed.

Contents: flat, half round, round and three square


44962 2 £ 26 .72 D

2

8106B/8

8 piece 200mm Soft Grip EngineersFile and Rasp SetHigh carbon steel, hardened and tempered with soft griphandles incorporating hang hole. Supplied in tool roll.Display packed.

Contents: flat, hand, half round, round, square, threesquare files, half round rasp and round rasp.


44961 4 £ 46 .92 D

3

WFS4

4 piece 100mm Warding File SetPlastic handles. Display packed.

Contents: flat parallel, round, square and three square.


14184 6 £ 6 .80 D

4

WFS6

6 piece 100mm Warding File SetPlastic handles. Display packed.

Contents: flat parallel, flat taper, round, square, threesquare and half round.


14185 6 £ 11 .72 D

5 FCB

210mm File Cleaning BrushFor the cleaning of files, etc. Filled with file card steelwire 360 points per square inch. Brush width 25mm.Filled Length: 90mm. Beechwood handle. Displaypacked.


34477 – £ 4 .48 D

7

44952 8106B Engineers, flat 6 £ 6 .04 D

44953 8106B Engineers, hand 6 £ 6 .04 D

44954 8106B Engineers, half round 6 £ 8 .44 D

44955 8106B Engineers, round 6 £ 6 .00 D

44956 8106B Engineers, square 6 £ 7 .82 D

44957 8106B Engineers, three square 6 £ 6 .78 D

44958 8106B Cabinet, half round rasp 6 £ 9 .32 D

44959 8106B Cabinet, round rasp 6 £ 8 .82 D

44960 8106B Cabinet, flat rasp 6 £ 10 .44 D

Stock Part Box Price

No. No. Type, description Qty each

200mm Soft Grip Engineers Files and Rasps

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole. Improved tooth profile forincreased performance.

C200F

200mm Carbide Grit Flat FileCombination coarse and fine carbide grit file with plastichandle. Suitable for forming or removing stock from mostmaterials including plastics, fibreglass, plaster,laminates, nonferrous metals, etc. Display packed.NB: This file is not suitable for use on ferrous metals.


29388 – £ 13 .18 D

6

FILE HANDLESHandles for needle and engineers files are shownon page 423.

NEEDLE FILESSee page 421 for a selection of needle files and sets

425

GENERAL ENGINEERING


563B

110mm Swiss File HandleFor use with needle files. Knurled hand-tightened chuckretains file in handle. Display packed.


29523 – £ 3 .28 D

1

DB4

3 piece Deburring and ChamferingTool SetFor the removal of swarf and burrs from machinedcomponents leaving a clean hole. The 10.5mm diametercountersink is ideal when a chamfered edge is required.The deburring blade is suitable for use in steel,aluminium and plastic. Display packed.


71368 – £ 29 .10 D

2

MPH SET

4 piece Mini Hook and Pick SetDesigned to ease the removal of ‘O’ rings, split pins,seals and bushes in various automotive and engineeringapplications. Blades stainless steel hardened andtempered with impact - resistant handles. Displaypacked.

Contents: Awl, Clevis - pin remover, ‘L’ and ‘V’ hooks


35099 4 £ 12 .00 D

3

LS

Letter Stamp SetsSets of 26 capital letter stamps manufactured from alloytool steel, hardened and tempered with a black finish.Packed in plastic box.

Stock Letter Box PriceNo. Height Qty per set

37333 1/8” – £ 24 .10 D 37334 3/16” – £ 37 .24 D 37335 1/4” – £ 40 .36 D

4

NS

Number Stamp SetsSets of numbers 0-9 manufactured from alloy tool steel,hardened and tempered with a black finish. Packed inplastic box.

Stock Number Box PriceNo. Height Qty per set

37336 1/8” – £ 9 .32 D 37337 3/16” – £ 12 .96 D 37338 1/4” – £ 14 .84 D

5

ANV

4.5kg AnvilSingle bick cast iron anvil, bolt down pattern. Greycast iron. Oblong working surface 120 x 65mm.Display carton.


35481 – £ 38 .78 D

6

DAVE SAYSThese letter and numberstamp sets are ideal formarking engineerstemplates and otherheavy industrialmachines for securitypurposes. Other usesinclude nameplates andother personalpossessions. The alloy tool steel is of the highestquality and will last for many years.

DAVESAYS


StationaryPower Tools

Section 10

Welding Tools

Section 10

Compressors & Air Tools

Oil-free, low noise, beltdriven and direct drive compressors.Composite body and conventional air toolscomplemented by appropriate air line fittings.

Section 10

Pillar drills, saws,lathes, sanding/grinding machines,vacuum cleaners,pressure washers,generators andspace heaters.

ARC, MIGand TIGweldingmachines,helmets,shrouds,gases andmuch more!

POWER TOOLSWe have an extensive range ofquality power tools that includesthe following product groups...

Documents

engineering - Mod-Fixmodfix.com/assets/products/Engineering.pdf · DAVE SAYS All our Draper Expert ... American National Thread UNC-UNF, in the range 4-42TPI. ... 10 piece Metric