Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
E-mai l : fpssa les@f ike . com
FIKE GLOBAL MANUFACTUrING, SALES AND SErvICE
P r E S S U r E r E L I E F A N D A C T I v A T I O N
EnginEErEd SOLUTiOnS
CUSTOM ENGINEErED
PrESSUrE rELIEF AND
ACTIvATION SOLUTIONS
innOvative design prOcessWhen designing your custom product, we gather as much information about the application as possible to determine the best solution. Fike engineers and application specialists consider many important factors such as type of application, operating conditions, inlet/outlet configurations, rupture disc specifications, and special processes so that we can build the right solution to fit your needs.
Due to the critical nature of some applications, special testing procedures and equipment may be required to accurately simulate actual conditions or to investigate alternative scenarios.
quality standardsFike provides products and services that meet or exceed customer and industry specifications/standards. We are committed to continual improvements in all areas of our business to maintain the highest level of customer satisfaction in the industries we serve. fike products are registered and certified by recognized third party organizations, including:
• ISO 9001:2000• EN9100 Aerospace Series (Technically equivalent to AS9100/JIS9100)• NADCAP (SAE AS7003) Welding• ASME Section vIII Appendix 10• EU Directive (97/23/EC) Annex III, Module H/H1• EU Directive (94/9/EC) Annex Iv
Fike is dedicated to producing quality
products for all your pressure relief
and activation needs. When your
application calls for a unique or
custom solution, Fike has a team of
professionals who will engineer a
solution to meet your requirements.
customizable designs, a wide range
of materials and extensive rupture
disc engineering expertise, make
Fike uniquely qualified for building
the precise products for your sealing,
venting, small space, activation,
pressure relief valve protection or other
special requirements. Fike has the
quality process in place to back our
varied products, suitable for many
uses and industries.
design expertise,
prOduct KnOWledge,
extensive Manufacturing
and testing capabilities
translate intO cOMplete
custOMer satisfactiOn
fOr MOre tHan 60 years
needs
Customer needs
defined
Fike design team evaluates options
and provides recommendations
evALuAtionApprovAL i
design
testing
mAnuFActuring
Customerapprovesconcept
Fike creates drawings and
supporting procedures
Design Qualification Testing (DQT) /
First Article Review (if required)
Customer’sfinal
approvalFike
manufacturesproduct
EnginEErEd SOLUTiOnS
Please use the Engineered Product Specification Form to provide the appropriate information about your application.
FiKE EnginEErEd SOLUTiOnS PrOCESS
ApprovAL ii
Customerapproves design
concept
ApprovAL iii
fike’s testing services are available to certify custom products developed for specific customer applications including those manufactured for aerospace/defense, special gas handling applications and many other variants of fike standard product offerings.
flOW labThe Fike Flow Laboratory is a general-purpose flow characterization laboratory for quantifying the performance of rupture/bursting disc devices, rupture disc/relief valve combinations, and any other device where flow capacity and/or resistance to flow must be determined. As part of our custom product design process, we are able to simulate specific applications/installations to determine if the potential solution provided by Fike engineers will meet the performance criteria as specified. And since Fike has equipment ranging from 1/4-inch to 4-inches (DN6 TO DN100), we have the capability of testing a wider range of disc sizes than any of our competition.
The laboratory is also used as a research and development tool, to support specific customer applications and many other unique testing opportunities:
• Product development flow resistance and capacity tests • ASME “UD” certification tests • ASME five-year production audits of certified rupture disc devices • Flow capacity measurements • Combination capacity tests of rupture discs coupled with pressure relief valves • “Uv” (valve) certification tests
The Fike Flow Laboratory has met the requirements of the American Society of Mechanical Engineers (ASME) and the National Board of Boiler and Pressure vessel Inspectors (NB) and is a certified testing facility (certification #PrD-023). Fike engineers who are responsible for test supervision and record keeping are accredited as “Authorized Observers” (AO) by the ASME and the NB.
• burst testing
• system simuLAtion
• temperAture testing:
-320°F to 1650°F (-196°c to 900°c)
• FuLL scALe testing
• expLosion testing
• 3-Axis coordinAte meAsurement
• rAte-oF-rise testing
• environmentAL testing
• FLoW testing
• cycLe LiFe testing
• hydrostAtic testing
• pneumAtic testing
• heLium LeAk testing
• metALLogrAphic imAging
And evALuAtion
• rAdiogrAphic exAminAtion
• Liquid penetrAnt exAminAtion
• high speed digitAL video
• high speed dAtA Acquisition
• positive mAteriAL identiFicAtion (pmi)
TESTing CAPABiLiTiES
Please use the Engineered Product Specification Form to provide the appropriate information about your application.
FiKE EnginEErEd SOLUTiOnS PrOCESS
Metallurgy labThe Fike Metallurgy Lab is vital to the design of engineered products, as it is used to increase the understanding of the behavior of manufacturing materials, necessary for
different applications. Fike’s on-site location allows product investigations to be performed quickly and efficiently by a staff with nearly 40 years of metallurgical and materials science expertise.
Among the tests available through the Fike Metallurgy Lab are: • Analysis of rupture discs, plate, bar, pipes, etc., for size and shape, cleanliness, surface condition (including base metal and coatings), modes of failure, microstructural condition and constituents, grain size and boundary conditions, chemical segregation, and microhardness. • Microscopic measurement and analysis, image archiving and electronic reporting. • Pressure vessel soundness and material properties after heat treatment. • Disc score depth and shape consistency.• Heat treat furnace time; temperature and atmospheric effects on disc materials. • Corrosion effects on discs and corrosive properties of disc materials.
industries and applicatiOns
• Aerospace• Aviation• Military Defense• High Purity• Nuclear• refrigeration • Medical• Activation Devices• Missile Defense• High voltage Transformers• Fuel Systems• Cryogenic and High Temperature Systems• Gas Sampling and Storage Containers• Electronic Industries • Hydraulic and Pneumatic Actuation Systems• Solid and Liquid Propellant Isolation Systems• Nuclear reactor Safety Shutdown Systems• Pressure Activation for Oil Exploration• Stored Energy
fiKe Has designed prOducts
fOr a Wide range Of
custOMers including:
• Swagelok• BASF• Savannah river Site• Matheson Tri-Gas• Scientific Magnetics• Aircraft Braking Systems Corporation• Hamilton Sundstrand Corporation• ATK• SAES Pure Gas• B/E Aerospace• Formosa Plastics• Boeing• Aerojet – General Corporation• Pratt & Whitney• Macron Safety Systems• Stork SP Aerospace
Manufacturing capabilities
Fike’s sophisticated in-house manufacturing capabilities allow us to create quality, custom products, often in just a few weeks.
• Tool and Die
• Fabrication
• 5 Axis Laser
• CNC Machining (2, 3, and 4 Axis)
• Heat Treating and Annealing
• Gas Metal Arc Welding (GMAW)
• Gas Tungsten Arc Welding (GTAW)
• Shielded Metal Arc Welding (SMAW)
• Electron Beam Welding
• Passivation (QQ-P-35)
• Conversion Coating
• Teflon® Coating
• Polyurethane Coating
• Electropolishing
• Custom Clean or Treatment Options
5 axis laser
Fike’s 5 Axis laser technology improves
our ability to make uniquely designed products over and over without the need for tooling. This technology allows us to be diverse and creative when designing a specific product for your needs. The 5 Axis laser offers nearly limitless capabilities to turn a mere concept quickly into prototype parts that test theories and solve difficult and challenging applications.
perfOrMance capabilities
Fike rupture/bursting discs can be designed to withstand severe operating conditions without affecting performance. They provide a full, unrestricted opening with millisecond response time for critical sealing, venting, one-time valving, activation, stored energy, or pressure relief applications. Custom sizes, from 1/8 inch to 68 inches (DN5 to DN1700) have been manufactured to meet specific needs. We offer discs in a wide range of materials of construction to meet individual requirements and applications.
Burst Pressures: From 0.5 psi to 120,000 psi (0.03 bar to 8,275 bar) and up, dependent on size, flow requirements and material.
Backpressure: Patented Fike designs allow back pressure multiple times the rated burst pressure.
Operating Temperature: -320°F to 1650°F (-196°C to 900°C) with special heat reduction; design temperatures may be higher.
Burst Tolerance: +/- 5% is typical with +/- 2% possible in certain configurations. A wider range of operating temperatures may be possible. Please consult factory.
Non-Fragmentation: May be achieved when specified.
Critical Leakage: Most designs can meet a leakage requirement not to exceed 1 X 10-8 cc Helium/sec., at one atmosphere differential.
Operating Pressure: May be as high as 95% of the disc rating.
Materials of Construction: Aluminum, Stainless Steel, Nickel, Monel®, Inconel®, Silver, Hastelloy®, Boron Carbon, Titanium, Tantalum, and Zirconium. Other materials possible, subject to availability.
Response Time: Special designs may achieve opening in 1 millisecond, or less.
E-mai l : fpssa les@f ike . com
AmericAs
Fike corporAtionBlue Springs, MO, USATel: +1-816-229-3405Email: [email protected]
Fike cAnAdABurlington, CanadaTel: +1-905-681-3100 Email: [email protected]
Fike LAtinA LtdAJundiai, BrazilTel: +55-11-4525-5900Email: [email protected]
cAribbeAn, centrAL, south AmericA Houston, TX Tel: +1-281-895-8342Email: [email protected]
europe
Fike europeHerentals, BelgiumTel: +32-14-210031E-mail: [email protected]
Fike united kingdomMaidstone, Kent, United KingdomTel: +44-1-622-677081Email: [email protected]
Fike FrAnceCergy Pontoise Cedex, FranceTel: +33-1-30-31-31-32Email: [email protected]
Fike deutschLAndMannheim, GermanyTel: +49-621-321-67-0E-mail: [email protected]
Fike itALiAMilano, ItalyTel: +39-02-2952-4166Email: [email protected]
Fike ibericABarcelona, SpainTel: +34-93-6000-800Email: [email protected]
middLe eAst
Fike middLe eAst spc Kingdom of BahrainTel: +973-1758-3285
AsiA
Fike AsiA pAciFic sdn bhdSelangor Darul Ehsan, MalaysiaTel: +60-3-7859-1462Email: [email protected]
Fike JApAnTokyo, JapanTel +81-335-951-291Email: [email protected]
Fike indiA pvt. Ltd.Pune, IndiaTel: +91-20-2439-1947Email: [email protected]
Fike and Fike Corporation are trademarks or registered trademarks of Fike Corporation. Monel and Inconel are trademarks or registered trademarks of Special Metals Corporation. Hastelloy is a trademark or registered trademark of Haynes International, Inc. Teflon is a trademark or registered trademark of E.I. DuPont de Nemours and Company.
U.S. Patent 5,996,696; U.S. Patent 6,591,915; U.S. Patent 6,752,212; and other U.S. and foreign patents pending.
© Copyright 2009, Fike Corporation. All rights reserved. Form No. B9025 0909 Printed in the U.S.A.W W W . F I K E . C O M
FIKE GLOBAL MANUFACTUrING, SALES AND SErvICEc o n t A c t F i k e
Fike is a global team of
experienced professionals
dedicated to l i fe and
business safety. We work
closely with our cl ients
to solve highly complex
problems with easy-to-use
products and services.