1
BARDAHL Manufacturing Corp. 1400 N.W. 52nd Street, Seattle, WA 98107 888-227-3245 bardahl.com Racing Formulas Perfected for Today’s Vehicles Racing Formulas Perfected for Today’s Vehicles THE PROBLEM Engine deposits such as gum, varnish and sludge are byproducts of normal operation and motor oils are designed to suspend and remove these deposits. Many vehicles often operate under ‘severe’ conditions, such as ‘stop and go driving’ that can increase these deposits and breakdown the ability of the oil to counteract this situation. In addition, increased under hood temperatures, reduced crankcase capacity, infrequent oil changes will worsen the problem. As these deposit levels build-up in the engine, the result is significantly reduced performance and diminished fuel economy. THE SOLUTION BARDAHL ALL-U-NEED!® Engine Tune-up is a concentrated blend of solvents, dispersants, detergents and anti-wear additives that will clean and condition the engine, by removing gum and varnish deposits and preventing further deposit formation. The ALL-U-NEED! ® solution will chemically ‘tune-up’ an engine by freeing-up stuck rings, removing deposits from valves, and eliminating sludge from oil gullies and passages, so the engine can operate with greater efficiency. THE BENEFITS Proprietary chemical formula dissolves harmful gum and varnish and removes sludge Increases engine performance by cleaning rings, pistons, valves, and other close tolerance parts Chemically “tunes-up” the engine by loosening sticky valves, lifters and rings Dispersants and detergents keep removed deposits in suspension until the motor oil is drained Improves engine efficiency and performance, extending the life of the vehicle DIRECTIONS Pour entire contents into the crankcase. Do not overfill. Run the engine at a fast idle for 20 to 30 minutes, then change the oil and filter. Or just add Engine Tune-Up to the engine and it will work while driving, with best results normally achieved after 100 to 200 miles. Dispose of any used or unused solution in accordance with the local, state and federal regulations. PRODUCT SPECIFICATIONS Product # 4019 UPC Code 0 76906 04019 9 Size 12 oz (355 ml) Case Pack (Qty/Wt/Dims) 12 /10 lbs / 0.42 ft 3 / 11”L x 8”W x 8.25”H Case UPC 30076906040190 Color Light Amber Density 0.855 Specific Gravity 0.86 Flash Point >141° / >60.5°C Product #4019 ENGINE TUNE-UP Removes Gum, Varnish and Sludge to Improve Efficiency and Extend the Life of the Engine

ENGINE TUNE-UP - Bardahl - Engine Tune-Up PIS v1...Or just add Engine Tune-Up to the engine and it will work while driving, with best results normally achieved after 100 to 200 miles

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ENGINE TUNE-UP - Bardahl - Engine Tune-Up PIS v1...Or just add Engine Tune-Up to the engine and it will work while driving, with best results normally achieved after 100 to 200 miles

BARDAHL Manufacturing Corp. 1400 N.W. 52nd Street, Seattle, WA 98107 888-227-3245 bardahl.com

Racing Formulas Per fected for Today’s Vehic les ™Racing Formulas Per fected for Today’s Vehic les ™

THE PROBLEM Engine deposits such as gum, varnish and sludge are byproducts of normal operation and motor oils are designed to suspend and remove these deposits. Many vehicles often operate under ‘severe’ conditions, such as ‘stop and go driving’ that can increase these deposits and breakdown the ability of the oil to counteract this situation. In addition, increased under hood temperatures, reduced crankcase capacity, infrequent oil changes will worsen the problem. As these deposit levels build-up in the engine, the result is significantly reduced performance and diminished fuel economy.

THE SOLUTION BARDAHL ALL-U-NEED!® Engine Tune-up™ is a concentrated blend of solvents, dispersants, detergents and anti-wear additives that will clean and condition the engine, by removing gum and varnish deposits and preventing further deposit formation. The ALL-U-NEED!® solution will chemically ‘tune-up’ an engine by freeing-up stuck rings, removing deposits from valves, and eliminating sludge from oil gullies and passages, so the engine can operate with greater efficiency.

THE BENEFITS Proprietary chemical formula dissolves harmful gum and varnish and removes sludge

Increases engine performance by cleaning rings, pistons, valves, and other close tolerance parts

Chemically “tunes-up” the engine by loosening sticky valves, lifters and rings

Dispersants and detergents keep removed deposits in suspension until the motor oil is drained

Improves engine efficiency and performance, extending the life of the vehicle

DIRECTIONSPour entire contents into the crankcase. Do not overfill. Run the engine at a fast idle for 20 to 30 minutes, then change the oil and filter. Or just add Engine Tune-Up™ to the engine and it will work while driving, with best results normally achieved after 100 to 200 miles. Dispose of any used or unused solution in accordance with the local, state and federal regulations.

PRODUCT SPECIFICATIONSProduct # 4019 UPC Code 0 76906 04019 9 Size 12 oz (355 ml) Case Pack (Qty/Wt/Dims) 12 /10 lbs / 0.42 ft3 / 11”L x 8”W x 8.25”H Case UPC 30076906040190 Color Light Amber Density 0.855 Specific Gravity 0.86 Flash Point >141° / >60.5°C

Product #4019

ENGINE TUNE-UP™

Removes Gum, Varnish and Sludge to Improve Efficiency and Extend the Life of the Engine