J:Uil!IJohnDeere 4045T Turbocharged95 SAEnet hp (71 kW) / 100 SAEgross hp (75 kW)4

276 cu. in. (4.524 L)1.6 to 2.6 gaL/hI. (6.0 to 9.8 Llh)25 percent268 lb.-ft. (363 Nm)pressure system with full-flow filter and coolerdual stage dry type with safety element and precleaner12 volt with 95-amp alternator

ENGINE ~illIl'Type John Deere 4045T TurbochargedRatedpower@2.200rpm 85SAEnet hp (63.5kW)/90 SAEgrosshp (67kW)Cylinders 4Displacement 276 cu. in. (4.524 L)Fuel consumption, typical 1.0 to 2.0 gal./hI. (3.8 to 7.6 Llh)Torque rise 25 percentMaximum net torque 254 lb.-ft. (344 Nm)Lubrication pressure system with full-flow spin-on filter and coolerAir cleaner dual stage dry type with safety element and precleanerElectrical system 12 volt with 95-amp alternatorSucker-type cooling fan

four-speed, helical cut gear, collar shift transmission synchronized in all gears with hydraulic reverserTRANSMISSION

Torque converter, single stage, dual phasewith 2.23:1 stall ratio 11 in. (280 mm) 11 in. (280 mm)

Travel speeds with 19.5L-24 rear tires with 21L-24 rear tiresForward Reverse Forward

Gear1 3.4mph (5.5km/h) 3.9mph (6.3km/h) 3.4mph (5.5km/h)Gear 2 5.9 mph (9.5 km/h) 6.8 mph (10.9 km/h) 5.9 mph (9.5 km/h)Gear3 12.6mph (20.3km/h) 14.5mph (23.3kill/h) 12.6mph (20.3km/h)Gear4 19.7mph (32.7km/h) 22.6mph (36.4km/h) 19.7mph (32.7kill/h)

FINALDRIVES heavy-duty, inboard planetary final drivesevenlydistribute shock loads over three gearsBRAKES hydraulic wet disk, mounted inboard, pressure cooled and lubricated, self adjusting and self equalizingCAPACITIES

Fuel tank (with ground level fueling) 34 gal. (129 L) 34 gal. (129 L)Engine coolant 17 qt. (16 L) 17 qt. (16 L)Engine oil including filter 9 qt. (8.5 L) 9 qt. (8.5 L)Torque converter and reverser system 14 qt. (13 L) 14 qt. (13 L)Hydraulic system 21 gal. (79 L) 21 gal. (79 L)Transaxle with MFWO 5.5 gal. (21 L) 5.5 gal. (21 L)

STEERING hydrostatic power steering conforms to SAEJ1151, emergency steering to SAEJ53

Non-powered axleCurb turning radius with brakes 11ft. 8 in. (3.55 m)

Without brakes 13 ft. 3 in. (4.04 m)Bucketclearancecirclewith brakes 31 ft. 8 in. (9.64m)

Without brakes 34 ft. 9 in. (10.60 m)Steering wheel turns, stop to stop 2.2 to 2.9

Mechanical-front-wheel drive

Curb turning radius with brakes 11 ft. 5 in. (3.49 m)Without brakes 13 ft. 6 in. (4.11 m)

Bucket clearance circle with brakes 29 ft. 7 in. (9.02 m)Without brakes 33 ft. 8 in. (10.26 m)

Steering wheel turns, stop to stop 2.5Axle oscillation, stop to stop, both axles 22 degrees

Axle ratings StaticFront , 56,000 lb.

(25 300 kg)Rear 51,000 lb.

(23 100 kg)

Dynamic56,000 lb.(25 300 kg)68,000 lb.(30 800 kg)

SAE14319,600 lb.(8800 kg)15,960 lb.(7200 kg)

Reverse

3.9 mph (6.3 km/h)6.8 mph (10.9 km/h)14.5 mph (23.3 km/h)22.6 mph (36.4 km/h)

11ft. 8 in. (3.55 m)13 ft. 3 in. (4.04 m)31 ft. 8 in. (9.64m)34 ft. 9 in. (10.60 m)2.2 to 2.9

11 ft. 5 in. (3.49 m)13 ft. 6 in. (4.11 m)29 ft. 7 in. (9.02 m)33 ft. 8 in. (10.26 m)2.5

22 degreesStatic56,000 lb.(25 300 kg)51,000 lb.(23 100 kg)

Dynamic56,000 lb.(25 300 kg)68,000 lb.(30 800 kg)

SAE 14321,100 lb.(9500 kg)16,800 lb.

(7600 kg)

HYDRAULICSYSTEM__-System closedcenterPressure, main relief 2,755 psi (19 000 kPa)Pump radial pistonsFlow @2,200 rpm 35 gpm (133 Llmin.)Filter, return oil ,.." 10-micron, spin-on vertical replaceable element

closed center

2,755 psi (19 000 kPa)radial pistons35 gpm (133 L/min.)lO-micron, spin-on vertical replaceable element

CYLINDERSBore

Loader boom (2) 3.54 in. (90 mm)Loader bucket (1) 3.54 in. (90 mm)Backhoe boom (1) 4.53 in. (115 mm)Backhoe crowd (1) 3.94 in. (100 mm)Backhoe bucket (1) 3.54 in. (90 mm)Backhoe swing (2) 3.94 in. (100 mm)Backhoe extendable dipper (1) 3.15 in. (80 mm)Backhoe stabilizer (2) 3.94 in. (100 mm)Steering (1) non-powered axie 1.97 in. (50 mm)Steering (1) MFWO 2.36 in. (60 mm)

4100 heavy-lift optionBackhoe boom 5.00 in. (127 mm)Backhoe crowd (1) 4.53 in. (115 mm)

Backhoe extendable dipper (1) 3.15 in. (80 mm)

I

Stroke Rod Bore Stroke Rod

29.84in. (758mm) 1.77in. (45mm) 3.54in. (90mm) 29.84 in. (758mm) 1.77in. (45mm)28.19in. (718mm) 1.77in. (45mm) 94jn. (100mm) 28.19 in. (718mm) 1.97in. (50mm)38.54in. (979mm) 2.48in. (63mm) 5.00in. (127mm) 42.72in. (1085mm) 2.50 in. (64mm)32.24in. (819mm) 2.20in. (56mm) 4$.11. (115mm) 34.57in. (878mm) 2.48.in. (63mm)31.00 in. (788mm) 1.97in. (50mm) 3.54in. (90mm) 31.00in. (788mm) 1.97in. (50mm)9.49 in. (241mm) 1.97in. (50mm) 3.94in. (100mm) 9.49 in. (241mm) 1.97in. (50mm)48.00 in. (1200mm) 1.77in. (45mm) 3.15in. (80mm) 59.21 in. (1504mm) 1.77in. (45mm)19.96in. (507mm) 1.97in. (50mm) 3.94in. (100mm) 19.96in. (507mm) 1.97in. (50mm)9.49 in. (241mm) 0.98in. (25mm) 1.97in. (50 mm) 9.50 in. (241mm) 0.98 in. (25mm)7.90 in. (202mm) 0.98in. (25mm) 2.36in. (60mm) 7.90in. (202mm) 0.98 in. (25mm)

42.72 in. (1085mm) 2.50in. (64mm)34.57in. (878mm) 2.48in. (63mm)59.21 in. (1504mm) 1.77in. (45mm)

A'TI 0 N S

TIRES mIiIRear

With non-powered front axle,.,.".,.".,.,.".".".".,.,.".".,.19,5L-24, 10 PR R421L-24, 10 PR R4

Front11L-16, 12 PRF314.5/75-16,1,10 PR F3

m1!IRear

19,5L-24, 10 PR R4

21L-24, 10 PR R4

19.5L-24, 12 PR R4

21L-24, 10 PR R4

18.4-28L, 12 PR R4

19.5L-24, 12 PR R4

With mechanical-fro nt-wheel drive ,.,..,...,.,., , ,.,..21L-24, 10 PRR418.4-28, 12 PR R419.5-24, 10 PRR4

12.00-16.5,8 PR, lug tread14-17.5,10 PR12.00-16.5, 8 PR

Front

11L-16, 12 PR F3

14.5/75-16.1, 10 PR F3

llL-16, 12 PR F3

12.00-16.5,8 PR, Sure Grip

14.00-17.5,10 PR, Sure Grip

12.00-16.5,8 PR, Sure Grip

SAE OPERATINGWEIGHTS

Standard ,., , ,..., , " , 15,600 lb. (7075 kg)

Cab adds ,.., ,.,..,..,.,.,.,..,..,.,.,.,..., , ,..,.,.,.500 lb. (227 kg)

Mechanical-front-wheel drive adds ,.,...,...190 lb. (86 kg)

Standard extendable dipperstick ,.,.., ,.,.,..4 ft. (1.22 m)

Excluding required counterweight adds ,...,.350 lb. (158 kg)

Optional front counterweight(s) add(s) ,.,., ,.1,050 lb. (476 kg)

Backhoe bucket coupler adds,.,., , , ,..,.200 lb. (91 kg)

410D heavy-lift option .,.,.,.., , ,., , 16,250 lb. (7371 kg)

5 ft. (1.52 m) extendable dipperstick

Excluding required counterweight adds ,."..589 lb. (267 kg)

See backhoe and loader performance data for bucket weights.

LOADERBUCKETSWidth

Heavy-duty long lip* ,.,..,..,., ,.,..., ,..,...,..,...,.86 in. (2184 mill)92 in. (2340 mill)

General-purpose long lip , , ,..., ,..., ,..89 in. (2270 mill)Multipurpose , , , , , 92 in. (2340 mill)*With auxiliary cutting edge and skid shoes standard.NOTE:All other buckets pre-drilled for auxiliary cutting edge.

BACKHOEPERFORMANCE r;U1111With Standard

Dipperstick*

HeapedCapacity1.12 cu. yd. (0.86 m3)1.42 cu. yd. (1.09 m3)1.25 cu. yd. (0.96 m3)1.25 cu. yd. (0.96 m3)

mIiIWith Heavy-LiftPackage"

16,000 lb. (7260 kg)

500 lb. (227 kg)

190 lb. (86 kg)

5 ft. (1.52 m)

'5891b. (267 kg)

760'lb. (317 kg)

200 lb. (91 kg)

Weight

918 lb. (417 kg)

965 lb. (438 kg)

775 lb. (351 kg)

1,560 lb. (708 kg)

Width

92 in. (2340 mill)92 in. (2340 mill)89 in. (2270 mill)92 in. (2340 mill)

HeapedCapacity1.42 cu. yd. (1.09 m3)1.62 cu. yd. (1.24 m3)1.25 cu. yd. (0.96 m3)1.25 cu. yd. (0.96 m3)

mIiIWithStandard4Ft. (1.22m)ExtendableDipperstick*Retracted Extended

Weight

965 lb. (438 kg)

1,160 lb. (527 kg)

750 lb. (340 kg)

1,560 lb. (708 kg)

m!I!IWith Standard

Dipperstick"

Digging force, bucket cylinder (power digposition) ,..,.,.,..,.,..., ,., ,.., ,., ,.,..,...11,700 lb. (52 kN) 11,120 lb. (49.5 kN)

Digging force, crowd cylinder ., ,..., , , ,.,.,.., 6,450 lb. (29 kN) 8,100 lb. (36 kN)Swing arc.,..., , ,...,..., ,...,., , , ,., ,.180 degrees 180 degreesOperatorcontrol , ,..,.,.,.., ,.,..,., ,.,.twa levers two leversBucket positions (rollback) , ,., , ,., 9 or 18 degrees 8 or 17 degreesStabliizer angle rearward.,.,.,..., ,.,.,., ,., , 14.5 degrees 14.5 degreesLifting capacity, maximum ., ,.,.., ,.., , , 4,802 lb. (2183 kg) 6,746 lb. (3066 kg)Leveling angle ,..,...,.,...,..,...,...,.., ,.,.,..., ,..,.,...13 degrees 13 degrees*Backhoe specifications are with 24 in. x 7.5 cu. ft. (610 mm x 0.21 m3) bucket.

**Backhoespecifications are with 24 in. x 8.8 cu. ft. (610 mm x 0.25 m3) bucket.

mIiIWith HeavyLift 5 Ft. (1.52 m) ExtendableDipperstick"Retracted Extended

11,700 lb. (52 kN)

7,000 lb. (31 kN)

180 degrees

right foot treadle

8 or 17 degrees

14.5 degrees

4,995 lb. (2270 kg)

13 degrees

11,700 lb. (52 kN)

4,770 lb. (21 kN)

180 degrees

right foot treadle

12 or 22 degrees

14.5 degrees

3,040 lb. (1382 kg)

13 degrees

m1!IWith 5 Ft. (1.52 m)ExtendableDipperstick**

Retracted Extended

11,100 lb. (49.5 kN)

7;'600'IM(33.8 kN)

180 degreestwo levers

8 or 17 degrees

14.5 degrees

6,780 lb. (3074 kg)

13 degrees

Digging force, bucket cylinder (power digposition) .., ,.,...,..., , ,..,., 11,000 lb. (48.9 kN) 11,000 lb. (48.9 kN)

Diggingforce,crowdcylinder , ,..., , ,., 8,100 lb. (36 kN) 5,430 lb. (24 kN)Swing arc..,..,...,.,., ,...,.,.,..., , ,..,.,., ,..., 180 degrees 180 degreesOperator control , ,.,..,..., , ,...,..., right foot treadle right foot treadleBucket positions (rollback) ...,...,..,., ,...,.,..., , ,.8 or 18 degrees 12 or 21 degreesStabliizeranglerearward , ,.,.,., ,..,.,..14.5 degrees 14.5 degreesLifting capacity, maximum , ,.,.,., ,.,.,..,., 6,441 lb. (1781 kg) 3,288 lb. (1495 kg)Levelingangle ,..,.,.,., , ,., ,., ,..,..,., ,.13 degrees 13 degrees**Backhoespecifications are with 24 in. x 8.8 cu. ft. (610 mm x 0.25 m3) bucket.

BACKHOEBUCKETSFOR4100AND5100Width

Standard duty..,., , 12 in. (305 mill)18 in. (457 mill)24 in. (610 mill)30 in. (762 mill)36 in. (914 mill)36 in. (914 mill)

Extra heavy duty .,., 18 in. (457 mill)24 in. (61Omm)30 in. (762 mill)

11,230 lb. (49.9 kN)

8,390 lb. (37 kN)

180 degrees

right foot treadle

8 or 18 degrees

14.5 degrees

7;232 lb. (3279 kg)

13 degrees

Capacity2.5 cu. ft. (0.07 m3)5.1 cu. ft. (0.14 m3)7.5 cu. ft. (0.21 m3)10.0 cu. ft. (0.28 m3)10.0 cu. ft. (0.28 m3)14.5 cu. ft. (0.41 m3)

5.1 cu.ft. (0.14m3)7.5 cu. ft. (0.21 m3)10.0 cu. ft. (0.28 m3)

Weight

244 lb. (111 kg)

322 lb. (146 kg)

370 lb. (168 kg)

410 lb. (186 kg)

430 lb. (195 kg)

556 lb. (252 kg)

362 lb. (164 kg)

424 lb. (192 kg)

474 lb. (215 kg)

Width

Heavy duty...,..., 12 in. (305 mill)18 in. (457 mill)24 in. (610 mill)24 in. (610 mill)30 in. (762 mill)36 in. (914 mill)

Ditch cleaning ..., ,...36 in. (914 mill)36 in. (914 mill)

11,230 lb. (49.9 kN)

5,430 lb. (24.2 kN)

180 degrees

right foot treadle

12 or 21 degrees

14.5 degrees

'3;6f6\lb. (1639 kg)

13 degrees

Capacity2.5 cu. ft. (0.07 m3)5.1 cu. ft. (0.14 m3)7.5 cu. ft. (0.21 m3)8.8 cu. ft. (0.25 m3)10.0 cu. ft. (0.28 m3)10.0 cu. ft. (0.28 m3)

10.0 cu. ft. (0.28 m3)14.5 cu. ft. (0.41 m3)

Weight

258 lb. (117 kg)

334 lb. (151 kg)

396 lb. (180 kg)

476 lb. (216 kg)

444 lb. (201 kg)

470 lb. (214 kg)

370 lb. (168 kg)

500 lb. (235 kg)

'Based on SAE131. Rated lift capacities are in lb. (kg). Maximum lift capacities may bestability and/or hydraulically limited.

410D BACKHOE WITH

STANDARD DIPPERSTICK

41ODBACKHOEWITH OPTIONALHEAVY-LIFTPACKAGE

51ODBACKHOEWITHSTANDARDDIPPERSTICK

, 5

12 .4

1,660(755)

1,950 (885)

1,990 (900)

1,970 (890)

1,920 (870)

1,860(845)

1,810(820)

,;1(750,~1iHoi

1,670 (755).

~~~ 1,640 (745)1,630 (740)

-1,690(770)

2,290 (1040)

8 .3

.2

0 .0

-28 .3

12.4.5

FEET

METERS

41

82

:!J5

12j

164

410D BACKHOEWITH4 Fr. (1.22 M)DIPPERSTICK,RETRACTED

.1

12.4.5

.1

.1

..5

1204

.1

2,760 (1255)

\3,020 (1370)

3,040 (1380)

3,000 (1360)

2,930 (1330)

I2,860 (1295)

2,780 (1265) ,

,,2.71~(1, O. 0

'~,fi50(1205)' .12,600 (1180) 4

. 2,560 (1165)2,560 (1165)

2,630(1190)

"3,020 (1370)

.5

12.4

8 .,3

.2,

.1

.28 . 3

12.4.5

FEET

METERS

8

2:!J

5 '6

8 .3

.2

.2

8 .3

FEETMETERS

41

:!J5

12j

164

82

12j

164

41ODBACKHOEWITH 4 FT.(1.22 M)DIPPERSTICK,EXTENDED

41OD HEAVY-LIFTPACKAGE/510DBACKHOEWITH 5 FT. (1.52 M) DIPPERSTICK,RETRACTED'

.5'

12

8 .3'

.2.'

FEET

, METERS

4

116

48

212

j

410D HEAVY-LIFTPACKAGE/51ODBACKHOEWITH 5 FT.(1.52 M) DIPPERSTICK,EXTENDED'

FEET

METERS

4 8

i 2:!J

6~

7 812 16

4 5

I

.1..

1,055 (480)

1,050(475)

1,070 (485)

. 1,120 (510)1,350 (615)

FEET

METERS

4

i:!J

58

212

j

16

4

'1Ih'II~I~'j(lII~"~1~~~'IH:Ii~..

. 514

. 4'

1°.a

.1

.0'

.,

10.3'.4

14.5.

'" ROPSand cab

Regulartypeindicates4100 dimensions.ItalictypeindicatesS100 dimensions.

2,760 (1250)

2,760 (1250)

2,700 (1225)

2,620 (1185)

2,530(1150)

2,440 (1110)

.

".

.,.,I~'

,.

3

,

60

,

t,t,970

,

.,

)

",.

T

,

,;;,

;,

'

,

',!

0 .O.

,2,290(ID35)'" . 1BOOM

Vz2,220 (1010)

LJFT~2,170 (985)

2,150 (975)

2,170 (985)

2,460 (1115)

8 .3'

.2

.1

.28.a

12.4.5

FEETMETERS

0

u:!J

5 68

212j

15

1'1

'S J\ONS

BACKHOE Di.IWith Standard

Dipperstick*

1.12 cu, yd. (0.86 m3)

Heavy-Duty Long-Lip

Operator control ,.".,."..".,..,.,.., ,., ".,...,..,..,..".,..single lever

Breakout force , 10,000 lb. (45.0 kN)

Lifting capacity, full height 7, 116 lb. (3228 kg). Height to bucket hinge pin, maximum 11 ft. 1 in. (3.38 m)Q Dump clearance, bucket at 45 degrees 9 it. (2.74 m). Bucket dump angle, maximum 43 degrees

0 Reach at full height, bucket at 45 degrees 29.1 in. (739 mm)

0 Rollback angle at ground level 40 degrees0 Diggingdepthbelowground,bucketlevel 4.2 in. (107mm)

Raising time to full height 4.5 see.

Bucket dump time 1.0 see.Bucket lowering time (power down) 3.0 see.

"111'" LOADERPERFORMANCEWITHBUCKETOPTIONS1.42 cu. yd. (1.09 m3)Heavy-Duty Long-Lip

Operator control single lever

Breakout force 10,410 lb. (46.3 kN)

Lifting capacity, full height 7,300 lb. (3310 kg)

0 Height to bucket hinge pin, maximum 11 it. 1 in. (3.38 m)Q Dump clearance, bucket at 45 degrees 8 ft. 9 in. (2.67 m). Bucket dump angle, maximum 45 degrees

0 Reachat fullheight,bucketat 45 degrees 29.1in. (739mm)0 Rollback angle at ground level 40 degrees0 Digging depth below ground, bucket level 4.0 in. (100 mm)

Raising time to full height 4.4 see.Bucket dump time 1.0 see.

Bucket lowering time (power down) 3.0 see.

j. - II 11'1

mIJIWith Heavy-LiftPackage**

12ft.2in.(3.70m)

19 it. 3 in. (5.87 m)23 it. (7.01 m)

15 it. 10 in. (4.84 m)

15 ft. 9in. (4.80m)

14ft. 9 in. (4.49m)

13 in. (330 mm)

160 or 180 degrees12ft.4in.(4.51m)

22 it. 11 in. (6.99 m)7 ft. 8 in. (2.34 m)

9 ft. 10 in. (3.00 m)

11 it. 4 in. (3.45 m)

86 in. (2.62 m)

Extended

15ft. (4.58m)

23 it. 11 in. (7.29 m)

27 ft. 8 in. (8.43 m)

20 it. 10 in. (6.34 m)

20 it. 8 in. (6.30 m)

20ft. (6.09 m)

13 in. (330 mm)

160 or 180 degrees13 ft. 5 in. (4.90 m)

23 it. (7.01 m)

7 ft. 8 in. (2.34 m)

9 it. 10 in. (3.00 m)

11 it. 4 in. (3.45 m)

86 in. (2.62m)

1.2S cu. yd. (0.96 m3)General-PurposeLong-Lipsingle lever9,500 lb. (42.0 kN)

6,900 lb. (3130 kg)11 ft. 1 in. (3.38 m)

8 ft. 5 in. (2.58 m)

43 degrees34 in. (868 mm)

40 degrees3.5 in. (88 mill)4.5 see.

1.0 see.

3.0 sec.

1.25cu.yd.(0.96m3)General-PurposeLong-Lipsingle lever9,900 lb. (44.0 kN)

7,050 lb. (3195 kg)

11 it. 1 in. (3.38 m)

8 ft. 5 in. (2.58 m)45 degrees

34 in. (868 mill)

40 degrees4.0 in. (100 mill)4.4 see.

1.0 see.

3.0 see.

..

Di.IWith Standard4 Ft. (1.22 m)ExtendableDipperstick*Retracted

11 it. 9 in. (3.59 m)

17 ft. 8 in. (5.40 m)

21 it. 5 in. (6.53 m)

14 it. 7 in. (4.45 m)

14 it. 5 in. (4.40 m)

13 ft. 4 in. (4.07 m)

12 in. (305 mm)

160 or ]80 degrees12ft. 4in. (3.78m)

23 ft. (7,01 m)7 it. 8 in. (2.34 m)

9 ft. 10 in. (3.00 m)

11 it. 4 in. (3.45 m)

86 in. (2.62m)

Extended

12 ft. 9 in. (3.89 m)

21 ft. 4 in. (6.50 m)

25 it. 1 in. (7.64 m)

18 it. 4 in. (5.60 m)

18 ft. 3 in. (5.57 m)

17ft.5in.(5.32m)

12 in. (305 mm)

160 or 180 degrees12 ft, 4 in. (3.78 m)

23 it. (7.01 m)7 ft. 8 in. (2.34 m)

9 ft. 10 in. (3.00 m)

11 it. 4 in. (3.45 m)

86 in. (2.62m)

mIDIWith 5 Ft. (1.52 m) Extendable Dipperstick**

Retracted

12 it. 1 in. (3.69 m)

19 ft. 3 in. (5.87 m)

23 it. (7.01 m)

15 ft. 11 in. (4.86 m)

15 it. 11 in. (4.86 m)

14ft. lOin. (4.51 m)

13 in. (330 mm)

160 or 180 degrees13 ft. 5 in. (4.90 m)

23 ft. (7.01 m)7 ft. 8 in. (2.34 m)

9ft. lOin. (3.00m)

11 it. 4 in. (3.45 m)

86 in. (2.62 m)

1.42cu.yd. (1.09m3)Heavy-DutyLong-Lipsingle lever9,900 lb. (44.0 kN)

7,200 lb. (3265 kg)11 it. 1 in. (3.38 m)8 ft. 9 in. (2.67 m)

43 degrees29.8 in. (758 mm)

40 degrees4.2 in. (107 mill)4.5 see.

1.0 see.

3.0 see.

1.62cu.yd. (1.24m3)Heavy-DutyLong-Lipsingle lever9,900 lb. (44.0 kN)

7,050 lb. (3195 kg)11 ft. 1 in. (3.38 m)

8 it. 7 in. (2.63 m)

45 degrees31 in. (787 mm)

40 degrees4.0 in. (100 mm)4.4 see.

1.0 see.

3.0 sec.

.. IIIIIIIIIII

e Loading height, truck loading position 12 it. 3 in. (3.72 m)4) Reach from center of swing mast 18 it. 4 in. (5.59 m)e Reach from center of rear axle 22 it. 1 in. (6.73 m)e Maximum digging depth 15 it. 3 in. (4.66 m)

0 Digging depth (SAE):(1) 2-ft. (610 mm) flat bottom 15 it. 2 in, (4.61 m)

(2) 8-ft. (2440 mm) flat bottom 14 it. 1 in. (4.30 m)

0 Ground clearance, minimum 12 in. (305 mm)

G Bucket rotation 160 or 180 degrees

4) Transport height 11 ft. 10 in. (3.61 m)

0 Overall length, transport 23 it. 5 in. (7.14 m)8 Stabilizer width - transport 7 it. 8 in. (2.34m)«)Stabilizer spread - operating 9 ft. 10 in. (3.00 m)0 Stabilizer overall width - operating 11 it. 4 in. (3.45 m)

0 Width over tires 86 in. (2.62 m)

BACKHOE ~ill)l'With Heavy-Lift5 Ft. (1.52m)ExtendableDipperstick**Retracted

e Loading height, truck loading position 12 it. 1 in. (3.69 m)4) Reach from center of swing mast 19 ft. 3 in. (5.87 m)e Reach from center of rear axle 23 ft. (7.01 m)e Maximumdiggingdepth 15it. 11 in. (4.86m)0 Digging depth (SAE):

(1) 2-ft. (610 mm) flat bottom 15 it. 10 in. (4.82 m)

(2) 8-ft. (2440 mill) flat bottom 14 it. 10 in. (4.51 m)

0 Groundclearance,minimum 13in. (330mm)G Bucketrotation 160or 180degrees4) Transport height 13 ft. 5 in. (4.90 m)0 Overall length, transport 23 ft. (7.01 m)

8 Stabilizer width - transport 7 it. 8 in. (2.34 m)

«)Stabilizerspread- operating 9 it. 10in. (3.00m)0 Stabilizer overall width - operating 11 ft. 4 in. (3.45 m)

0 Width over tires 86 in. (2.62 m)*Backhoespecifications are with 24 in. x 7.5 cu. ft. (610 mm x 0.21 m3)bucket.

**Backhoespecifications are with 24 in. x 8.8 cu. it. (610 mm x 0.25 m3)bucket.

~UIII' LOADERPERFORMANCEWITHBUCKETOPTIONS

Extended

15 ft. (4.58 m)

23 ft. 11 in. (7.29 m)

27 ft. 8 in. (8.43 m)

20ft. lOin. (6.34m)

20 ft. 8 in. (6.30 m)

20ft. (6.09m)13 in. (330 mill)

160 or 180 degrees13 ft. 5 in. (4.90 m)

23 ft. (7.01 m)

7 it. 8 in. (2.34 m)

9 ft. 10 in. (3.00 m)

11 ft. 4 in. (3.45 m)

86 in. (2.62 m)

1.25cu.yd. (0.96m3)Multipurposedual lever

9,700 lb. (43.1 kN)

7,000 lb. (3170 kg)11 ft. 1 in. (3.38 m)

8 it. 7 in. (2.63 m)

43 degrees31 in. (787 mill)

40 degrees5.0 in. (125 mill)4.5 see.

1.0 see.

3.0 sec.

1.25cu.yd.(0.96m3)Multipurposesingle lever9,700 lb. (43.1 kN)

7,000 lb. (3170 kg)11 ft. 1 in. (3.38 m)

8 ft. 7 in. (2.63 m)

45 degrees28.5 in. (724 mill)

40 degrees

5.0 in. (125 mm)4.4 see.

1.0 see.

3.0 see.

I

mEtWith Standard

Dipperstick**

12 it. 7 in. (3.84 m)

19 it. 11 in. (6.07 m)

23 it. 8 in. (7.21 m)16 it. 8 in. (5.07 m)

l~ij>{jiin. (5.03 m)

15 it. 7 in. (4.74 m)

13 in. (330 mill)

160 or 180 degrees

12ft. 4 in. (4.51m)

23 ft. 4 in. (7.11 m)7 it. 8 in. (2.34 m)

9 ft. 10 in. (3.00 m)

11 ft. 4 in. (3.45 m)

86 in. (2.62 m)

III. -