2
C.V Personal Information - Name : Ahmed Fathy Hassan Abdelbary - Nationality : Egyptian - Date of Birth : August 8, 1991 - Place of Birth : Egypt - Sex : Male - Marital Status : Single - Residency : Transferable Residency Article 18 Contact Details - Address : Al Farwaniyah - Kuwait - Mobile : 60932201 - Email : [email protected] Education - Faculty of Engineering , Civil Department - Assuit University / Egypt. - Graduating : June , 2014 - General grade : Good (72.75%) - Graduation project : Reinforced Concrete - Project grade : Excellent Work Experience - From 1/3/2015 to 25/2/2016 at the Engineering Authority of the Egyptian Armed Forces as a site engineer and a quantity surveyor in many projects such as: 1- Constructing two concrete buildings (Hospital and warehouse) 2- Constructing two steel sunshades for cars. 3- Raising efficiency (Rebuilding) three concrete buildings (Officersʹ house , Pilotsʹ house and Air control tower). - From 27/3/2016 to 27/5/2016 at Dema Company for engineering design and construction / Egypt as a quantity surveyor and a site engineer in a project of constructing a school. - From 20/6/2016 till present at Petrocorp Company/ Kuwait as a technical and Site Engineer in Shagaya Renewable Energy Project. Duties and responsibilities Exercising full control over the workforce on site. - - Ensuring that work is executed in accordance with the contract drawings and specifications, agreed procedures and method statements. Page 1 of 2

Eng. Ahmed Fathy C.V

Embed Size (px)

Citation preview

Page 1: Eng. Ahmed Fathy C.V

C.V

Personal Information

- Name : Ahmed Fathy Hassan Abdelbary - Nationality : Egyptian - Date of Birth : August 8, 1991 - Place of Birth : Egypt - Sex : Male - Marital Status : Single - Residency : Transferable Residency – Article 18

Contact Details

- Address : Al Farwaniyah - Kuwait - Mobile : 60932201 - Email : [email protected]

Education

- Faculty of Engineering , Civil Department - Assuit University / Egypt. - Graduating : June , 2014 - General grade : Good (72.75%) - Graduation project : Reinforced Concrete - Project grade : Excellent

Work Experience

- From 1/3/2015 to 25/2/2016 at the Engineering Authority of the Egyptian Armed Forces as a site engineer and a quantity surveyor in many projects such as:

1- Constructing two concrete buildings (Hospital and warehouse) 2- Constructing two steel sunshades for cars. 3- Raising efficiency (Rebuilding) three concrete buildings (Officersʹ house , Pilotsʹ house and Air control tower).

- From 27/3/2016 to 27/5/2016 at Dema Company for engineering design and construction / Egypt as a quantity surveyor and a site engineer in a project of constructing a school.

- From 20/6/2016 till present at Petrocorp Company/ Kuwait as a technical and Site Engineer in Shagaya Renewable Energy Project.

Duties and responsibilities

Exercising full control over the workforce on site.- - Ensuring that work is executed in accordance with the contract drawings and

specifications, agreed procedures and method statements.

Page 1 of 2

Page 2: Eng. Ahmed Fathy C.V

- Preparation of designated procedures. - Monitoring all sub-contractors work closely to ensure that the quality of the work is as per

specifications and is completed on time. - Achieving construction activities like Excavation, Foundation, Shuttering, Steel fixing, Casting concrete, Masonry for brick works and Plastering tile fixing, Etc.. up to completion. - Independently following with design engineers of architecture and structural updated drawing for minor changes, as per site requirement needed and inspection before casting Columns, Slabs, Etc… - Looking after construction activities and facilitating the arrangement procurement of construction materials. - Execution of civil, interior and exterior ground finishing works and site supervision. - Ensuring that all information on drawings is conveyed to the workforce in a proper manner. - Creating engineering design plans, by hand or with computer aided design (CAD and Revit) software. - Making Traceability of concrete and steel reinforcement for all construction elements. - Making shop drawing for all construction elements. - Perform other duties and responsibilities as may be assigned from time to time.

I have good experience in structural engineering design applications. : Note*

Courses

- ICDL - AutoCAD 2D - Revit Structure - SAP 2000 - ETABS - SAFE - Primavera - CSI Column

Languages

- Arabic - English : V.Good

Objectives

I am self-motivated, ambitious and eager to learn. I am a responsible individual with strong communication skills and work ethics besides being creative, focused and highly determined. I am willing to take responsibility and work independently. At the same time, I can work well in teams. Looking for both personal and professional growth makes me capable of working confidently under pressure. Being bilingual gives me the chance to function efficiently in both English and Arabic. My background and growing up experience has given me a deep insight in the culture and society together with a wider scope in the world of business.

Page 2 of 2