Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
QUICKSTARTGUIDE
eNetSMARTHOMEconnect
2
CONTENTS
Preparation Page 3
Creating a project Page 6
Creating a building structure Page 7
Searching for devices Page 9
Adding devices to a selected room and configuring them Page10
- Device configuration using the example of a wall transmitter Page11
- Device configuration using the example of a switch actuator Page13
Creating connections Page15
Programming the project in devices Page23
Finalizing the project Page24
3
Ensure that
•alleNetdevicesarealreadyinstalled.
•theoperatingmodeselectorswitchissetto“PC”:
•theprogrammingbuttonisaccessible,oralternativelythemainsvoltagecanbeswitchedoffasdesired.
•allbatteriesareinsertedanddeviceswithbatteriesarecharged(e.g.solarsensor).
•theeNetserverisconnectedtothemainsvoltageandtotherouterviaanetworkcable.
•PCortabletwithwebbrowserarealsointhesamenetwork.
•eNetserverandsmartphoneareinthesamenetwork.
•youhavedownloadedtheeNetSMARTHOMEapptoyourmobilephone.
PREPARATION
10:05
4
Open the eNet SMART HOME appand connect to the eNet server.
Enter the displayed IP address in
the web browser(PC or tablet).
192.168.188.189/.....
PREPARATION
Log on
Username admin
Password admin
Show password
Stay logged on
English Log on
English
Start commissioning
Logged on
Log offadmin
Start commissioning
192.168.188.189/..... 192.168.188.189/.....
5
Log onto the PC or tablet with user-
name “admin”and password “admin”
PREPARATION
Create project
Change password
Old password ••••••
New password •••••• Retype password ••••••
Show password
Date and time
Time 10:05
Time zone
Transfer current timeDate DD-MM-YYYY
Automatic time (Internet)
Installation location
This information is required for time control in connection with astro functions.
Location Germany Lüdenscheid
Coordinates
Manual
51° 13° 38° N 7° 35° 57° E
Create project
Project name Sample project Import project
(UTC+1) CET - Central European Standard Time
connect Rooms Devices Connections Project Diagnostics
192.168.188.189/.....
Please create a new project.
6
* Location and time data are relevant for automatic functions. “Automatic time” requires an Internet connection
Change the administrator password for security reasons
Select “Automatic time”
To next step
Specify the installation location*
Specify the project name
CREATINGAPROJECT
192.168.188.189/.....
connect Rooms Devices Connections Project Diagnostics
Continue
+ New area / new fl oor
||| Top fl oor
Rooms without area assignment
Bedroom|||
Living room|||
Garden|||
Kitchen|||
Garage|||
Hallway|||
Balcony|||
Children’s room|||
Bathroom||| + New room
+ New room
+ New room
+ New room
Create and edit rooms and areas.
7
Add rooms to fl oors*
Create fl oors in the same order as they are
to appear later on in the app
||| Ground fl oor
||| Outdoors
CREATINGABUILDINGSTRUCTURE
1
4
Go to next step
2
3
* In the case of a fl at, there is no need for you to create fl oors. It is suffi cient to simply add new rooms.
192.168.188.189/.....
connect Devices Connections Project Diagnostics
Ground fl oor
Bedroom Children’s room
Rooms
Bathroom
Please select a room …
Outdoors
Rooms without area assignment
Living room
Garden
Kitchen
Garage
Hallway
Balcony
Top fl oor
8
Select the room the devices you are adding in this step
are installed in
CREATINGABUILDINGSTRUCTURE
192.168.188.189/.....
Device search
Select a room, detect and confi gure devices and channels.
connect Rooms Devices Connections Project Diagnostics
Back
Ground fl oor >> Living room
All devicesStart search
• Start the device search
• Switch the desired devices to pro-gramming mode. You can fi nd in-formation on this in the appropriate operating manuals.
• Select a room and add the desired devices found to the selected room.
• Assign a new device designation and change the channel designation and the channel location, if necessary.
• At the end: End the device search again.
Living room
Add a device for the selected room.
Continue
Catalogue
9
Set the device installed in the selected room to programming mode
SEARCHINGFORDEVICES
Start the device search
2
1
Device search
All devicesStop search
Ground fl oor >> Living room
Living room
Add a device for the selected room.
192.168.188.189/.....
Select a room, detect and confi gure devices and channels.
connect Rooms Devices Connections Project Diagnostics
Back Continue
Catalogue
Wall transmitter, 3-…with inscription sp…Wall transmitter
+
Centre plate for bli…controlCover1
+
+1
Centre plate
Cover
+1
Switch/push-buttonactuator 1-gang miniMini (fl ush-mounted)
10
Stop the search as soon asall devices have been found
ADDINGANDCONFIGURINGDEVICES
All devices
Switch/push-buttonactuator 1-gang mini
Add devices to the selected room
Colour legend
Nodeviceaccess
DevicenotaccessibleorinaninvalidName
Devicenotprogrammedorchangesexist
Deviceprogrammed,nochangesexist
192.168.188.189/.....
connect Connections Project DiagnosticsRooms
Device and channels Advanced device settings
Wall transmitter, 3-…with inscription sp…Wall transmitter
DEVICE LOCATION Living room
DEVICE DESIGNATION
Door area
Ceiling light
CHANNEL NAME CHANNEL LOCATION FUNCTION OPERATING MODE
Living room
Roller shutters Living room
Scene 1 Living room
Scene 2 Living room
...
...
App use
App use
1
3
5
6
CloseSaveProgram deviceShift device
Devices
11
ADDINGANDCONFIGURINGDEVICESDEVICECONFIGURATIONUSINGTHEEXAMPLEOFAWALLTRANSMITTER
Specify the purpose or function of the
transmitter channel
Save entries
Name the transmitter channels according to their
function (this labelappears in the app)
Name the installation position of the transmitter
Device search Catalogue
All devicesStop search
Ground fl oor >> Living room
192.168.188.189/.....
Add devices and edit their settings.
connect Rooms Devices Connections Project Diagnostics
Back Continue
Centre plate for bli…controlCover1
+
+1
Centre plate
Cover
+1
Switch/push-buttonactuator 1-gang miniMini (fl ush-mounted) Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
12
Add other devicesneeded in the room
ADDINGANDCONFIGURINGDEVICES
192.168.188.189/.....
connect Connections Project DiagnosticsRooms
Device and channels Advanced device settings
Window
FUNCTION OPERATING MODE
Living room1
CloseSaveProgram deviceShift device
Centre plate for b…controlCover
DEVICE LOCATION Living room
DEVICE DESIGNATION
Window
Please select
Roller shutters
Awning
Blind
1
Devices
CHANNEL NAME CHANNEL LOCATION
13
Specify the function and operating mode of the actuator channel
Name the actuator channels according to
their function (this labelappears in the app)
Select a room in which the channel is active
ADDINGANDCONFIGURINGDEVICESDEVICECONFIGURATIONUSINGTHEEXAMPLEOFASWITCHACTUATOR
Save entries
Name the Installation position of the actuator
Add devices and edit their settings.
connect Rooms Devices Connections Project Diagnostics
Back Continue
Device search Catalogue
All devices Start search
Ground fl oor >> Living room
1
1
• Start the device search
• Switch the desired devices to program-ming mode. You can fi nd information on this in the appropriate operating manuals.
• Select a room and add the desired devices found to the selected room.
• Assign a new device designation and change the channel designation and the channel location, if necessary.
• At the end: End the device search again.
192.168.188.189/.....
2
Living room
Living room
Window
Balcony door
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
Centre plate
Cover
14
To next step
Confi gure alldevices in this way,
room for room
ADDINGANDCONFIGURINGDEVICES
Continue
Create and edit connections between devices.
connect Rooms Devices Connections Project Diagnostics
Back Continue
All devices Ground fl oor >> Living room
Living room
Add a new connection.
+ New connection
Living room (Ground fl oor) [3]
192.168.188.189/.....
2
1
1
Living room
Living room
Window
Balcony door
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
Centre plate
Cover
15
Select theroom overview
CREATINGCONNECTIONS
192.168.188.189/.....
connect Devices Connections Project Diagnostics
Ground fl oor
Bedroom Children’s room
Rooms
Bathroom
Please select a room …
Outdoors
Rooms without area assignment
Living room
Garden
Kitchen
Garage
Hallway
Balcony
Top fl oor
16
* The selection of the room is only intended to provide a better overview within the project.
Select a room in which the connections
are to be created*
CREATINGCONNECTIONS
Back Continue
All devices Ground fl oor >> Living room + New connection
Living room (Ground fl oor) [3]
connect Rooms Devices Connections Project Diagnostics
192.168.188.189/.....
2
Living room
Add a new connection.
1
1
Living room
Living room
Window
Balcony door
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
Centre plate
Cover
Create and edit connections between devices.
17
* Connections are created, e.g. for the use of hand-held and wall-mounted transmitters
CREATINGCONNECTIONS
+ New connection Create a newconnection*
Create and edit connections between devices.
connect Rooms Devices Connections Project Diagnostics
Back Continue
Ground fl oor >> Living room
Sensors Actuators
Roller shutters
Delete Shift Program
Add actuators.Add sensors.
You can also program connections in groups at the end of commissioning. To do this, you can simply exit this page or create an additional connection. All the data is saved automatically.
+ New connection
2
192.168.188.189/.....
All devices
Living room (Ground fl oor) [3]
1
1
Living room
Living room
Window
Balcony door
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
Centre plate
Cover
+
+
+
18
Select a wall transmitter whose
channel is to be used in the connec-
tion for operation
Name the connectionsaccording to their function
CREATINGCONNECTIONS
192.168.188.189/.....
connect Connections Project DiagnosticsRooms Devices
Select channels
Ceiling light
Roller shutters
Living room Rocker
RockerLiving room
1
3
CancelApply
FUNCTION
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
CHANNEL NAME CHANNEL LOCATION
19
Select the requiredtransmitter channel
Apply theconnections
CREATINGCONNECTIONS
All devices
Living room (Ground fl oor) [3]
1
1
Living room
Living room
Window
Balcony door
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
Centre plate
Cover
+
+
+
connect Rooms Devices Connections Project Diagnostics
Back Continue
Ground fl oor >> Living room Roller shutters
Bitte fügen Sie Actuators hinzu
+ New connection
3
Actuators
Delete Shift Program
Roller shutters
Sensors
192.168.188.189/.....
3
Door area
Living room
Create and edit connections between devices.
Wall transmitter, 3-…with inscription sp…Wall transmitter
You can also program connections in groups at the end of commissioning. To do this, you can simply exit this page or create an additional connection. All the data is saved automatically.
3
20
Add the actuator whose channel is to be active in the
connection
CREATINGCONNECTIONS
192.168.188.189/.....
connect Connections Project DiagnosticsRooms Devices
Select channels
Window Living room Roller shutters1
CancelApply
FUNCTION
1
Living room Window
CHANNEL NAME CHANNEL LOCATION
Centre plate for blinds control
Cover
21
CREATINGCONNECTIONS
Select the actuator channel
Apply theconnections
connect Rooms Devices Connections Project Diagnostics
Back Continue
3
Ground fl oor >> Living room + New connection
3
Sensors Actuators
Delete Shift Program
Window1
1
192.168.188.189/.....
Door area Window
Living room
All devices
Living room (Ground fl oor) [3]
Living room Door area
Wall transmitter, 3-…with inscription sp…Wall transmitter
Create and edit connections between devices.
You can also program connections in groups at the end of commissioning. To do this, you can simply exit this page or create an additional connection. All the data is saved automatically.
1
1
Living room
Living room
Window
Balcony door
Centre plate for bli…controlCover
Centre plate
Cover
+
+
Roller shutters
Wall transmitter, 3-…with inscription sp…Wall transmitter
Centre plate for bli…controlCover
+
Roller shutters Living room 3
22
Proceed in this manner until all desired connections are created, then continue with the next step
CREATINGCONNECTIONS
Changes have been made that can be programmed into the system:
4 devices and 2 connections have not yet been programmed.
Project name Sample project
Notes
connect Rooms Devices Connections Project Diagnostics
Back
Program project
Last change DD-MM-YYYY 10:05:00
Radio communication between the eNet devices is not encrypted.
You can create additional users for the eNet system in the user administration. You can also reach this via the System menu or the log-in screen.
Activate encryption
Create project report
Export projectImport project
Compare project
Delete project
To user administration
3
192.168.188.189/.....
Program all the changes, create the project report and backup the project.
23
Activate the encryptionand create project report and backup copy
Create additional users
PROGRAMMINGTHEPROJECTINDEVICES
3
Program thedevices, settings and connections
2
1
4
5
Changes have been made that can be programmed into the system:
4 devices and 2 connections have not yet been programmed.
Project name Sample project
Notes
connect Rooms Devices Connections Project Diagnostics
Back
Program project
Last change DD-MM-YYYY 10:05:00
Radio communication beween the eNet device is not encrypted.
You can create additional users for the eNet system in the user administration. You can also reach this via the System menu or the log-in screen.
Activate encryption
Create project report
Export projectImport project
Compare project
Delete project
To user administration
3
192.168.188.189/.....
Program all the changes, create the project report and backup the project.
24
Close thecommissioning
FINALIZINGTHEPROJECT
Stan
d 06
/201
7
www.enet-smarthome.com
GiraGiersiepenGmbH&Co.KGDahlienstrasseP.O.Box122042477RadevormwaldGermanyTel. +4921956020Fax [email protected]&Co.KGVolmestraße158569SchalksmühleGermanyTel. +492355806553Fax +492355806254www.jung.deinternational@jung.deInstaGmbHHoheSteinert10P.O.Box183058468LüdenscheidGermanyTel. [email protected]
TechnicaladviceGiraTel +492195602123Fax [email protected]
TechnicaladviceJungTel +492355806555Fax [email protected]