EnergyDistribution

www.hagerbr.com.au

Catalogue

1011

1

DisclaimerWhilst Hager B&R has made every effort to ensure that all information contained herein is correct at the time of printing, we reserve the right, to improve or modify product specifications as and when necessary, without prior notification.

1011

Catalogue

Energy distribution

All hager loadcentres have been developed with a strong aesthetic design integrating unique features as a result of feedback from homeowners, electrical contractors and house builders.With pre-configured and configurable variants available, choice comes as standard. So, whether you require a 48 pole, IP56 rated panelboard or a 24 pole, flush mounted loadcentre, there’s sure to be a hager enclosure to suit your application.

Loadcentres

D.1

Load

cent

res

Guide to the hager enclosure system D.2

GD surface mounted enclosures D.4

VM plastic enclosures D.5

GT plastic enclosures D.6

VT metal enclosures D.7

Golf plastic enclosures D.8

Vega plastic enclosures D.11

Vector plastic enclosures D.12

Automation enclosures D.13

Vega D accessories D.14

Package enclosures D.15

D.2

Guide to the hager enclosure system

Villas / TownhouseResidence

Free standingResidence

CommercialResidence

IP30

Mini Gamma Series

Page D.4

VM Series1-4 I

Page D.5

GT Series6-10 I

Page D.6

Vega Series18-72 I

Page D.11

IP40

Mini Gamma Series

Page D.4

Golf4-36 I flush/surface

Page D.8

Golf VC18-54 I - flush

Page D.10

IP41


Page D.8

Vega Series18-72 I

Page D.11

Vega D Series96 - 168 I

Page D.13

Vega Series18-72 I

Page D.11

IP42

Jyka 25018-72 pole

Page E.3

IP56

Jyka IP18-72 pole

Page E.5

IP65

Vector Series36-36 I

Page D.12


Page D.12

IP66

Jyka IP18-72 pole

Page E.5

D.3

Load

cent

res

Commercial Office / Retail Industrial Complex

VT Series9-48 I - flush / surface

Page D.7

Jyka XL24-48 pole

Page E.2

VT Series9-48 I - flush / surface

Page D.7

Jyka XL24-48 pole

Page E.2


Page D.8

Golf VC18-54 I - flush

Page D.10

Vega Series18-72 I

Page D.11


Page D.13

Vega Series18-72 I

Page D.11


Page D.13

Jyka 25018-72 pole

Page E.3

Jyka 25018-72 pole

Page E.3

Jyka IP18-72 pole

Page E.5

Jyka IP18-72 pole

Page E.5


Page D.12


Page D.12

Jyka IP18-72 pole

Page E.5

Jyka IP18-72 pole

Page E.5

D.4 Subject to technical change.

A

B

GP106P

GD104T

VZ313

GP110T

GD surface mounted enclosures IP30

Technical information

Mini Gamma1 row enclosure for 2 to 10I surface mounted with a rigid

chassis housing, a 47mm DIN rail.

- facility for cover to be sealed.

- cover fixed by quarter turn screws

- IP40 with door installed

Options:- opaque or transparent doors- key lock- pole fillers - JP011- for technical details refer to

hager B&R

description width in I17.5mm

catref.

1 row, 2I 2 GD102T

1 row, 4I 4 GD104T

1 row, 6I 6 GD106T

1 row, 8I c/- earth / neutral links

8 GD108T

1 row, 10I c/- earth / neutral links

10 GD110T

Accessoriesopaque doors

suits GD102Tsuits GD104Tsuits GD106Tsuits GD108Tsuits GD110T

GP102P GP104P GP106P GP108P GP110P

transparent doors

suits GD102Tsuits GD104Tsuits GD106Tsuits GD108Tsuits GD110T

GP102T GP104T GP106T GP108T GP110T

locking kitspare keys

VZ313 VZ312

references enclosure size

width height depth

row A B CGD102T 1 55 160 75GD104T 1 110 180 75GD106T 1 148 180 75GD108T 1 182 180 75GD110T 1 218 180 75

D.5Subject to technical change.

Load

cent

res

VM04C

VM01C

42

153

A

B

VM surface mounted enclosures IP30Series VM1 row covers for 1 to 4Imonobloc chassis and cover of insulating material. Fixed DIN rail for devices of a shoulder measurement of 47mm.

Options:- Pole fillers JP011, PF6TR- facility to be sealed- colour: RAL9001- cover fixed by screws- for technical details refer to

hager B&R


catref.

1 row, 1I 1 VM01C

1 row, 2I 2 VM02C

1 row, 4I 3 - 4 VM04C

references enclosure sizerow width height depth

A B CVM01C 1 23 155 65VM02C 1 40 155 65VM04C 1 82 155 65



B

A

D

A

B

GT06A

GT09A

GT surface mounted enclosures IP41Series GT1 row enclosures for 6 to 18IThis enclosure range is designed with ample wiring room and a separate soft fireproof back for easy entry of cables

Options:- Pole fillers JP011, PF6TR- doors- colour: RAL9001- supplied with:

- links- forked busbar- circuit ID labels

- for technical details refer to hager B&R

description pole fillers width in I17.5mm

catref.

1 row, 6I x 2 6 GT06A

1 row, 9I x 3 9 GT09A

1 row, 12I x 4 12 GT12A

1 row, 18I x 6 18 GT18A

1 row, 10I x 5 10 GD10

doors to suit

suits GT06A - opaque doorsuits GT06A - transparent door

GP06P GP06T


GP09P GP09T


GP12P GP12T


GP18P GP18T

references enclosure size

width height depth

row A B CGT06A 1 134 210 100GT09A 1 188 210 100GT12A 1 242 210 100GT18A 1 350 210 100GD10 1 250 140 65GD1OLN 1 250 140 65



Load

cent

res

VT24F

VT24S

A

B

A

B

VT metal surface and flush mounted enclosures IP30


catref.

1 row, surface mount1 row, surface mount1 row, surface mount2 rows, surface mount3 rows, surface mount4 rows, surface mount

x 3 x 4 x 6 x 8 x 12 x 16

91218243648

VT09S VT12S VT18S VT24S VT36S VT48S

1 row, flush mount1 row, flush mount1 row, flush mount2 rows, flush mount3 rows, flush mount4 rows, flush mount

x 3 x 4 x 6 x 8 x 12 x 16

91218243648

VT09F VT12F VT18F VT24F VT36F VT48F

doorsoptional extra - with easy knockout for additional lock

suits VT09S, VT09Fsuits VT12S, VT12Fsuits VT18S, VT18Fsuits VT24S, VT24Fsuits VT36S, VT36Fsuits VT48S, VT48F

VT041 VT042 VT043 VT044 VT045 VT046

lockoptional extra - Key lock suits all VT series enclosures LCLK

VT Surface references*Door = 22mm

enclosure sizes

row width height depthA B

VT09S 1 254 245 71VT12S 1 304 254 71VT18S 1 412 254 71VT24S 2 364 414 71VT36S 3 364 604 71VT48S 4 460 745 71

VT Flush references*Door = 22mm

enclosure sizeswall box escutcheon

row width height depth width heightVT09F 1 254 245 62 304 304VT12F 1 304 254 62 354 304VT18F 1 412 254 62 462 304VT24F 2 362 414 62 414 464VT36F 3 364 604 62 414 654VT48F 4 460 745 62 514 799

Series VT1 to 4 rows for 9 to 48Ithis range of enclosures has been designed for applications that require a robust construction.

Options:- Pole fillers JP011, PF6TR- doors- key locks- material: 1.0mm zinc anneal- colour: RAL9016- supplied with:





VS12PT

VS04PT

VZ311

��

�

�

��

�

Golf surface mounted enclosures IP41IP41 surface mounted enclosures1 to 3 rows, 4 to 36 modules. Enclosures are of an insulating material coloured RAL9010.Fixed DIN rail for devices of a maximum shoulder measurement of 47mm. Distance between rails 125mm. Reversible door opening 1800.

Options:- Pole fillers JP011- keylock- colour: RAL9010- supplied with:

- links (63A rated)- forked busbar- circuit ID labels



catref.

1 rowopaquetransparent

x 2 4 VS04PT VS04TT


x 2, x 1 8 VS08PT VS08TT






x 12, x 2 36 VS36PT VS36TT

keylock to suit all golf enclosures VZ311

dimension (mm) fixingA B D E F

VS04.. 1 row 4 130 180 84 90 140

VS08.. 1 row 8 200 180 84 120 140

VS12.. 1 row 12 275 225 95 205 160

VS24.. 2 rows 12 275 350 95 205 285

VS36.. 3 rows 12 275 500 95 205 410



Load

cent

res

VF12PT

VF24PT

��

�

�

�

�

�

�Golf flush mounted enclosures IP41


catref.


x 2 4 VF04PT VF04TT


x 2, x 1 8 VF08PT VF08TT






x 12, x 2 36 VF36PT VF36TT


earthed metal back plate to suit 12 pole VFBP12

earthed metal back plate to suit 24 pole VFBP24

IP41 flush mounted enclosures1 to 3 rows, 4 to 36 modules. Enclosures are of an insulating material coloured RAL9010.Fixed DIN rail for devices of a maximum shoulder measurement of 47mm. Distance between rails 125mm reversible door opening 1800.

Options:- Pole fillers JP011- keylock- IP 41- colour: RAL9010- supplied with:

- links (63A rated)- forked busbar- circuit ID labels


references dimension (mm) wall boxA B C D E F

VF04.. 1 row 4 162 220 73 90 122 177

VF08.. 1 row 8 250 230 67 94 209 189

VF12.. 1 row 12 322 265 70 97 281 224

VF24.. 2 rows 24 322 390 70 97 281 349

VF36.. 3 rows 36 322 535 70 97 281 491



VC18PT

VC36TT

VZ311

B

H H

B

E

150

D

T

Golf flush mounted enclosures IP41IP41 flush mounting enclosures1 to 3 rows, 18 to 54 modules. Enclosures are of an insulating material coloured RAL 9010.Adjustable DIN rail for devices of a maximum shoulder measurement of 47mm. Reversible door opening 180o

Supplied with:- links - busbar- circuit ID labels- pole fillers- for technical details refer to

hager B&R

description characteristics width in I17.5mm

door catref.

1 row x 7 x 1 18 opaquetransparent

VC18PT VC18TT


VC36PT VC36TT


VC54PT VC54TT


earthed metal back plate to suit 18 pole VCBP18

references dimensions (mm)cut-out sizes enclosure

row H B H B T D EVC18PT 18 1 295 390 335 430 70 74 13VC18TT 18 1 295 390 335 430 70 74 13VC36PT 36 2 445 390 485 430 70 74 13VC36TT 36 2 445 390 485 430 70 74 13VC54PT 54 3 595 390 635 430 70 74 13VC54TT 54 3 595 390 635 430 70 74 13



Load

cent

res

135A

E

150150

H FG

VB36TT

VB18PT

Vega surface mounted enclosures IP41

description characteristics

width in I17.5mm

catref.


x 4, x 1 8 VB18PT VB18TT


x 8, x 2 36 VB36PT VB36TT


x 12, x 3 54 VB54PT VB54TT


x 16, x 4 72 VB72PT VB72TT

keylock for transparent or opaque doors

supplied with 2 keys VZ310

references dimension(mm)fixing

A B E F GVB18 18 370 300 300 236 32

VB36 36 370 450 300 386 32

VB54 54 370 600 300 536 32

VB72 54 370 750 300 686 32

IP40 surface mounted enclosureswith transparent or opaque doors. 1 to 4 rows, 18 to 72 modules. Enclosures are of an insulating material coloured RAL9010 white. The enclosures feature a removable chassis with DIN rails for ease of installation. Top and bottom cable entry plates are removable and interchangeable. The door is also reversible with an integral flush handle.

Options:- Pole fillers JP011- door lock- colour: RAL9010- supplied with:





VE212H

F

151

73,5

59

47,5

A

H 150

E

Vector enclosures - IP65Surface mounted enclosures with transparent doors1 to 2 rows, 6 to 36 I- adjustable DIN rail for

shoulder measurement 47 and 63mm

- transparent hinged door- 2 lateral knockouts for cable

entry- supplied with:


- pole fillers - JP010- premarked knock outs for

bushes or cable glands M20, M25, M32, M40 and M50; supplied with IP54 cable glands

- colour: RAL7035- sealable cover- reversible door- for technical details refer to

hager B&R


catref.

1 rowsupplied cable glands2xM20 + 2xM25 + 1xM32

4 + 2 VE106H


8 + 2 VE110H


12 VE112H


24 VE212H


18 VE118H

2 rowsupplied cable glands 8xM20 + 14xM25 + 1xM32

36 VE218H

keylock supplied with 2 keys VZ311

references enclosure sizes fixingrow A B E F

VE106H 6 1 165 190 108 158VE110H 10 1 237 210 180 173VE112H 12 1 310 302 230 155VE212H 24 2 310 427 230 280VE118H 18 1 418 302 338 155VE218H 36 2 418 452 338 305


D.13

Load

cent

res

FD52D

FU72D

JKD144D

XLD90

3D solutions system - automation enclosuresVega D, Jyka D & XLD enclosures- The 3D System consists

of three enclosure ranges, Vega D, Jyka D and XLD. Each of the three ranges have been designed to complement the vast array of installations.

- The Vega D is available in either surface or flush mounting configurations, while the Jyka D, and XLD are surface mounted versions.

Modular Distribution Enclosures

- All 3D products conform to the various DIN and enclosure standard and are in modular rows of either 24 or 18 modules

- Vega D enclosures are configured from 4-7 rows of 24 modules (96 -168 ) They combine sheet metal and injected plastic so as to achieve a light yet strong enclosure.

- An additional internal insulation guarantees class II

isolation.- The Jyka D has 4-6 rows of

24 modules (96 -144 ) while the XLD has 5 rows of 18 modules (90 ).

- Colour RAL 9002.- for technical details refer to

hager B&R

description characteristics height catref.

Vega D Surfacewithout doorw. 550mm x d. 185mm

4 rows (96 )1x(5x25mm2 + 17x4mm2)

700mm FD42D

5 rows (120 )1 x (5x25mm2 +17x4mm2)1 x (6x25mm2 + 20x4mm2)

850mm FD52D

6rows (144 )3 x (6x25mm2 + 20x4mm2)

1000mm FD62D

7 rows (168 )3 x (6x25mm2 + 20x4mm2)

1150mm FD72D

Vega D Flushwithout doorw. 600mm x d. 152mmframe width 40mm

4 row (96 )1 x (5x25mm2 + 17x4mm2)

800mm FU42D

5 rows (120 )1 x (5x25mm2 + 17x4mm2)1 x (6x25mm2 + 20x4mm2)

950mm FU52D

6 rows (144 )3 x (6x25mm2 + 20x4mm2)

1150mm FU62D

7 rows (168 )3x (6x25mm2 + 20x4mm2)

1350mm FU72D

Jyka D Surfacewith doorw. 560mm x d. 166mm

4 rows (96 ) 750mm JKD96

6 rows (144 ) 970mm JKD144

XLD Surfacewith doorw.481mm x d. 130mm

5 rows (90 ) 765mm XLD90

D.14

FD52T FD52P

FZ497

UD22C2

UZ50A1

VZ405

KN00A

KN22N

UZ25V1

UZ25V2

UZ01V1

Vega D accessories

description characteristics catref.

Door options

Transparent doors reversible

for surface and flush

enclosures. Sheet metal,

powder coated.

c/- 3mm hardened glass

* inclusion of door provides

IP41

To suit FD42D or FU42D




FD42T

FD52T

FD62T

FD72T

Plain door

reversible for surface and

flush enclosures. Sheet metal

and powder coated

* inclusion of door provides

IP41





FD42P

FD52P

FD62P

FD72P

Locks

To replace the standard lock lock, key No. 1242E FZ497

Circuit schedule holder FZ794

Terminals

Universal support to mount terminal blocks KN00A

Neutral terminal blocks

terminal block

terminal block

terminal block

terminal block

terminal block

terminal block

2x25mm2 + 8x4mm2 terminal





bridging clip x 10

KN10N

KN14N

KN18N

KN22N

KN26N

KN99N

Earth terminal blocks

terminal block

terminal block

terminal block

terminal block

terminal block

terminal block






bridging clip x 10

KN10E

KN14E

KN18E

KN22E

KN26E

KN99E

Phase terminal blocks

terminal block

terminal block

terminal block

terminal block

terminal block

terminal block






bridging clip x 10

KN10P

KN14P

KN18P

KN22P

KN26P

KN99P

Gear tray module

(not suitable for flush

enclosures)

415mm x 235mm UD22C2

Cable management accessories

Cable management retainer

* Not suitable for flush

enclosures

(x20) large UZ25V1

Cable management retainer (x20) small UZ25V2

Retainer support / exten arms (x20) UZ01V1

Support arms

for DIN rail / trunking (x2) UZ50A1

DIN rail to suit Vega D UZ38D1

Mounting anchors (x4) VZ405

for plaster walls to suit flush enclosures

D.15

Load

cent

res

JT202

Package enclosures

Descriptionfor applications where an RCCB is being added to an existing installation or where other DIN type fixing facilities are not available.

To overcome this problem we present a range of RCCBs complete with DIN rail enclosures and where necessary an integral neutral link for up to three circuits.

This range has been designed for ease of installation and ease of ordering.

description residualcurrentIrn

currentrating (A)

width in I17.5mm

cat.

ref

2 pole RCCB complete with enclosure and 2 holes neutral link

30mA 40A 2 JT201

2 pole RCCB complete with enclosure

30mA 40A 2 JT202


30mA 63A 2 JT203

4 pole RCCB complete with enclosure

30mA 40A 4 JT204


30mA 40A 4 JT205

The Jyka series of panelboards are designed for ease of installation, maximising internal space and presenting commercially required aesthetics. Regardless of specifications, the XL, Series 2, and IP ranges meet and surpass the growing demands of the industry.

Energy distributionPanelboards

E.1

Pan

elb

oard

s

Jyka XL series panelboards E.2

Jyka 250 series 2 panelboards E.3

Jyka IP series panelboards E.5

Jyka SS series panelboards E.7

E.2 Subject to technical change.

JK48XL

W

DH

Jyka XL series panelboardsThe Jyka XL series of panelboards are the recommended solution when both installation and economic constraints arise- 18 poles DIN standard- type tested busbar- neutral and earthbar- colour: RAL9002- 1.6mm construction- removable gland plates- AS/NZS3439.1

- lockable door- circuit schedule card- separate escutcheon & door- Australian made- for technical details refer to

hager B&R

NEW IMPROVED CHASSIS- extra moulding on chassis

shoulders provides a positive alignment point for the breakers and the escutcheon cutout.

- push the breaker into the chassis until it stops then tighten to guarantee correct alignment

description catref.

24 way panelboard JK24XL



incoming devices

loadbreak switch JK16S/C

160A 3 pole DIN rail mounted loadbreak switch & connection kit

loadbreak switch JK20S

200A 3 pole DIN rail mounted loadbreak switch & connection kit

accessories

extension box

complete with 18 modules of DIN space JK00XL

flush surround

to suit JK24XLto suit JK36XLto suit JK48XL

JKFL1/XL JKFL2/XL JKFL3/XL

polefillers

6 pole PF6TR

chassis finger cap (10 pack) JK90B

chassis shroud caps (2 pack) JK91B

dimensionscat. ref. height H width W depth DJK24XL 658 481 130JK36XL 765 481 130JK48XL 872 481 130

extension boxJK00XL 350 481 130


E.3Subject to technical change.

Pan

elb

oard

s

JKS18P

JKS36P

H

W

D

Jyka 250 series 2 panelboardsDesigned for ease of installation and maximising internal space while presenting commercially required aesthetics, the Jyka 250 series of panelboards is recommended for internal commercial applications.- type tested busbar- neutral and earthbar- colour: RAL9002- 1.6mm construction- removable gland plates- AS/NZS3439.1

- separate hinged escutcheon and door

- removable mounting pan- lockable door- reversible door- circuit schedule card- cable tie anchors- Australian made- custom built options- custom lock options- IP42- for technical details refer to

hager B&R




description catref.

18 way panelboard24 way panelboard30 way panelboard36 way panelboard42 way panelboard48 way panelboard60 way panelboard72 way panelboard

JKS18P JKS24P JKS30P JKS36P JKS42P JKS48P JKS60P JKS72P

incoming devices

connection kits - kits only, excluding switchgear

for 250A MCCB in the top centre position c/- cable zone enclosure JK16K

for 80/100A ‘SB’ switches (SB380/SB399) in the top centre position JK11S

for 80/100A MCB in the lower left & right position, includes cable & hardware

JK12S

for 80/100A MCB’s in the top centre includes busbar & hardware JK15S

connection kits - including switchgear160A 3 pole loadbreak switch & connection kit 200A 3 pole loadbreak switch & connection kit 225A 3 pole loadbreak switch & connection kit 250A 3 pole loadbreak switch & connection kit

JK16S/C JK20S JKS22S/B JKS25S

outgoing devices

connection kit - kit only, excluding switchgearfor 160A 3 pole MCCB in the lower position, includes cable & hardware JK15K

dimensions

cat. ref. height H width W depth D

JKS18P 750 560 166

JKS24P 750 560 166

JKS30P 860 560 166

JKS36P 860 560 166

JKS42P 970 560 166

JKS48P 970 560 166

JKS60P 1200 560 166

JKS72P 1200 560 166

extension box

JKS00E 350 560 166


E.4

PF6TR

LT052

Jyka 250 series 2 panelboards

description catref.

accessories for Jyka 250 series

pole fi llers

6 pole PF6TR

chassis caps & shrouds

chassis finger cap, 10 pack

chassis shroud caps, 2 pack

JK90B

JK91B

extension box

empty enclosure to house mounting kits JKS01E, JKS02E & JKS03E

JKS00E

joining plateFor joining 2 Jyka panels together JK/GP

extension box mounting kits

to suit 18 modules of DIN

to suit LT052 fuse carrier - 160A

to suit LT150 fuse carrier - 250A

cable zone top mount

to suit 36 modules of DIN

JKS01E

JKS02E

JKS05E

JKS06E

JKS07E

flush surrounds

to suit JKS18P and JKS24P




JKSFL1

JKSFL2

JKSFL3

JKSFL4

fuse carriers

fuse carrier to suit size 00/160A DIN blade fuses



cable clamps to suit LT052 (6-70mm2)

cable clamp to suit LT150 (70-150mm2)

cable clamps to suit LT250 (120 - 240mm2)

LT052

LT150

LT250

LZ051

LZ151

LZ152

DIN blade fuses

available on request

chassis

18 way double-ended

24 way double-ended

30 way double-ended

36 way double-ended

42 way double-ended

48 way double-ended

60 way double-ended

72 way double-ended

JK18C

JK24C

JK30C

JK36C

JK42C

JK48C

JK60C

JK72C

18 way single-ended

24 way single-ended

36 way single-ended

48 way single-ended

JK18C1

JK24C1

JK36C1

JK48C1

chassis rating

250A

250A

rated short time

18kA 0.2sec

10kA 1.0sec

peak withstand current

36kA17kA


Pan

elb

oard

s

JK24IP

�

�

�

Jyka IP series panelboardsDesigned and constructed for use in locations that require the highest levels of protection from the surrounding environment.- type tested busbar- neutral and earthbar- colour: RAL9002- 1.6mm construction- removable gland plates- IP56 (IP66 available upon

request)

- AS/NZS3439.1- lockable door- separate hinged escutcheon

and door- circuit schedule card- cable tie anchors- Australian made- custom built options- custom lock options





description catref.

$ex-GST

$incl-GST

18 way panelboard24 way panelboard30 way panelboard36 way panelboard42 way panelboard48 way panelboard60 way panelboard72 way panelboard

JK18IP JK24IP JK30IP JK36IP JK42IP JK48IP JK60IP JK72IP

incoming devices


for 250A MCCB in the top centre position for 80/100A ‘SB’ switches in the top centre position for SB380 + SB390 in the lower position, includes cable & hardwarefor 80/100A MCB’s in the top centre includes busbar & hardware

JK17K JK11S JK12S JK15S



outgoing devices

connection kit - kit only, excluding switchgear

for 160A 3 pole MCCB in the lower position, includes cable & hardware JK15K

dimensions

cat. ref. height width depth

JK18IP 750 600 250

JK24IP 750 600 250

JK30IP 860 600 250

JK36IP 860 600 250

JK42IP 970 600 250

JK48IP 970 600 250

JK60IP 1200 600 250

JK72IP 1200 600 250

extension box

JKE/IP 350 600 250

JK2IE/IP 350 600 250


E.6

LT052

PF6TR

Jyka IP series panelboards

description catref.

accessories for Jyka IP series

pole fi llers

6 pole PF6TR

chassis caps & shrouds

chassis finger cap, 10 pack

chassis shroud caps, 2 pack

JK90B

JK91B

extension box

complete with blank escutcheon & mounting pan

(refer mounting kits)

complete with 21 modules of DIN space

JKE/IP

JK21E/IP

mounting kits

DIN rail kit 4.5 modules JK16A

flush surrounds

to suit JK18IP and JK24IP




JKFL1/IP

JKFL2/IP

JKFL3/IP

JKFL4/IP

fuse carriers




cable clamps to suit LT052 (6-70mm2)

cable clamp to suit LT150 (70-150mm2)

cable clamps to suit LT250 (120 - 240mm2)

LT052

LT150

LT250

LZ051

LZ151

LZ152

DIN blade fuses

available on request

chassis

18 way double-ended

24 way double-ended

30 way double-ended

36 way double-ended

42 way double-ended

48 way double-ended

60 way double-ended

72 way double-ended

JK18C

JK24C

JK30C

JK36C

JK42C

JK48C

JK60C

JK72C

18 way single-ended

24 way single-ended

36 way single-ended

48 way single-ended

JK18C1

JK24C1

JK36C1

JK48C1

chassis rating

250A

250A

rated short time

18kA 0.2sec

10kA 1.0sec

withstand current

36kA

17kA


Pan

elb

oard

s

JK24IP

�

�

�

Jyka SS series panelboardsDesigned & constructed for use in corrosive environments or improved aesthetics- enclosure body from 1.5mm

316 grade stainless steel, unpainted N4 finish

- internals from 1.6mm zinc-anneal

- type tested 250A chassis- neutral & earth bars- IP66 rated- hinged & painted internal

escutcheon (zinc anneal)

- schedule card & holder- stainless steel top & bottom

gland plates- turnbuckle style door locks- contact us for custom

requirements





description catref.

24 way stainless steel panelboard36 way stainless steel panelboard48 way stainless steel panelboard72 way stainless steel panelboard

JK24IP/S JK36IP/S JK48IP/S JK72IP/S

incoming devices


for 250A MCCB in the top centre position for 80/100A ‘SB’ switches in the top centre position for SB380 + SB390 in the lower position, includes cable & hardwarefor 80/100A MCB’s in the top centre includes busbar & hardware

JK17K JK11S JK12S JK15S



outgoing devices

connection kit - kit only, excluding switchgear

for 160A 3 pole MCCB in the lower position, includes cable & hardware JK15K

dimensions cat. ref. height width depthJK18IP 750 600 250JK24IP 750 600 250JK30IP 860 600 250JK36IP 860 600 250JK42IP 970 600 250JK48IP 970 600 250JK60IP 1200 600 250JK72IP 1200 600 250


E.8

This section includes moulded case circuit breakers and load break switches which are utilised to ensure the switching, protection and distribution of low voltage installations.

Energy distributionMain incomers

F.1

Mai

nin

com

ers

Moulded case circuit breakers F.2

Technical information for circuit breakers F.9

Prospective fault current F.10

Load break switches F.11

Load break switches - characteristics F.13

F.2

HH147

25,4

25,4

76

25,4

79041

7590

70

54

HY121

Moulded case circuit breakers

description currentrating (A)

poles1

poles3

frame: H125H- 25kA

MCCBMCCBMCCBMCCBMCCBMCCBMCCBMCCBMCCBMCCB

1620253240506380

100125

HH101 HH102 HH103 HH104 HH105 HH106 HH107 HH108 HH109 HH110

-- HH143- HH145- HH147 HH148 HH149 HH150

frame: H160H - 25kA

MCCB 160 - HH151

frame: H125N - 40kA

MCCBMCCBMCCBMCCBMCCBMCCB

25406380

100125

------

HN143 HN145 HN147 HN148 HN149 HN150

frame: H125E - 70kA

MCCBMCCBMCCBMCCBMCCBMCCB

25406380

100125

------

HE143 HE145 HE147 HE148 HE149 HE150

h125 and h160xsdescriptionHager MCCB’s offer contractors, switchboard builders and OEM’s, a wide choice of options.

The range is available in 1, and 3 poles with breaking capacities including 25kA, 40kA and 70kA.

frame Icu Un Ui

h125h 25kA 240/415V~ 500Vh160h 25kA 240/415V~ 500Vh125n 40kA 240/415V~ 500Vh125e 70kA 240/415V~ 500V

technical data- Connection capacity

h125: 95mm2 - rigidh125: 50mm2 - flexibleh160xs: 95mm2 - rigidh160xs: 75mm2 - flexible

approvals and tests- AS3947-2- IEC60947-2thermal setting 0.8 - 1 x In

magnetic setting fixed at 10-20xIn


shunt trip 24V - 60V~ HX101E



undervoltage release 48V - 60V~ HX111E



auxiliary switch 1 NO/NC, 230V/6A HX121


aux / alarm switch 1 NO/NC + 1NO/NC 230V/6A HX123

rotary handle c/w: 200mm shaft HX131A

locking kit HX139

interphase barrier HY119

terminal cover HY121

accessories and auxiliaries

Mai

nin

com

ers

F.3

HN204

931

104,8

871

35 35

35

96

110

87

001



poles3

frame :h250n - 40kAelectromechanical trip unit 160 HN254

electromechanical trip unit 200 HN203

electromechanical trip unit 250 HN204

electronic trip unit 250 HN205

frame :h250e - 70kAelectronic trip unit 250 HE205

description characteristics cat.ref









aux / alarm switch 1 NO/NC + 1NO/NC HX223E

230V/6A

rotary handle c/w: 200mm shaft HX231

rotary handle mounted on device HX230

locking kit HX239


terminal cover HY221

cable connection terminals 25 - 185mm2 HY201

busbar extensions HY212

h250descriptionHager MCCB’s offer contractors, switchboard builders and OEM’s, a wide choice of options.

The range, h250 isavailable in 3 pole with breaking capacities including 40kA and 70kA.

frame Icu Un Ui

h250n 40kA 400V~ 690Vh250e 70kA 400V~ 690V

technical dataapprovals and tests- AS3947-2- IEC60947-2- Connection capacity: 185mm2 - rigid: 185mm2 - flexible

- electromechanical trip unit thermal setting 0.8 - 1.0 x In magnetic setting 5 - 10 x In

- electronic trip unitthermal setting 0.4 - 1 x Inmagnetic setting 2 - 14 x Indelay setting 0 - 300ms


F.4

HN303E

5,412

139,2

2,752

43,7 43,7

43,7

100

136

001


description currentrating(A)

poles3

frame :h400n - 50kAelectromechanical trip unit 320 HN302E

electromechanical trip unit 400 HN303E

electronic trip unit 400 HN305E

frame :h400e - 70kAelectronic trip unit 400 HE305E




shunt trip 380V 600V~ HX105E






aux / alarm switch 1 NO/NC + 1NO/NC

230V/6A

HX223E

rotary handle mounted on device HX330E

rotary handle c/w: 200mm shaft HX331E

locking kit HX339E


terminal cover HY321E

cable connection terminals 35 - 240mm2 HY301E

cable connection twin terminals 35 - 240mm2 HY303E

bus bar extensions spreaders HY312E





h400xsdescriptionHager MCCB’s offer contractors, switchboard builders and OEM’s, a wide choice of options.

The range, h400xs isavailable in 3 pole with breaking capacities including 50kA and 70kA.

frame Icu Un Ui

h400n 50kA 400V~ 750Vh400e 70kA 400V~ 750V

Mai

nin

com

ers

F.5

HN353E

5,412

139,2

2752

43,7 43,7

43,7

100

136

001




frame Icu Un Ui

h630n 50kA 400V~ 750Vh630e 70kA 400V~ 750V


poles3

frame :h630n - 50kAelectromechanical trip unit 500 HN352E

electromechanical trip unit 630 HN353E

electronic trip unit 630 HN355E

frame :h630e - 70kAelectromechanical trip unit 630 HE355E




shunt trip 380V 600V~ HX105E






aux / alarm switch 1 NO/NC + 1NO/NC

230V/6A

HX223E

rotary handle mounted on device HX330E

rotary handle c/w: 200mm shaft HX331E

locking kit HX339E


terminal cover HY321E

cable connection terminals 35 - 240mm2 HY301E

cable connection twin terminals 35 - 240mm2 HY303E

bus bar extensions spreaders HY312E





F.6

HN806

70

372

242

209,6

4,604

70

70



The h800 is available in 3 pole with breaking capacities including 50KA.

frame Icu Un Ui

h800n 50kA 400V~ 750V




poles3

frame :h800n - 50kAelectronic trip unit 800 HN806


auxiliary switch 2 x N/O -2 x N/C

230V/6A~

HX821

alarm/auxiliary switch 1 x N/O-N/C - 1 x

NO-N/C 230V/6A~

HX822

shunt trip 110V - 440V~ HX804

undervoltage release 208V - 240V~ HX814


rotary handle

200mm shaft

handle c/w: HX831


interphase barriers HY819

terminal kit 2 X 185 - 240mm2 HY801

padlockable handle kit HY850


Mai

nin

com

ers

F.7

HN903

373

209,6

4,604

70

7070




frame Icu Un Ui

h1250n 50kA 400V~ 750Vh1250e 70kA 400V~ 750V




poles3


frame :h1250e - 70kAelectronic trip unit 1250 HE903


auxiliary switch 2 pole 2 x N/O-2 x N/C

230V/6A

HX921


NO-N/C 230V/6A

HX922






rotary handle c/w 200mm shaft HX931


busbar extension HY910


F.8

HN904

373

209,6

4,604

70

7070



The range, h1600xs isavailable in 3 pole with breaking capacities including 50kA.

frame Icu Un Ui

h1600n 50kA 400V~ 750V

technical dataapprovals and tests- AS3947-2- IEC60947-2- Connection capacitysupplied with rear connection bars



poles3



auxiliary switch 2 pole 2 x N/O-2 x N/C

230V/6A

HX921


NO-N/C

230V/6A

HX922






rotary handle c/w 200mm shaft HX931


busbar extension HY910


F.9Subject to technical changes

Mai

nin

com

ers

Technical information for circuit breakers

fault loop impedanceWith the introduction of AS/NZS 3000:2007 there are new wiring rules for electrical contractors and electrical consultants to consider when designing an electrical installation.

This guide is only concerned with one new area, fault loop impedance, and it’s affect on the choice of conductor and circuit breaker for a given circuit. Voltage drop and overcurrent requirements should also be given consideration.

An earth fault situation is caused when an active conductor comes into contact with an earthed conductor - fault current then flows. short-circuit is formed and fault current flows. Contractors and consultants must make sure that the conductors in a circuit will allow sufficient energy to flow to cause the circuit breaker to trip in the required time (disconnection time for 230V supply is 0.4s for socket–outlets up to 63A, or handheld Class 1 equipment intended for manual movement during use. 5 seconds for other circuits including submains and final sub circuits supplying fixed or stationary equipment (clause 1.5.5.3)

To make sure that this fault current is large enough to trip a circuit breaker in the required time the fault loop impedance (Zs) must be below a certain value If Zs is too large then the circuit breaker may take too long to trip(> 0.4s) or may not trip at all.

Circuit length – Circuit impedance increases with the length of a circuit. Cross -sectional area of cable – The smaller the cross -sectional area of a cable, the higher it’s impedance per meter will be.Thermal and magnetic settings of a circuit breaker – hager circuit breakers have both rated current and magnetic characteristics.

The higher the rated current and magnetic settings, the more energy is required to trip the circuit breaker in the required time (< 0.4 s ). So a circuit breaker with a magnetic setting of 14 x In will require more energy to trip it (in the required time) than a circuit breaker with a magnetic setting of 7.5 x In.

If more energy is required to flow, then a larger cross-sectional area cable may be needed. If this is not possible then installing a hager RCD will provide a simple and economical solution.

So circuit length, cross sectional area of the cable and circuit breaker settings all need to be taken into account to ensure correct function of a circuit.

The tables below are a guide to the maximum circuit length and maximum circuit impedance for a given hager circuit breaker. Using these tables will help ensure that the disconnection time for a 230V a.c. supply is met according to AS/NZS 3000:2000.

TABLE 2 Maximum circuit length (MCL) and maximum circuit impedance (Zs) for hager MCBs (NSxxx range, NTxxxC range, NCNxxxA range, NMxxxT, NDNxxxA range).

Where: MCL = Maximum circuit lengthZs = Maximum circuit impedanceAbove table based on supply of voltage of 230V / 400V ( AS/NZS 3000: 2000 Amdt1)

conductor sizeProtective

devicerating

a

hager MCB range

Active Earth C- Curve MCBs D Curve MCBs Max Zs ( )for all

ranges -5 secsMCL (m)

Max Zs ( )0.4 secs MCL (m)

Max Zs ( )0.4 secsmm2 mm2

1 1 1 545 30.67 - - 57.50

1 1 2 273 15.33 - - 28.75

1 1 3 182 10.22 - - 19.17

1 1 4 136 7.67 - - 14.38

1 1 6 91 5.11 55 3.07 9.58

1 1 10 55 3.07 33 1.84 5.75

1.5 1.5 10 82 3.07 49 1.84 5.75

1.5 1.5 16 51 1.92 31 1.15 3.59

2.5 2.5 16 85 1.92 51 1.15 3.59

2.5 2.5 20 68 1.53 41 0.92 2.88

4 2.5 25 67 1.23 40 0.74 2.30

4 2.5 32 52 0.96 31 0.58 1.80

6 2.5 32 60 0.96 36 0.58 1.80

6 2.5 40 48 0.77 29 0.46 1.44

10 4 40 78 0.77 47 0.46 1.44

10 4 50 62 0.61 37 0.37 1.15

16 6 63 76 0.49 45 0.29 0.91

16 6 80 59 0.38 36 0.23 0.72

25 6 80 66 0.38 40 0.23 0.72

25 6 100 53 0.31 32 0.18 0.58

35 10 100 85 0.31 51 0.18 0.58

35 10 125 68 0.25 41 0.15 0.46

50 16 125 106 0.25 63 0.15 0.46

F.10 Subject to technical changes

FIGURE : 10

FIGURE : 11

Prospective fault current

Calculation of Prospective Short Circuit CurrentSeveral excellent proprietary computer programs are now available for calculating the prospective fault level at any point in the installation. They are also able to select the correct size and type of cable and match this with the correct circuit protective device.

Estimation of Prospective Fault CurrentActually calculating prospective short-circuit current is not in itself difficult but it does require basic data which is not always available to the electrical installation designer.It is therefore usual to use a simple chart as shown in Fig 10 to estimate the prospective short circuit current. This type of chart always gives a prospective fault level greater than that which would have been arrived at by calculation using accurate basic data. Therefore it is safe to use but sometimes may result in an over engineered system.

Example1 Project 40m of cable length across on to the 240mm2 cable

curve. From this point project down onto the 28kA curve. From this point projecting across we note that the prospective fault level at the panelboard is 24kA.

2 Project 60m of cable length across onto the 70mm2 cable curve. From this point project down on to the 24kA curve. From this point projecting across we see that the prospective fault level at the MCB distribution board is 10kA.

FIGURE : 12

The relationship between probable short-circuit current and service short-circuit breaking capacity is explained. The probable short circuit is the type of short circuit which is most likely to occur; this is nearly always at the extremity of the protected cable and more often than not a single phase or earth fault. Fig 11 shows a typical 3 phase 4 wire 400V system fed by a 1000 kVA transformer. The transformer is adjacent to the main switchboard so the prospective short-circuit current (PSCC*) on the main switchboard busbars is estimated as 30kA. The probable short-circuit current on the panelboard feeder circuit is estimated as 24kA, if it were a 3 phase symmetrical fault, or 12kA for a phase to neutral fault, which in fact would be the most likely type of fault. (Note: when estimating a phase to neutral prospective short-circuit current, the length of conductor is doubled.)

Therefore for this application the main switchboard incoming circuit breaker (A) should have an Ics 30kA and an Icu 30kA.

The panelboard feeder circuit breaker (B) should have an Icu 30kA and an Ics 24kA.

*Prospective Short Circuit Current (PSCC).

Mai

nin

com

ers

F.11

HA302

HA307

HA354

Load break switches

descriptionthe HA series are a multi-pole load disconnector switch with manual operation. They enable making and breaking on load and safety isolation of any low voltage installation.

technical data- visualised breaking- double breaking per

phase- DIN rail mounting- 3 or 4 pole- padlockable handle- auxiliary contacts

- rotary handlescomplete withextension shaft

- complying withIEC60947-3

description width in I17.5 mm

characteristics modulemm

cat.

ref

3 pole isolator690V~

2 In 40A 36 HA302

3 In 63A 54 HA303


6 In 80A 108 HA304

6 In 100A 108 HA305

6 In 125A 108 HA306

8.5 In 160A 142 HA307

8.5 In 200A 142 HA308

8.5 In 250A 142 HA309M


- In 250A - HA354

- In 400A - HA356

- In 630A - HA358

- In 800A - HA360

- In 1250A - HA362

- In 1600A - HA364


6 In 125A 108 HA406

8.5 In 200A 142 HA408

F.12

HA457

HZC106

HZC003

HZC002

Load break switches

descriptionthe HA series are a multi-pole load disconnector switch with manual operation. They enable making and breaking on load and safety isolation of any low voltage installation.

technical data- visualised breaking- double breaking per

phase- DIN rail mounting- 3 or 4 pole- padlockable handle- auxiliary contacts

- rotary handles complete with extension

shaft- complying with

IEC60947-3

description width in I17.5 mm

characteristicsbox qty

cat.ref.


- In 400A - AC23 HA457

- In 630A - AC23 HA458

accessoriesrotary handles

black IP65 to suit HA360/HA362/HA364 HZC003

black IP55 to suit HA354/HA356/HA358 HZC002

black IP55 to suit HA304/HA305/HA306/HA307/HA308 HZC001

extension shafts320mm to suit HA360/HA362/HA364 HZC106

320mm to suit HA354/HA356/HA358 HZC102

200mm to suit HA304/HA305/HA306/HA307/HA308 HZC103

auxiliary contacts

In 5A - 250V~suitable for HA302/HA303

HZ021

In 5A -250V~suitable for HA304/HA305/HA306/HA307/HA308

HZ022

In 16A - 250V~suitable for HA354/HA356/HA358/HA360/HA362/HA364

HZ023

terminal shrouds

1 to suit HA354/switch-line or load side

HZC203

1 to suit HA356/HA358/switch-line or load side

HZC205

1 to suit HA307/HA308switch-line or load side(cable lug connection)

HZ062

1 to suit HA307/HA308/switch c/- cable clamp/line or load side

HZ072

F.13Subject to technical changes

Mai

nin

com

ers

Load break switches - characteristics (according to IEC 60947-3)

cat

ref

HA

302

HA

303

HA

304

HA

305

HA

306

HA

307

HA

308

HA

309M

HA

354

HA

356

HA

358

HA

360

HA

362

HA

364

therm

al curr

ent

Ith

40

63

80

100

125

160

200

250

250

400

630

800

1250

1600

insu

lati

on v

olt

age U

i (V

)80

080

080

080

080

080

080

080

080

010

0010

0010

0010

0010

00

impuls

e w

ithst

and v

olt

age U

imp (kV

)8

88

88

88

88

1212

1212

12

rate

d o

pera

tion c

urr

ent

(A)

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

A/B

400V

AC

(1)

A

C-2

1A /

AC

-21B

40/4

063

/63

80/8

010

0/10

012

5/12

516

0/16

020

0/20

020

0/25

025

0/25

040

0/40

063

0/63

080

0/80

012

50/1

250

1600

/160

0

A

C-2

2A /

AC

-22B

40/4

063

/63

80/8

010

0/10

012

5/12

516

0/16

020

0/20

020

0/20

025

0/25

040

0/40

063

0/63

080

0/80

012

50/1

250

1600

/160

0

A

C-2

3A /

AC

-23B

32/3

263

/63

80/8

010

0/10

012

5/12

516

0/16

020

0/20

020

0/20

025

0/25

040

0/40

050

0/63

080

0/80

012

50/1

250

1250

/125

0

690V

AC

(2)

AC

-20A

/ A

C-2

0B40

/40

63/6

380

/80

100/

100

125/

125

160/

160

200/

200

200/

250

250/

250

400/

400

630/

630

800/

800

1250

/125

016

00/1

600

A

C-2

2A /

AC

-22B

40/4

063

/63

40/4

040

/40

40/4

016

0/16

016

0/16

016

0/16

020

0/25

040

0/40

050

0/50

080

0/80

010

00/1

000

1000

/100

0

A

C-2

3A /

AC

-23

20/2

050

/50

25/2

525

/25

25/2

563

/80

63/8

063

/80

125/

160

250/

315

315/

315

800/

800

1000

/100

010

00/1

000

220V

DC

DC

-20A

/ D

C-2

0B40

/40

63/6

380

/80

100/

100

125/

125

160/

160

200/

200

200/

250

250/

250

400/

400

630/

630

800/

800

1250

/125

016

00/1

600

opera

tional pow

er

(kW

)

400

VA

C11

1840

5163

8010

010

013

2/13

222

0/22

028

0/28

045

0/45

071

0/71

071

0/71

0

690

VA

C11

1833

3333

150

150

150

90/1

1015

0/18

515

0/18

518

5/22

047

5/47

547

5/47

5

shor

t ti

me

wit

hst

and c

urr

ent

1 s

ec (k

A

rms)

1.25

1.5

2.5

2.5

2.5

44

49

1313

2650

50

short

cir

cuit

makin

g c

apacit

y (k

A p

eak)

610

1212

1216

1616

3045

4555

110

110

connecti

on

max

cab

le s

ectio

n (m

m)

1650

5050

5095

9595

150

240

2X30

02X

300

4X18

56X

185

max

bus

bar

wid

th (m

m)

--

--

-20

2020

3240

5063

100

100

(1)

A/B

= c

ateg

ory

with

ind

ex -

A =

freq

uent

op

erat

ion

/ B

= in

freq

uent

op

erat

ion

(2)

with

ter

min

al s

hrou

ds

or p

hase

bar

riers

Applic

ati

on c

ondit

ion &

uti

lisati

on c

ate

gory

, a

ccord

ing t

o IE

C 6

0947-3

Uti

lisati

on c

ate

gory

Use

Applic

ati

on

AC

DC

AC

20D

C20

off-

load

mak

ing

& b

reak

ing

dis

conn

ecto

r

AC

21D

C21

resi

stiv

e lo

ads

incl

udin

g m

oder

ate

over

load

ssw

itche

s at

inst

alla

tion

head

or

for

resi

stiv

e ci

rcui

ts

(ligh

ting)

AC

22D

C22

ind

uctiv

e &

res

istiv

e m

ixed

load

s in

clud

ing

mod

erat

e ov

erlo

ads

switc

hes

in s

econ

dar

y ci

rcui

ts o

r re

activ

e ci

rcui

ts

(cap

acito

r b

anks

)

AC

23D

C23

load

s m

ade

of m

otor

s or

oth

er h

ight

ly in

duc

tive

load

s

switc

hes

feed

ing

one

or s

erve

ral m

otor

or

ind

uctiv

e ci

rcui

ts (s

erie

s m

otor

s, m

agne

tic b

rake

s)

F.14F.14<#>www.hagerbr.com.au

Hager offers a wide range of Protection Devices, such as miniature circuit breakers, auxiliaries and accessories, RCCB‘s, RCBO’s, fuse carriers, DIN HRC fuse carriers, DIN socket outlets, earth leakage add-on blocks, earth leakage relays and torroids, surge protection devices and emergency test lighting packages, providing practical solutions for protecting people, installations and equipment.

Energy distributionProtection

Pro

tect

ion

G.1

MCB’s G.2

MCB’s - 80 - 125A G.6

MCB’s - accessories G.10

Fuse carriers G.11

DIN HRC fuse carriers G.12

DIN socket outlets G.12

Earth leakage add-on blocks G.13

RCCB’s G.14

RCBO’s G.15

Safety switches - accessories G.17

Earth leakage relays and torroids G.18

SPD selection for residential, rural and commercial areas G.19

Surge protective devices G.20

Emergency lighting discharge test packages G.21

G.2

NS120

45

68

44

MCB’s - 4.5kA C - Curve

descriptionprotection and control of circuits against overloads and short-circuits:- In domestic

installations

technical data- complies with

AS/NZS60898- tripping characteristics:

magnetic level is set at5 - 10 x In(C - curve)

- breaking capacity :4500A

- voltage rating :230/400V

- current rating : 6 to 40 A

- mechanical life : 20,000operations

connection capacity - rigid conductor 25mm2

flexible conductor 16mm2

- bi-connect allowing two connection points

accessories- LZ060, MZN175


width in I17.5mm

packpty

catref.

single pole 6 1 12 NS106

10 1 12 NS110

13 1 12 NS113

16 1 12 NS116

20 1 12 NS120

25 1 12 NS125

32 1 12 NS132

40 1 12 NS140

double pole 10 2 6 NS210

16 2 6 NS216

20 2 6 NS220

25 2 6 NS225

32 2 6 NS232

40 2 6 NS240

G.3

Pro

tect

ion

45

68

44

NT110C

NT216C

NT304C

MCB’s - 6kA C - Curve

descriptionprotection and control of circuits against overloads and short-circuits:- In commercial installations

Technical data- complies with

AS/NZS 60898- tripping characteristics:

magnetic level is set at5 - 10 x In(C - curve)

- breaking capacity : 6000 A- voltage rating : 230/400Vac- current rating : 2 to 63 A- mechanical life : 20,000

operations- bi-connect allowing two

connection points

connection capacity - 25mm2 rigid - 16mm2 flexible

accessories- LZ060, MZN175,

MZ201,MZ202,MZ203, MZ206


width in I17.5mm

packqty

catref.

single pole 2 1 12 NT102C

4 1 12 NT104C

6 1 12 NT106C

10 1 12 NT110C

16 1 12 NT116C

20 1 12 NT120C

25 1 12 NT125C

32 1 12 NT132C

40 1 12 NT140C

50 1 12 NT150C

63 1 12 NT163C

double pole 6 2 6 NT206C

10 2 6 NT210C

16 2 6 NT216C

20 2 6 NT220C

25 2 6 NT225C

32 2 6 NT232C

40 2 6 NT240C

50 2 6 NT250C

63 2 6 NT263C

triple pole 2 3 4 NT302C

4 3 4 NT304C

6 3 4 NT306C

10 3 4 NT310C

16 3 4 NT316C

20 3 4 NT320C

25 3 4 NT325C

32 3 4 NT332C

40 3 4 NT340C

50 3 4 NT350C

63 3 4 NT363C

G.4

NDN220A

45

68

44

MCB’s - 10kA D - Curve

descriptionprotection and control of circuits against overloads and short-circuits:- In commercial and light

industrial installations



magnetic level is set at10 - 20 x In

- breaking capacity :10,000A

- voltage rating :230/400V

- current rating : 6 to 63 A- mechanical life : 20,000

operations

connection capacity - 25mm2 rigid - 16mm2 flexible accessories- LZ060, MZN175,

MZ201,MZ202,MZ203, MZ206,MZN120, MZN121


width in I17.5mm

packqty

catref.

single Pole 6 1 12 NDN106A

10 1 12 NDN110A

16 1 12 NDN116A

20 1 12 NDN120A

25 1 12 NDN125A

32 1 12 NDN132A

40 1 12 NDN140A

50 1 12 NDN150A

63 1 12 NDN163A

double pole 6 2 6 NDN206A

10 2 6 NDN210A

16 2 6 NDN216A

20 2 6 NDN220A

25 2 6 NDN225A

32 2 6 NDN232A

40 2 6 NDN240A

50 2 6 NDN250A

63 2 6 NDN263A

triple pole 6 3 4 NDN306A

10 3 4 NDN310A

16 3 4 NDN316A

20 3 4 NDN320A

25 3 4 NDN325A

32 3 4 NDN332A

40 3 4 NDN340A

50 3 4 NDN350A

63 3 4 NDN363A

four pole 6 4 3 NDN406A

10 4 3 NDN410A

16 4 3 NDN416A

20 4 3 NDN420A

25 4 3 NDN425A

32 4 3 NDN432A

40 4 3 NDN440A

50 4 3 NDN450A

63 4 3 NDN463A

G.5

Pro

tect

ion

NCN110A

NCN220A

NCN332A

45

68

44

MCB’s - 10kA C - Curve

descriptionprotection and control ofcircuits against overloads and short-circuits:- In commercial and light industrial installations



magnetic level is set at5 - 10 x In

- breaking capacity :10,000A

- voltage rating :230/400Vac

- current rating : 1 to 63 A

- mechanical life : 20,000operations

connection capacity - 25mm2 rigid - 16mm2 flexible accessories- LZ060, MZN175, MZ201,

MZ202,MZ203, MZ206, MZN120, MZN121


width in I17.5mm

packqty

catref.

single pole 1 1 12 NCN101A

2 1 12 NCN102A

3 1 12 NCN103A

4 1 12 NCN104A

6 1 12 NCN106A

10 1 12 NCN110A

16 1 12 NCN116A

20 1 12 NCN120A

25 1 12 NCN125A

32 1 12 NCN132A

40 1 12 NCN140A

50 1 12 NCN150A

63 1 12 NCN163A

double pole 1 2 6 NCN201A

2 2 6 NCN202A

3 2 6 NCN203A

4 2 6 NCN204A

6 2 6 NCN206A

10 2 6 NCN210A

16 2 6 NCN216A

20 2 6 NCN220A

25 2 6 NCN225A

32 2 6 NCN232A

40 2 6 NCN240A

50 2 6 NCN250A

63 2 6 NCN263A

triple pole 1 3 4 NCN301A

2 3 4 NCN302A

3 3 4 NCN303A

4 3 4 NCN304A

6 3 4 NCN306A

10 3 4 NCN310A

16 3 4 NCN316A

20 3 4 NCN320A

25 3 4 NCN325A

32 3 4 NCN332A

40 3 4 NCN340A

50 3 4 NCN350A

63 3 4 NCN363A

G.6 Subject to technical changes

Miniature circuit breakers 80 - 125A

Thermal magneticcircuit breakers

Curves - ‘C’ - ‘D’In 80 to 125A

These circuit breakers are intended for the protection of circuits against overloads and short circuits in residential, commercial and industrial

premises.The circuit breakers, curve ‘C’, are adapted to the protection of the circuits in residential and Commercial premises.

The circuit breakers, curve ‘D’, are particularly adapted to the protection of the circuits where the

installations are subject to high in-rush currents.HMC curve ‘C’ 1500015kA of 80 - 100 - 125A :width 1.5 / pole

HMD curve ‘D’ 1500015kA of 80 - 100 - 125 A :width 1.5 / pole

HMF curve ‘C’ 1000010kA of 80 - 100 - 125 A :width 1.5 / pole

Series HMC, HMD, HMF at a glance;

Reinforcement of terminal harness:The reduction in distortion ensures maximum torque can be applied directly to conductor. 3.5Nm

Front product labelling.MCB’s are equipped with a pull down window that allows identification of protective device.

The ‘OFF’ position is clearly shown by a green indicator on the handle.

Trip free mechanism:MCB’s have quick and simultaneous closing of contacts, regardless of operating cycle, hence, the working life is increased.

Options ;Auxiliaries; standard 63A MCB auxiliaries (shunt, trip etc...) can be facilitated.

Accessories, Interphase barriers and terminal cover.

Tightening compensation system;The unique design of the terminal compensates and corrects any cable distortion.

Fast on connection;The MCB’s are equipped with top & bottom ‘fast-on’ terminals. They are used to supply low powered auxiliaries such as meters, indicating lights etc...

Lockable handle ;MCB’s can be locked in the <OFF> position by the integrated locking facility within the handle. The lock allows either sealing wire or a cable tie that may have a warning card attached ensuring safe working environment.

Model Icc/Curve Accessories Fast-on

connection

Tightening

comp. system

Lockable

handle

Front product

labelling

HMF 10kA, C YES YES YES YES YES

HMD, HMC 15kA, C, D YES YES YES YES YES

G.7

Pro

tect

ion

HMF199T

HMF299T

HMF399T

MCB’s - 80 - 125AHMF : ‘C’ 10000 - 10kA

Curve ‘C’ 10000(IEC 60898-1)10kAIEC 60947-2In 80 to 125A

Tripping curves :‘C’ magnetic settingbetween 5 and 10In.

Use :residential, commercialand industrial premises

Connection capacity :- 35mm flexible wire- 70mm rigid wire

KEMAIn conformity with the IEC 60898-1, 947-2 approved

description In / A width in I17.5mm

catref.

Circuit breakers 1 pole 80 1.5 HMF180T

100 1.5 HMF190T

125 1.5 HMF199T

Circuit breaker 2 pole 80 3 HMF280T

100 3 HMF290T

125 3 HMF299T

Circuit breakers 3 poles 80 4.5 HMF380T

100 4.5 HMF390T

125 4.5 HMF399T

G.8

HMC199T

HMC299T

HMC399T

N

HMC499T

MCB’s - 80 - 125AHMC : ‘C’ 15000 - 15kA

Curve ‘C’ 15000(IEC 60898-1)15kAIEC 60947-2In 80 to 125A

Tripping curves :‘C’ magnetic settingbetween 5 and 10In.

Use :residential, commercialand industrial premises

Connection capacity :- 35mm flexible wire- 70mm rigid wire

KEMAIn conformity with the IEC 60898-1947-2. Certification approved to AS/NZS 60898


catref.

Circuit breakers 1 pole 80 1.5 HMC180T

100 1.5 HMC190T

125 1.5 HMC199T

Circuit breaker 2 pole 80 3 HMC280T

100 3 HMC290T

125 3 HMC299T

Circuit breakers 3 poles 80 4.5 HMC380T

100 4.5 HMC390T

125 4.5 HMC399T

Circuit breakers 4 poles 80 6 HMC480T

100 6 HMC490T

125 6 HMC499T

G.9

Pro

tect

ion

N

HMD199T

HMD399T

HMD499T

MZN130

MZN131

MCB’s - 80 - 125AHMD : ‘D’ 15000 - 15kA

Curve ‘D’ 15000(IEC 60898-1)15kAIEC 60947-2In 80 to 125A

Tripping curves :‘D’ magnetic settingbetween 10 and 20In.

Use : commercial and industrial premises

Connection capacity : - 35mm flexible wire- 70mm rigid wire

KEMAIn conformity with the IEC 60898-1947-2.Certification approved to AS/NZS 60898


catref.

Circuit breakers 1 pole 80 1.5 HMD180T

100 1.5 HMD190T

125 1.5 HMD199T

Circuit breaker 2 pole 80 3 HMD280T

100 3 HMD290T

125 3 HMD299T

Circuit breakers 3 poles 80 4.5 HMD380T

100 4.5 HMD390T

125 4.5 HMD399T

Circuit breakers 4 poles 80 4.5 HMD480T

100 4.5 HMD490T

125 4.5 HMD499T


Terminal covers terminal cover,

sealable

MZN130

Phase barrier 1 set of 3 phase

barriers

MZN131

Accessories for circuit breakers HMF, HMC HMD

G.10

MZ202

MZ203

MZN175

13 21

14 22

91

92

93

94

C1

C2

A1

U<

MCB’s - Accessories

descriptionall auxiliaries are common to both single and multi-pole circuit breakers and safety switches (RCCBs and RCBOs). These auxiliaries are fitted to the left hand side of devices.

(Auxiliary contact, shunt trip and undervoltage relays are not suitable for use with 4.5kA MCBs)


catref.

auxiliary contact5A - 230V~

NO + 1NC allows remote indication of main contact status

0.5 MZ201

auxiliarycontact with reset

auxiliary contact asabove.Reset switch triggerson overload or short circuit

0.5 MZ202

shunt trip relay allows for remote tripping of MCB. The coil is protected by a contact whichcuts the supply after MCB trips

1 MZ203

undervoltage if supply falls to 35 to 70% of nominalvoltage the MCBwill trip

1 MZ206

MZ203 MZ201 MZ201 MCB or or MZ206 MZ202

locking device to lock the MCB handle in on/off position

2 MZN175

heat dissipationinserts

avoids overheatingfor DIN rail moduleswhen several devicesmounted side by side are carrying high continuous loads

0.5 LZ060

terminal cover & screw shield

MZN120

phase barriers (1 set of 3)

MZN121

G.11

Pro

tect

ion

LS201

Fuse carriers

descriptionprotection and control of circuits against overloads and short circuits:- suitable for fuses which comply with BS88: Part I:1998

technical data - rated voltage: 415V ac 250V dc- fusing factor : class Q1- rated breaking capacity;80kA at 415 Vac40kA at 250 Vdc

- fuse cartridge not supplied

connection capacity- 16mm2 rigid cable- 16mm2 flexible + busbar


width in I17.5mm

cat.

ref

fuse carriers for BS88 fuses.

(supplied without fuse

cartridge)

32A max 1 LS201

Locking kit MZN178

BS88 cartridge fuse

29 x 12.7mm

6A L17300

8A L17400

10A L17500

16A L17600

20A L17700

25A L17800

32A L17900

handle link pin 2 L022

handle link pin 3 L023

spare fuse holder

(DIN mounted)

1 L14700

service fuse back-wired 100A

for 22mm

LH901

service fuse back-wired 100A

anti-intrusion

LH904

fuse carrier (wedge) to suit

LH901

LH901/W

100A neutral link, 4 way KM06A

G.12

LT150

SNO15DA

DIN HRC Fuse carriers

DIN Socket Outlets

descriptionsize according to DIN from 00 to 2 to suit fuses according to AS/NZS60269

technical dataDIN fuses typically have breaking capacity to 100kA at 500V (supplied without fuse cartridge)- connection capacity

70 - 240mm


cat.

ref

DIN mounted socket outlets

DIN mounted 10A double pole auto switched completewith safety shutters and ‘on’indicator

2.5 SNO10DA

DIN mounted 15A doublewith safety shutters and ‘on’indicator

2.5 SNO15DA

description characteristics cat.

ref

fuse switchdisconnectors

3 x size 00 160A DIN blade fuses

LT052

3 x size 1 250A LT150

DIN blade fuses 3 x size 2 400ADIN blade fuses

LT250

cable clamps suitable for LT052(6 - 70mm2)

LZ051

suitable for LT150(70 - 150mm2)

LZ151

suitable for LT250 (120 - 240mm2)

LZ152

G.13

Pro

tect

ion

BD325T

Earth leakage add-on blocks

descriptionfor use with NCN + NDN + NT MCB’s- these devices are

designed to be fitted tothe right hand side of 2, 3 or 4 pole MCBs

- the combination devicethen providesprotection againstoverload, short circuits

and earth leakage faults. Satisfiesmechanical protectionclauses of AS3000:2007

- all devices have a testfacility

- all devices are type A- nuisance tripping

protection- protected against

transient voltages


AS/NZS61009.1

connection capacityflexible: 25A = 6mm2

40A = 16mm2

63A = 16mm2

rigid: 25A = 10mm2

40A = 25mm2

63A = 25mm2

description residualcurrentIIr n

currentrating (A)

width in I17.5mm

cat.

ref

2 pole RCCBadd-on blocks

30mA 25A 2 BD225T

30mA 40A 2 BD240T

30mA 63A 2 BD263T

100mA 25A 2 BE225T

100mA 63A 2 BE263T

300mA 25A 2 BF225T

300mA 40A 2 BF240T

300mA 63A 2 BF263T

3 pole RCCBadd on blocks

30mA 25A 2 BD325T

30mA 40A 3 BD340T

30mA 63A 3 BD363T

100mA 63A 3 BE363T

300mA 63A 3 BF363T

4 pole RCCBadd-on blocks

30mA 25A 2 BD425T

30mA 40A 3 BD440T

30mA 63A 3 BD463T

100mA 25A 2 BE425T

100mA 63A 3 BE463T

300mA 25A 2 BF425T

300mA 40A 3 BF440T

300mA 63A 3 BF463T

G.14

CD240T

CD440T

Safety switches - RCCB’s

descriptionthe safety switch is designed to open a circuit automatically in the case of a fault between phase and earth and or neutral and earth, greater than or equal to rated tripping current.use in domestic, commercial or industrial installationstechnical data- Approved to -

AS/NZS61008.1

- 10mA, 2 modules, 16A- 30mA, 2 and 4 modules, 25A, 40A, 63A, 80A, 100A- 100mA, 2 modules, 25A

40A,63A, 80A, 100A,4 modules -80A, 100A

- voltage rating, 230/400V~

connection capacity- 25mm2 - Rigid

(50mm2 for 80A,100A)- 16mm2 - Flexible

(35mm2 for 80A, 100A)

- positive contact indication windows- earth fault indication

window- trip free mechanisms

accessories- auxiliary & alarm

contacts- toggle locking device- neutral links- 400V shunt trip- 230V undervoltage

release

description residualcurrentIr n

currentrating (A)

width in I17.5mm

cat.

ref

double poletype AC

30mA 25A 2 CD225T

30mA 40A 2 CD240T

30mA 63A 2 CD263T

30mA 80A 2 CD280T

30mA 100A 2 CD284T

100mA 25A 2 CE225T

100mA 40A 2 CE240T

100mA 63A 2 CE263T

100mA 80A 2 CE280T

100mA 100A 2 CE284T

four poletype AC

30mA 25A 4 CD425T

30mA 40A 4 CD440T

30mA 63A 4 CD463T

30mA 80A 4 CD480T

30mA 100A 4 CD484T

100mA 80A 4 CE480T

100mA 100A 4 CE484T

double poletype AAC and pulsating DCresidual currents

10mA 16A 2 CC216T

30mA 25A 2 CD227T

30mA 40A 2 CD242T

30mA 63A 2 CD265T

100mA 80A 2 CE281T

100mA 100A 2 CE285T

four poletype Apulsating DCand AC residualcurrents

30mA 25A 4 CD427T

30mA 40A 4 CD442T

30mA 63A 4 CD465T

30mA 80A 4 CD481T

30mA 100A 4 CD485T

100mA 80A 4 CE481T

100mA 100A 4 CE485T

G.15

Pro

tect

ion

AD820T

AD917T

AD120T

Ph N

Ph N

Ph N

Ph N

Ph N

45

68

44

RCBO’s - 2 modules

descriptionCompact combination devices which provide MCB overcurrent protection & earth leakage protection. All units are two pole with line neutral switched & are 2 modules wide.The units are available with various current rating ranging from 6A-40A. The range includes Type A & Type AC devices.Type AC devices are the standard unit & will detect an

a.c. sinusoidal residual current. Type A device is designed with intrinsic features that can detect a.c. as well as pulsating d.c. residual currents.Solid state devices that are connected to permanent wiring have an increased possibility of generating residual current containing a d.c. component. Type A devices are able to tolerate this d.c. component. Standard type AC devices may become saturated by the d.c. component & may not detect a

residual current.features- earth fault indication

window- trip free mechanismsconnection capacity- 16mm2 flexible- 25mm2 rigidaccessories- auxiliary & alarm contact - toggle locking device- shunt trip- undervoltage release

description residualcurrentIrn

currentrating (A)

width in I17.5mm

cat.

ref

2 module RCBO4.5 kA Type AC

30mA 6A 2 AD806T

30mA 10A 2 AD810T

30mA 13A 2 AD813T

30mA 16A 2 AD816T

30mA 20A 2 AD820T

30mA 25A 2 AD825T

30mA 32A 2 AD832T

2 module RCBO4.5kA Type A

30mA 10A 2 AD811T

30mA 16A 2 AD817T

30mA 20A 2 AD821T

30mA 32A 2 AD833T

2 module RCBO6kA Type AC

30mA 6A 2 AD906T

30mA 10A 2 AD910T

30mA 13A 2 AD913T

30mA 16A 2 AD916T

30mA 20A 2 AD920T

30mA 25A 2 AD925T

30mA 32A 2 AD932T

30mA 40A 2 AD940T

2 module RCBO6kA Type A

10mA 10A 2 AC911T

10mA 16A 2 AC917T


30mA 6A 2 AD907T

30mA 10A 2 AD911T

30mA 13A 2 AD914T

30mA 16A 2 AD917T

30mA 20A 2 AD921T

30mA 25A 2 AD926T

30mA 32A 2 AD933T

30mA 40A 2 AD941T

G.16G.16

N N L FEout out

load

N N L FEout out

load

N N L FEout out

load

ADA120T

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

RCBO’s - 1 module description residual

currentIrn

currentrating (A)

width in I17.5mm

cat.

ref

1 module RCBO6kA Type AC

30mA 10A 1 AD110T

30mA 16A 1 AD116T

30mA 20A 1 AD120T

30mA 25A 1 AD125T

30mA 32A 1 AD132T


30mA 10A 1 ADA110T

30mA 16A 1 ADA116T

30mA 20A 1 ADA120T

30mA 25A 1 ADA125T

30mA 32A 1 ADA132T


10mA 10A 1 ACA110T

10mA 16A 1 ACA116T

10mA 20A 1 ACA120T

10mA 25A 1 ACA125T

Technical information for RCCB’s & RCBO’s

Discrimination between ResidualCurrent Devices

In theory it is possible to achieve current discrimination between residual current devices, but the limit of discrimination is far too low for practical purposes. Time delay is the only reliable and by far the best method used to obtain discrimination. It can only be achieved by delaying the tripping of the upstream residual current devices.

The down stream device would typically be a 30mA or occasionally a 10mA residual current device. Typically they will operate within 40ms and occasionally much faster.

Hager residual current relays (HR210, HR212) have adjustable time delay and residual current settings. They can be used as an upstream device to achieve residual current protection of the entire installation. It is advisable to set the residual current relay at a residual higher tripping current than a downstream devices (> 30mA) since the upstream device will see the accumulation of leakage currents from the entire installation. The residual current setting will depend on the quantity and type of equipment connected to the installation (Immersion water heaters, switch mode power supplies are particularly prone to leak currents to earth). The time delay should be set above zero to 300ms.

If further levels of protection are required upstream from the hager residual current relay, then another residual current relay can be installed upstream and the settings of the upstream device ( time and residual current) adjusted higher again.

G.17

Pro

tect

ion

CZ001

MZ 203... + CZ001 Safety Switch MZ206 (CA + SD)

Safety switches - accessories

function description width in I17.5mm

cat.

ref

combination auxiliary & alarm switch2xNO + 2xNC6A-230V~3A-440V~

CA allows remote indication of main contact status SD indicates a fault condition (eg Safety Switch tripped)

1 CZ001

If shunt trip or undervoltagerelease is required, theCZ001 must be used as acoupler.

auxiliary switch 1xNO + 1xNC6A-230V~3A-440V~

allows remote indication of main contact status

0.5 MZ201

alarm switch 1xNO + 1xNC6A-230V~3A-440V~

indication of a fault condition

0.5 MZ202

AC shunt trip230-415V AC110-130V DC

allows remote tripping of device

1 MZ203

AC undervoltage - when voltage falls by 35% of Un; fitted with an auxiliary switch

1 MZ206

Looking Kit supplied withoutpadlock

allows locking of the device; toggle in the on/off position; will accept two padlocks . with hasps of 4.75mm diameter max

MZN175

G.18

supply contactortrip

earthleakagerelay

detectiontorroid

conforms to IEC 1008

HR410

HR420

HR804

HR441

Earth leakage relays & torroids

descriptionThese units ensure the protection of electrical installations and the protection of persons against direct and indirect contact.This range of products contains a set of earth leakage relays, designed on an electronic basis, which ensure the monitoring of earth fault currents. When the fault current rises above the selected level, the outputs of the relay operate & depending on the relay selected, it can have both adjustable sensitivity and time delay that can provide selectivity/

discrimination. The relays are linked with detection torroids.common characteristics- positive safety: the relay

trips in the event of a break in the connection between relay and torroid.

- positive / local reset required after a fault is detected.

- protected against nuisance tripping

- class A - output: 1 c/o contact

250V~ 6A AC1- visual display of fault

- supply voltage 230V +/- 20% 50 / 60Hz

- adjustable sensitivity & time delay (sealable)

- display of fault current prior to triggering relay (5%-75%)

- extra output contact (250V-AC1/6A) to enable remote indication of fault currents above 50% of Irn

- remote test and reset by three wire link

torroidcircular diameter;- 35mm

- 70mm- 105mm- 140mmconnection capacityflexible - 1 to 2.5mm- rigid - 1.5 to 4mm


characteristics cat.

ref

earth leakage relaystandard

3 c/o contact 250V 6A ~ AC1 adjustable sensitivity I�n= 0.03/0.1/0.3/0.5/1/3/10Aadjustable time delay�t= 0/0.1/0.3/0.4/0.5/1/3sec

HR410

earth leakage relay premium

3 c/o contact 250V 6A ~ AC1 fail safe contact 250V 6A ~ AC1pre-alarm contact 250V 6A ~ AC1adjustable sensitivityI�n= 0.03/0.1/0.3/0.5/1/3/10Aadjustable time delay�t= 0/0.1/0.3/0.4/0.5/1/3secbargraph = 5% - 75% I�n

HR420

earth leakage relay integral torroid

6 c/o contact 250V6A ~ AC1 adjustable ssensitivityI�n= 0.03/0.1/0.3/0.5/1/3Aadjustable time delay�t= 0/0.1/0.3/0.5/0.75/1sec� of torroid: 35mm

HR441

circular sectiontorroids

of torroid: 35mm HR801

� of torroid: 70mm HR802

� of torroid: 105mm HR803

��of torroid: 140mm HR804

G.19Subject to technical changes

Pro

tect

ion

1

2

31

3

SPD selection for residential, rural and commercial areas

Direct lightning protection

The criteria for installing a lightning protective product.

- Does the installation contain a lightning rod?

- Is the installation adjacent to tall structures, tall trees or near a hill top in a lightning prone area?

If the answer is YES to any of the above, it is recommended to install the SPA212A (3 phase = SPA412A) spark gap device. This will provide protection against direct lightning strikes.

Both references, SPA212A & SPA412A (single & three phase respectively) have dual earth and phase / neutral terminals. This connection method reduces any additional voltage drop in the connecting cables to virtually zero thereby obtaining the best possible Up to the installation. Further installation protection is provided by the fact that the devices are connected in both common and differential modes (L-E/N-E/L-N) together within inbuilt auto protection up to 12.5kA.

If the answer is NO to the above, then a spark gap device is not required.

Tip: If maximum demand of the installation is 125A or less then use both terminal screws per pole for through connection. This will minimise the residual current. If the maximum demand is greater than 125A then tap off each phase for parallel connection. Refer to the user instructions for a wiring diagram.

The next step is the selection of the Transient Protective device.

Indirect Transient ProtectionTo ensure protection of the installation it is vital to have adequate

protection from the harmful effect of transients.

Hager Thunder Day Map

This regional map illustrates the lightning activity across Australia and is based upon the ‘Thunder Day Map’ that appears in AS/NZS 1768 (Int): 2003. This map is compiled by the Bureau of Meteorology.As indicated, the country is split into three zones of activity. The orange zone is maximum exposure, the yellow zone is high exposure and the grey zone is moderate exposure to lightning activity. The process of selecting the correct SPD for protection against transients is a simple one.

- In what region is the installation located?

1 Install SPN165R; the installation is protected from indirecttransients up to 65kA.

2 Install SPN140D/R; the installation is protected from indirecttransients up to 40kA.

3 Install SPN115D/R; the installation is protected from indirecttransients up to 15kA.

Tip: For three phase installations, you will require three of the selected SPDs E.g: 3 x SPN165R

All Hager Class II medium protection products have plug-in cartridges available in two versions:

- SPD’s with a base element and cartridge with a status indicator (to show the end of the life of the device). This is indicated with the suffix D at the end of the item number.

- SPD’s with a base element which contains an auxiliary contact for remote signalling (audible and visual), and a cartridge with a reserve status indicator. The reserve status function has an added intermediate step which indicates that the cartridge needs to be replaced. While the installation is still protected, the cartridge should be replaced as soon as possible. This product is indicated with the suffix R at the end of the item number.

- SPN165 only available as R

The next system consideration is the protection of the installation’s sensitive and valuable electronic equipment.

Equipment Protection

To ensure that today’s and importantly tomorrow’s, sensitive and

valuable electronic devices continue to provide entertainment and

service, it is vital to bring the residual voltage below 800V. This will

minimise the chance of damage to microchips within these devices.

Answering the question below will allow you to ascertain which Hager

device best suits the needs of the installation.

- Does the installation contain electronic appliances? Eg.

TV’s,VCR’s, microwave ovens, Hi-Fi system, computers, fax

machines, DVD players, etc...

If the answer is YES, install SPN208S. By installing this device the

residual voltage (Up) remaining in the system will be less than 800V. If

the installation is 3 phase then install a SPN408S.

If the answer is NO, the installation requires no further protection.

For quick selection of the best SPD product while in the field, please

refer to the Hager ‘pocket size SPD selection guide’.

G.20

SPN505

SPN040D

SPA212A

SPA412A

SPN208S

SPN408S

Surge protective devices

descriptionhager SPD’s protect electric and electronic equipment against transients,originating from lightning and switching transient sources .These transients can cause anything from the premature

aging of equipment, logic failures and down time, to the complete destruction of electrical components and the entire electrical distribution system.Surge protective devices are strongly recommended in sites

that are exposed to lightning, to protect sensitive and expensive electrical equipment such as TV’s, washing machines, Hi-Fi’s, PC’s, VCR’s, alarms etc..

For detailed information, please consult the hager Surge Protective Devices technical handbook

description poles IimpkA

InkA

UpkV

UcV

width in I17.5mm

cat.

ref

Class ISpark gap arresterfor areas where risk of lightning isprevalent.Test wave 10/350us

2

4

12.5

12.5

-

-

<2.5

<2.5

255

255

4

8

SPA212A

SPA412A

description poles Iimp InkA

UpkV

Uc V

width in I17.5mm

cat ref.

Class IIMedium ProtectionMetal Oxide Varistors(MOV’s)high divertingcapacity

11

111

6540

401515

2015

1555

<1.5<1.2

<1.2<1.0<1.0

275275

275275275

11

111

SPN165R SPN140R

SPN140D SPN115R SPN115D

replaceable cartridgereserve option indication and changeover contacton ‘R’ catalogue reference

description poles Iimp InkA

UpkV

Uc V

width in I17.5mm

cat ref.

Class IIFine Protectionto be used incascade withmedium protection devicesRefer to cascade table for Up values

24

88

22

1.21.25

255255

23

SPN208S SPN408S

Designation Poles reservestatus ind.

standardstatus ind.

width in I17.5mm

catref.

Class IIreplacementcartridge forSPN1XXX

11111

YesYes-Yes-

--Yes-Yes

11111

SPN065R SPN040R SPN040D SPN015R SPN015D

designation

line InkA

characteristics width in I17.5mm

catref.

Protection for those devicesconnected to the telephonenetwork. Protection is assured in both common &differential modes.

analog 10 Un: 130vd.cUc: 170vd.c

1.5 SPN505

G.21

Pro

tect

ion

EMERG1W

Emergency lighting discharge test package -1

Red

PUSH BUTTONSVN391

N

Green

15 EET

18

B1 A2 EET

A1

EZN004TIMER

EM1

ES480 CONTACTOR

FROM 6A MCB CONTROL

EM1-1

EMERGENCY LIGHTING

GENERAL LIGHTING

CIRCUIT 1

GENERAL LIGHTING

EMERGENCY LIGHTING

EM1-2

CIRCUIT 2

EMERGENCY LIGHTING

GENERAL LIGHTING

EM1-3

CIRCUIT 3

EMERGENCY LIGHTING

GENERAL LIGHTING

EM1-4

CIRCUIT 4

These breakers are not supplied as part of the standard test package.

A1 A2

1 2

3 4

1 2

3 4

5 6

7 8

1. Standard Emergency Test Components:

SVN391: Momentary Pushbutton, 6A 240V 1 NO (green, Pushbutton A), 1 NC (red, Pushbutton B)

EZNOO4: Delay Timer (EET) Set at 2 hours for initial commissioning (90mins there after) Clauses 2.2.1 and 2.2.2 of AS2293.1-2005

ES480: 4 pole normally closed contactor (EM1) 4P 40A AC1, 240V AC coil

2. Basic Operating Procedure:

Upon engaging Pushbutton A for 1 second the Delay Timer (EET) starts its operation and energises the coil of Contactor EM1. The four normally closed contacts of EM1 then open, initiating the operation of the emergency lights. After 2 hours Timer EET completes its operation, de-energising the coil of EM1 and returning the contacts to the normally closed position. In accordance to AS2293.1-2005 4.3.1(b) the test facility is capable of being manually reset. If the Red Pushbutton is pressed for 1 second, Timer EET resets and is ready for Green Pushbutton to start the timing cycle again.

descriptionThe Hager Emergency Lighting Discharge Test Package has been developed to meet the needs of the electrical industry.

In accordance with AS2293.1-2005 and AS/NZS2293.2 1995 ‘Emergency Evacuation Lighting for Buildings’ a discharge test circuit MUST be installed in both existing and new installation for the purpose of testing the charge.

applicationHager’s EMERG1W offers a convenient and versatile discharge test facility for maintenance of emergency

lighting systems. This package may be mounted separately using the supplied enclosure in situations where space in the switchboard is limited. It can also be included in the hager range of Jyka panelboards by taking advantage of the DIN rail area at the top of the switchboard

The EMERG1W test package includes- 6 pole surface mount enclosure, together with a lockable door- IP 40- 4 Pole 40A N/C Contactor

- push button 1N/O (green) + 1N/C (red)- delay timer 0.1 second to 10 hours

use and implementationThe EMERG1W works on the following principle:Upon engaging the Green push button for 1 second, the timer starts it’s operation and energises the contactor coil. The four normally closed contacts open, initiating operation of the emergency lights. The timer, to be set at 2 hours (2hrs for initial commissioning, 90mins thereafter, completes its operation, de-energising the

contactor coil returning the contacts to the normally closed position.In accordance with AS2293.1-2005 4.3.1(b) the test facility is capable of being manually reset. If the red push button is pressed the timer resets and is ready for the green push button to start the timing cycle again.

This wired ‘off-the-shelf’ package offers the contractor a time saving solution and answers the needs of the industry in regard to the testing and maintenance of emergency lighting systems.


ref

emergency lighting discharge test package - wired

enclosure c/- control gear & internal wiring

EMERG1W

G.22G.22

Emergency lighting discharge test package - 2

Red

PUSH BUTTONSVN391

N

Green

15 EET

18

B1 A2 EET

A1

EZN004TIMER

EM1

ES230 CONTACTOR

FROM 6A MCB CONTROL

EM1-1

EMERGENCY LIGHTING

GENERAL LIGHTING

CIRCUIT 1

GENERAL LIGHTING

EMERGENCY LIGHTING

EM1-2

CIRCUIT 2

These breakers are not supplied as part of the standard test package.

A1 A2

1 2

3 4

1 2

3 4

1. Standard Emergency Test Components:

SVN391: Momentary Pushbutton, 6A 240V 1 NO (green, Pushbutton A), 1 NC (red, Pushbutton B)

EZNOO4: Delay Timer (EET) Set at 2 hours for initial commissioning (90mins there after) Clauses 2.2.1 and 2.2.2 of AS2293.1-2005

ES230: 2 pole normally closed contactor (EM1) 2P 25A AC2, 240V AC coil.

2. Basic Operating Procedure:

Upon engaging the Green Pushbutton for 1 second the Delay Timer (EET) starts its operation and energises the coil of Contactor EM1. The two normally closed contacts of EM1 then open, initiating the operation of the emergency lights. After 2 hours Timer EET completes its operation, de-energising the coil of EM1 and returning the contacts to the normally closed position. In accordance to AS2293.1-2005 4.3.1(b) the test facility is capable of being manually reset. If the Red Pushbutton is pressed for 1 second, Timer EET resets and is ready for Green Pushbutton to start the timing cycle again.

descriptionThe Hager Emergency Lighting Discharge Test Package has been developed to meet the needs of the electrical industry.

In accordance with AS2293.1-2005 and AS/NZS2293.2 1995 ‘Emergency Evacuation Lighting for Buildings’ a discharge test circuit MUST be installed in both existing and new installation for the purpose of testing the charge.

applicationHager’s EMERG2W offers a convenient and versatile discharge test facility for maintenance of emergency

lighting systems. This package may be mounted separately using the supplied enclosure in situations where space in the switchboard is limited. It can also be included in the hager range of Jyka panelboards by taking advantage of the DIN rail area at the top of the switchboard

The EMERG2W test package includes- 4 pole surface mount enclosure, together with a lockable door- IP 40- 2 Pole 25A N/C Contactor- push button 1N/O (green) + 1N/C (red)

- delay timer 0.1 second to 10 hours

use and implementationThe EMERG2W works on the following principle:Upon engaging the Green push button for 1 second, the timer starts it’s operation and energises the contactor coil. The two normally closed contacts the open, initiating operation of the emergency lights. The timer, to be set at 2 hours (2hrs for initial commissioning, 90mins there after) completes its operation, de-energising the contactor coil returning the contacts to the normally closed position.

In accordance with AS2293.1-2005 4.3.1(b) the test facility is capable of being manually reset. If the red push button is pressed the timer resets and is ready for the green push button to start the timing cycle again.

This wired ‘off-the-shelf’ package offers the contractor a time saving solution and answers the needs of the industry in regard to the testing and maintenance of emergency lighting systems.


ref

emergency lighting discharge test package - wired

enclosure c/- control gear & internal wiring

EMERG2W

G.23

Energy Distribution Enclosure systemsWiring Accessories + Building Automation

Cable management

Energy distributionProtection(sec. G.)

there are times when you’reglad you were prepared...

Surge Protection

Ask yourself...What is the total value of all your electrical appliances, entertainment and IT equipment?

Be preparedHager’s three step (cascade) system approach will ensure you have the best level of protection for all your valuables. A proven solution from Europe’s leading manufacturer.A small investment, for you and your family.

www.hagerbr.com.au

G.24

This section provides a range of switches, voltmeters, ammeters, push buttons, indicator lights, transformers, bells and buzzers that are used for isolation, installation monitoring and circuitry control.

Energy distributionControl & indication

Con

trol

&

ind

icat

ion

H.1

Isolating switches H.2

Changeover switches H.3

Selector switches voltmeters and ammeters H.4

Indicator lights H.5

Push buttons H.6

Analogue voltmeters, ammeters H.7

Current transformers (CT’s) H.8

Digital voltmeters, ammeters H.9

Digital multimeter H.9

Kilowatt hour meters and hours counter H.10

Transformers, bells and buzzers H.11

Dimmers - range overview H.12

Dimmers H.13

Dimmer system - 1/10V pilots H.16

Motion detectors - IP55 H.17

Motion detectors H.18

Presence detectors H.20

H.2

SB163T

SB499T

N

45

68

44

Isolating switches

descriptionfor use as a switch isolator in all types of circuits. As defined in AS/NZS3000-2007, clause 2.3.3.2, domestic installations require no more than one main switch for each metered supply.

technical data- In : 40, 63, 80A

(1, 2, 3 pole)- AC 22B dutyspecification (mixedresistive and inductiveloads. Not motors)

connection capacity:25mm2 rigid cables16mm2 flexible cables

- In : 63A & 100A(1, 2, 3, 4 poles)- AC 22B dutyspecification (mixed resistive and inductive loads. Not motors)

-50mm2 rigid cables-35mm2 flexible cables


cat.

ref

single pole 1 x 40A 250V~ 1 SB140T

1 x 63A 250V~ 1 SB163T

1 x 80A 250V~ 1 SB180T

1 x 100A 250V~

1 SB199T

double pole 2 x 40A 250V~ 1 SB240T

2 x 63A 250V~ 1 SB263T

2 x 80A 250V~ 1 SB280T

2 x 100A 250V~

1 SB299T

triple pole 3 x 40A 400V~ 3 SB340T

3 x 63A 400V~ 3 SB363T

3 x 80A 400V~ 3 SB380T

3 x 100A 400V~

3 SB399T

four poleneutral right

4 x 63A 400V~ 4 SB463T

4 x 100A 400V~

4 SB499T

Con

trol

&

ind

icat

ion

H.3

SF115

SF219

SF263

NEW

Changeover switches

2 way, centre off modular change over switchesdescriptionmanual change over switches for the control between two power supplies


cat.ref.

double pole

1 3

2 4

2 x 25A 250V~ 1 SF115

switch, 2 ways single pole

2 4

1

1 x 25A 250V~ 1 SF118

switches centre - offchangeover

1 x 25A 250V~ 1 SF119

double pole

2 4

1

6 8

5

2 x 25A 250V~ 2 SF218

switches centre - off changeover

2 4

1

6 8

5

2 x 25A 250V~ 2 SF219

double pole 2 x 63A 230V~ 4 SF263

four pole 4 x 63A 400V~ 8 SF463

SF263 - double pole SF463 - four pole

H.4

SK602

SK603

SK606

��

�

�

��

��

�

��

��

��

��

�

�

��

��

�

�

�

��

��

��

� � ��

��

��

��

��

�

��

��

�

� ��

��

�

��

�

��

��

��

�

�

Selector switches voltmeters and ammeters

descriptionTo provide command signals or program selection in electri-cal control schemes

ApplicationFor domestic and commercial installations

Connection capacity :- Rigid conductor : 1.5 to 10mm2

- Flexible conductor : 1 to 6mm2

Conform to IEC947-3 BS EN 60947-3

Isolating voltage : 500V~Nominal current : 10-20A

description characteristics width in 17.5mm

cat.ref.

1 pole selector switch 20A 400V~non spring return

3 SK600

2 pole selector switch 20A 400V~non spring return

3 SK601

Voltmeter selector 3Ph&N3 readings between phases3 readings between phase & neutral null position (no reading)

20A 400V~ 3 SK602

Ammeter selector4 positionsuse in 3Ph&Nreading by phase0 position (no reading)should be used with current transformer (CT)

20A 400V~ 3 SK603

Step selector switch 20A 400V~ 3 SK604

Key selector switch 10A 400V~ 3 SK606

spare keyfor SK606

SK001

Con

trol

&

ind

icat

ion

H.5

SVN122M SVN125M

SVN124M

SVN121M SVN122M

SVN126M SVN127M

Indicator lights

descriptionIndicator lights and push buttonsThese products are used for remote controlling signalisation of any event in any electric installation (domestic, tertiary & industrial)

LED technology providing longer life, new design and integrated label holder.

connection capacity- 10mm2 rigid cable- 6mm2 flexible cable

Standard conformity:IEC 62094-1 for indicatorlights


cat.ref.

indicatorlights

with light230V~

1 x green 1 SVN121M

1 x red 1 SVN122M

1 x blue 1 SVN124M

1 x clear 1 SVN125M

1 x green/red 1 SVN126M

3 x red 1 SVN127M

H.6

SVN311M

SVN413M

45

68

44

Push buttons

description2 versions:- impulse push buttons- latching push buttons

These versions with indicator lights are equipped with green or red diffuser. (led technology)

connection capacity- 10mm2 rigid cables- 6mm2 flexible cables

Standard conformity:IEC 60947-5-1 for push buttonsIEC 62094-1 for indicator lights


cat.ref.

pushbuttonsimpulse

without indicator light16A - 250V~

contacts: 1NO 1 SVN311M

contacts: 1NC 1 SVN321M

contacts: 1NO+1NC(stop / start)

1 SVN391M

pushbuttonsimpulse

with indicator light

contacts: 1NO green

1 SVN411M

contacts: 1NCred

1 SVN422M

pushbuttonslatching

without indicator light16A - 250V~

contacts: 1NO 1 SVN312M

contacts: 1NO + 1NC 1 SVN352M

pushbuttonslatching

with indicator light

contacts: 1NO green

1 SVN413M

Con

trol

&

ind

icat

ion

H.7

* Please check availability with your local Hager B&R sales office at time of ordering*

SM500*

SM030*

Analogue voltmeters, ammeters

descriptionfor domestic and commercial installations- single phase :direct connection- three phase :

use of a voltmeterselector switch SK602

frequency : 50/60Hzconnection capacity- 10mm2 rigid- 6 mm2 flexibleanalogue ammetersfor domestic and commercial installations

direct reading :up to 30Aindirect reading via current transformers:50, 100, 150, 250, 400, 600A


cat.ref.

analogue voltmeter accuracy : 2%consumption : 2.5VA0 - 500V

4 SM500*

analogue ammeterdirect

0 - 5A 4 SM005*

0 - 15A 4 SM015*

0 - 30A 4 SM030*

analogue ammetercurrent transformeroperated

accuracy : 1.5% (full scale)

- reading via CT SR 051 scale : 0 - 50A 4 SM050*






H.8

SR300

SR 051

21mmØ

34mmØ22mmØ

0L1L2

L2L3

L3L1

SK 602

L1

L2

L3

SM 500

1000200 400

500

V

300

3 51

244 62

7

8

9

10

Current transformers (CT’s)

descriptionCurrent transformers are used to feed analogue and digital ammeters, as well as kWh meters.Their current on secondary circuit (0-5A) is proportional to the current on primary circuit class : 1

- can be mounted on copper busbar or on cable

- can be mounted on DINrail with adaptors

description characteristics cat.ref.

current transformers (CT)* ratio:

for use with SM050 50/5 SR051






Electrical connection (voltmeter) Electrical connection (ammeter)

Current transformations (CT)Technical specifi cationsElectrical characteristics- primary current: 50 to 400A (depend. on model) secondary current: 5A- frequency: 50/60Hz

Range of CT’sSR 051: 50/5ASR 101: 100/5A

SR 150: 150/5ASR 200: 200/5ASR 250: 250/5A

SR 300: 300/5ASR 400: 400/5ASR 600: 600/5A

busbar entry = 30mm x 10mm busbar entry = 40mm x 10mm

Con

trol

&

ind

icat

ion

H.9



SM020*

SM001

SM501

Digital multimeter

Digital voltmeters, ammeters


cat.ref.

Digital voltmeter voltage rating :220/230V; 50/60Hzaccuracy : ±1%consumption : 4VAscale : 0 -500V

4 SM501

Digital ammeters voltage rating :220/230V; 50/60Hzaccuracy : ±1%consumption : 4VA

- direct scale : 0-20A 4 SM020*

- reading via CT150/5A(SR 150)

scale : 0-150A 4 SM151*

- reading via CT 400/5A (SR 400)

scale : 0-400A 4 SM401*

- reading via CT 600/5A (SR 600)

scale : 0-600A 4 SM601*

Digital voltmetersSM501For domestic and commercial installations.

- three phase : use of a voltmeter selector switch SK 602- Digital ammeters from SM 020 to SM 911 SM 020 : direct reading from SM 151 to SM 601 :

reading via a current transformer (see below)

MultimeterFor monitoring the electricalnetwork : single, two or three phases (with or without neutral).Connection on current transformer (not provided).

Enables the display 3 electrical values at the same time, as instantaneous, average or maximum (voltage and intensity per phase in RMS value).

For monitoring of powergenerator, it measures the frequency and working time.


cat.ref.

Multimeter voltage supply: 230/400V50/60hz

4 SM001*

displayvoltage

- 35-480V

- accuracy + 0.5%

- consumption: <0.5VA

current - via c/t

- primary 5-8000A

- secondary 0.1-6A

- accuracy: + 0.5%

- consumption: <0.5VA

frequency - range 40-80hz

- accuracy: + 2hz

hour counter - 7 digits 999999.9

H.10


EC050

EC121*

EC321*

45

5741

Kilowatt hour meters and hours counter

descriptionkilowatt hour meters measure the active energy used in an electric installation. The range includes meters with pulsed output for remote indication or linking into an energy management system.kWh meters can be used for local metering of installations or monitoring of power consumption in individual machines.

All meters offer part (resettable) counter and total (non-resettable) counter(except EC050/ EC051)In addition meters are available for direct or CT operated with single or dual tariff. (second tariff is suitable for ‘time of use’ not ‘off-peak’)

technical data- in accordance to

IEC61036, class 1 & class 2 accuracy

- display with a LCD7 digits (6+1)

- single and doubletariff options

- with pulsed output- For CTs refer to page I.2


cat.ref.

single phasedirect reading

230V 50Hz20mA to 32A

1 EC050

230V 50Hz20mA to 32Apulsed output

1 EC051

single phaseCT operation

230V 50Hz100/5A CT operatedsingle tariff

3 EC120

230V 50Hz100/5A CT operateddual tariff

3 EC121*

sealing kit for single phase kwh meters direct reading only(EC110, EC111)

EC001

three phasedirect reading

400V 50Hz800mA to 80Asingle tariff

7 EC310

400V 50Hz800mA to 80Adual tariff

7 EC311*

three phaseCT operated

400V 50Hz50 - 1500/5A CT operated single tariff

4 EC320

400V 50Hz50 - 1500/5A CT operated dual tariff

4 EC321*

hours counter 230V 50Hz 2 EC100*

Con

trol

&

ind

icat

ion

H.11


ST312*

SU212*

SU214*

58

44

45

Transformers, bells and buzzers

descriptionprovide safety extra low voltage 8, 12, 24V~.technical data- secondary voltage : 8V,

12V, 24V- bell transformers are

short - circuit protected- bells/buzzers : Max

continuous duty < 30minutes

connection capacity- cable clamp typeoutput- Bells : 85 dBA- Buzzers : 78 dBAWhen a bell transformer is installed in an enclosure with mains voltage equipment, 230V cable should be used on the secondary side of the transformer or extra low voltage cable should

be sheathed within the enclosure.noteThe transformers have a higher no load voltage. The stated voltages correspond to the voltages at nominal load


cat. ref.

safety

transformers

230V / 12-24V~

50/60Hz

25VA 50/60Hz 4 ST312*

60VA 50/60Hz 6 ST315*

bell transformers

230V/8~12V~50/60Hz

8VA - 8V : 1A

-12V : 0.67A

2 ST303*

230V/8 -

12V~50/60Hz

16VA - 8V : 2A

-12V : 1.33A

- 24V : 0.67A

3 ST305*

bells 8/12V~

4VA - 0.35A

1 SU212*

230V~

6.5VA - 0.03A

1 SU213*

buzzers 8/12V~

4VA - 0.35A

1 SU214*

230V~

6.5VA - 0.03A

1 SU215*

H.12 Subject to technical changes

��

��

��

��

Transformers

Safety transformersThese transformers are designed to ensure personal safety, their primary winding are electrically separated from their secondary windings and they are intended to feed safety extra low voltage (SELV) circuits < 50V. A thermal overload, in the primary windings, ensures that if a short circuit or an overload occurs in the output it will not damage the device.

Bell transformersBell transformers are similar to safety transformers but the secondary voltages do not exceed 24 volts, they are also similarly protected against short circuits and overloads, by thermal protection in the primary winding.

Technical specification

Reference ST303 ST305 ST312 ST315

Nominal power 8VA 16VA 25VA 60VA

Designation bell bell safety safety

Primary voltage U1 230 volts 230 volts 230 volts 230 volts

Secondary voltage U2 8 volts 8 volts 12 volts 12 volts

In = 1A In = 2A In = 2.08A In = 5.25A

U3 12 volts 12 volts 24 volts 24 volts

In = 0.67A In = 1.33A In = 1.04A In = 2.63A

No load secondary U2 15 volts 12.4 volts 14 volts 13.6 volts

voltage U3 21.8 volts 18.5 volts 29 volts 27 volts

Galvanic insulation 4kV 4kV 4kV 4kV

Max functional temperature 35°C 35°C 35°C 35°C

Overload and S/C protection thermal cut out in the primary winding

number of products that can be operated simultaneously by a transformer

transformer reference ST303 ST305 ST312 ST315

8V 12V 8V 12V 12V 24V 12V 24V

power (VA) 8 8 16 16 25 25 60 60

bell SU212 8/12V 3 2 5 3 - - - -

buzzer SU214 8/12V 3 2 5 3 - - - -

H.13Subject to technical changes

system dimmers1-10 V pilots

EV106 EV108

dimmers 300 W

EV011 EV012

universal dimmers 600 W

EV002 EV004

system dimmersuniversal dimmers 1000 W

EV100 EV102

FU

TU

RE

RE

LEA

SE

Dimmers- range overview

Incandescent/halogen 230V

Halogen ELV (12 or 24V) via electronic transformer

1/10V control (output only)fluoro with electronic 1/10V ballast

Input 1/10 V, 50 mA

Halogen ELV (12 or 24V) ferromagnetic transformer suitablefor dimming. The transformer shouldn’t be used with less than 75% of nominal load

functioning as a standalone product

0W 20W 60W 100W 300W 600W 1000W

EV011, EV012

EV002, EV004EV100, EV102 switch to “local” position

EV011


EV012


EV102 pilot : switch to “master” position

EV 102 pilot : switch to “master” position

functioning in system : association of dimmers with 1/10V max 30 x 1kW

EV102 + n x EV100 or EV102 (slave position)

EV106


EV 102 pilot : switch to “master” position


EV108 with scene inputs

300 W 600 W 1000 W Pilot 1/10 V

Technical featuresEV011EV012

EV002EV004

EV100 EV102 EV106 EV108

Controls available - on the product - external with illuminated pushbutton- input 1/10 V- ambient lighting setting

-yes--

yes yes -1 (EV004)

yes yes yes (slave)-

yes yes yes (slave)2 levels

yes yes --

yes yes -2 levels

Types of outputs :- direct (capacitive/inductive load)- input 1/10 V

yes -

yes -

yes -

yes yes (master)

-yes

-yes

Functions :- protection overheating / overloads- level indicator- memory- softstart

yes *-yesyes

yes EV004yesyes

yes -yesyes

yes yesyesyes

yes yes yes -

yes yes yes -

Parameter setting :- mini, max. level- dimming speed- speed at start / stop- transition speed for level call

----

EV004EV004EV004-

yes yesyesyes

yes yesyesyes

yes yesyesyes

* EV011 : protection via integrated fuse, electronic protection for other products

H.14

EV011*

EV004*

LZ060

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Dimmers

Common characteristics :- Softstart (progressive start) to increase the working live of lamps- last dimming level memorised- protection against overheating- control possible by illuminated pushbutton until 5mA.

Dimmer300 W :- control by several pushbuttons- can replace a latching relay with dimming function

Dimmers 600 and 1000 W :- universal products with automatic recognition of the load

type (inductive/capacitive)- electronic protection against overheating and overload- Indicators : 230 V / overheating / overload


cat.ref.

Dimmers 300 Wfor :- incandescent 230 V- halogen 230 V- ELV halogen lamps with :• ferromagnetic trans-former (inductive load EV 011 )• dimmable electronic transformer (capacitive load (EV 012 )

20 ... 300 W / VA230 V / 50 Hzinductive load

capacitive load

1

1

EV011*

EV012*

Universal remote control dimmer 600 Wfor :- incandescent 230 V- halogen 230 V- ELV halogen lamps supplied by ferromagnetic or dim-mable electronic trans-former(cos w � 0,95)

20 ... 600 W / VA230 V / 50 Hz- products with automatic loadrecognition- dimming function

4 EV002*

Enhanced universal dim-mer 600 W

in addition to EV 002 features :- min/max level setting- recall mode with pushbutton, override mode with switch - scene level setting0 ... 99 %

4 EV004*

Heat dissipation insert 0.5 LZ060


Con

trol

&

ind

icat

ion

H.15

EV102*

EV100*

FU

TU

RE

RE

LEA

SE

Dimmers


cat.ref.

Universal dimmer 1000 W for :• Functional mode selection via local switch :- control via pushbutton (local)- remote control via 1/10V (slave)• Min/Max setting via potentiometer• LED indication :- 230V power supply/load error- overload / overheatingLoad type :- incandescent- 230V halogen lamps- ELV halogen lamps associated to ferromagnetic transformer (inductive)- ELV halogen lamps associated to electronic transformer (capacitive)

230 V AC / 50 Hz

20 ...1 000W

1/10V-input

5 EV100*

Universal dimmer 1000 W with scene inputs• Functional mode selection via local switch :- control via pushbutton (local)- remote control via 1/10V (slave)- control of the other dimmers as 1/10V (master)• Display to show the dim level and to set the parameters: - dimming rise time (4s ..99s)- min dim level (0...49%)- max dim level (51..99%)- rise time when switching ON (1s..99s)- fall time when switching OFF (1s..99s)- scene level- dimming rise time for each scene- scene working mode :recall or override mode• Output contact to display the dim state (load is OFF, contact is opened, if load is dimmed the contact is closed)• LED indication :- 230V power supply / load error- overload / overheatingLoad type :- incandescent- 230V halogen lamps- ELV halogen lamps associa-ted ferromagnetic transformer (inductive)- ELV halogen lamps asso-ciated electronic transformer (capacitive)

230 V AC / 50 Hz

20 ...1 000W

1/10V-input/output(max. 50mA, 30 EV100 / EV102) defined via the local switch

Contact output :1 NO, 250V AC1, potential free

5 EV102*


H.16

EV106*

EV108*

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Dimmer system : 1/10V pilots

EV 106 and EV 108 pilot dimmers- To control several dimmers

or electronic ballasts via the 1/10V output

- Display to show the dim level and for parameter setting

- Wiring of illuminated push buttons possible up to 5mA

- Min/max level setting- Contact output for state information- Dimming rise time setting- Setting of rise time and fall

time EV 108 pilot dimmer- Scene inputs used for over-

ride (3 levels) or simple recall (2 levels).

Use : to control lighting in meeting

and conference rooms, or in restaurants

Dimmers conform to standards EN 50081-1, EN 50082-1,CEI 669-1, CEI 669-2-1.


cat.ref.

1/10V pilot dimmer

• To control EV100 and EV102 (max. 30)

• To dim electronic ballasts• Wiring of illuminated

pushbuttons possible up to 5mA

• Display to show the dim level and to set the parameters:

- dimming rise time (4s ..99s)- min dim level (0..49%)- max. dim level (51..99%)Contact output to display the dim state (load is OFF, contact is opened, if load is dimmed the contact is closed). It is used to switch ON/OFF the electronic ballast

230 V M / 50Hz

1/10V - interfaceOutput /max 50mA

contact output :1NO, 250V AC 10A AC1 potential free

4 EV106*

1/10V pilot dimmer with scene input

In addition to EV106 features :• Scene inputs used for

override (3 levels) or simple recall (2)

• For each scene- dimming rise time- scene level- and scene mode (recall or- override)

4 EV108*


Con

trol

&

ind

icat

ion

H.17

EE806

EE871

EE870

EE872

Sensitivity:Min. 20%Max. 100%

1 sec5 sec - 15 min

Lux5-1000

Remote Control

I R- +

lux

autotest15 min

5 s5 min

16 m

4 m

8 m 16 m

2,5 m

Ø 6 m

10 m

10 m

α = 220/360°

Motion detectors- IP 55

Premium detectorsThese devices are made forautomatic control of lighting in both the residential and private/public industry sectors.

They automatically switch on lighting when movement is detected. They turn off the circuit after the preset duration.

They bring comfort and enhance security for exterior accesses to residential homes, garages. They also

provide signifi cant savings in lighting power consumption by illuminating only when necessary.

Two Models:Products are equipped with Fresnel lenses that allow high frontal detection performance and downwards detection:- 220° frontal detection zone- Twin 220°/360° to detect in

a frontal & downwards zone.

- Time, Lux, sensitivity are achieved locally, via potentiometers.

- It’s also possible to set the detectors with an IR remote control which provides speed & convenience when setting fi nal adjustments.

- Detectors can be mounted in corners utilising the relevant corner mounting accessory.

description characteristic features

detector - 220°- 220°/360°

IP55230 V~ 50 Hz/60Hz

16 A AC1 potential free2300W incandescent

Detection range: - 220°- 220°/360°

16m frontal & 10m left/right 16m frontal & 10m left/right & 6m diameter down

Lux Timer

Sensitivity

5 to 1000 luxpulse, 5s. -> 15 min (30 min with IR remote control).Min. 20%, max.100%

description cat.ref.

comfort Line

Detector 220° White EE860

Detector 220° Charcoal grey EE861

Detector 220° Titanium grey EE862

evolution Line

Detector 220/360° White EE870

Detector 220/360° Charcoal grey EE871

Detector 220/360° Titanium grey EE872

Remote control IRSets time, sensitivity, lux, detection angle used (for Twin model), lock/unlock, test and override ON/OFF

EE806

Corner mounting accessory White EE855

Corner mounting accessory Charcoal grey EE856

Corner mounting accessory Titanium grey EE857

H.18

EE805

EE804

Motion detectors

descriptionThese devices are made for automatic control of lighting in both the residential and private/public industry sectors.

They automatically switch on lighting when movement is detected and light is needed.

They turn off the light after a preset duration.

- Movement detector for the automatic control of lighting in indoor circulating zones. Surface mounted (EE 804) or flush fitting (EE 805).- Setting The timer and the lux level are defined via potentiometers

- Mounting of EE805 connection system conform of false ceiling installation standards (cable clamp, fixing spring and protection cover)- Output Potential free relay contact 10A, AC1 1000W


Motion detectors - indoor 360o

white surface mount 10A, AC1

1000w

Incandescent

EE804

white flush mount 10A, AC1

1000w

Incandescent

EE805

Con

trol

&

ind

icat

ion

H.19

Innovative techniqueThe patented double lens technique ensures a very precise detection on 360° of a person moving on an area up to 13 x 7 m. The integrated lux-meter makes it also possible to differentiate the proportion of natural and artificial light.

Rotating and adaptableAccording to the architectural constraints, the detection zone can be adjusted with precision thanks to the rotation of lens on 90°.

OverrideThe command entry on the 2 channel presence detector (EE811) and on the presence regulator (EE812) allows the activation

of a lighting circuit (for example via a push button). This facility is ideal for presentations during which the room must completely or partially darkened. When no more presence is detected the module will return to the automatic mode after the pre-selected time delay. Manual dimming is also possible via the same command entry on the presence regulator.

Regulation with constant lighting: nearly a must in all open-plan offices. The presence regulator (EE812) adapts to the artificial light depending on natural light and presence. The light intensity constantly remains fixed according to the preselected set point. An effective and pleasant lighting level can be carried out easily and quickly with the range of Hager DIN rail dimmers.

Settings : lighting, time delay and manual dimming. Adjustable from 5 to 1200 Lux, the lighting/variation can also be set manually via the command entry on the presence regulator. The time delay of the lighting and presence channel can be selected individually from 30 seconds to 1 hour.Basic lighting mode : for safety in hotels, homes, hospitalsand corridors. The

detector will switch on the lighting channel in case of presence. The time delay begins once no more presence is detected. The light will then be reduced to the selected value between 0 and 50%, then released after 15 minutes for the EE812 model.

Master and slave : extended coverageThe presence detectors can be linked together for corridors or large premises. The Slave module will for example detect a presence, inform the Master module which then commands the light depending on luminosity, override and duration of lighting.

Comfortable energy saving …with the presence detectors

Benefi ts :

- Models with 1 or 2 channels- Regulation of presence / light- Detection zone of 360° on 13 x 7 m- Override entry or manual dimming- Natural and artificial light measuring- Wide setting possibilities- Basic lighting mode on presence regulators EE812 - Master/Slave function

For the control or the regulation of lighting depending on presence and natural light The new Hager presence detectors with double lens technique are adapted to all architectural requirements. Whether the regulation of the light depends on occupancy or simply to switch on the lights depending on presence and ambient luminosity, the Hager presence detectors offer the necessary flexibility for each application.Ventilation, ambient temperature or alarms can also be piloted exclusively by the detection of a movement thanks to the second channel. A push button connected on the override entry makes it for example possible to turn-off the light or reduce it to the desired level during a presentation.

comprehensive settings

rectangular capture zone

natural and artificial light measure

rotating front lens

H.20

EE810

EE813

2.5m

6m

DetectionZone

Presence detectors


presence detector 1 channel• relay output light channel- lux level and on delay(duration or pulse) defined viapotentiometers• Slave output for association with EE811/EE812 Lux OFF

230V~ 50Hzμ16A AC1 100W

triac output 0.8A

EE810

Presence detector 2 channels• Relay output light channel- lux level and On delay define via potentiometers- input slave - 230V input used with pushbutton to toggle the light channel state or with slave in order to enlarge the detection area

• Relay output presence channel- on delay presence defined via potentiometer

230V~ 50Hzμ16A AC1

230V input 50Hzμ2 A AC1

EE811

Presence detector 1/10V• Relay output used to switchON/OFF the electronic ballast• 1/10V output used to dim an electronic ballast or Hagerdimmers EV100/EV102• 230V input used with push button to toggle the channelor change the dimmed level or withslave in order to enlarge thedetection area • 3 functional modes defined viapotentiometersmode 1 : no regulationmode 2 : regulation with local set point via potentiometermode 3 : regulation with set pointdefined via a remote push button

230V~ 50Hzμ10 A AC1

1/10V 50mA230V input 50Hz

EE812

Accessorymounting accessory - surface

mounting accessory - recessed

EE813

WE741

High performance detectorsEE810, EE811 and EE812 High performance presence detector that will be used in premises or in passage areas, where they increase comfort and reduce drastically the energy costs.Combination of a presence area and a motion area. The presence area is especially interesting in offices, where the motion area may be used in long corridors.Head rotation for detection

area adjustment Settings via potentiometersApplicationsEE810 - 1 channel detectorDirect control of a light load or used as a slave for detection area enlargement.- Lux level and ON delay setting via potentiometers- Test mode in order to set lux level and the detection patternEE811 - 2 channels detector- Light relay output for direct control of a light load

- Presence output potential free relay.- Lux level, on delay setting for light channel and presence channel via potentiometers- Input for slave (EE810) and/or remote push button.EE812 - Light regulator 1/10VLight regulator with 1/10V output in order to control electronic ballasts and/or Hager dimmers EV100/EV102. Detector especially dedicated for energy saving and comfort purpose.

- Input for slave (EE810) and/or dimming pushbutton in order to modify the setpoints- Lux level, On delay for light channel and min level via potentiometers- 3 functional modes : no regulation, regulation with local setpoint, regulation with remote setpoint

EE813 : accessory to surface mounting

H.21


Cable management

wiring accessories + building automation(sec. K.)

make the switchin your beautiful home

First-class quality, real glass elegance

To keep up with today’s trends, you need to move ahead of them and embrace the technology of tomorrow.

Create a modern look in your home or office - matching glass splashbacks to glass power points; flat screen TVs to flat panel glass switches. The classic and linear appeal of real glass has never been more achievable in so many places at once.

For more information on the available ranges please go to wiring accessories section K.

www.hagerbr.com.au

H.22

The scheduling of energy management solutions, including the management of lighting and heating, help to make life easier while also saving energy. Various loads are only switched on when they are actually needed, thereby saving unnecessary usage of energy. Digital and analogue time switches, delay timers, latching relays, contactors, kWh meters and CTs complete the offer.

Energy distributionModular devices

Mod

ular

dev

ices

I.1

Contactors I.2

Noise free contactors I.3

Choice of contactors I.4

Latching relays I.7

Latching relay auxiliaries I.7

Interface relays I.8

Delay timers I.9

Time lag switches I.10

Analogue time switches modular I.11

Analogue time switches 72 x 72mm I.12

Digital time switches selection chart I.13

Digital time switches I.14

Light sensitive switchesAstronomical time switches I.15

Light sensitive switch - 2 channel I.16

Time switches & light sensitive switches selection chart I.17

I.2

ES240

ES320

ES463

45

58 37

Contactors

contactorsfor the remote switching and control of power circuits (25A-63A AC1)override contactorsallows :permanent ONpermanent OFF# manual override## auto override technical datathe choice of contactor depends upon a number of

parameters e.g.- the nature of the supply- the current it is

switching- the characteristics of the

load- the control voltage

requiredAll contactors carry an Ith load rating. The use of LZ060 (heat dissipation inserts) between all contactors installed

or between contactors and adjacent devices is recommendedoptionscontact choice- normally open (NO)- normally closed (NC)

LZ060 heat dissipationinserts

auxiliary25A contactors will except auxiliary EP071 contact

description type coilAC 50/60Hz

powercircuit50/60Hz

AC1/AC3 width in I17.5mm

cat.ref.

contactors 1NO

1NO

230V

230V

25A-250V

25A-250V

4kW/1.4kW

4kW/1.4kW

1

1

ES110

ES110A#

1NO+1NC 230V 25A-250V 4kW/1.4kW 1 ES210

1NO+1NC 24V 25A-250V 4kW/1.4kW 1 ES239

2NO 230V 25A-250V 4kW/1.4kW 1 ES220

2NO 230V 25A-250V 4kW/1.4kW 1 ES220A#

2NO 230V 25A-250V 4kW/1.4kW 1 ET221##

230V 40A-400V 8.5kW/3.5kW 3 ES240

230V 63A-400V 13kW/5kW 3 ES263

24V 25A-250V 4kW/1.4kW 1 ES224

24V 25A-250V 4kW/1.4kW 1 ES224A#

2NC 230V 25A-250V 4kW/1.4kW 1 ES230

3NO 230V 25A-400V 13kW/4kW 2 ES320

230V 40A-400V 25kW/10kW 3 ES340

230V 40A-400V 25kW/10kW 3 ET341##

4NO 230V 25A-400V 13kW/4kW 2 ES420

230V 25A-400V 13kW/4kW 2 ES420A#

230V 40A-400V 25kW/10kW 3 ES440

230V 63A-400V 40kW/15kW 3 ES463

4NC 230V 40A-400V 25kW/10kW 3 ES480

230V 63A-400V 40kW/15kW 3 ES490

2NO+2NC 230V 25A-250V 4kW/1.4kW 2 ES450

230V 63A-250V 13kW/5kW 3 ES470

auxiliary suitable for 20A contactors 2A-250V 1/2 EP071

heat dissipation insert 1/2 LZ060

I.3

Mod

ular

dev

ices

ESN420B

ESN440B

60

35

5.5

43

Noise free contactors

Noise free Contactorsfor the remote switching and

control of power circuits (25A - 63A AC1)

Eg. lighting, heating, ventilation, pumps and other building automation systems. These contactors are DC driven with integrated rectifier allowing DC or AC voltage control.

Advantages- Hum free- Low noise switching- Position indicator- Coil protection

(varistor)- Suitable for use with

PLCs

description type coilAC 50/60Hzor DC

powercircuit50/60Hz

AC1/AC3 width in 17.5mm

cat.ref.

contactors 2NO 230v 20A-230V 4kW/1.3kW 1 ESN220B

230V 40A-400V 8.7kW/3.7kW 3 ESN240B

230V 63A-400V 13.3kW/5kW 3 ESN263B

3NO 230V 25A-400V 16kW/4kW 2 ESN320B

230V 40A-400V 26kW/11kW 3 ESN340B

4NO 230V 25A-400V 16kW/4kW 2 ESN420B

230V 40A-400V 26kW/11kW 3 ESN440B

230V 63A-400V 40kW/15kW 3 ESN463B

4NC 230V 25A-400V 16kW/4kW 2 ESN430B

3NO+1NC 230V 25A-250V 5kW/1.3kW 2 ESN444B

auxiliary suitable for 25A contactors 6A-250V 1/2 ESN071B

heat dissipation insert 1/2 LZ060

I.4 Subject to technical changes

Choice of contactors

HeatingThe choice of the contactor depends on the mechanical stress (number of operations) and on the electrical heating load i.e. resistive elements, infra-red element, convectors.

Choice of contactorsThe choice of contactor is dependent upon many parameters i.e. operating voltage, size of contacts, number of operations, ambient temperature, type of load supplied etc.

Type of loadLoads are categorised into various AC ratings. Slightly inductive loads (i.e. household appliances and similar applications) are given the category AC-7a. Hager contactors have been tested to IEC61095 which defines the current ratings and utilisation category as follows:

*Ith is the conventional free air thermal current and is the maximum value of test current used during temperature-rise tests. The value of Ith must be at least equal to the maximum value of the current Ie. Ith is a “static current” with no switching involved.

*Ie*

Ie is the rated operational current.This value takes into account:- the rated operational voltage

Ith (The value of Ith must be at least equal to the maximum value of the current Ie.)

Ie is a “dynamic current” allowing the contacts to open and close for a given load utilisation category.

*Utilisation category **ACx*

The Utilisation category defines the intendedapplication and is characterised by- the current Ie

- a voltage- a power-factor

Hager contactors are approved according to EN/IEC 61095 for the utilisation category AC-7a and 7b. Approved to IEC 60947-4 for the utilisation categories ACI and AC3

For AC1 and AC3 ratings see chart below.

Heat dissipation insertsTo avoid any product overheating it is strongly advised to insert a heat dissipation space every 3 contactors up to 40oC and every 2 contactors from 40 to 55oC.

Temperature deratingDerating factor between 40oC and 55oC = 0.9

Please consult us if you require help selectinga suitable contactor.

Maximum load in kW (AC1 / AC7a - eg. heating)

1 module20A

2 module20A

3 module (2 pole)40A

Standard range Noise free Std range Noise free Std range Noise free

Load type Voltage

(a.c.)

Maximumnumber ofoperations

ES110 ES110A

ES210 ES239 ES320 ESN320B

ES220 ES220A ES420 ESN420B

ET221 ES224 ES420A ESN430B

ES224A ES230 ESN220B ES450 ESN444B ES240 ESN240B

AC1/AC7a 230200 000 4kW 4kW 5kW - -

100 000 4kW 4kW 5kW 8.5kW 8.7kW

AC1/AC7a 400200 000 - 13kW 16kW - -

100 000 - 13kW 16kW 8.5kW 8.7kW

3 module (3&4 pole)

40A



Std range

Noise free

Std range

Noise free

Std range

noise free

ES340


ET341

Voltage(a.c.)

ES440 ESN340B ES470 ES490

Load type ES480 ESN440B ES263 ESN263B ES463 ESN463B

AC1/AC7a 230200 000 - - - - - -

100 000 8.5kW 8.7kW 13kW 13.3kW 13kW 13.3kW

AC1/AC7a 400200 000 - - - - - -

100 000 25kW 26kW 13kW 13.3kW 40kW 40kW

I.5Subject to technical changes

Mod

ular

dev

ices

U R R

M

L1 U

V

M

L2

Single phase Three phase

example:function of a heating installation 200 days/annum, 100 operations per day (1 opening + 1 closing = 2 operations) mechanical life = 10 yearstotal number of operations: 200 x 100 x 10 = 200,000 in that case select an ES 240 to control a load of 4.4 kW (single phase 230V)

Motors (AC3)Single phase 230V Three phase 400V

3 module (3&4 pole)

40A



Std range Noise free Std range Noise free Std range noise free

ES340


ET341

Voltage(a.c.)

ES440 ESN340B ES470 ES490

Load type ES480 ESN440B ES263 ESN263B ES463 ESN463B

AC3/AC7b 230300 000 - - - - - -

150 000 3.5kW 3.7kW 5kW 5kW 5kW 5kW

AC3/AC7b 400300 000 - - - - - -

150 000 10kW 11kW 5kW 5kW 15kW 15kW

Maximum load in kW (AC3/AC7b-eg motors)

1module20A

2 module20A


Standard range Noise free Std range Noise free Std range Noise free

Load type

Voltage (a.c.)


ES110 ES110A

ES210 ES239 ES320 ESN320B

ES220 ES220A ES420 ESN420B

ET221 ES224 ES420A ESN430B

ES224A ES230 ESN220B ES450 ESN444B ES240 ESN240B

AC3/AC7b 230300 000 1.4kW 1.3kW 1.4kW 1.4kW - -

150 000 1.4kW 1.3kW 1.4kW 1.4kW 3.5kW 3.7kW

AC3/AC7b 400500 000 - - 4kW 4kW - -

150 000 - - 4kW 4kW 3.5kW 3.7kW

I.6 Subject to technical changes

Choice of contactors

Contactor Selection (lighting)

The table below indicates the number of lamps (or dual fi ttings) that can be connected to each pole of the contactor on 230V 50hz curcuits.

1-module 2-module 3-module 3-module

Type Lamp power

Maximum capacitor value per fi tting

25A / 20A 25A 40A 63A

Standard Esxxx

Noise free ESNxxxB

Standard Esxxx

Noise free ESNxxxB

Standard Esxxx

Noise free ESNxxxB

Standard Esxxx

Noise free ESNxxxB

Incandescent lamps

Tungsten & halogen lamps

40W 50 50 50 50 125 100 175 125

60W 33 33 33 33 83 65 116 85

75W 26 26 26 26 66 53 93 66

100W 20 20 20 20 50 40 70 50

150W 13 13 13 13 33 26 46 33

200W 10 10 10 10 25 20 35 25

300W 6 6 6 6 16 13 23 16

500W 4 3 4 3 10 8 14 10

1000W 2 1 2 1 5 4 7 5

Fluorescent tubes

Energy saving lamp Compact Fluoro lamp

11W 90 67 90 67 125 93 180 135

15W 66 49 66 49 92 69 133 99

20W 50 37 50 37 69 51 100 75

23W 43 32 43 32 60 45 86 64

Single - non compensated

18W 30 22 30 24 85 90 120 140

Single -parallel compensation

18W 4.5 μF 18 7 18 8 45 48 60 73

36W 4.5 μF 15 7 15 8 40 48 55 73

58W 7 μF 13 4 13 5 30 31 40 47

Double - parallel compensation (number of double fi ttings)

2 x 18W 4.5 μF 18 6 18 8 44 48 60 72

2 x 36W 10 μF 14 6 14 8 40 48 54 72

2 x 58W 18 μF 10 4 10 4 30 30 40 46

Single - electronic ballast

18W 35 25 35 35 66 100 103 140

36W 30 15 30 20 56 52 85 75

58W 17 12 17 19 31 50 47 72

Double - electronic ballast (number of double fi ttings)

2 x 18W 17 12 17 17 33 50 51 70

2 x 36W 15 7 15 10 28 26 42 38

2 x 58W 8 7 8 9 15 25 23 36

Discharge lamps

Low pressure sodium -vapour lamps (compensated)

35W 20 μF 5 1 5 1 10 11 15 11

55W 20 μF 5 1 5 1 10 11 15 11

90W 30 μF 4 1 4 1 8 8 11 8

135W 40 μF 2 - 2 - 5 5 7 5

180W 45 μF 2 - 2 - 4 4 6 4

High pressure sodium -vapour lamps (compensated)

50W 8 μF 8 6 8 6 25 18 35 26

70W 12 μF 6 4 6 4 18 13 25 19

110W 12 μF 5 4 5 4 15 11 18 13

150W 20 μF 4 1 4 1 13 11 15 16

250W 36 μF 2 - 2 1 8 6 10 10

400W 45 μF 2 - 2 - 6 4 8 6

1000W 100 μF 1 - 1 - 4 2 5 3

Metal Halide -vapour lamp (compensated)

35W 6 μF 8 5 8 6 31 36 42 50

70W 12 μF 6 2 6 3 15 18 20 25

150W 20 μF 3 1 3 1 9 11 16 15

250W 32 μF 2 0 2 1 5 6 7 9

400W 45 μF 1 0 1 1 3 6 5 8

I.7

Mod

ular

dev

ices



EPN510*

��

��

EPN 050*

45

68

44

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Latching relays

descriptionfor control of lighting circuits in private buildings, small industry buildings and administration buildings. Latching relays operate when pulsed by a signal voltage. The pulse can be provided via a push button or switch. The first impulse sets the relay into its set (opposite)

state, the next impulse returns it to its reset (original) state.connection capacity- 10 rigid cables- 6 flexible cables

description type coilVac50/60Hz

coilVdc

powercircuitAC1

width in 17.5mm

cat.ref.

latching

relays

1NO 230 110 16A-250V 1 EPN510*

2NO 230 110 16A-250V 1 EPN520*

24 12 16A-250V 1 EPN524*

1NC + 1NO 230 110 16A-250V 1 EPN515*

Auxiliaries for centralised control. The EPN 050 allows the centralised control of several light sources which can be turned on or off simultaneously the separate switching by pushing the pushbuttons, which are connected with the latching

relay, remains possible.

The EPN 052 allows a generic central control of individual central on/off EPN 050

Auxiliary contact A remote signalling can be realised with the auxiliary contact EPN 051.

Auxiliary for control by maintained contact.

When control devices with permanent impulse are externally driven, e.g. time switches or limit switches, an impulse control directly to the latching relay’s coil is possible with the auxiliary contact EPN 053.

Connection latching relay + auxiliary

Several auxiliaries can be combined with the latching relay.

Connection capacity 10I rigid cables 6I flexible cables


cat.ref.

auxiliary for centralisedcontrol

24 to 230V AC 0.5 EPN050*

Latching relays auxiliaries

I.8

EN145

A1 1

A2 2 4

��

��

��

��

��

��

EPN051*

EPN052*

EPN053*

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Latching relays auxiliaries cont..

descriptionto interface between low voltage and extra low voltage circuits to ensure galvanic insulation between LV and ELV to 4kVapplicationinterface between fire alarm,

burglar alarm and other ELV systems and main distribution circuits

connection capacity- 6mm2 rigid cables- 4mm2 flexible cables


cat.ref.

interface relaysELV/LV 1 way

output: 1 changeover

coil voltage: 10 to 26V AC/DC

contactmax. 5A 230V~ -min. 10mA - 12V DC

1 EN145


cat.ref.

auxiliary contact 2A 250 V AC 0.5 EPN051*

auxiliary for multilevelled centralisedcontrol

24 to 230V AC 0.5 EPN052*

auxiliary for controlby maintained contact

24 to 230V AC 0.5 EPN053*

Interface relays

I.9

Mod

ular

dev

ices

EZN001

EZN006

Cd

S

T

Control

Output

Cd

S

T

Control

Output

Cd

S

T

Control

Output

��

�

�

Control

Output

��

�

�

Control

Output

Delay timers

DescriptionTo provide all types ofautomatic control i.e. lighting, ventilation, watering, machine preheating, automatic door and visual audible indication, cycle control etc.

ApplicationsFor timing and automation in domestic and commercial premises. The input signal

can be via various switching devices (push button, latching switch, time clock etc.) and the timed output used to control theapplication.

Technical dataVoltage range : 12 & 24 to 48V DC12 & 24 to 230V ACAdjustable: time delay from

0.1s to 10 hours.LED indicatorcomplies with EN 60669-2-1

Connection capacity :6mm2 max flexible 1.5 - 10mm2 rigid


cat.ref.

Delay ON 1 c/o contact8A / 230V~ AC1 time delay T : 0.1s to 10hr

1 EZN001

1 Delay OFF 1 c/o contact8A / 230V~ AC1time delay T : 0.1s to 10hr

1 EZN002

Adjustable time ON 1 c/o contact8A / 230V~ AC1time delay T : 0.1s to 10hr

1 EZN003

Timer 1 c/o contact8A / 230V~ AC1time delay T : 0.1s to 10hr

1 EZN004

Symmetrical flasher 1 c/o contact8A / 230V~ AC1time delay T : 0.1s to 10hr

1 EZN005

Multifunction6 individual functionsincluding :D - delay onC - delay offE - adjustable time ONB - adjustable time OFFA - timerF - symmetrical flasher - ON - OFF

1 c/o contact8A / 230V~ AC1time delay T : 0.1s to 10hr

1 EZN006

I.10

EMN001

EM002

FU

TU

RE

RE

LEA

SE

Time lag switches


cat.ref.

Multifunction staircase time lag switch

- basic staircase time lag switch- pre-warning mode- double delay mode30s to 10min or 1hr- double delay with pre-warning mode

supply voltage : 230V 50/60Hz

16A - 250V AC1

2300W incandescenthalogen and fluoro

1 EMN005

Add-on blockpre-warning device

voltage rating : 230V 50/60Hzrestart facilitypre-warning to switch-off bydimming the lights to 50% level24s prior to switch offoutput power :1000W incandescent1000W halogennot suitable for use with discharge lamp

2 EM002

Standard staircasetime lag switch

adjustable time delay setting: 30s until 10minretrigger

supply voltage : 230V 50/60Hz

16A - 250V AC1

2300W incandescenthalogen and fluoro

1 EMN001

DescriptionTime lag switches provide control of lighting circuits with automatic switch-off after a pre-set time. (e.g. for staircase, corridors lighting).

Compact design with a 2 position switch permanent/timed lighting implementation facility.

EMN005 incorporate a pre-warning of switch OFF to improve the safety for users and a double delay function:30s to 10min or 1hr by pressing the push-button for more than 3s.Complies with EN 60669-2-1

FU

TU

RE

RE

LEA

SE

I.11

Mod

ular

dev

ices


EH210*

EH010

EH111

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Analogue time switches modular

DescriptionElectromechanical time switches 1 channel for daily or weekly programming.To control lighting, heating, household appliances, shop windows etc.To improve comfort and save energy.

ApplicationsDomestic and commercialpremises.DIN rail mounting

Complies with EN60730

Technical data- programming by captive segments.- manual override : On 1 module devices : - automatic - permanent ON On 2 and 3 module devices : - automatic - permanent ON - permanent OFF

Minimum switching time:- 15 min for daily versions- 2 hours for weekly versions- 15 min and 2 hours on the daily+weekly version

Connection capacity :1 to 4mm2

description characteristic width in I17.5mm

cat.ref.

Analogue time switches modular compact

230 V50 Hz

1 NO16 A - 250 V AC1

24hrwithout battery reserve

24hrreserve: 200hrs

1

1

EH010

EH011

Analogue time switches standard modular version

230 V50 Hz

1 NO changeover16 A - 250 V AC1



24hrreserve: 200hrs

24hrreserve: 200hrs

7dayreserve: 200hrs

7dayreserve: 200hrs

3

2

3

2

3

2

EH110

EH210*

EH111

EH211*

EH171

EH271*

I.12

EH771

EH711

Analogue time switches 72 x 72mm

descriptionfor daily or weekly programming. 1 channel time switches for the control of lighting, heating, household appliances, shop windows etc. To improve comfort and save money.applicationsdomestic, commercial premises

technical data- suitable for surface, flush

or DIN rail mounting- programming by captive

segments- manual override with

automatic return toprogrammed

- operating reserve: 200hrsafter connection for120hrs

- output: voltage free

changeover contact16A/250V

daily version:programming in steps of 10 minutes. Minimum time between 2 switching intervals : 20min

weekly version:programming in steps of one hour.- minimum time between 2

switching intervals : 2hrs- switching accuracy : 10min


1 channel daily cycle supply : 230V 50/60Hz

without battery reserve 24 hr dial Manual override

EH710

with battery reserve 24 hr dial Manual override

EH711

1 channel weekly cycle

supply : 230V 50/60Hz

with battery reserve 7 day dial Manual override

EH771


Pow

er in

terf

ace

Pro

gram

min

g

Mo

du

lew

idth

op

erat

ing

cy

cle

pro

gra

m

step

sco

nta

cts/

chan

nel

sd

isp

lay

pro

gra

m

key

astr

op

uls

ecy

cle

day

-lig

ht

savi

ng

exte

rnal

in

pu

to

verr

ides

keyb

oar

d

lock

ing

ho

liday

ran

do

mh

ou

r co

un

ter

EG

010

1

1

EG

071

1

1

EG

103E

2

1

EG

203E

2

2

EG

493E

4

4

EG

293E

4

2

EG

403E

4

4

EE

180

2

1

EE

181

2

2

5656300

300

300

565620

6

Digital time switch - selection chart

I.14

EG071

EG403E

EG203E

Digital time switches


cat.ref

1 channel daily cycle

5 adjustable pre-recordedprograms : 6 commutations max per day (3 ON and 3 OFF)230V 50/60 Hz

1 EG010


capacity : 20 program steps230V 50/60 Hz

1 EG071


capacity: 56 program steps version delivered with key EG005

2 EG103E

2 channels weekly cycle

capacity: 56 program steps version delivered with key EG005

2 EG203E

4 channels weekly time switch

voltage rating: 230V~ 50/60 Hzoutput: 3 changeover contacts10A - 250V~ AC1 1 NO1NO contact : 10A - 250V ~ AC1 delivered with programming key

4 EG403E

2 channels yearly time switch

voltage rating: 230V~ 50/60 Hzoutput: 2 changeover contacts10A - 250V~ AC1

4 EG293B

4 channels yearly time switch

voltage rating: 230V~ 50/60 Hzoutput: 3 changeover contacts10A - 250V~ AC11NO contact: 10A - 250V ~ AC1 delivered with programming key

4 EG493E

Programming key

for EG403E, EG493E, EG293B EG007

Programming key

for EG103E / EG203E EG005

Keypad locking key

for EG103E / EG203E EG004

Interface and software

for computer PC with software on CD and USB

EG003U

descriptionfor the control of lighting,school bells, pumps,etc.applicationsdomestic and commercial premises, schools, irrigation.1 module time switch- 1 channel cycle- manual over ride- operating reserve 3 years- 5 pre-recorded (adjustable)

programs (EG010)- 20 program steps (EG070)

2 module time switch- ability to download

program ontomultiple time switchesvia EG005

- keypad locking key EG004- permanent & temporary

over ride & pulse- operating reserve 5 years- 56 program steps- software programming

option- bar graph for quick

program overview- holiday mode- back lit display- automatic summer/

winter adjustment

4 module time switch- ability to download

program onto multipletime switches via EG003U

- impulse control- manual over ride & pulse- programmable without

mains supply- operating reserve 5 years

300 program steps- automatic summer/ winter adjustment

I.15

Mod

ular

dev

ices

EE101*

EE110*

EE702

EE180*

EG005

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Light sensitive switchesAstronomical time switches

Light sensitive switchesA photo-electric cell measures the light level and in conjuction with the relay provides ON / OFF control of a circuit.This device controls lighting circuits in relation to ambient light, based on user settings.Front cover sealabilityApplicationsStreet lighting, display lighting, illuminated signes etc.Protected cable clamps

capacity :rigid : 1.5 to 10mm2

flexible : 1 to 6mm2

LED shows status of changeover contact.4 position override switch allowing:- auto: normal operating mode- on: permanently switched on- off: permanently switched off- test: setting mode for easy adjustmentoutput : 1 changeover AC1contact 16A AC1 230V 8A AC1 (EE702)Maximum distance : 50m between photocell & controller

Must be used in conjunction with a suitable rated contactor Astronomical time switches.The hager range is composed of two Astronomical time switches EE180/EE181The range offers the following features :- Programming of the lighting

control- Automatic change of winter /

summer time- Astro program and expert

program with individual Astro

program steps- Programming for day

or group of days (same concept as our existing clocks with key)

- Anticipation ON- Maintained ON- Temporary overrides- Programming of holidays

period- Programming via the PC

software and the associated interface (EG003)

- Weekly program

description characteristics with in I17.5mm

cat.ref.

Light sensitive switch

delivered with :a separate surface photo electric cell EE003 (EE100)a separate flush photo electric cell EE002 (EE101)

Voltage rating :230 V AC +10-15 % 50 Hzoutput : 1 changeover16 A - 250 V AC 1

sensitivity : 2 ranges- 5 to 100 lux- 50 to 2000 lux

3

3

EE100*

EE101*

Compact light switch

IP 55 / integrated cell

normally open contact16A AC12-1000W incandescentswitching delay either fixed or adjustable (1s - 120s)

- EE702

Programmable light sensitive switch with surface cell

daily cycleelectromech. switch

weekly cycleelectronical programfree setting

5

3

EE110*

EE171*

Astronomical time switch(weekly cycle)

delivered with key EG005.

1 channel 230V AC 50 Hzchangeover contact16A AC1operating reserve lithium battery 5 years

2 channels 230V AC 50 Hz2 changeover contacts16A AC1operating reserve lithium battery 5 years

EE180*

EE181*


I.16

EE200*

EE202*

EE002 EE003

FU

TU

RE

RE

LEA

SE

FU

TU

RE

RE

LEA

SE

Light sensitive switches2 channel

Light sensitive switch, 2 channel up to 20000 Lux

By controlling exterior and interior light sources, the light sensitive switches enable great energy savings.Providing consistent & controlled lighting across all areas while making the most of

the natural light source.Examples of use: offices, classrooms, storage rooms, production areas...

Characteristics“Auto-Test”switch:- “Auto” position, channel switching is 30s,- For each channel:

- luminance threshold setting- state display- switch: manual override, off-switch, sensitivity range selection.

Light sensitive switchEE2022 more inputs for various automation devices controlling

(time switch, presence detector, push button...).

These products can be linked together to increase the number of levels and outputs controlled by one same cell.


cat.ref.

Two channels light sensitive switch

the output is switched on/off according to the pre-defined lux level

230 V 50/60Hz2 contacts NO 16 A 250 VAC AC1- delivered without cell,can be associate with:- flush cell EE002- or surface cell EE003for each channel :- threshold setting- state indication LED - 4 positions selection switch : - On - Off - 2... 200 Lux - 200 ...20 000 Lux.EE200 delivered with surface cell EE003

4

4

EE200*

EE201*

Two channels light sensitive switch for cascading

As well as EE200, it integrates 2 inputs for 2 operating modes. The selected mode always applies to the both outputs.

same characteristics than EE200 above + additional automation.input E1 : 230 V, used to connect a contact like: switch, timer... operating mode selector : - mode 1 : automatic- mode 2 : half automatic, allows time delayed function (adjustable time: 1 min., 5 min., 10 min, 30 min., 45 min., 1 h 30, 2 h).delivered without cell,can be associated with :- flush cell EE002- or surface cell EE003

EE202 delivered with surface cell EE003

4

4

EE202*

EE203*

Cell flush cellIP54 for EE100, 101, 110 & 170

surface cellIP54 for EE100, 101, 110 & 170

EE002

EE003



Pow

er in

terf

ace

Pro

gram

min

g

wid

th in

1

:E

H0

10

, E

H0

11

EH

71

0,

EH

71

1,

EH

77

1

wid

th in

3 :

EH

01

0,E

H1

11

, E

H1

71

wid

th in

2

:E

H2

10

, E

H2

71

Analogue time switches selection chart

Technic

al

chara

cte

rist

ics

EH

010

EH

011

EH

110

EH

111

EH

171

EH

210

EH

211

EH

271

EH

710

EH

711

EH

771

Wid

th in

z

17.5

mm

11

33

32

22

surfa

ce m

ount

ed (7

2mm

x 7

2mm

)

Vol

tage

230V

230V

230V

230V

230V

230V

230V

230V

230V

230V

230V

Ope

ratin

g cy

cle

24 h

rs.

24 h

rs.

24 h

rs.

24 h

rs.

7 da

ys24

hrs

.24

hrs

.7

days

24 h

rs.

24 h

rs.

7 da

ys

Min

imum

sw

itchi

ng15

min

15 m

in15

min

15 m

in2

hrs.

30 m

in30

min

3 hr

s 30

20 m

in20

min

2 hr

s.

Sup

ply

failu

re

rese

rve

-20

0 hr

s.-

200

hrs.

200

hrs.

-20

0 hr

s.20

0 hr

s.-

200

hrs.

200

hrs.

Man

ual

over

ride

auto

/on

auto

/on

auto

/on

/off

auto

/on

/off

auto

/on

/off

auto

/on

/off

auto

/on

/off

auto

/on

/off

on/o

ffon

/off

on/o

ff

I.18I.18

Insulated busbars and connectors make it quick and easy to connect to devices mounted in loadcentres and panelboards.

Energy distributionConnection

Con

nect

ion

J.1

Insulated busbars and connectors J.1

J.2

KM03A

KB380A

KM035

Insulated busbars and connectors

descriptiona range of connection devices to simplify installation of modular devices such as MCB’s, RCD’s etc...


catref.

insulated busbars - fork type

1 phase 80A 12 KDN180A

1 phase 80A 56 KDN180B

1 phase 80A 18 KD180G





insulated busbars - tongue type

1 phase 80A 24 KB190C

2 phase 80A 12 KB280A

2 phase 80A 18 KB280G

3 phase 80A 12 KB380A

3 phase 80A 18 KB380G

insulating busbar ends -

KDN2XX/KDN3XX KZN023

cable connectors - tongue type

connection from top of cables : 25mm2

KF81A

connection from top of cables : 2 x 16 mm2

KF82A

connection from side for cables : 25mm2

KF83A

cable connectors - fork type connection from side for cables : 25mm2

KF84A

RCD neutral links 3 hole for fitting to RCD’s

KM03A

35mm2 cable adaptor to suit Golf enclosures

KM035

eco-ficient®

energy saving solutions

J.3


Cable management

Saving energy - look global, act local

The energy-saving systems, products and services we offer all help reduce energy and the consumption of natural resources. All Hager products products comply with the European RoHS and WEEE directives and environment management systems such as ISO 14001.Whenever Hager is active, we contribute to measures for ecological efficiency and environmental protection for a safe, clean and healthy environment for consumers, users of our products, employees and the public at large.

www.hagerbr.com.au/eco-ficient

hager B&R - terms and conditions of saleACN 061 639 576 ABN 84 061 639 576

1. GENERALThese conditions of sale apply to any sale of items or equipment of the

Company or, where a quotation is made, they shall form part of that

quotation. No variation or cancellation of any of these Conditions of

Sale shall be binding on the Company unless agreed by a responsible

officer of the Company in writing. No agent or representative has

the authority to waive or alter these terms and conditions.

2. PRECEDENCEIn the event of conflict between these conditions and those

which may be included in, or implied by, any document forming

part of any enquiry, specification, order or contract then these

conditions shall prevail except insofar as they are expressly

varied by the Company in writing. If any condition is contrary to

or excluded by law these conditions shall be modified but only to

the extent of excluding that part of the conditions affected.

3. ACCEPTANCEA quotation is not to be construed as an offer or obligation to sell and

the Company reserves the right to accept or reject any orders received.

4. TERMS OF PAYMENTS(a) The purchaser has to pay for goods within 30 days of purchase.

(b) The purchaser must also pay for goods and services tax,

and other duties, taxes or government charges.

5. SURCHARGEA surcharge of $2.50 will be applied to all invoices with a

value of $20.00 or any amount less than $20.00.

6. PRICES(a) All prices are subject to change without notice and orders

are accepted by the Company on the condition that they

will be invoiced at the prices ruling at the date of despatch.

All prices are strictly net unless otherwise stated.

(b) Every endeavour will be made to give 30 days notice of any increase.

(c) All prices shown in published catalogues or price lists are

recommended selling prices only & there is no obligation

on the part of any reseller to maintain such prices.

(d) A quotation includes only such goods as are specified therein.

We reserve the right to cancel any sale where goods offered ex

stock have been previously sold or otherwise committed.

7. FREIGHT(a) Unless otherwise stated prices include delivery to purchaser’s

stores within the metropolitan areas of Australian capital cities or

major centres by normal surface means, and packing suitable

for such transport for orders of value of $250 or more.

(b) For orders less than $250 the purchaser shall nominate the

preferred freight method and be responsible for all freight charges.

(c) Goods dispatched to other destinations are sold on a Free on

Transport (FOT) basis. Where the purchaser requires freight

to be prepaid all expenses will be to his account at cost.

(d) Freight cost on return of any goods which are not in accordance

with Purchaser’s order will only be paid by the Company

if returned by the Company’s nominated transport.

8. TAXThe prices quoted do not include sales or goods

and services tax unless specifically stated.

9. DELIVERYThe delivery period quoted commences from the date the Company

receives sufficient information to proceed with supply or from the date the

Company receives the Purchaser’s written order, whichever is the later

date. Quoted delivery dates are subject to confirmation when placing

the order. Unless otherwise agreed by the Company in writing, the

Company shall not in any event be liable to the Purchaser for any delay

in the delivery or any non-delivery of the goods or any part of them.

10. CREDITSGoods will not be accepted for credit without prior approval of

personnel at the Company’s nearest Sales Office. All goods approved

for return shall be returned freight pre-paid and subject to a 15%

restocking charge. Non-Standard products will not be credited.

11. CANCELLATION OR VARIATIONAn order may, at the Company’s option, be terminated in the event

of insolvency of the Purchaser or of execution being levied against

any of the goods of the Purchaser or of the Purchaser being placed

in liquidation, whether voluntarily or otherwise or of a mortgagee

entering into possession of any assets of the Purchaser. An order

may be varied only if such variation is accepted by the Company

in writing. A variation or cancellation by the Purchaser is subject to

agreement by the Company and in any event is subject to the Company

being indemnified by the Purchaser against any loss or damage.

12. PURCHASER’S SPECIFICATIONSThe Company shall not be deemed to have agreed to comply with

any specifications and drawings referred to in any order unless such

specifications and drawings have been produced to the Company

prior to the delivery of goods and are signed by the Company.

13. VALIDITYUnless otherwise stated quotations are open for acceptance for

a period of 30 days from the date of quotation and thereafter are

subject to confirmation before acceptance. If on acceptance of

a quotation the delivery date required exceeds a period of sixty

(60) clear days then the company may amend the quotation.

Furthermore in the event of alterations to design or specifications

all quotations given are subject to withdrawal or variation at any

time prior to acceptance. Unless confirmed in writing by the

Company any verbal agreement to vary undertakings assurances

or understandings relevant to this quotation shall not be binding.

14. INSPECTIONThe Purchaser shall inspect the products delivered on their

arrival. If the Purchaser considers that the products are not

in accordance with the contract written notice must be given

to the Company within seven (7) clear days and if no notice

is received by the Company within that time the products are

deemed to be in all respects in accordance with the contract.

hager B&R - terms and conditions of saleACN 061 639 576 ABN 84 061 639 576

15. PACKINGUnless stated otherwise in the quotation the price quoted includes

packing in accordance with the Company’s standard practice. Any

other packing requested by the Purchaser or deemed necessary

by the Company will be charged in addition to the price quoted.

16. DAMAGE OR LOSS IN TRANSITWhere carriage is the responsibility of the Company, the Company

will repair or may replace free of charge contract goods lost or

damaged in transit to the contractual point of delivery provided

written notice of such loss or damage is given to the Company

within three days of delivery or expected delivery, or within such

times as will enable that Company to comply with the carrier’s

conditions of carriage affecting loss or damage in transit.

17. RISKThe goods shall be at the risk of the Purchaser from the time

of their delivery to the Purchaser’s store (where carriage is

the responsibility of the Company) or otherwise from the

time of their delivery to the Purchaser or its carrier.

18. PRODUCT DESIGNThe Company engages in a policy of continuous development and

improvement of its products. Therefore the Company reserves

the right to alter the design and/or specifications of any product

or equipment without notice and without incurring liability.

19. WARRANTYAll goods which are the Company’s own are guaranteed against faulty

workmanship, materials or design, for a period of twenty-four (24) months

from the date of despatch, after which all liability on the part of the

Company ceases. The guarantee does not apply in the following cases: -

- defect arising from materials supplied by the Purchaser

or from a design requested by the Purchaser

- replacements or repairs resulting from normal wear of

units and machinery, corrosive atmosphere, damage

or injury caused by lack of care, insufficient inspection

or maintenance, or improper use of the goods

- failure attributable to fortuitous circumstances or “force majeure”.

The guarantee consists of repairing, modifying or replacing the parts or

units recognised as defective within the shortest time at the Company’s

expense, inclusive of parts and labour, but exclusive of transport and/or

travelling expense. Subject to the above, the Company’s liability and that

of its resellers is wholly limited to the original cost of the product sold.

Any unauthorised repairs or alterations to the equipment shall

invalidate this warranty. In the case of goods not of the manufacture

of the Company or its principals, the Company undertakes that it

will, if requested in writing by the Purchaser, make all reasonable

endeavours in assisting the Purchaser to obtain from the manufacturer

the benefit of any guarantee or warranty which the manufacturer

may have expressly given as to the quality or fitness for any purpose

of the goods, except as may otherwise be provided for by law.

The fulfilment of this undertaking shall constitute the Company’s sole

liability in respect of any faulty goods not of the manufacture of the

Company or its principals. Neither the reseller nor the Company shall

be liable for any injury, damages, expense, or loss of profit, direct or

consequential, arising out of the use or installation of products supplied

by the Company all of which are supplied at the sole risk of the user.

This warranty is in addition to any statutory warranty which a Purchaser

cannot waive but all other warranties are waived by the Purchaser.

20. DEFAULT OF PURCHASERIf the Purchaser defaults in the due observance or performance of

any or all of his obligations under any contract arising out of this offer

or being a company takes or shall have taken against it any action

for the winding up of the Company or the placing of the Company

under official management or receivership, or if a mortgagee of the

Purchaser takes possession of any of the Purchaser’s assets or being

an individual the Purchaser petitions for his bankruptcy or seeks to

assign his estate for the benefit of his creditors then the Company

without prejudice to any other rights or remedies open to it may:-

(a) determine the contract and or suspend manufacture or delivery,

installation, commissioning or testing of any goods then outstanding

(b) retain any security given or money paid by the Purchaser

or available through enforcement of guarantee or security

bonds lodged and apply this against the loss and damages

incurred by it in the performance of the contract

(c) take such steps as it may deem necessary to mitigate

the damage suffered including the putting to use, hiring

out, sale or disposal of any goods supplied, or to be

supplied under the contract and in its possession

(d) exercise its rights under condition 21.

21. TITLE TO GOODSProperty in the goods does not pass to the purchaser until they,

and all other goods supplied by the company to the purchaser, have

been paid for in full. Until property passes to the purchaser:-

(a) The purchaser must store the goods so that they

are clearly identified as the company’s goods

(b) The purchaser holds the goods solely as Bailee for the company

(c) The purchaser may resell the goods as long as the purchaser

holds any money received in trust for the company; and

(d) The company may enter the purchaser’s

premises and repossess the goods.

Hager B&R Pty LtdACN 061 639 576Unit 14-17 Riverside Centre148 James Ruse DriveParramatta NSW 2150Ph (02) 9762 0200Fx (02) 9687 0022www.hagerbr.com.au

State Offices

New South WalesHager B&R Pty LtdUnit 14-17 Riverside Centre148 James Ruse DriveParramatta NSW 2150Ph (02) 9762 0200Fx (02) 9687 0011

New South Wales(Newcastle)Ross Joice Agencies Pty Ltd109-111 Broadmeadow RoadBroadmeadow NSW 2292Ph (02) 4961 4433Fx (02) 4961 2498

VictoriaHager B&R Pty Ltd50-52 Sunmore CloseHeatherton VIC 3202Ph (03) 8588 8400Fx (03) 8588 8401

Western AustraliaHager B&R Pty Ltd20 Millrose DriveMalaga WA 6090Ph (08) 9248 9744Fx (08) 9248 2033

Queensland(Brisbane)Hager B&R Pty LtdBrisbane South Industrial Park51 Stradbroke StreetHeathwood QLD 4110Ph (07) 3714 1111Fx (07) 3714 1091

Queensland(Townsville)Hager B&R Pty Ltd25 Dalrymple RoadGarbutt QLD 4814Ph (07) 4775 6255Fx (07) 4779 6736

South AustraliaB&R Enclosures Pty Ltd505 Grand Junction RoadWingfield SA 5013Ph (08) 8243 1166Fx (08) 8268 3675

Northern TerritoryJewell Distributors Pty LtdCnr Hidden Valley& Beaton RoadsBerrimah NT 0828PO Box 39362Winnellie NT 0821Ph (08) 8947 0870Fx (08) 8947 0764

Tasmania(Launceston)W.P. Martin Pty Ltd85 Elizabeth StreetLaunceston TAS 7250Ph (03) 6331 5545Fx (03) 6331 4256

Documents

EnergyDistribution