48
PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE August 2020

ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 1IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ENERGY amp COMMS SYSTEMSSpecification and installation guide

PE PRESSURE SYSTEMSSPECIFICATION AND INSTALLATION GUIDE

August 2020

WWWIPLEXCONZ 2IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

The Iplexreg vision is to be the leading manufacturer and supplier of plastic building materials in New Zealand

Kawerau Falls Bridge Queenstown - Image courtesy of Waka Kotahi NZ Transport Agency

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 1 - IPLEX PE 80 Page number

Iplex Bluelinereg DN20 ndash DN63 PE 80 Metric Pressure Pipe coloured blue (CX jacket) 9

Iplex Bluelineregbull Manufactured in accordance with

ASNZS 4130bull PN125 pressure ratingbull Available in coils of 25m 50m and

100m lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

Iplex Blacklinetrade HPbull Manufactured in accordance with

ASNZS 4130bull Available in a PN20 or PN25 pressure

ratingbull Available in coils of 50m or 100m

lengthsbull Compatible with Blacklinetrade HP ductile

iron mechanical fittings

Iplex Poliplexregbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull Ability to offer PE 100 high stress crack resistant (HSCR) resin

SECTION 2 - IPLEX PE 100 Page number

Iplex Blacklinetrade DN25 ndash DN110 PE 100 Metric Pressure Pipe coloured black with blue multistripe

13

Iplex Blacklinetrade HP DN63 ndash DN110 PE 100 Metric Pressure Pipe coloured black 15

Iplex Poliplexreg DN75 ndash DN2000 PE 100 Metric Pressure Pipe 17

Iplex Blacklinetrade

bull Manufactured in accordance with ASNZS 4130

bull PN16 pressure ratingbull Available in coils of 25m 50 and 100m

lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

CONTENTS

WWWIPLEXCONZ 4IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex Mobile Extrusionbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull The Iplex Mobile Extrusion plant has the ability to be moved on site

SECTION 4 - IPLEX MOBILE EXTRUSION Page number

Iplex Mobile Extrusion Iplex Mobile plant PE 100 moved to project specific sites 37

Iplex Plasson Line 7 Fittingsbull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Plasson Series 1 Fittingsbull Push-fit joint stylebull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Blacklinetrade HP Ductile Iron Fittingsbull Compatible with Iplex Blacklinetrade HP

PN20 and PN25bull Adaptable by either flange or threaded

joints to other types of pipes pumps and valves

SECTION 3 - IPLEX PE FITTINGS Page number

Iplex Plasson Line 7 Fittings Iplex Plasson Line 7 Fittings 20mm ndash 160mm PE Plasson Line 7 compression fittings

23

Iplex Plasson Series 1 Fittings 20mm ndash 63mm PE Plasson Series 1 Compression Fittings 31

Iplex Blacklinetrade HP Ductile IronFittings 63mm ndash 100mm Ductile Iron mechanical fittings 34

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 2: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 2IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

The Iplexreg vision is to be the leading manufacturer and supplier of plastic building materials in New Zealand

Kawerau Falls Bridge Queenstown - Image courtesy of Waka Kotahi NZ Transport Agency

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 1 - IPLEX PE 80 Page number

Iplex Bluelinereg DN20 ndash DN63 PE 80 Metric Pressure Pipe coloured blue (CX jacket) 9

Iplex Bluelineregbull Manufactured in accordance with

ASNZS 4130bull PN125 pressure ratingbull Available in coils of 25m 50m and

100m lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

Iplex Blacklinetrade HPbull Manufactured in accordance with

ASNZS 4130bull Available in a PN20 or PN25 pressure

ratingbull Available in coils of 50m or 100m

lengthsbull Compatible with Blacklinetrade HP ductile

iron mechanical fittings

Iplex Poliplexregbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull Ability to offer PE 100 high stress crack resistant (HSCR) resin

SECTION 2 - IPLEX PE 100 Page number

Iplex Blacklinetrade DN25 ndash DN110 PE 100 Metric Pressure Pipe coloured black with blue multistripe

13

Iplex Blacklinetrade HP DN63 ndash DN110 PE 100 Metric Pressure Pipe coloured black 15

Iplex Poliplexreg DN75 ndash DN2000 PE 100 Metric Pressure Pipe 17

Iplex Blacklinetrade

bull Manufactured in accordance with ASNZS 4130

bull PN16 pressure ratingbull Available in coils of 25m 50 and 100m

lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

CONTENTS

WWWIPLEXCONZ 4IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex Mobile Extrusionbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull The Iplex Mobile Extrusion plant has the ability to be moved on site

SECTION 4 - IPLEX MOBILE EXTRUSION Page number

Iplex Mobile Extrusion Iplex Mobile plant PE 100 moved to project specific sites 37

Iplex Plasson Line 7 Fittingsbull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Plasson Series 1 Fittingsbull Push-fit joint stylebull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Blacklinetrade HP Ductile Iron Fittingsbull Compatible with Iplex Blacklinetrade HP

PN20 and PN25bull Adaptable by either flange or threaded

joints to other types of pipes pumps and valves

SECTION 3 - IPLEX PE FITTINGS Page number

Iplex Plasson Line 7 Fittings Iplex Plasson Line 7 Fittings 20mm ndash 160mm PE Plasson Line 7 compression fittings

23

Iplex Plasson Series 1 Fittings 20mm ndash 63mm PE Plasson Series 1 Compression Fittings 31

Iplex Blacklinetrade HP Ductile IronFittings 63mm ndash 100mm Ductile Iron mechanical fittings 34

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 3: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

The Iplexreg vision is to be the leading manufacturer and supplier of plastic building materials in New Zealand

Kawerau Falls Bridge Queenstown - Image courtesy of Waka Kotahi NZ Transport Agency

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 1 - IPLEX PE 80 Page number

Iplex Bluelinereg DN20 ndash DN63 PE 80 Metric Pressure Pipe coloured blue (CX jacket) 9

Iplex Bluelineregbull Manufactured in accordance with

ASNZS 4130bull PN125 pressure ratingbull Available in coils of 25m 50m and

100m lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

Iplex Blacklinetrade HPbull Manufactured in accordance with

ASNZS 4130bull Available in a PN20 or PN25 pressure

ratingbull Available in coils of 50m or 100m

lengthsbull Compatible with Blacklinetrade HP ductile

iron mechanical fittings

Iplex Poliplexregbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull Ability to offer PE 100 high stress crack resistant (HSCR) resin

SECTION 2 - IPLEX PE 100 Page number

Iplex Blacklinetrade DN25 ndash DN110 PE 100 Metric Pressure Pipe coloured black with blue multistripe

13

Iplex Blacklinetrade HP DN63 ndash DN110 PE 100 Metric Pressure Pipe coloured black 15

Iplex Poliplexreg DN75 ndash DN2000 PE 100 Metric Pressure Pipe 17

Iplex Blacklinetrade

bull Manufactured in accordance with ASNZS 4130

bull PN16 pressure ratingbull Available in coils of 25m 50 and 100m

lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

CONTENTS

WWWIPLEXCONZ 4IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex Mobile Extrusionbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull The Iplex Mobile Extrusion plant has the ability to be moved on site

SECTION 4 - IPLEX MOBILE EXTRUSION Page number

Iplex Mobile Extrusion Iplex Mobile plant PE 100 moved to project specific sites 37

Iplex Plasson Line 7 Fittingsbull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Plasson Series 1 Fittingsbull Push-fit joint stylebull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Blacklinetrade HP Ductile Iron Fittingsbull Compatible with Iplex Blacklinetrade HP

PN20 and PN25bull Adaptable by either flange or threaded

joints to other types of pipes pumps and valves

SECTION 3 - IPLEX PE FITTINGS Page number

Iplex Plasson Line 7 Fittings Iplex Plasson Line 7 Fittings 20mm ndash 160mm PE Plasson Line 7 compression fittings

23

Iplex Plasson Series 1 Fittings 20mm ndash 63mm PE Plasson Series 1 Compression Fittings 31

Iplex Blacklinetrade HP Ductile IronFittings 63mm ndash 100mm Ductile Iron mechanical fittings 34

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 4: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 3IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 1 - IPLEX PE 80 Page number

Iplex Bluelinereg DN20 ndash DN63 PE 80 Metric Pressure Pipe coloured blue (CX jacket) 9

Iplex Bluelineregbull Manufactured in accordance with

ASNZS 4130bull PN125 pressure ratingbull Available in coils of 25m 50m and

100m lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

Iplex Blacklinetrade HPbull Manufactured in accordance with

ASNZS 4130bull Available in a PN20 or PN25 pressure

ratingbull Available in coils of 50m or 100m

lengthsbull Compatible with Blacklinetrade HP ductile

iron mechanical fittings

Iplex Poliplexregbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull Ability to offer PE 100 high stress crack resistant (HSCR) resin

SECTION 2 - IPLEX PE 100 Page number

Iplex Blacklinetrade DN25 ndash DN110 PE 100 Metric Pressure Pipe coloured black with blue multistripe

13

Iplex Blacklinetrade HP DN63 ndash DN110 PE 100 Metric Pressure Pipe coloured black 15

Iplex Poliplexreg DN75 ndash DN2000 PE 100 Metric Pressure Pipe 17

Iplex Blacklinetrade

bull Manufactured in accordance with ASNZS 4130

bull PN16 pressure ratingbull Available in coils of 25m 50 and 100m

lengthsbull Compatible with Plasson Line 7 or

Plasson Series One mechanical fittings

CONTENTS

WWWIPLEXCONZ 4IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex Mobile Extrusionbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull The Iplex Mobile Extrusion plant has the ability to be moved on site

SECTION 4 - IPLEX MOBILE EXTRUSION Page number

Iplex Mobile Extrusion Iplex Mobile plant PE 100 moved to project specific sites 37

Iplex Plasson Line 7 Fittingsbull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Plasson Series 1 Fittingsbull Push-fit joint stylebull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Blacklinetrade HP Ductile Iron Fittingsbull Compatible with Iplex Blacklinetrade HP

PN20 and PN25bull Adaptable by either flange or threaded

joints to other types of pipes pumps and valves

SECTION 3 - IPLEX PE FITTINGS Page number

Iplex Plasson Line 7 Fittings Iplex Plasson Line 7 Fittings 20mm ndash 160mm PE Plasson Line 7 compression fittings

23

Iplex Plasson Series 1 Fittings 20mm ndash 63mm PE Plasson Series 1 Compression Fittings 31

Iplex Blacklinetrade HP Ductile IronFittings 63mm ndash 100mm Ductile Iron mechanical fittings 34

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 5: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 4IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex Mobile Extrusionbull Manufactured in accordance with

ASNZS 4130bull Available in various pressure ratings

subject to pipe diameterbull Available in various pipe lengths

subject to pipe diameter and pipe PN class

bull The Iplex Mobile Extrusion plant has the ability to be moved on site

SECTION 4 - IPLEX MOBILE EXTRUSION Page number

Iplex Mobile Extrusion Iplex Mobile plant PE 100 moved to project specific sites 37

Iplex Plasson Line 7 Fittingsbull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Plasson Series 1 Fittingsbull Push-fit joint stylebull Compatible with Iplex Bluelinereg Iplex

Blacklinetrade Iplex Greenlinetrade Iplex Redlinereg and Iplex PE Effluent

Iplex Blacklinetrade HP Ductile Iron Fittingsbull Compatible with Iplex Blacklinetrade HP

PN20 and PN25bull Adaptable by either flange or threaded

joints to other types of pipes pumps and valves

SECTION 3 - IPLEX PE FITTINGS Page number

Iplex Plasson Line 7 Fittings Iplex Plasson Line 7 Fittings 20mm ndash 160mm PE Plasson Line 7 compression fittings

23

Iplex Plasson Series 1 Fittings 20mm ndash 63mm PE Plasson Series 1 Compression Fittings 31

Iplex Blacklinetrade HP Ductile IronFittings 63mm ndash 100mm Ductile Iron mechanical fittings 34

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 6: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 5IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 5 - INSTALLATION Page number

Trenchless or Trench Installation Summary of best practice trenchless and open-cut trench installation

43

Trenchless or Trench Installationbull Consult the lsquoPolyPete - How I Install PE

Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipesrsquo for more information on best practice trenched installation (found in the resources section of the Iplex website)

bull Consult Australasian Society for Trenchless Technology (ASTT) website for information on best practice trenchless installation

CONTENTS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 7: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 6IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

UNDERSTANDING PIPE CODES - EXAMPLE

Company name

Pipe Series Number Nominal Outside Diameter

PressurePN Rating

Standard Dimensional Ratio

1 6

2 7

3 8

4 9

5 10

IPLEX PIPELINES S1 DN800 PN10 SDR17 PE100 yymmdd hh PN ASNZS 4130 SMKP20400

1 3 5 7 9

2 4 6 8 10

Material Type

Date and Hour of Manufacture Location of Manufacture (PN = Palmerston North)

Manufacturing Standard

3rd Party Certification Licence Number

Iplex typically measure the pressure ratings of pipelines in Pressure Nominal (PN) or Bar The table below shows the PN pressure ratings of the Iplex PE pipes identified in this guide and their corresponding Pounds per Square Inch (PSI) rating

PN TO PSI CONVERSION

PNBar Pressure Rating PSI Pressure Rating

PN 6 870

PN 63 914

PN 9 1305

PN 10 1450

PN 12 1740

PN 125 1813

PN 15 2176

PN 16 2321

PN 18 2611

PN 20 2901

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 8: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

NOTES

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 9: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 8IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 8IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 8

0

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 10: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 9IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PE 80 PRESSURE PIPE

Iplex Bluelinereg is metric series PN125 polyethylene pressure pipe in the size range 20mm ndash 63mm OD manufactured from PE80 material Iplex Bluelinereg is coloured black with co-extruded light blue jacket and is available in coils of 25 50 and 100 metre lengths

Product Codebull 2500 Series

Specification

Iplex Bluelinereg is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrdquo using precompounded materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMKP20400)

Applications

Iplex Bluelinereg pressure pipes are suitable for the following applications

bull Water distribution for town rural and irrigation projectsbull Rider mains amp for urban water supplybull Cold water plumbing reticulationbull Household service lateral water connections from the

main supply

Installation

Jointing Iplex Bluelinereg can be joined using mechanical compression fittings complying with ASNZS 4129 such as the Plasson Line 7 and Plasson Series 1 ranges

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression Fittingsmdash Product and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Bluelinereg can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures wwwpipacomau

Design amp Installation Standards Iplex Bluelinereg pipe should be installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines - Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationbull ASNZS 2033 Installation of Polyethylene Pipe Systems

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 1IPLEX PE 80

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 11: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 10IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLUELINEreg PRODUCT RANGE

SECTION 1IPLEX PE 80

Pressure Class PN125 SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

20 200 203 20 161

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 636 61 511

Iplex Bluelinereg PE80 pressure pipe

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 12: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

NOTES

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 13: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 12IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 12IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X P

E 10

0

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 14: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS

WWWIPLEXCONZ 13IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PE 100 PRESSURE PIPE

Iplex Blacklinetrade is metric series PE 100 PN16 polyethylene pressure pipe including metric OD sizes from 25mm to 110mm for pressure water applications Iplex Blacklinetrade pipe is coloured black with blue multistripe and is available in coil sizes 25 50 and 100 metre lengths

Product Codebull 3500 BMS

Specification

Iplex Blacklinetrade is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using precompounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and Fittingsrdquo

Listed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

Applications

Iplex Blacklinetrade may be used for

bull Pressure water applications includingbull Water distribution for town rural stock water supply

and irrigation projectsbull Rider mains for urban water supplybull Household water connections from the main supplybull Compressed air lines Subject to special design and

pipe pressure class rerating - contact Iplex Pipelines for assistance and refer to PIPA Technical Guideline POP002 - Polyethylene (PE) Pipes and Fittings for Compressed Air (Refer to pipacomau)

Installation

Design amp Installation Standards Iplex Blacklinetrade pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Plasson Mechanical Compression Fittings For rsquoPlasson Compression Fitting Assembly Instructions and lsquoPlasson Series 1 Compression FittingsmdashProduct and Technical Cataloguersquo refer to section 3 of this guide

Electrofusion Jointing Iplex Blacklinetrade can also be joined with compatible electrofusion fittings Refer to the PIPA Guidelines for electrofusion procedures pipacomau

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 14IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade PRODUCT RANGE

SECTION 2IPLEX PE 100

Pressure Class

PN16

SDR11

Nominal Size DN Min OD (mm) Max OD (mm) Mean Wall (mm) Mean ID (mm)

25 250 253 25 201

32 320 323 31 259

40 400 404 39 324

50 500 505 49 404

63 630 633 61 511

75 750 757 72 609

90 900 909 87 735

110 1100 1110 105 895

Iplex Blacklinetrade PE 100 pressure pipe

WWWIPLEXCONZ 15IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PE 100 PRESSURE PIPE

The Iplex Blacklinetrade HP system is a range of PE 100 polyethylene pipe and associated ductile iron mechanical fittings designed to operate up to 20 bar or 25 bar (PN20 or PN25) Iplex Blacklinetrade HP is manufactured in metric OD sizes 63mm 90mm and 110mm and coil lengths of 50-metre or 100-metre

Product Codebull 3500 B

Specification

Iplex Blacklinetrade HP is manufactured in accordance with ASNZS 4130 ldquoPE Pipes for Pressure Applicationsrsquo using pre-compounded PE 100 materials conforming to ASNZS 4131 ldquoPE Compounds for Pressure Pipes and FittingsrdquoListed in PIPA Technical Guideline POP004 - Polyethylene Pipe and Fittings compounds Refer to pipacomau

(StandardsMark Licence number SMK20400)

Iplex Blacklinetrade HP ductile iron fittings are manufactured using a Quality Management System accredited to ASNZS ISO9001

Applications

Iplex Blacklinetrade HP may be used for

bull Pressure water applicationsbull Hill country rural stock water applications

Installation

Design amp Installation Standards Iplex Blacklinetrade HP pipes should be designed and installed in accordance with the following Standards

bull ASNZS 2566 Part 1 and Supplement ldquoBuried Flexible Pipelines ndash Structural Designrdquo Detailed Installation and Site Pressure Testing

bull ASNZS 2566 Part 2 ldquoInstallationrdquobull ASNZS 2033 Installation of polyethylene pipe systems

Jointing Iplex Blacklinetrade HP PN20 and PN25 can be joined using Iplex Blacklinetrade HP Ductile Iron mechanical fittings Combining Iplex Blacklinetrade HP pipe and Iplex Blacklinetrade HP fittings provides farmers with an alternative to equivalent size threaded joint metal pipes for up to 25 bar applications

Coil lengths Iplex Blacklinetrade HP pipe is supplied in 50-metre and 100-metre coils

Bloat Treatments Iplex Blacklinetrade HP is suitable for use with in-line anti-bloat agents used with in-line dispensing systems

Fittings Adaptability Iplex Blacklinetrade HP mechanical fittings adaptable to either flanged or threaded joints for coupling to other types of pipes pumps and valves

For more information on best practice installation and field testing procedures please consult the lsquoPolyPete - How I install PE pipesrsquo and lsquoPolyPete - How I Pressure test PE pipesrsquo guide (refer to wwwiplexconziplex-resources)

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 16IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX BLACKLINEtrade HP PRODUCT RANGE

SECTION 2IPLEX PE 100

Product Code Nominal Size (mm) Pressure Rating Bar Coil Length (m)

350063PN2050B 63 20 50

350063PN20100B 63 20 100

350090PN2050B 90 20 50

350090PN20100B 90 20 100

3500110PN2050B 110 20 50

3500110PN20100B 110 20 100

350063PN2550B 63 25 50

350063PN25100B 63 25 100

350090PN2550B 90 25 50

350090PN25100B 90 25 100

3500110PN2550B 110 25 50

3500110PN25100B 110 25 100

Iplex Blacklinetrade HP PE 100 pressure pipe

WWWIPLEXCONZ 17IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Iplex Poliplexreg is a range of metric series PE 100 polyethylene pressure pipe including metric OD sizes from 75mm to 1200mm for pressure water applications

High Stress Crack Resistant (HSCR) Resin Subject to confirmation from Iplex Pipelines NZ Limited alternative PE100 grades can be offered to suit the specific requirements of projects ndash such as PE100 HSCR resin

Product Codesbull 3500 Seriesbull 3500 CX Blue

Specification

Iplex Poliplexreg is manufactured in accordance with ASNZS 4130 lsquoPE Pipes for Pressure Applicationsrsquo using precompounded PE materials conforming to ASNZS 4131 lsquoPE Compounds for Pressure Pipes and Fittingsrsquo listed in PIPA Technical Guide POP004 - Polyethylene Pipe and Fittings compounds (Refer to pipacomau)

(StandardsMark Licence number SMK20400)

High Stress Crack Resistant Resin (HSCR)

bull Complies with ASNZS 4131bull Listed in PIPA POP004 Polyethylene Pipe and Fittings

Compoundsbull Meets the requirements of PIPA POP016 High Stress

Crack Resistant PE100

Applications

Iplex Poliplexreg can be used for the following applications

bull Water distribution for town rural and irrigation purposes

bull Pressure sewer rising mainsbull Submarine pipelines for ocean outfalls and under

harbour pipelinesbull Estuary and river crossingsbull Above ground temporary and unrestrained pipelinesbull Above ground fixed (restrained) pipe systembull Pipeline renovation linersbull Sleeve pipes for corrosion or mechanical protectionbull Sub-soil drainage (when slotted)bull Dredge discharge linesbull Mine tailings disposalbull Trenchless installations including horizontal directional

drilling pipe bursting and slip liningbull Landfill gas extraction

SECTION 2IPLEX PE 100

WWWIPLEXCONZ 18IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Installation

Jointing Methodsbull Butt Fusion The pipe ends are heated to melting point

then brought together in a Butt Fusion machine to form a homogeneous weld The resulting joint is end load resistant and if installed correctly should perform under pressure similarly to the parent pipe

bull Electrofusion fittings These employ an electrical heating coil incorporated inside a moulded socket When energised from an electrofusion control box the coil melts the adjacent material causing the pipe and socket to fuse together

bull Butt Fusion Flange combination

Design amp Installation Standards Iplex Poliplexreg pipe should be designed and installed in accordance with the following Standards and Guidelines

bull Buried Structural Design ASNZS 2566 Part 1 and supplement 1 ldquoBuried Flexible Pipelines Structural Designrdquo

bull Detailed Installation and Site Pressure Testing AS NZS 2566 Part 2 ldquoInstallationrdquo

bull ASNZS 2033 Installation of polyethylene pipe systems

For more information on best practice installation and field testing procedures please consult the ldquoPolyPete - How I Install PE Pipes ldquo and ldquoPolyPete - How I pressure test PE Pipes ldquo guide (refer to wwwiplexconziplex-resources)

Product Storage In direct hot sunlight straight lengths of PE pipe may bow slightly due to uneven heating of individual pipe lengths Rotation of bowed pipe by 180deg in direct hot sunlight may assist with straightening

Iplex recommends that coloured PE pressure pipes (such as jacketed striped or solid colours but excluding solid black) are not stored in direct sunlight for more than 6 months from the date of manufacture Coloured pipes held in storage for longer than 6 months should be shielded from direct sunlight such as by covering with a breathable tarpaulin or storage inside a building

SECTION 2IPLEX PE 100

Iplex Poliplexreg PE 100 pressure pipe showing butt fusion welding Iplex Poliplexreg PE 100 pressure pipe showing electro fusion welding

WWWIPLEXCONZ 19IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PE 100 PRESSURE PIPE

Colour Options

Colour options may be subject to diameter tooling availability and minimum order quantity Black (B) Royal blue (CX Blue) jacket cream (CX) jacket Black with coloured stripes

Fully black pipe for general applications

Dark blue jacket or stripes on black inner for pressure drinking water applications

Purple jacket or stripes on black inner for recycled or ldquogreyrdquo water applications

Light grey jacket or stripes on black inner for gravity wastewater applications

Cream jacket or stripes on black inner for pressure wastewater applications

WWWIPLEXCONZ 20IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 2IPLEX PE 100

IPLEX POLIPLEXreg PRODUCT RANGE

IPLEX POLIPLEXreg Polythene Pipe Dimensions to AS 4130 Series 1 (mm)

SDR41 SDR33 SDR26 SDR21 SDR17 SDR136 SDR11 SDR9 SDR74

PN for PE100 4 63 8 10 125 16 20 25

DNMin OD

(mm)

Max OD

(mm)

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

Mean Wall

Mean ID

75 75 757 - - 25 704 31 692 39 676 48 658 59 637 72 610 89 576 109 536

90 90 909 - - 30 845 37 830 46 813 57 790 70 765 87 731 107 691 130 645

110 110 111 29 1047 36 1032 46 1013 56 992 70 965 86 933 105 894 130 845 160 785

125 125 1262 33 1189 41 1173 51 1154 63 1129 78 1099 97 1061 120 1015 148 960 181 894

140 140 1413 38 1331 46 1314 58 1291 71 1264 88 1231 109 1188 134 1139 166 1076 202 1003

160 160 1615 42 1523 52 1504 66 1476 81 1445 100 1407 124 1359 154 1300 189 1231 231 1146

180 180 1817 47 1715 59 1692 73 1663 91 1627 113 1583 140 1528 173 1463 212 1385 259 1291

200 200 2018 52 1905 66 1877 81 1846 101 1806 125 1758 155 1699 192 1625 236 1537 288 1433

225 225 2271 58 2144 73 2115 91 2079 114 2033 141 1978 175 1911 216 1829 265 1731 324 1613

250 250 2523 66 2380 81 2349 101 2309 125 2261 156 2200 194 2124 239 2034 294 1924 360 1792

280 280 2826 73 2667 91 2631 113 2587 141 2530 175 2463 217 2379 267 2278 330 2153 403 2007

315 315 3179 81 3002 102 2960 128 2909 158 2849 197 2771 244 2679 301 2563 371 2423 452 2261

355 355 3582 92 3382 115 3336 143 3279 178 3210 222 3111 275 3016 339 2888 417 2732 510 2546

400 400 4036 103 3800 130 3758 161 3695 201 3615 249 3519 309 3399 382 3254 470 3078 574 2870

450 450 4541 116 4289 145 4230 181 4158 226 4068 281 3959 348 3824 430 3661 528 3465 647 3227

500 500 5045 130 4763 161 4700 201 4620 251 4520 311 4400 387 4249 477 4068 587 3849 717 3589

560 560 565 144 5337 181 5263 225 5175 281 5064 349 4927 433 4759 534 4558 661 4303 894 3837

630 630 6357 162 6004 203 5922 254 5821 315 5698 392 5544 487 5355 601 5126 744 4841 647 3227

710 710 7164 183 6765 229 6773 286 6559 356 6419 443 6246 549 6034 685 5762 829 5474 717 3589

800 800 8072 206 7623 258 7520 322 7392 401 7234 498 7039 618 6800 764 6508 934 6168 - -

900 900 9081 232 8578 291 8460 362 8317 451 8139 563 7917 685 7649 860 7322 1051 6940 - -

1000 1000 1009 258 9529 322 9401 402 9241 502 9041 624 8797 773 8523 955 8135 1167 7711 - -

1200 1200 1210 310 11431 386 11278 483 11084 602 10846 749 10623 928 10196 1146 9758 - - - -

1400 1400 1410 362 13326 451 13148 560 12930 706 12648 871 12318 1089 11888 1347 11356 - - - -

1600 1600 1610 412 15223 515 15020 647 14761 801 14448 989 14072 1236 13578 - - - - - -

1800 1800 18162 461 17127 583 16884 728 16628 901 16280 1113 15856 1391 15270 - - - - - -

2000 2000 2018 513 19064 647 18794 808 18474 1001 18089 1236 17619 1545 16961 - - - - - -

bull Available lengths are subject to PN class and maximum weight limitsbull For all Iplex Poliplex products 12 metre lengths or longer freight costs are POAbull 3500 series 3100 series and 3500 ME series polyethylene products are not necessarily held in stock and manufacture is subject to the quantity requested being viable to

produce Please contact Iplex NZ on 0800 800 262 for more information

NOTES

WWWIPLEXCONZ 22IPLEX PVC PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 22IPLEX ENERGY AND COMMS SYSTEMS 2020WWWIPLEXCONZ

IPLE

X F

ITTI

NG

S

WWWIPLEXCONZ 23IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mmGeneral Instructions

Follow these assembly Instructions for a secure connection

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into the pipe to avoid pull outs Alternatively replace the Split Grip Ring

STEP 1

Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

STEP 2

Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

STEP 3

Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-Ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

STEP 4

Firmly hand tighten the Backing Nut Use a Plasson C-Ring wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN50 and DN63 The full hydraulic seal is achieved when the pipe passes through the O-Ring Nut tightening is only to achieve pullout resistance - the hydraulic seal is automatically created when the pipe is pushed past the captive O-Ring

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm) Plasson Line 7 Fittings - Assembly Instructions (20mm - 63mm)

General Instructions

Follow these assembly Instructions for a secure leakproof connection to last a lifetime

bull Ensure the pipe end to be inserted into the fitting and the fitting itself are both totally free of dirt grit scratches and any other damage

bull Do not overtighten the Backing Nut when closing NEVER use wrenches with handle lengths longer than 22cm ndash excessive torque during tightening can spread the Backing Nut cone and result in pullouts

bull If fittings are reused ensure the Split Grip Ring is sharp and can bite into thepipe to avoid pull outs Alternatively replace the Split Grip Ring

Note Use PTFE tape for all threaded connections

1 Cut the pipe square and remove burrs It is good trade practice to chamfer (with a file or Plasson 2555 chamfering tool) and lubricate the pipe ends (use Medlube or an approved equivalent) Chamfering and lubrication will ease insertion particularly for sizes DN 40 DN 50 and DN 63 however these steps are optional

2 Undo the nut up to the last thread Do not remove the Backing Nut from the fitting body

3 Twist the pipe into the fitting through the Backing Nut and through the Split Grip Ring until it meets the first resistance ndash pushing against the captive O-ring Then push and twist the pipe through and past the O-ring until it stops at the pipe stop inside the fitting ndash the final stop

4 Firmly hand tighten the Backing Nut Use a Plasson ldquoC-Ringrdquo wrench for a further half turn past hand tight for final tightening of fittings for diameters DN40 DN 50 and DN 63 The full hydraulic seal is achieved when the pipe passes through the O-ring Nut tightening is only to achieve pullout resistance ndash the hydraulic seal is automatically created when the pipe is pushed past the captive O-ring

Step 1

Step 1

Step 2

Step 3

Step 4

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

WWWIPLEXCONZ 24IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PE COMPRESSION FITTINGS

General Instructions CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Plasson Line 7 Fittings - Assembly Instructions (75mm - 125mm) CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSS

Assembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

Cut the pipe square Unscrew the Backing Nut and remove the Split Grip ring Reposition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

CCOOMMPPRREESSSSIIOONN FFIITTTTIINNGGSS FFOORR IIPPLLEEXX PPEE EELLEECCTTRRIICCAALL DDUUCCTTSS aanndd CCOOMMMMUUNNIICCAATTIIOONNSS DDUUCCTTSSAssembly Instructions (75mm - 125mm)

General Instructions

he Split Grip ring RepoCut the pipe square Unscrew the Backing Nut and remove t sition Backing Nut Follower Bush and O ring on the pipe two diameters back Lubricate pipe and O ring with Medlube

Push the pipe fully into the fitting body up to the internal stop Push the O ring and Follower Bush forward until they rest against the fitting (They will not enter the body of the fitting)

Tighten the Backing Nut to drive the Follower Bush and O ring together right into the fitting until the Follower Bush is flush with fitting mouth Use a Plasson C ring spanner to assist as needed

Fully unscrew the Backing Nut and pull back along the pipe

Now open the Split Grip Ring and place directly over and onto the pipe with the lugs and flat end facing and touching the Follower Bush

Firmly tighten the Backing Nut with only a Plasson ldquoC-ringrdquo spanner (Max handle length = 46cm) Do not overtighten

Backing Nut

Pipe

Body

lsquoOrsquo Ring

Split Grip Ring

Maximum operating pressure at 20ordmC

PLASSON 16 Bar Pipe Stop

Follower Bush

75mm - 125mm

WWWIPLEXCONZ 25IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE 20 - 110mm 16 bar pressure rating unless stated otherwise

90o Elbow Product Code Size (mm)

250120 20mm

250125 25mm

250132 32mm

250140 40mm

250150 50mm

250163 63mm

250175 75mm

250190 90mm

2501110 110mm

Slip Tee 90o Product Code Size (mm)

250220 20mm

250225 25mm

250232 32mm

250240 40mm

250250 50mm

250263 63mm

Female Threaded Tee Product Code Size (mm) x BSP

25032015 20 x frac12rdquo

25032520 25 X frac34rdquo

25033225 32 x 1rdquo

25034032 40 x 1 frac14rdquo

25035040 50 x 1 frac12rdquo

25036350 63 x 2rdquo

25037565 75 x 2 frac12rdquo

25039080 90 x 3rdquo

2503110100 100 x 4rdquo

Male Threaded Elbow 90o Product Code Size (mm)

250720 20 x frac12rdquo

250725 25 X frac34rdquo

250732 32 x 1rdquo

250740 40 x 1 frac14rdquo

250750 50 x 1 frac12rdquo

250763 63 x 2rdquo

90mm 10 Bar

40mm - 63mm 125 Bar

110mm 6 Bar

Tee 90o Product Code Size (mm) x BSP

250420 20mm

250425 25mm

250432 32mm

250440 40mm

250450 50mm

250463 63mm

250475 75mm

250490 90mm

2504110 110mm

40 - 63mm 125 Bar

Female Threaded Elbow 90o Product Code Size (mm)

250820 20 x frac12rdquo

250825 25 X frac34rdquo

250832 32 x 1rdquo

250840 40 x 1 frac14rdquo

250850 50 x 1 frac12rdquo

250863 63 x 2rdquo

Wingback Female Adapter Product Code Size (mm)

250920 20 x frac12rdquo

250925 25 X frac34rdquo

Reducing Tee 90o Product Code Size (mm) x BSP

25052520 25 x 20mm

25053225 32 x 25mm

25054032 40 x 32mm

25055040 50 x 40mm

25056350 63 x 50mm

25057563 75 x 63mm

Female Threaded Adapter Product Code Size (mm) x BSP

250620 20 x frac12rdquo

250625 25 X frac34rdquo

250632 32 x 1rdquo

250640 40 x 1 frac14rdquo

250650 50 x 1 frac12rdquo

250663 63 x 2rdquo

25067565 75 x 2 frac12rdquo

250690 90 x 3rdquo

2506110 100 x 4rdquo

90mm 10 Bar110mm 6 Bar

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

31

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 250120 20 200 10 250125 25 150 10 250132 32 100 5 250140 40 60250150 50 35250163 63 24250175 75 12250190 90 82501110 110 4

250220 20 140 10 250225 25 100 5 250232 32 60 5 250240 40 40250250 50 25250263 63 16

25032015 20 x 12rdquo 180 10 25032520 25 x 34rdquo 140 5 25033225 32 x 1rdquo 80 5 25034032 40 x 114rdquo 5525035040 50 x 112rdquo 3625036350 63 x 2rdquo 20 25037565 75 x 212rdquo 1025039080 90 x 3rdquo 7 2503110100 110 x 4 4

250420 20 120 10 250425 25 100 5 250432 32 60 5 250440 40 40250450 50 25250463 63 16250475 75 8250490 90 52504110 110 2

25052520 25 x 20 100 5 25053225 32 x 25 70 5 25054032 40 x 32 40 25055040 50 x 40 30 25056350 63 x 50 18 25057563 75 x 63 10

250620 20 x 12rdquo 350 10 250625 25 x 34rdquo 250 10 250632 32 x 1rdquo 150 5 250640 40 x 114rdquo 110250650 50 x 112rdquo 70250663 63 x 2rdquo 48 25067565 75 x 212rdquo 28250690 90 x 3rdquo 16 2506110 110 x 4rdquo 8

250720 20 x 12rdquo 350 10 250725 25 x 34rdquo 250 10 250732 32 x 1rdquo 140 5 250740 40 x 114rdquo 90250750 50 x 112rdquo 55250763 63 x 2rdquo 35

250820 20 x 12rdquo 350 10 250825 25 x 34rdquo 250 10 250832 32 x 1rdquo 150 5 250840 40 x 114rdquo 90250850 50 x 112rdquo 60250863 63 x 2rdquo 35

250920 20 x 12rdquo 150250925 25 x 34rdquo 100

90deg ELBOW FampF

FEMALE THREADED BRANCH TEE FampFampF

90mm 10 Bar110mm 6 Bar

REDUCING BRANCH TEE FampFampF

90deg MALE THREADED ELBOW MampF

90deg PLAIN TEE FampFampF

90deg SLIP TEE FampFampF40-63mm 125 Bar

FEMALE THREADEDADAPTER FampF

90mm 10 Bar110mm 6 Bar

90deg FEMALETHREADED ELBOW FampF

FEMALE WINGBACK ADAPTOR FampF

WWWIPLEXCONZ 26IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Female Threaded Branch Saddle Product Code Size (mm) x BSP

25192520 25 x frac34rdquo

25193225 32 x 1rdquo

25194025 40 x 1rdquo

25195015 50 x frac12rdquo

25195020 50 x frac34rdquo

25195025 50 x 1rdquo

25195032 50 x 1frac14rdquo

25196315 63 x frac12rdquo

25196320 63 x frac34rdquo

25196325 63 x 1rdquo

25196332 63 x 1frac14rdquo

25196340 63 x 1frac12rdquo

25197525 75 x 1rdquo

25197550 75 x 2rdquo

25199025 90 x 1rdquo

25199050 90 x 2rdquo

251911025 110 x 1rdquo

251911032 110 x 1frac14rdquo

251911040 110 x 1frac12rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Slip Coupling Product Code Size (mm)

251120 20mm

251125 25mm

251132 32mm

251140 40mm

251150 50mm

251163 63mm

Designed for retrofit ldquosliprdquo assembly into an existing pipeline

Universal Coupling Product Code Size (mm)

25122515-22 20 x 15 to 22

25122520-27 25 x 20 to 27

25122527-35 25 x 27 to 35

25123227-35 32 x 27 to 35

25125035-50 50 x 35 to 50

Adapts ldquometric ODrdquo PE pipe to PVC steel copper and Imperial OD LDPE or HDPE within the OD size ranges above

50mm 10 Bar

Male Threaded Adapter Product Code Size (mm) x BSP

251320 20 x frac12rdquo

25132515 25 X frac12rdquo

251325 25 X frac34rdquo

251332 32 x 1rdquo

251340 40 x 1 frac14rdquo

251350 50 x 1 frac12rdquo

251363 63 x 2rdquo

25137565 75 x 2 frac12rdquo

251390 90 x 3rdquo

2513110 110 x 4rdquo

Coupling Product Code Size (mm)

251020 20mm

251025 25mm

251032 32mm

251040 40mm

251050 50mm

251063 63mm

251075 75mm

251090 90mm

2510110 110mm

2510125 (PN16) 125mm

2510160 (PN10) 160mm

Reducing Coupling Product Code Size (mm)

25232520 25 x 20mm

25233225 32 x 25mm

25234032 40 x 32mm

25235040 50 x 40mm

25236350 63 x 50mm

25237563 75 x 63mm

25239075 90 x 75mm

252311090 110 x 90mm

2510160

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

25mm - 63mm 125 Bar 75mm - 110mm 10 Bar

WWWIPLEXCONZ 27IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

Reducing Set Product Code Size (mm)

25242520 25 x 20mm

25243220 32 x 20mm

25243225 32 x 25mm

25244025 40 x 25mm

25244032 40 x 32mm

25245025 50 x 25mm

25245032 50 x 32mm

25245040 50 x 40mm

25246325 63 x 25mm

25246332 63 x 32mm

25246340 63 x 40mm

25246350 63 x 50mm

25247563 75 x 63mm

252411063 110 x 63mm

252411075 110 x 75mm

252411090 110 x 90mm

Reduces the size of any Plasson Line 7 mechanical socket

110mm x 75mm 10 Bar

110mm x 90mm 10 Bar

Plug Adapter Product Code Size (mm)

253020 20mm

253025 25mm

253032 32mm

253040 40mm

253050 50mm

253063 63mm125 Bar

Shouldered Adapter Product Code Size (mm)

252563 63mm

2525110 110mm

Chamfering Tool Product Code Size (mm)

25552063 25 to 63mm

End Plug Product Code Size (mm)

253120 20mm

253125 25mm

253132 32mm

253140 40mm

253150 50mm

253163 63mm

253175 75mm

253190 90mm

2531110 110mm

Wrench Product Code Size (mm)

25504075 40 to 75mm

255063125 63 to 125mm

Designed for use with Plasson Line 7 fittings only

Inserts Product Code Size (mm)

20mm Plasson Insert 20mm

25mm Plasson Insert 25mm

32mm Plasson Insert 32mm

40mm Plasson Insert 40mm

50mm Plasson Insert 50mm

63mm Plasson Insert 63mm

32

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY 251020 20 200 10 251025 25 180 10 251032 32 100 5 251040 40 75251050 50 45251063 63 30251075 75 16251090 90 102510110 110 5

251120 20 240 10 251125 25 150 10 251132 32 80 5 251140 40 55251150 50 30251163 63 24

25122515-22 25 x 15-22 90 25122520-27 25 x 20-27 80 25122527-35 25 x 27-35 60 25123227-35 32 x 27-35 60 25125035-50 50 x 35-50 20

251320 20 x 12rdquo 350 10 25132515 25 x 12rdquo 250 10 251325 25 x 34rdquo 250 10 251332 32 x 1rdquo 150 5 251340 40 x 114rdquo 110 251350 50 x 112rdquo 70 251363 63 x 2rdquo 48 25137565 75 x 212rdquo 28 251390 90 x 3rdquo 16 2513110 110 x 4rdquo 8

25192520 25 x 34rdquo 30025193225 32 x 1rdquo 150 25194025 40 x 1rdquo 150 25195015 50 x 12rdquo 10025195020 50 x 34rdquo 10025195025 50 x 1rdquo 100 25195032 50 x 114rdquo 10025196315 63 x 12rdquo 7025196320 63 x 34rdquo 7025196325 63 x 1rdquo 70 25196332 63 x 114rdquo 7025196340 63 x 112rdquo 6025197525 75 x 1rdquo 55 25197550 75 x 2rdquo 50 25199025 90 x 1rdquo 45 25199050 90 x 2rdquo 40 251911025 110 x 1rdquo 36 251911032 110 x 114rdquo 36251911040 110 x 112rdquo 36

25232520 25 x 20 200 10 25233225 32 x 25 120 5 25234032 40 x 32 90 25235040 50 x 40 60 25236350 63 x 50 36 25237563 75 x 63 20 25239075 90 x 75 12 252311090 110 x 90 6

MALE THREADEDADAPTER MampF

COUPLING FampF

SLIP COUPLING FampF

UNIVERSAL COUPLING FampF50mm 10 Bar

REDUCING COUPLING FampF

FEMALE THREADED BRANCH SADDLE

25-63mm 125 Bar75-110mm 10 Bar

SHOULDERED ADAPTER MampF

252563 63 452525110 110 8

20 - 50mm 63 - 110mm

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

36

PLASSON POLYPROPYLENE VALVES

ORDER CODE SIZE mm CTN BAG QTY 2711 34rdquo 130 5 2712 1rdquo 130 5

2713 250 5

272025 25 800 5

2731 34rdquo 140 5 2732 1rdquo 120 5

273532 114rdquo 40273540 112rdquo 24273550 2rdquo 15

274120 20 100 5 274125 25 80 5 274132 32 60 5

QUICK COUPLING VALVE 10 Bar

RISER KEY

VALVE10 Bar

CHECK VALVE INSERT16 Bar

COMPRESSION STOPCOCK16 Bar

ANGLE SEAT VALVE8 BAR

ORDER CODE SIZE mm QTY 193 155 x 200 x 200 high 10 193LIDGR 155 x 200 80 193LIDBL 155 x 200 80

Valve box only ndash no lidGreen lidBlue lid

POLYETHYLENE VALVE BOXES

POLYETHYLENE (WATER METER) VALVE BOXES

PIPE CHAMFERING TOOL

WRENCH - PLASSON LINE 7

25504075 40 - 75 75 255063125 63 - 125 20

25552063 20 - 63 64

PLASSON LINE 7 ACCESSORIES

ORDER CODE SIZE mm CTN BAG QTY

USE WITH 2712 QUICK COUPLING VALVE

USE WITH 2713 RISER KEY

CONVERTS A DN 25 PLASSON LINE 7 COMPRESSON FITTING TO A ONE-WAY CHECK VALVE

GREEN LIDBLUE LID

WWWIPLEXCONZ 28IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Nipple Product Code Size BSP

251615 frac12rdquo

251620 frac34rdquo

251625 1rdquo

251632 1frac14rdquo

251640 1frac12rdquo

251650 2rdquo16 Bar

SECTION 3IPLEX PE FITTINGS

PLASSON LINE 7 PRODUCT RANGE

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

Threaded Elbow Product Code Size BSP

251515 frac12rdquo

251520 frac34rdquo

251525 1rdquo

251532 1frac14rdquo

251540 1frac12rdquo

251550 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Tee Product Code Size BSP

251415 frac12rdquo

251420 frac34rdquo

251425 1rdquo

251432 1frac14rdquo

251440 1frac12rdquo

251450 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

Threaded Reducing Bush Product Code Size (mm) x BSP

25172015 frac34rdquo x frac12rdquo

25172515 1rdquo x frac12rdquo

25172520 1rdquo x frac34rdquo

25173215 1frac14rdquo x frac12rdquo

25173220 1frac14rdquo x frac34rdquo

25173225 1frac14rdquo x 1rdquo

25174015 1frac12rdquo x frac12rdquo

25174020 1frac14rdquo x frac34rdquo

25174025 1frac12rdquo x 1rdquo

25174032 1frac12rdquo x 1frac14rdquo

25175015 2rdquo x frac12rdquo

25175020 2rdquo x frac34rdquo

25175025 2rdquo x 1rdquo

25175032 2rdquo x 1frac14rdquo

25175040 2rdquo x 1frac12rdquo

25176550 2frac12rdquo x 2rdquo

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

Barrel Union Threaded Male Adapter Product Code Size (mm) x BSP

25722515 25 x frac12rdquo

25722520 25 X frac34rdquo

25723215 32 x frac12rdquo

25723220 32 x frac34rdquo

25723225 32 x 1rdquo

25724025 40 x 1rdquo

25724032 40 x 1frac14rdquo

25724040 40 x 1 frac12rdquo

25725025 50 x 1rdquo

25725032 50 x 1frac14rdquo

25725040 50 x 1frac12rdquo

25725050 50 x 2rdquo

25726325 63 x 1rdquo

25726332 63 x 1frac14rdquo

25726340 63 x 1frac12rdquo

25726350 63 x 2rdquo

25726365 63 x 2frac12rdquo

25727540 75 x 1frac12rdquo

25727550 75 x 2rdquo

25727565 75 x 2frac12rdquo

25727580 75 x 3rdquo

75mm 12 Bar

Modular Adapter Product Code Size (mm)

257920 20mm

257925 25mm

257932 32mm

257940 40mm

257950 50mm

257963 63mm

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

34

25722515 25 x frac12rdquo 200 25722520 25 x frac34rdquo 20025723215 32 x frac12rdquo 18025723220 32 x frac34rdquo 180 25723225 32 x 1rdquo 180 25724025 40 x 1rdquo 130 25724032 40 x 1frac14rdquo 130 25724040 40 x 1frac12rdquo 13025725025 50 x 1rdquo 80 25725032 50 x 1frac14rdquo 80 25725040 50 x 1frac12rdquo 8025725050 50 x 2rdquo 80 25726325 63 x 1rdquo 60 25726332 63 x 1frac14rdquo 60 25726340 63 x 1frac12rdquo 6025726350 63 x 2rdquo 60 25726365 63 x 2frac12rdquo 60 25727540 75 x 1frac12rdquo 30 25727550 75 x 2rdquo 30 25727565 75 x 2frac12rdquo 30 25727580 75 x 3rdquo 30 257920 20 300 10 257925 25 250 10 257932 32 180 5 257940 40 100 5 257950 50 70 257963 63 45

20mm Plasson Insert 20 2520 40 25mm Plasson Insert 25 1680 40 32mm Plasson Insert 32 920 40 40mm Plasson Insert 40 480 20 50mm Plasson Insert 50 240 20 63mm Plasson Insert 63 110 10

PIPE SUPPORT INSERT

BARREL UNION THREADED MALE

ADAPTOR75mm 125 Bar

MODULAR ADAPTOR

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under picture For use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent PipeORDER CODE SIZE mm CTN BAG QTY

RECOMMENDED FOR USE WITH ANY APPLICATIONS WITH COMPRESSED AIR NEGATIVE PRESSUREOR ELEVATED TEMPERATURES ABOVE GROUND ( NOT EXCEEDING 40 Deg C amp WITH PRESSURE RERATING)

NOT REQUIRED WITH PLASSON FITTINGS FOR CONVENTIONAL COLD WATER PRESSURE APPLICATIONS

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

WWWIPLEXCONZ 29IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Threaded Reducing Bush Product Code Size (mm) x BSP

25178025 3rdquo x 1rdquo

25178032 3rdquo x 1frac14rdquo

25178040 3rdquo x 1frac12rdquo

25178050 3rdquo x 2rdquo

25178065 3rdquo x 2frac12rdquo

251710050 4rdquo x 2rdquo

251710080 4rdquo x 3rdquo

SECTION 3IPLEX PE FITTINGS

PLASSON BSP THREADED FITTINGS PRODUCT RANGE

PLASSON SWIVEL TEES AND MANIFOLDS PRODUCT RANGE

Threaded Reducing Nipple Product Code Size (mm) x BSP

25182015 frac34rdquo x frac12rdquo

25182515 1rdquo x frac12rdquo

25182520 1rdquo x frac34rdquo

25183215 1frac14rdquo x frac12rdquo

25183220 1frac14rdquo x frac34rdquo

25183225 1frac14rdquo x 1rdquo

25184015 1frac12rdquo x frac12rdquo

25184020 1frac12rdquo x frac34rdquo

25184025 1frac12rdquo x 1rdquo

25184032 1frac12rdquo x 1 frac14rdquo

25185015 2rdquo x frac12rdquo

25185020 2rdquo x frac34rdquo

25185025 2rdquo x 1rdquo

25185032 2rdquo x 1 frac14rdquo

25185040 2rdquo x 1frac12rdquo

16 Bar

Tapper Swivel Tee For PE Pipe Product Code Size (mm)

25366325 63 x 25

253611025 110 x 25

253612525 125 x 25

253612532 125 x 32

253618025 180 x 25

253618032 180 x 32

Centre Connection MeterManifold Product Code Size (mm)

2540504P 50mm

2540506P 50mm

Tapper Swivel Tee For Series 2PVC Pipe Product Code Size (mm)

253612225 122 x 25

253617725 177 x 25

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 4rdquo 10 Bar

4 Port 6 Port

Threaded Plug Product Code Size BSP

2530T15 frac12rdquo

2530T20 frac34rdquo

2530T25 1rdquo

2530T32 1frac14rdquo

2530T40 1frac12rdquo

2530T50 2rdquo16 Bar

Threaded Socket Product Code Size BSP

252115 frac12rdquo

252120 frac34rdquo

252125 1rdquo

252132 1frac14rdquo

252140 1frac12rdquo

252150 2rdquo

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

35

PLASSON LINE 5 BSP THREADED FITTINGS Refer under pictures for PN ratings

ORDER CODE SIZE CTN BAG QTY 251415 12rdquo 700 10 251420 34rdquo 500 10 251425 1rdquo 260 10 251432 114rdquo 140 5 251440 112rdquo 90 5 251450 2rdquo 60 5

251515 12rdquo 1000 10 251520 34rdquo 700 10 251525 1rdquo 400 10 251532 114rdquo 200 10 251540 112rdquo 150 5 251550 2rdquo 80 5

251615 12rdquo 2000 10 251620 34rdquo 1300 10 251625 1rdquo 800 10 251632 114rdquo 400 10 251640 112rdquo 300 5 251650 2rdquo 180 5

25172015 34rdquo x 12rdquo 2000 10 25172515 1rdquo x 12rdquo 1200 10 25172520 1rdquo x 34rdquo 1000 10 25173215 114rdquo x 12rdquo 700 10 25173220 114rdquo x 34rdquo 700 10 25173225 114rdquo x 1rdquo 700 10 25174015 112rdquo x 12rdquo 600 10 25174020 112rdquo x 34rdquo 600 10 25174025 112rdquo x 1rdquo 500 10 25174032 112rdquo x 114rdquo 500 10 25175015 2rdquo x 12rdquo 350 5 25175020 2rdquo x 34rdquo 350 5 25175025 2rdquo x 1rdquo 300 5 25175032 2rdquo x 114rdquo 320 5 25175040 2rdquo x 112rdquo 320 5 25176550 212rdquo x 2rdquo 200 5 25178025 3 x 1 150 2 25178032 3 x 114rdquo 150 2 25178040 3 x 112rdquo 150 2 25178050 3rdquo x 2rdquo 100 2 25178065 3rdquo x 212rdquo 150 2 251710050 4 x 2 80 2251710080 4 x 3 80 2

25182015 34rdquo x 12rdquo 1500 10 25182515 1 x 12rdquo 800 10 25182520 1rdquo x 34rdquo 800 10 25183215 114rdquo x 12rdquo 500 10 25183220 114rdquo x 34rdquo 500 10 25183225 114rdquo x 1rdquo 500 10 25184015 112rdquo x 12rdquo 500 5 25184020 112rdquo x 34rdquo 500 5 25184025 112rdquo x 1 400 5 25184032 112rdquo x 114rdquo 400 5 25185015 2 x 12rdquo 280 5 25185020 2 x 34rdquo 260 525185025 2 x 1 260 525185032 2 x 114rdquo 240 5 25185040 2rdquo x 112rdquo 240 5

252115 12rdquo 1200 10 252120 34rdquo 1000 10 252125 1rdquo 600 10 252132 114rdquo 250 10 252140 112rdquo 250 10 252150 2rdquo 150 5

2530T15 12rdquo 2500 10 2530T20 34rdquo 1500 10 2530T25 1rdquo 1000 102530T32 114rdquo 700 10 2530T40 112rdquo 500 10 2530T50 2rdquo 300 10

THREADED TEE12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED ELBOW12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED REDUCING BUSH

12rdquo-1rdquo 16 Bar114rdquo-4rdquo 10 Bar

THREADED NIPPLE16 Bar

THREADED REDUCING NIPPLE16 Bar

THREADED SOCKET12rdquo-1rdquo 16 Bar114rdquo-2rdquo 10 Bar

THREADED PLUG16 Bar

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

33

PLASSON LINE 7 COMPRESSION FITTINGS (20-110mm 16 Bar) unless stated under pictureFor use with Greenline Redline Rural Black Blueline Blackline PN16 and Effl uent Pipe

ORDER CODE SIZE mm CTN BAG QTY

25242520 25 x 20 300 10 25243220 32 x 20 300 10 25243225 32 x 25 250 10 25244025 40 x 25 180 10 25244032 40 x 32 200 10 25245025 50 x 25 120 5 25245032 50 x 32 120 5 25245040 50 x 40 120 5 25246325 63 x 25 80 25246332 63 x 32 80 25246340 63 x 40 80 25246350 63 x 50 80 25247563 75 x 63 70 252411063 110 x 63 24 252411075 110 x 75 20 252411090 110 x 90 20

253020 20 2500 10 253025 25 1500 10 253032 32 1000 10 253040 40 720 10 253050 50 400 10 253063 63 200 10

253120 20 350253125 25 250253132 32 180253140 40 110253150 50 75253163 63 45253175 75 28253190 90 162531110 110 10

25366325 63 x 25 40 253611025 110 x 25 20 253612525 125 x 25 16 253612532 125 x 32 16 253618025 180 x 25 8 253618032 180 x 32 8

253612225 122 x 25 16 253617725 177 x 25 8

2540504P 50 12540506P 50 4

4 Port6 Port

PLUG ADAPTER125 Bar

REDUCING SET110mm x 75mm 10 Bar110mm x 90mm 10 Bar

END PLUG

TAPPER SWIVEL TEE FOR PE PIPE

TAPPER SWIVEL TEE FOR SERIES 2 PVC PIPE

CENTRE CONNECTION METER MANIFOLD

frac12rdquo - 1rdquo 16 Bar1frac14rdquo - 2rdquo 10 Bar

WWWIPLEXCONZ 30IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON POLYPROPYLENE VALVES PRODUCT RANGE

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 frac14rsquorsquo

273540 1 frac12rsquorsquo

273550 2rsquorsquo

Compression Stopcock (16 bar) Product Code Size (mm)

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

274120 20mm

274125 25mm

274132 32mm

Quick Coupling Valve (10 bar) Product Code Size (mm) Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2711 frac34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Check Valve Insert (16 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

272025 25mm

Valve (10 bar) Product Code Size (mm)

Quick Coupling Valve (10 bar) Product Code Size (mm)

2711 34rsquorsquo

2712 1rsquorsquo

Riser Key Product Code Size (mm)

2713 na

Plasson Polypropylene Valves Product Range

Check Valve Insert (16 bar) Product Code Size (mm)

272025 25mm

Valve (10 bar) Product Code Size (mm)

2731 34rsquorsquo

2732 1rsquorsquo

2731 frac34rsquorsquo

2732 1rsquorsquo

Qui

ck C

oupl

ing

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

27

11

34rsquo

rsquo

2712

1rsquo

rsquo

Rise

r Key

Pr

oduc

t Cod

e Si

ze (m

m)

27

13

na

Pla

sson

Pol

ypro

pyle

ne V

alve

s Pr

oduc

t Ran

ge

Chec

k Va

lve

Inse

rt (1

6 ba

r)

Prod

uct C

ode

Size

(mm

)

27

202

5 25

mm

Valv

e (1

0 ba

r)

Prod

uct C

ode

Size

(mm

)

2731

3

4rsquorsquo

2732

1rsquo

rsquo

Water Meter Valve Boxes Product Code Size (mm)

193 155 x 200 x 200 high

193LIDGR 155 x 200

193LIDBL 155 x 200polyethylene (water meter) valve boxes

blue lid green lid

image to go here

Valve box only - no lid Green lid Blue lid

Angle Seat Valve (8 bar) Product Code Size (mm)

273532 1 14rsquorsquo

273540 1 12rsquorsquo

273550 2rsquorsquo

Plasson Polypropylene Valves Product Range

Compression Stopcock (16 bar) Product Code Size (mm)

274120 20mm

274125 25mm

274132 32mm

WWWIPLEXCONZ 31IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

PLASSON SERIES 1 PUSH-FIT COMPRESSION FITTINGS

STEP 1

bull Clean pipe endbull Remove bursbull Mark insertion depth using guide on fittingbull Sizes 40mm and above ndash chamfering the pipe with a Plasson chamfer tool

and using silicone lubricant will ease insertion

STEP 1

bull Use a Plasson Series 1 wrench to loosen the nut

STEP 2

bull Insert pipe past O-ring until it meets the internal stop

STEP 2

bull Remove the nut and slide pipe from fitting When reassembling the fitting ensure the components are placed into the fitting body in the correct orientation and assembly order (Figure 1) Ensure any damaged blunted grip or split rings are replaced

STEP 3

bull Check witness mark to ensure pipe is inserted correctly

Installation Instructions

DisassemblyPlasson Series 1 fittings can be easily disassembled to allow fitting removal or adjustment and can be reassembled for reuse of the fitting

WWWIPLEXCONZ 32IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3501 - 90ordm Elbow Product Code Size (mm)

350120 20mm

350125 25mm

350132 32mm

350140 40mm

350150 50mm

350163 63mm

3504 - 90ordm Tee Product Code Size (mm)

350420 20mm

350425 25mm

350432 32mm

350440 40mm

350450 50mm

350463 63mm

3506 - Female Threaded Adapter Product Code Size (mm) x BSP

35062015 20 x frac12rdquo

35062520 25 x frac34rdquo

35063225 32 x 1rdquo

35064032 40 x 1frac14rdquo

35065040 50 x 1frac12rdquo

35066350 63 x 2rdquo

3508 - 90ordm Female Threaded Elbow Product Code Size (mm) x BSP

35082015 20 x frac12rdquo

35082515 25 x frac12rdquo

35082520 25 x frac34rdquo

35083225 32 x 1rdquo

35085040 50 x 1frac12rdquo

35086350 63 x 2rdquo

3505 - Reducing Tee Product Code Size (mm)

35052520 25 x 20 x 25

35053220 32 x 20 x 32

35053225 32 x 25 x 32

3507 - 90ordm Male Threaded Elbow Product Code Size (mm) x BSP

35072520 25 x frac34rdquo

35073225 32 x 1rdquo

PLASSON SERIES 1 PRODUCT RANGE

3503 - Female Threaded Tee Product Code Size (mm) x BSP

35032015 20 x frac12rdquo

35032515 25 x frac12rdquo

35032520 25 x frac34rdquo

35033225 32 x 1rdquo

3509 - Female Wingback Adapter Product Code Size (mm) x BSP

35092015 20 x frac12rdquo

3510 - Coupling Product Code Size (mm)

351020 20mm

351025 25mm

351032 32mm

351040 40mm

351050 50mm

351063 63mm

3511 - Universal slip repair coupling FampF Product Code Size (mm)

351124-28 24 - 28mm

351131-35 31 - 35mm

351140-43 40 - 43mm

351148-51 48 - 51mm

351160-64 60 - 64mm

3513 ndash Male Threaded Adapter Product Code Size (mm) x BSP

35132015 20 x frac12rdquo

35132520 25 x frac34rdquo

35133225 32 x 1rdquo

35134032 40 x 1frac14rdquo

35135040 50 x 1frac12rdquo

35136350 63 x 2rdquo

3512 - Universal Coupling Product Code Size (mm)

351225 14-18 20 x 14-18

351225 19-22 25 x 19-22

351225 24-28 32 x 24-28

WWWIPLEXCONZ 33IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

3523 - Reducing Coupler Product Code Size (mm)

35232520 25 x 20

35232520 32 x 20

35232525 32 x 25

35234032 40 x 32

35235025 50 x 25

35236350 63 x 50

PLASSON SERIES 1 PRODUCT RANGE

3530 - End Plug Product Code Size (mm)

353020 20mm

353025 25mm

353032 32mm

353040 40mm

353050 50mm

353063 63mm

Plasson Series 1 Wrench Product Code Size (mm)

Wrench2032 20 - 32

Wrench4063 40 - 63

WWWIPLEXCONZ 34IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 3IPLEX PE FITTINGS

BLACKLINE HP DUCTILE IRON FITTINGS PRODUCT RANGE

Product Code Description Pipe OD (mm)

DIC63PE Ductile Iron Coupling 63mm PN25 63mm

DIC90PE Ductile Iron Coupling 90mm PN25 90mm

DIC110PE Ductile Iron Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm)

DITC63PE Ductile Iron Transition Coupling 63mm PN25 63mm

DITC90PE Ductile Iron Transition Coupling 90mm PN25 90mm

DITC110PE Ductile Iron Transition Coupling 110mm PN25 110mm

Product Code Description Pipe OD (mm) x BSP ldquo

SSMTA50 Stainless Steel Male Threaded Adapter 50mm BSP PN25 63 x 2rdquo

SSMTA80 Stainless Steel Male Threaded Adapter 80mm BSP PN25 90 x 3rdquo

SSMTA100 Stainless Steel Male Threaded Adapter 110mm BSP PN25 110 x 4rdquo

Product Code Description Pipe OD (mm) PCD (mm) Hole

Number

DIUFA50 Ductile Iron Universal Flange Adapter 50mm PN25PN25 63mm 120 - 125 4

DIUFA80 Ductile Iron Universal Flange Adapter 80mm PN25 90mm 150 - 160 8

DIUFA100 Ductile Iron Universal Flange Adapter 100mm PN25 110mm 175 - 191 8

Note DITC Transition Coupler is used with either SSMTA (Male BSP Thread Adapter ) or DIUFA (Flange Adapter)

STEP 1 MarkingUse a pen and tape measure to place marks 25mm from the end of each pipe Ensure the pipe ends to be joined are accurately cut square and are totally free of any dirt or surface damage

STEP 2 Gasket MountingUsing a silicone based lubricant slip the gasket over the pipe ends and center the gasket between the marks Ensure the pipe ends are butted together

STEP 3 Fitting AssemblyPlace the housing over the gasket and insert bolts Then tighten the nuts by hand

STEP 4 Tightening NutsUsing an appropriate tool tighten the nuts sequentially until the fittingsrsquo housing bolt pads meet metal to metal

Iplex Blacklinetrade HP Ductile Iron fittings are designed to mechanically join PE 100 Polyethylene pipe up to pressure rating PN25 (25-bar) Note Iplex Blacklinetrade HP fittings are not intended for use on other types of Iplex pipes

ASSEMBLY INSTRUCTIONS

NOTES

WWWIPLEXCONZ 36IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 36

IPLE

X M

OB

ILE

EXTR

US

ION

WWWIPLEXCONZ 37IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX MOBILE EXTRUSION

Iplex ndash Mobile Extrusion is an innovative new mobile manufacturing plant that can be relocated to larger pipeline projects for onsite manufacture of high quality PE100 polyethylene pipe to ASNZS 4130 ranging in diameter from DN75 to DN710 (Pressure Classes from PN6 ndash PN16 dependent on pipe size) and extruded in lengths up to 100m

Key Benefits

1 Asset Owner The requirements for an Asset Owner is asset integrity and security of supply Iplex ndash Mobile Extrusion offers the following benefits to the Asset Owner bull German technology that allows for onsite

manufacturing bull Sign off processes for each length of pipe suppliedbull Longer lengths fewer welded joints bull Pipe supplied will comply with ASNZS 4130 2 Consultants Consultants want the ability to easily specify reliable systems that they can trust Iplex ndash Mobile Extrusion uses German technology for onsite manufacturing and quality assurance measurement Onsite manufacturing using the Iplex ndash Mobile Extrusion plant delivers quality PE 100 polyethylene assets for large infrastructure projects bull Pipe supplied will comply with ASNZS 4130 bull PE 100 material complies with ASNZS 4131 and PIPA

Guideline POP004 bull German engineering extrusion technology bull German quality measurement technology (by Sikora)

3 ContractorsA successful project for a contractor is about cost-effective solutions and ease of installation Iplex ndash Mobile Extrusion offers an innovative onsite manufacturing process Lengths and fewer welds allow new smarter installation techniques to be adopted which may result in quicker project completionbull Longer Lengths bull Fewer welds bull Onsite manufacture bull Range of sizes available DN75 to DN710

SECTION 4IPLEX MOBILE EXTRUSION

WWWIPLEXCONZ 38IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

IPLEX MOVING PIPE ONSITE

Iplex ndash Mobile Extrusion plant produces high quality PE100 polyethylene pipe ranging anywhere in diameter from DN75 to DN710 (Pressure Classes from PN6 to PN16 dependent on pipe size) One of the key benefits of onsite manufacturing is that pipe can be extruded and handled in long continuous lengths up to 100m This greatly reduces the amount of joints and welds required in a pipeline asset

Moving pipe onsite is facilitated by the use of wheel dollies which allow the pipe to be easily towed to the required location Wheel dollies can be made in a variety of designs and are typically part of the contractorrsquos responsibility on a project

Spacing of wheel dollies is dependent on the size and weight of the pipe It is important that the correct spacing of wheel dollies is used when moving pipe For assistance on spacings please call Iplex Customer Support on 0800 800 262 and speak to our technical sales team

Iplex PE 100 pressure pipe extruded on site in the Central Plains

WWWIPLEXCONZ 39IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX QUALITY STANDARDS

bull Pipe supplied will comply with ASNZS 4130bull Iplex ndash Mobile Extrusion plant is the latest in German

engineering and extrusion technology (Powered by Tubi)

bull Precision in line wall thickness measurement technology (by Sikora) is used to consistently produce pipe with the dimensional specifications required

bull A valid Standards Mark Licence can be provided prior to project start

bull All projects are provided with the relevant compliance and quality documentation

bull A handover quality check and sign off process are conducted onsite

IPLEX ENVIRONMENTAL CONDITIONS

Manufacturing in a variety of environmental conditions is fully expected This includes high humidity cold winter conditions hot dry summer conditions and dusty environments The Iplex ndash Mobile Extrusion plant is climate controlled with the specifically designed containerised set up Raw materials are kept dry and free from contamination at all stages of the handling process through a closed loop material feed and specialised driers

SECTION 4IPLEX MOBILE EXTRUSION

Iplex PE Duct being extruded at the Iplex Ashburton plant

WWWIPLEXCONZ 40IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

SECTION 4IPLEX MOBILE EXTRUSION

Sikora in-line wall measurement technology used with Iplex Mobile Extrusion

NOTES

WWWIPLEXCONZ 42IPLEX PE PRESSURE SYSTEMS - JULY 2020IPLEX ENERGY AND COMMUNICATIONS - MARCH 2020 42

INST

ALL

ATI

ON

WWWIPLEXCONZ 43IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

INSTALLATION

Trenchless Installation Iplex PE pressure pipes may be installed either using trenchless methods such as Horizontal Directional Drilling Pipe Bursting and Slip Lining or by conventional open-cut trench methods Guidelines for trenchless installation may be found on the Australasian Society for Trenchless Technology (ASTT) website

Open-Cut Trench Installation Bedding particle size Bedding material in direct contact with the pipe including directly under alongside and directly above the pipe must be compactible non-cohesive material not exceeding 20mm maximum particle size This may include approved imported aggregate or approved selected screened as-dug material compliant to the contract specification

Backfill materials Trench backfill material may include approved imported compactible aggregate or other approved selected as-dug material compliant to the contract specification

Backfill compaction As with any buried flexible pipe including any type of PE pipe compaction of the backfill under and alongside the pipe barrel is important to ensure good structural performance of the backfill and also of the completed pipeline The correct sequence of backfill actions includes placement and compaction of the bedding under the pipe and secondly beside and surrounding the pipe barrel BEFORE placement and compaction of trench backfill above the bedding zone

Field Testing All pressure pipelines should be field tested to uncover any faults during pipeline construction You must check that

bull All pipe-joints including butt fusion or electro fusion joints have been made correctly

bull All pipeline components valves hydrants bends tees tapping bands and any other fittings have been installed correctly

bull To determine that the pipeline will handle pressure greater than its design pressuremdash without leaking

Best Practice Open-Cut Installation Please consult the Iplex Installation guides lsquoPolyPete - How I Install PE Pipesrsquo and lsquoPolyPete - How I Field Test PE Pipelines For Iplexrsquos recommendation for Iplexrsquos recommendation for best practice installation refer to wwwiplexconziplex-resources You can also contact Iplexrsquos technical support on 0800 800 262

SECTION 5INSTALLATION

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

WWWIPLEXCONZ 44IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

ABOUT IPLEXABOUT IPLEX

Quality Assurance

Creating products of consistently high quality is at the forefront of the Iplex manufacturing process and central to the customer promise that Iplex product quality meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companyrsquos QMS Continued third-party product certification of Iplex plastic pipeline products to relevant Australian amp New Zealand standards is also provided by these bodies

The Iplex mechanical testing laboratory in Palmerston North is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

CERTIFICATE TYPE LICENCE NUMBER CERTIFYING BODY

ISO 9001 QEC4169 SAI Global

ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global

ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global

ASNZS 1477 SMK02569 amp SMKP20181 SAI Global

ASNZS 4130 SMKP20400 SAI Global

ASNZS 4441 SMKP20682 SAI Global

ASNZS 4765 SMK02570 SAI Global

ASNZS 61386 LIC2901 amp LIC2910 Bureau Veritas

NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

QUALITY MANAGEMENT SYSTEM Quality Assurance

Creating products of consistently high quality is at the forefront of our manufacturing process and central to our customer promise that Iplex Product quality always meets or exceeds standards claimed

All Iplex manufacturing plants operate under a strict ISO 9001 Quality Management System (QMS) External certifying bodies carry out regular audits to provide third-party certification of the Companys QMS Continued third-party product certification of our wide of plastic pipeline products to relevant Australian amp New Zealand Standards is also provided by these bodies

Our laboratory is an IANZ accredited facility providing added assurance that any measurement and testing is carried out professionally and in a technically reliable manner in accordance with international standards

Certificate Type Licence Number Certifying Body ISO 9001 QEC4169 SAI Global ASNZS 1254 SMKP20126 amp SMKP20180 SAI Global ASNZS 1260 SMKP20184 SMKP20185 amp SMK1305 SAI Global ASNZS 1477 SMK02569 SAI Global ASNZS 4130 SMKP20400 SAI Global ASNZS 4441 SMKP20682 SAI Global ASNZS 4765 SMK02570 SAI Global ASNZS 61386 LIC 2901 Bureau Veritas NZ ISOIEC 17025 ACCREDITATION NUMBER 61 IANZ

IPLEX QUALITY MANAGEMENT SYSTEMS

WWWIPLEXCONZ 45IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

Iplex is one of New Zealandrsquos leading manufacturers and suppliers of plastic pipeline systems Iplex provides products and services throughout New Zealand and to export markets around the Pacific and other international markets Iplex has manufacturing operations in Palmerston North Christchurch and Ashburton as well as access to the Iplex Australian network

Iplex have been manufacturing plastic pipelines since 1938 and with over 80 years of industry service and technical experience

Civil Iplex provides a wide range of solutions for wastewater drainage and potable water pipeline projects Manufacturing both PE (Polyethylene) amp PVC (Polyvinylchloride) for both pressure and non-pressure (gravity fed) pipeline systems including civil infrastructure drainage systems and roading systems

Iplex also services the following industry sectors

Energy and Communications an important sector for Iplex NZ and there is a wide range of conduits ducts and fittings available for new development and maintenance projects The range covers electrical communication and gas

Plumbing The Iplex plumbing sector covers pipes and fittings used within the property boundary This includes reticulation of potable and non-potable water sanitary plumbing wastewater drainage and gas reticulation Iplex have the capabilities of supplying drain waste and vent pipes and fittings rainwater systems traps and accessories

Rural Iplex also service the rural market providing pipes and fittings for rural use Iplex provide systems for irrigation stock water land drainage culverts and farm dairy effluent

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

19

ABOUT IPLEX NEW ZEALAND

ABOUT IPLEX NEW ZEALAND

Iplex Pipelines the Company

Iplex Pipelines is a leading manufacturer and supplier of plastic pipeline systems in Australasia servicing local and export markets throughout New Zealand Australia the Pacific and other International markets Iplex operates manufacturingdistribution sites in New Zealand and within every Australian State

Markets and applications for our product range in New Zealand include water reticulation and transmission mains sewerage reticulation and carrier mains stormwater drainage trenchless pipe systems chemical and process water circuits slurry and tailings pipe systems drain waste and vent plumbing domestic hot and cold water plumbing subsoil drainage systems turf watering stock watering horticultural irrigation systems and broad acre irrigation systems

Company History

Founded in 1938 as Iplex Plastics the company played a leading role in the development of plastic components over many years Then in 1962 Iplex was a pioneer in the introduction of plastic pipes Iplex Pipelines was one of the first companies to produce Unplasticised Polyvinyl chloride (PVC-U) pipe and fitting systems in New Zealand and has pioneered many significant developments of PVC systems for Drain Waste and Vent (DWV) applications in Australasia

Iplex Pipelines operates today as part of the Fletcher Building global community with more than 19000 people across 40 countries Dual-listed on both the New Zealand Stock Exchange (NZX) and the Australian Securities Exchange (ASX) under the ticker code FBU Fletcher Building is an integrated manufacturer and distributor of infrastructure and building products whilst including subsidiaries Fletcher Construction and Fletcher Residential New Zealandrsquos leading general contractor and residential home builder respectively

Iplex Pipelines manufacturing plant and distribution hub in Palmerston North city New Zealand

ABOUT IPLEX

IPLEX PIPELINES NZ THE COMPANY

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

LIMITATIONS

The information contained in this document is current as at August 2020 and is based on data available to Iplex Pipelines NZ Ltd at the time of going to print All photographic images are intended to provide a general impression only and should not be relied upon as an accurate example of Iplex Pipelines NZ Ltd products installed in accordance with this document or the referenced compliance documents

This publication replaces all previous Iplex Pipelines NZ design information and literature relating to Iplex Pipelines NZ Ltd PE Pressure Systems products Iplex Pipelines NZ Ltd reserves the right to change the information contained in this document without prior notice It is your responsibility to ensure that you have the most up to date information available You can call toll free on 0800 800 262 or visit wwwiplexconz to obtain current information

Iplex Pipelines NZ Ltd has used all reasonable endeavours to ensure the accuracy and reliability of the information contained in this document However to the maximum extent permitted by law Iplex Pipelines NZ Ltd assumes no responsibility or liability for any inaccuracies omissions or errors in this information nor for any actions taken in reliance on this information Pipes and fittings have been shown as typical configurations however in some cases product dimensions may vary or be changed without notice In all instances the reader should contact Iplex Pipelines for clarification that the specific product is appropriate for their circumstance

TRADEMARKS

The name Iplex Iplex Poliplex Iplex Blueline and Iplex Blackline are registered trademarks of Fletcher Building Holdings Limited

COPYRIGHT

copy Copyright 2020 Iplex Pipelines NZ Ltd All of the material contained in this brochure including all text tables charts graphs drawings images and diagrams are protected by copyright These materials may not be reproduced adapted or transmitted in any form by any process without the permission of Iplex Pipelines NZ Ltd

PE PRESSURE SYSTEMS SPECIFICATION AND INSTALLATION GUIDE AUGUST 2020

WWWIPLEXCONZ 46IPLEX PE PRESSURE SYSTEMS - AUGUST 2020

IPLEX PIPELINES NZ LIMITED 0800 800 262

AUCKLAND PRIVATE BAG 92 114 810 GREAT SOUTH ROAD PENROSEPALMERSTON NORTH PRIVATE BAG 11019 67 MALDEN STREET

CHRISTCHURCH PO BOX 16225 22 BRAEBURN DRIVE SOCKBURNASHBURTON 13 ASHFORD AVENUE NEWLANDS

wwwiplexconz

Page 15: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 16: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 17: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 18: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 19: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 20: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 21: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 22: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 23: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 24: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 25: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 26: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 27: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 28: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 29: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 30: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 31: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 32: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 33: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 34: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 35: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 36: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 37: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 38: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 39: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 40: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 41: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 42: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 43: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 44: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 45: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 46: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 47: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS
Page 48: ENERGY & COMMS SYSTEMS PE PRESSURE SYSTEMS