enelion Wallbox Duo · Housing allows freedom in configuration of power grid cabling: either from the top or bottom of the charger. The max output power is 7,4kW per socket in Wallbox

Complex communication

Two sockets in a small housing

enelionWallbox Duo

Enelion Wallbox Duo is a multi-EV-charging-point device. It can charge two cars at the same time. When installed in the network of such chargers, they can provide charging power for several EVs with Dynamic Load Balancing.

Robust construction

Dynamic Load Balancing

Anodised housing

easy installation Housing allows freedom in configuration of power grid cabling: either from the top or bottom of the charger. The max output power is 7,4kW per socket in Wallbox Duo. Wallbox Duo Power and Wallbox Adspace offer 22kW per socket. Small footprint of the device gives you more options for arrangement in the parking space.

Aesthetics is essentialProduct’s casing is made of anodised aluminium and offered in the following colours: graphite-black and silver. The front panel is black and made of a scratch proof plexiglass. Charger has two Type 2 charging sockets, one RFID card reader and one OLED dispaly. Charger’s interface has been designed for ease of use and functionality. Clear OLED display along with visible and understandable LED light strips make the charger elegant and easy to use.

CommuniCAtion

gsm, WiFi, ethernet Communication Enelion chargers can be connected to the network of up to 90 charging stations. This feature allows for use of only one Enelion Bridge to provide Internet communication to all of the chargers. dynamic Load Balancing Intelligent load balancing system allows to share available power between charging stations so they can use the power from distribution box in the most efficient way. oCPP CompatibleEnelion chargers equiped with Enelion Bridge are compatilble with OCPP1.6. This allows for use Enelion administrative system Enelink or other compatible solutions.

teChniCAL sPeCiFiCAtion

WALLBox AdsPACe

Wallbox with two sockets

Safe charging 2x 1,4 kW - 7,4 kW 2x 1,4 kW - 22 kW 2x 1,4 kW - 22 kW

Socket / Cable 2 x type 2 socket 2 x type 2 socket 2 x type 2 socket

Communication OCPP 1.6 Protocol offline / Enelion Bridge offline / Enelion Bridge offline / Enelion Bridge

OLED + RFID reader / 2x programmable Buttons built-in built-in built-in

Dynamic Load Balancing (DLB) Enelion DLB Enelion DLB Enelion DLB

Energy meter (separately for each phase voltage) built-in / Enelion MID [1] built-in / Enelion MID [1] built-in / Enelion MID [1]

RCD RCD A / Enelion RCD B RCD A / Enelion RCD B RCD A / Enelion RCD B

Socket with blocking built-in built-in built-in

IK Classification IK 10 IK 10 IK 10

IP Classification IP 54 IP 54 IP 54

Operating temperature -20°C / + 55°C -20°C / + 55°C -20°C / + 55°C

Height (mm) 250 250 250

Width (mm) 390 530 1000

Depth (mm) 150 150 150

enelion Wallbox DUO

ENELION Sp. z o.o. | 50 Pana Tadeusza St 80–123 | Gdansk | Poland

[email protected] enelion.com

1. Certified energy measurement

WALLBox duo PoWer

Wallboxes Duo provide practical solutions - two charging outlets and comfortable usage: touch button, RFID card or plug & charge mode. Additionally Wallbox AdSpace can be branded with a chosen logo. Wallbox duo Power Provides user access to two 22kW power outlets each. Enelion is the only manufacturer on the market to offer such a unique and compact solution.

WALLBox duo

The best canvas for your logo!

enelionStilo

Flat charger with wide options


CommuniCAtion increase your charging stations ability with the enelion Bridge The mobile app enables to control the charger, view charging statistics and configure the device in an advanced way. dynamic Load Balancing Intelligent load balancing system allows to share available power between charging stations so they can use the power from distribution box in the most efficient way.

home Power BalancingOptionally, home power balancing can be applied (charger uses power only available at that moment). oCPP CompatibleEnelion chargers equiped with Enelion Bridgeare compatilble with OCPP1.6. This allows for useEnelion administrative system Enelink or othercompatible solutions.

FuLL PersonALizAtion

Flat, aluminium housingBesides the attractive looks Stilo fullfills everyday need of a charging process. That is why it is com-pleted with permanently attached charging cable: Type 2 or Type 1. The cable is easily kept on a hanger which is another element that can be personalized. This charger provides an output power from 1,4 kW up to 22 kW. Stilo’s working status is communicated by LEDs on the top of the charger (charging process - green, idle state - blue, etc.). APPLiCAtion

Automotive industry - as an end user home charger, with 3D car’s badge, Fleets - as a personalized fleet charger, hotels - with hotel’s branding, etc.

Stilo is the most practical charger in the offer. With its flat and anodised aluminium housing has a strong touch of an elegant design. Perfectly proportioned housing can be personalized with a chosen client’s logo.

Home Power Balancing

Personalized Stilo with 3D badge or engraved logo

teChniCAL sPeCiFiCAtion stiLo

Safe charging 1,4 kW - 22 kW

Cable 4m type 2 / type 1

Communication OCPP 1.6 Protocol offline / Enelion Bridge

RFID reader built-in

Dynamic Load Balancing (DLB) Enelion DLB

Energy meter (separately for each phase voltage) built-in

RCD RCD A / Enelion RCD B

RGB LED charging status indicator built-in

IK Classification IK 10

IP Classification IP 54

Operating temperature -25°C / + 55°C

Height (mm) 430

Width (mm) 185

Depth (mm) 56

enelion Stilo



Functionality and aesthetics

enelionWallbox

Enelion Wallbox is the most universal device offered. Its module-based condtruction allows for freedom in configuration through whole time od useage. Device can be equiped with Enelion Bridge module providing OCPP 1.6 functionality.

APPLiCAtion

increase your charging stations abilities with the enelion Bridge OCPP1.6 protocol allows to use advanced features of Administrative system like users management, dynamic charging prices, charger station control and many more! The mobile app enables to control the charger, view charging statistics and configure the device in an advanced way.

Office Car Park Easy installation in a convenient garage space.

Multitasking Possibility to integrate with parking payment systems.

Fleet of vehicles Thanks to the Enelink software management of your chargers has never been so convenient!

CommuniCAtion

gsm, WiFi, ethernet Communication Enelion chargers can be connected to the network of up to 90 charging stations. This feature allows for use of only one Enelion Bridge to provide Internet communication to all of the chargers. dynamic Load Balancing Intelligent load balancing system allows to share available power between charging stations so they can use the power from distribution box in the most efficient way.


Robust construction


WALLBox eAsY WALLBox

Product’s casing is made of anodised aluminium and offered in the following colours: graphite-black and silver. The front panel is black and made of a scratch proof plexiglass. Charger has a Type 2 charging socket, RFID card reader and OLED graphic dispaly. Charger’s activity is communicated by LEDs on both sides of the socket (charging process - green, idle state - blue).

Wallbox eAsY

The Easy Series charger provides the basicfunctionality and practical connectionwithout the need for an electrician.

World class design in two colors of anodized aluminum

enelion Wallbox



Safe charging 3,7 kW, 11 kW, 22 kW 1,4 kW - 22 kW

Socket / Cable type 2 socket type 2 socket

Communication OCPP 1.6 Protocol offline offline / Enelion Bridge [3]

OLED graphic display + RFID reader / OLED graphic display + RFID reader +functional buttons - built-in

Dynamic Load Balancing (DLB) - - / Enelion DLB [3]

Energy meter (separately for each phase voltage) built-in built-in / Enelion MID [1]

RCD A built-in RCD A built-in RCD A / Enelion RCD B [3]

Power cable attached [1] [2] -

Socket-Lock - built-in

IK Classification IK 10 IK 10

IP Classification IP 54 IP 54

Operating temperature -20°C / + 55°C -20°C / + 55°C

Height (mm) 271 271

Width (mm) 249 249

Depth (mm) 156 156


1. Certified energy measurement / 2. Installing operations are simplified thanks to quick connection to a 380V socket / 3. Accessory sold seperately

Solid construction

Module replacement in 2 min.

Durable, safe and esthetic part of urban infrastructure.

enelionVertica

Enelion Vertica has an aluminium casing which is resistant to any atmospheric conditions. Online function-ality gives you the essential features to serve consumers in public space.

Dynamic Load Balancing (DLB)

Prefabricated foundation allows fast installation

designed for public and commercial spaces Vertica charging station fits perfectly into most surroundings. The elegant design means that the charger blends with the aesthetics of the city. Parking lots in the urban space Enelion Vertica devices are connected to your network, to provide power charging up to 22 kW from each socket in charging station.

CommuniCAtion

gsm, WiFi, ethernet Communication Enelion chargers can be connected to the network of up to 90 charging stations. This feature allows for use of only one Enelion Bridge to provide Internet communication to all of the chargers. dynamic Load Balancing (dLB) Intelligent load balancing system allows to share available power between charging stations so they can use the power from distribution box in the most efficient way.

VertiCA soCKet VertiCA CABLe

enelion Vertica

Enelion Vertica housing is made of anodised aluminium, which makes it resistant to atmospheric conditions. Assembly is easy and intuitive,and replacing the charging module takes less than 2 minutes. Comfortable connection to the car is provided by the attached cable with a plug type 1 or 2. The Spiral Power Cable doesn’t tangle and comes back automatically in its place after the charging process

Modular housing in two colors




Safe charging 1,4 kW - 22 kW per socket 1,4 kW - 22 kW per socket

Socket / plug type up to two type 2 sockets up to two type 2 cables

Socket-Lock built-in -

Spiral Power Cable - max 4 m

OLED graphic display + RFID reader + functional buttons built-in built-in

RCD built in RCD A / Enelion RCD B [3] [4] built in RCD A / Enelion RCD B [3] [4]

Communication OCPP 1.6 Protocol offline / Enelion Bridge [3] offline / Enelion Bridge [3]

Energy meter built-in / Enelion MID [3] built-in / Enelion MID [3]

IK Classification IK 10 IK 10

IP Classification IP 54 IP 54

Operating temperature -20°C / + 55°C -20°C / + 55°C

Height (mm) 1310 1310

Diameter (mm) 250 250 + Cable

1. Certified energy measurement / 2. Installing operations are simplified thanks to quick connection to a 380V socket / 3. accessory sold separately / 4. build in RCD A with RCM B

ACCessories

energy managementThe Enelion software offers advanced energy management: the user can define schedules for limiting the charging power and assign them to individual charging stations. enelion dLB (dynamic Load Balancing) The total charging power available to the chargingstations is dynamically adjusted accordingly to the power consumption throughout the building.

CommuniCAtion

gsm, WiFi, ethernet CommunicationEnelion chargers can be connected to the network of up to 90 charging stations. This feature allows for use of only one Enelion Bridge to provide Internet communication to all of the chargers. security and privacyAll communication channels to our servers offer TLS and SSL encryption, the API tokens expire every 24h to prevent identity theft and the passwords are stored using a secure salted hashing scheme.

Connecting chargers in a network easily



Modularity of Enelion chargers makes them the most agile system on the market

enelionAccessories

ENELION Sp. z o.o. | Pana Tadeusza 50 80–123 | Gdańsk | Polska

[email protected] www.enelion.com

1 Bridge

Enelion Bridge helps to transform your charger. Thanks to this device you can connect your charger to any provider of administrative services via the Internet. The Bridge accessory adds a OCPP1.6. standard compatibility to the device’s functionality. It allows the charging station manager to access the full range of functionalities, such as authorizing users, remote charging process control or collecting information on the energy intake. Use a convenient GSM* and WiFi or Ethernet connection for greater reliability.The accessory may be installed on your own even when the charger is already mounted. Moreover, when the charger equipped with a Bridge accessory is connected to other Enelion charging stations via Enelion network protocol, all chargers will gain the above mentioned functionalities! * 2G as standard. LTE is also available as an option.

3 eneLion rCdB

The Enelion devices are accurately tested in order to maintain the highest standards of security. They are equipped with systems protecting against improper connection of the device, as well as against a possible occurrence of residual current. In such cases the device will react respectively in order to secure the safety of all users. However, according to some national regulations it is necessary to have additional protection against DC current leakage. This may occur when the charging station is used to charge a vehicle with a faulty charging system or battery. To secure additional protection we offer the Enelion RCDB. The accessory is compatible with all Enelion devices and provides the electronic circuit with information that enables a proper response from the device once DC current leakage is detected. The accessory may be installed on your own even when the charger is already mounted.

2 eneLion mid3F

All Enelion chargers have an in-built system of measuring the power intake. This allows for our devices to run advanced load balancing algorithms. However, according to some national regulations in order to provide users with charging services based on the energy they consumed, the measurement must be done with the use of a MID certified counter. The Enelion devices are compatible with the offered Enelion MID3F accessory, which may be installed in the charger on your own even when the charger is already mounted. The device will automatically replace the readouts from the in-built counter with the readouts from the certified counter. These will be shown both on the device’s display, as well as in the administrative system for each transaction.

4 eneLion dLB Enelion is preparing electromobility for what is to come. It is estimated that within the next 10 years electric cars will be the most numerous electric power consumers. To enable approaching revolution, we must provide solutions which will allow for efficient use of electric vehicles within the frames of current infrastructure. Enelion DLB is a system thanks to which the present power connections will be able to provide optimal charging conditions for charging multiple cars at a time. Thanks to the power of communication provided by networking, the connected charging stations may share the available power depending on the need. When only one vehicle is being charged in the network, it will receive the maximum power. When more vehicles appear, the power will be shared out depending on the need. The devices are even able to react in real time when changes occur, providing the most efficient way of charging.

AutoDealer

AutoDealerAutoDealer

AutoDealer

AutoDealer

AutoDealer 40kwh

40kwh

40kwh

20kwh

40kwh

40kwh

40kwh

40kwh

1

32

24

Electric mobilityat the Car DealershipManaging the charging processes, storing and selling energy

the Future CAr deALer’s

revolution in the automotive industryElectric mobility is revolutionizing the automotive industry, as well as the energy sector, at a rapid pace. In the nearest future car dealers will face the ever increasing demand for electric energy. Changes at the Car dealer’s over time In order to prepare the Car Dealer properly for the growing number of EVs, the installation of both slow and fast chargers must be correctly planned. Power installed in the building has to be taken to account.

When planning installation for charging stations it is worth considering the target demand for powering vehicles. It is also very important to properly manage the power through an IT system.

not onLY ChArgers

energy storageIn the future the retired battery packs will be used for storing energy at the Car Dealer’s office.

Photovoltaic The panels can be integrated with a system of module DC chargers without the extra costs of inverters.

selling energy and dsrCompanies from the energy sector will be interested in the service of storing energy at the Car Dealer’s offices.

Administrative software

Connecting chargers in a network easily


ENELION Sp. z o.o. | Pana Tadeusza 50 80–123 | Gdańsk | Polska

[email protected] www.enelion.com

1 First ChArging At the CAr deALer’s Installing 1-2 alternating current chargers (up to 22kW). No IT system to provide administrating services and to manage power. A shift in the power intake at the Car Dealer’s office and the car service does not influence the charging power.

3 A dC ChArger sYstem

Once the number of AC chargers is increased, the level of available power at the connection is not high. When installing a 50-150kW DC charger you should set the priority of using power for the DC charger at the expense of the AC chargers in the administrative system. When charging with direct current is in process (20-30 minutes) the AC chargers will decrease their power significantly.

2 greAter numBer oF AC ChArgers

When increasing the number of alternating current chargers measurement of energy of the connection should be introduced. A shift in the power intake at

the Car Dealer’s office or the car service has an impact on the charging power – chargers automatically reduce the power for the period of increased energy

consumed by the Dealer’s office. If there are more vehicles, they share the available energy among each other (Dynamic Load Balancing).

Administrative software Enelink lets you influence the operation of the system and enables you to sell energy from the chargers.

4 the Future CAr deALer’s

Given the revolution in electric mobility and in the energy sector it is worth changing the way we see the Car Dealer as a place with the sole purpose

of selling and servicing cars. A Car Dealer may become an energy hub which will on the one hand allow the dealers to charge their vehicles and sell energy

to other EV users, but will also be able to store and produce energy (photovoltaic panels). The used battery packs will have 50-60% of available power to be used as an energy storing unit for more than 10 years to come.

Companies from the energy sector will use such hub very willingly for commercial use, as a grid stabilizing element (DSR).

To fully use the potential of our ecosystem Enelion has designed module AC-DC and DC-DC power inverters which may both charge and discharge a vehicle or

battery packs, convert energy from photovoltaic panels to be used at the Car Dealer or to be given back to the network. The proper functioning of the system is

secured by an administrative software.

AutoDealer

AutoDealer

1

1

AutoDealer

AutoDealer

1

32

AutoDealer

AutoDealer 40kwh

40kwh

40kwh

20kwh

40kwh

40kwh

40kwh

40kwh

1

32

24

AutoDealer

AutoDealer

1

2

Complex system of managment to facilitate making business in electromobility.

SystemEnelink

System Enelink offers services for Operators and Charging Providers. Clients can search, book and pay using dedicated mobile app.

Building complex business modelsat the electromobility market.When you are a user of System Enelink you do not have to worry about anything what is connected with the electromobility market. We will help you build your own business, advising you what conditions must be implemented for the Operator to install a charging station and which way Charging Developer may define fares and account payments.

APPLiCAtion

support for independents station Charging operators and Charging services Providers.Enelink Software are agreed with the Polish Act of Electromobility.Ensure assistance in implementation Your tasks related to caring for high service level, even if you are only a Provider Charging Services and you do not have your own charging stations. software as a service (saas)or installation on your own server. You can use the software after just a few minutes of configuration by purchasing Cloud App. You are concerned about your safety data? You can also buy the installation version on your own server.

BuILDIng ManagEMEnT

EnERgETICS LOCaL gOVERnMEnTS

FLEET CaR DEaLERShIP

InDEPEnDEnT PROVIDERChaRgIng SERVICES

compatibility with charging stations

Security: TLS and SSL encryption

Expanded payment system

Fleet Car dealership

independent provider Charging serviCes

Building management

loCal governments

energetiCs

enelink system FunCtions

station operator

► manage your team You don‘t have to take care of your charging station in person. You can specify team accounts

with different permissions only to perform specific actions.

► operator System Enelink offer the possibility of dividing the network of connectors into smaller

operators who will they only had access to their devices.

► Charging station management You can check the status of your charging station. Thanks to the connection to the Enelink

system, most of the service will be done remotely.

► smart charging Do you want to install a lot of charging points without increasing the power connection ?All

you have to do is set a charging plan that will limit the station‘s power in a timely manner.

► Labeling Wszystkie stacje ładowania możesz dowolnie oznaczyć za pomocą etykiet.

Dzięki temu łatwiej będzie Ci zarządzać stacjami z danej etykiety. Następnie

będziesz mógł kilkoma kliknięciami udostępnić je użytkownikom.

provider serviCes

► Customer management tool, transaction and rFid card preview Sprawdź kto może korzystać z Twoich usług ładowania. Przygotuj raporty i billingi związane

z ładowaniem. Pozwól użytkownikom na szybkie rozpoczęcie ładowania

za pomocą kart RFID oraz kontroluj okres obowiązywania kart.

► Labels Dowolnie oznaczaj swoich użytkowników za pomocą etykiet.

► tariff Wprowadzaj taryfy, które pomogą zoptymalizować zarobki na stacjach ładowania.

► Policy Chcesz, żeby użytkownicy wiedzieli o każdej zmianie w regulaminie Twoich usług?

Po prostu dodaj kolejną wersję, a system sam zadba o pobranie zgody od Twoich klientów.

Client appliCation

► Charging Point map Pomóż Klientom łatwo znaleźć stacje, z których mogą skorzystać.

► Payments and charging history Dzięki podpięciu karty płatniczej do konta, system będzie pobierał opłaty

automatycznie. Klient ma w każdej chwili dostęp do pełnej historii.

else

► Fleet solutions Dzięki oprogramowaniu Enelink operatorzy flot mogą zarządzać ładowaniem pojazdów nie

tylko w miejscu pracy. Możliwe jest również rozliczanie sesji ładowania pojazdu służbowego

w garażu domowym pracownika.

► dynamic Load management Dzięki autorskim rozwiązaniom, nie musisz martwić się o stabilność swojej sieci

elektrycznej. System sam dopasuje warunki ładowania tak, by wykorzystać jak najlepiej

dostępną moc.

► dynamic tariff Wprowadź atrakcyjną ofertę dla każdego Klienta. Zachęcaj ich do ładowania

w określonych miejscach, wprowadzaj kupony rabatowe i programy VIP.

ENELION Sp. z o.o. | ul. Pana Tadeusza 50 80–123 | Gdańsk | Polska

[email protected] enelion.pl

Documents

enelion Wallbox Duo · Housing allows freedom in configuration of power grid cabling: either from the top or bottom of the charger. The max output power is 7,4kW per socket in Wallbox